Home

JVC GV-DS2 User's Manual

image

Contents

1. JLIP VIDEO PRODUCER File Edit Window ID Change E COUN Device Change oE Fe BPOW Change Recorder Select PR RecordTiming _ SCENE START f eg Standard l Fal SCENE Counter Reset Long TOUT sj EP Function Set bl E Close Selial TC Initialize BEI ELAPSED TIME 00 00 00 00F 25 lt IN OUT Dubbing You can record all programmed scenes onto the tape in the recording deck PREPARE NEW TAPE Make sure the erase protection tab on the tape is present Then insert it into the recording deck and set the recording deck to the Record Pause mode 2 START EDITING Click START on the JLIP VIDEO PRODUCER window When editing stops the camcorder enters the Stop mode and the recording deck enters the Record Pause mode e During dubbing do no operation other than pressing STOP If other opera tions are done a malfunction may occur STOP EDITING Stop the recording deck NOTES Also refer to the camcorder s instruction manual on dubbing e There be small margin between the CUT IN OUT points you input and the dubbed scenes ones e Dubbing is impossible using a camcorder whose JLIP connector serves
2. File Edit Window ID Change EOUN Device Change 00 SPOW Change MEMO SESS e Recorder Select PROGH Record Timing SCENE START Preroll 5 CUT OUT Function Set 4 Close Selial Initialize ELAPSED TIME 00 00 00 00F 5 JLIP VIDEO PRODUCER File Edit window Help a ee TE POW Name Change Recorder Select PROGH Recor tiing SCENE _START Ee 5 Counter Reset CUT OUT Function Set lose Selia Initialize 5 Em zy ELAPSED TIME 00 00 00 00F EQ ED 10 1110105 IN OUT _ _ MT Counter reset It is possible to reset the counter of the connected video device VHS VHS C 7 REWIND TAPE TO BEGINNING RESET COUNTER Click Set up Counter Reset on the JLIP VIDEO PRODUCER window connected recording deck counter is reset NOTE The counter on digital camcorders cannot be reset When Using the Video Capture Software The JLIP Video Producer Software and JLIP Video Capture Software cannot run simultaneously When you want to run the JLIP Video Capture Software
3. Enter folder name Enter title name Folder c capture index001 Title Untitled 1 fam capture Cancel E Select directory Select drive SAVE THE FULL IMAGE DATA You can save a file under another name or in another folder so that you can edit it without losing the original By processing the captured images with commercially available image editing software you can create your own unique and highly personal illustrations and graphics for incorporation into everything from postcards to newsletters and Internet homepages 1 Click the image display box of the Index New Album Ctrl N No to be saved Open Album Ctrl O M Save Album Ctrl S The image display box is framed in green Open JLIP File Save As JLIP File Save Image As Ctrl A Click File Save Image As on the menu bar Save Image As Index No window appears Click the name of the desired folder directory in the Select Directory box and enter the file name NOTE It is not possible to change the image format when saving the full image data p 32 If the full image data has not been transferred to the computer it is not possible to save it First transfer the full image data then save it When saving the data to floppy disk enter the drive name as well 4 Click OK 32m PICTURE FORMAT SETTING SELE
4. pg 37 Save Image As gt 31 Setup Menu pg 25 27 Step by Step Capture pg 27 T Transfer Rate C pg 20 Video pg 26 30 Video pg 60 63 Window Menu C pg 22 cSQ A9 VICTOR COMPANY OF JAPAN LIMITED Printed in Japan 0897MSV kUN KSN M COPYRIGHTO 1997 VICTOR COMPANY OF JAPAN LTD
5. select switch Y C CVBS a European models To video output jack 1 If your VCR has the 5 Connect to AV 21 pin AV input G jack equipped connector SCART TV or to VCR use the provided Connect Connect cable adapter to TV TV to TV JVC Video unit i Recording deck To remote pause jack Cable adapter provided only with 14m CONNECTIONS cont WHEN USING A RECORDING DECK WITH NEITHER A JLIP CONNECTOR NOR A REMOTE PAUSE JACK When using the JLIP Video Producer Software When using a recording deck with neither a JLIP connector nor a remote pause jack set your VCR brand using the RM V711U remote control unit then perform editing using the RM V711U Also refer to pg 59 to 62 of the camcorder s instruction manual For all connections except those to the digital connector and edit jack pg 12 and 13 Digital camcorder DIGITAL jack ES Video unit x Recording deck To EDIT jack PC connection mC cable provided Core filter Editing cable To COM port RS 232C To remote pause jack RM V711U Remote control unit Use the editing cable provided with the camcorder JLIP VIDEO CAPTURE SOFTWARE SECTION Operating Environment
6. 2 10 Video Capture Docking Station does not receive power from the battery pack installed the camcorder or from the AC Power Adapter Charger attached to the camcorder Be sure to connect the AA V90 AC Power Adapter Charger exclusively for the Video Capture Docking Station to the DC input jack located on the Video Capture Docking Station m When connecting the Docking Station to a recording deck with neither a JLIP connector a remote pause jack first make all connections except for the connection to the edit jack on pg 12 and 13 then make the connection to the edit jack on pg 14 To JLIP To JLIP jack Core Filter jack il To EDIT jack E Core Filter EDIT cable LOQO S Video VIDEO d output AUDIO OUT Adapter Core Core Core Charger ToDC Filter Filter Filter Make this output jack connection when the recording 3 5 mm vi AUDIO diameter Connect this if the celia VIDEO deck has 4 pole cable video unit has an cable no provided S Video input jack connector if the video Te unit has a JLIP AUDIO connector To S Video input input input jack gg jack L R To JLIP jack To S Video output jack Digital camcorder Docking Station JLIP Video Capture
7. Connectable Devices Installation rrr tero a Open amp Close Initialization How The Desktop Works Video Capture Save Picture Picture Format 1 Additional Operations Troubleshooting List of Error messages 15 16988 GETTING STARTED What is video capture software Video capture software is a type of application program that allows you to capture video images from camcorders and VCRs and store them in personal computers running under the Windows operating system These images can be transferred from the video source to the computer via a standard RS 232C communication interface By processing the captured images with commercially available image editing software you can create your own unique and highly personal illustrations and graphics for incorporation into everything from postcards to newsletters and Internet homepages What s more you can also use your computer to edit your original video recording and produce a fun to watch professional looking video pro gram What is JLIP JLIP stands for Join
8. if you close without saving all unsaved Sete Criss captured data will be deleted Open JLIP jlp File Save As JLIP File 7 Click Exit from File in the menu bar Save Image As Ctrl A program closes 2On INITIALIZATION INITIALIZING JLIP The first time you start the Video Capture software JLIP initialization is required This sets which of the computer s COM ports connector into which the RS 232C cable is plugged is connected to the JLIP Video Capture Docking Station The initialization window automatically appears the first time you start the software after installation Do not forget to carry out this JLIP initialization procedure The JLIP must be initialized again whenever you connect a new image source or other unit to the JLIP Video Capture Docking Station 7 Start the JLIP Video Capture software 2 The JLIP Initialization screen automatically appears 3 Select COM Port e COM1 through ports are available Check to see which COM port is connected to the JLIP Video Capture Docking Station and select it 4 select Transfer Rate e Normally select 38400 38400 may not be available on some computers When transmission errors take place during use switch to 19200 or 9600 Image data transmission will be slower at these speeds 5 Click OK Call up the JLIP Initialization window and check the connected units JLIP Initialization COM Port Tra
9. 01 P 00 05 00 12 00 06 04 16 mm 02 00 06 10 12 00 07 30 15 LB eg 03 00 07 33 10 00 08 45 15 04 00 08 51 05 00 10 13 12 X c BEE gt IN OUT w ELAPSED TIME 5 JLIP VIDEO PRODUCER File Edit Set up Window Help COUNTER 00 00 00 09F 06 FLE POWER PROGRAM PLAYBACK SCENE START CA 225 SCENE CUT IN CUT OUT 0 ad LE 0 0 00 05 00 00 06 04 16 set 02 98 00 06 10 12 00 07 30 15 03 Ej 00 07 33 10 00 08 45 15 04 88 00 08 51 05 00 10 13 12 ELAPSED TIME 00 04 58 19F mj j nj IN OUT Playing back one programmed scene SELECT SCENE Click on the line where the CUT IN OUT points you want to preview are displayed and that line will be highlighted START PLAYBACK Click SCENE camcorder searches the scene by going to a point prior to the CUT IN point and starts playback at the CUT IN point Playback stops after the CUT OUT point is passed NOTE When one programmed scene with a Fade Wipe Effect is played back the
10. MM JLIP VIDEO CAPTURE DOCKING STATION GV DS2 ENGLIS H NN Dear Customer Thank you for purchasing this VIDEO CAPTURE DOCKING STATION Before use please read the safety information and precautions contained in the following pages to ensure safe use of this product Using This Instruction Manual e All major sections and subsections are listed in the Table Of Contents F pg 5 7 Notes appear after most subsections Be sure to read these as well Basic and advanced features operation are separated for easier reference It is recommended that you m refer to Controls and Connectors pg 10 and familiarize yourself with connector locations before use 455 read thoroughly the Safety Precautions and Safety Instructions that follow They contain extremely important information regarding the safe use of your new VIDEO CAPTURE DOCKING STATION SAFETY PRECAUTIONS IMPORTANT Connection to the mains supply in the United Kingdom DO NOT cut off the mains plug from this equipment If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point then obtain an appropriate safety approved extension lead or consult your dealer BE SURE to replace the fuse only with an identical approved type as originally fitted and to replace the fuse cover If nontheless the mains plug is cut off ensure to remove the fuse and dispose of
11. CANCEL ACCESS NAME CHANGE RETURN TO VIDEO PRODUCER EN 65 Changing the device to use while connecting over two same type devices ACCESS DEVICE SELECTION DIALOG BOX Choose Device Change from Set up on the JLIP VIDEO PRODUCER window Device Selection dialog box appears SELECT DEVICE Click on the name of the device and It is impossible to use two same type devices simultaneously Select Devices to control VCR DISCONNECT 06 VCRCAMERA 1 07 VCRCAMERA 2 VIDEO PRINTER 660m ADVANCED OPERATIONS Adjusting the gap between the stored edit start point in the computer and the du bed one in the recording deck During dubbing the beginning of the scene stored in the computer can be missed or the scene prior to the transition you chose for the edit start point can be dubbed into the recording deck When these cases occur adjust the gap for more accurate editing CHECK EDIT START TIMING After dubbing pg 52 play back the dubbed scene 2 ACCESS RECORD TIME CORRECTION DIALOG BOX Choose Record Timing from Set up on the JLIP VIDEO PRODUCER window Record Time Correction dialog box appears 3 ENTER VALUE To adjust the edit start timing enter a new value from 0 00 sec to 2 60 sec When the scene prior to the transition you chose for edit start point is dubbed Enter a smaller value t
12. VIDEO CAPTURE CAPTURING VIDEO IMAGES There are three capture modes available Step by Step Program and Interval Image data flow Digital Video signal GV DS2 camcorder Image stored in video memory Full image data with a resolution of 768 x 552 pixels 4 Index image data 2 types of video data with a resolution Bitmap data of 80 x 60 pixels Approx 1 3MB e JPEG video compression data Approx 50 kB PC video data are stored on a hard disk or the like When storing full image data on a 2HD disk e An image saved in the bitmap data format can be stored on one disk e About 28 images saved in the JPEG video compression format can be stored on one disk This is the case when using floppy disks formatted for 1 44 MB NOTE index image is displayed in the image display box e Each time the image display box is double clicked the full image data 768 x 552 pixels is displayed only after full image data transfer is finished STEP BY STEP CAPTURE N27 Use the Step by Step Capture mode when you want to Capture a smaller number of images e Confirm the images being captured Ea Capture ESL by Step Image Format Device Change Preroll Initialize ID Change Counter Reset Automatic JLIP Video Capture File Edit Set up Window CAPTURE TRANSFER NOTES Index image Full image data are transferred to the image display boxes bordered in g
13. Open the menu bar and click Set up Capture Mode Automatic then select Program Capture in the Auto matic Transfer window and click OK Play the tape on the video source unit and click Edit Transfer the Index Image Index image data at the counter setting is captured Be sure to complete steps 1 through 7 If they are not all followed the index image and the full image will be different as the full image data will not have been changed in step 6 NOTE Note that if the index image data is saved in step 4 the hatching pattern indicating the change will no longer appear the next time it Click Edit Transfer the Full Image is called up Full image data at the counter setting is transferred COUNTER RESET You can change the counter setting on connected video source units VHS VHS C Since digital camcorders record the counter as a time code the counter on a digital camcorder cannot be reset Capture Mode Image Format Device Change VCR s counter is reset Preroll gt Initialize ID Change Counter Reset 1 Open the menu bar and click Set up Counter Reset 34m ADDITIONAL OPERATIONS DELETE INDEX IMAGE AND FULL IMAGE You can delete any captured picture Both index image 80 x 60 pixels and full image 768 x 552 pixels are deleted 1 Click the image display box you want to delete box is bordered in green 2
14. SCENE _CUTIN CUT OUT ea Br 1 01 44 00 05 00 12 00 06 04 16 F C 02 98 00 06 10 12 03 00 07 33 10 00 08 51 05 00 07 30 15 t 00 08 45 15 00101512 EW ELAPSED TIME 00 04 58 19 lt 1 D BASIC OPERATIONS cont Opening a file saved on floppy disk INSERT FLOPPY DISK INTO DRIVE SELECT DRIVE NUMBER Click W in DRIVE LOOK FOR FILE NAMES Open tape in the directry SELECT FILE NAME Follow steps 2 and 3 in Opening a saved file on the left FILE NAME DIRECTORY travel jip ce DRIVE v Europe Tour CANCEL Correcting and cutting the programmed counter data Correcting the program counter data DESIGNATE SCENE Double click on the scene you want to modify OR Click on the scene you want to modify and choose Modify from Edit Modify Edit Points dialog box appears gt pg 55 ENTER NEW DATA Click on the part to be corrected and input a new value there To correct the data click on OK Cutting the counter data being set up DESIGNATE SCENE Click on the scene you want to cut CUT SCENE Choose Cut from Edit message Scene No
15. 10 00 08 45 15 p s re 04 00 08 51 05 00 10 13 12 X ELAPSED TIME 00 04 58 19F 22 m j uj IN OUT 5 JLIP VIDEO PRODUCER c x File Edit Setup Window Help COUNTER CRT 0 PROGRAM PLAYBACK SCENE START 4 WF SCENE CUT IN CUT OUT mi Ep x 00 05 00 12 00 06 04 16 mm rr t 02 00 12 00 07 30 15 03 00 07 33 10 00 08 45 15 04 00 08 51 05 00 10 13 12 ELAPSED TIME 00 04 58 19F EA Exi m j uj r IN OUT NOTES P AE Effects and Fades Wipes not available when any player except the GR DVX series is used If you use Sepia or Monotone P AE Effects you cannot use the Dissolve or Black amp White Fader Selecting P AE Effect There are 5 P AE Effects available to spice up the programmed scene You can select only one effect per programmed scene DESIGNATE SCENE Click on the scene where you want to use a P AE Effect 2 SELECT P AE EFFECT Click the P AE Effect button depending on your choice The selected effect indication is displayed to the left of the CUT IN
16. 95 manual or your computer s manual for details on basic Windows 95 operating procedures Installation Procedure This software offers you the choise of viewing on screen messages in English or French Select the desired language during installa tion by performing the following steps To start the setup program Launch Windows 95 Close any other applications that are running Insert the JLIP Video Capture CD ROM into the CD ROM drive 3 Choose Run from Start on the taskbar 4 If you want English on screen messages If the Video Capture CD ROM is in Drive D type D JCPTE SETUP in the box to the right of Name If the disk is in Drive E type E JCPTE SETUP If you want French on screen messages If the JLIP Video Capture CD ROM is in Drive D type D JCPTF SETUP in the box to the right of Name If the disk is in Drive E type E JCPTF SETUP Click OK the setup program is running simply follow the instructions displayed on screen When setup is complete the JLIP Video Capture icon appears on the screen e JLIP VIDEO CAPTURE Setup was completed successfully appears 5 Click OK to complete installation en 7 WINDOWS 3 1 Refer to the Windows 3 1 manual of or your computer manual for details on basic Windows 3 1 operating procedures Installation Procedure This software offers you the choise of viewing on screen messages in English o
17. MAINTENANCE If the inside of the VIDEO CAPTURE DOCKING STATION is left dusty for a long time its use can lead to fire or malfunction Consult your JVC dealer on cleaning CAUTION Changes or modifications not approved by JVC could void user s authority to operate the equipment The Readme TXT file provides additional information for setup and information that is not included in the instruction manual Please read the file before installing the provided software program You can find the latest information in English on the provided software program at our www server lt www gt http www jvc victor co jp CONTENTS gt 8 MAJOR FEATURES CONTROLS AND CONNECTORS 10 CAMCORDER ATTACHMENT 11 CONNECTIONS 12 JLIP VIDEO CAPTURE SOFTWARE SECTION 15 GETTING STARTED 16 INSTALLATION JLIP Video Capture Software 17 OPEN amp CLOSE Basic Operation Procedure 18 Preparation 18 How to close the program 19 INITIALIZATION 20 Initializing JLIP gro tede Co 20 Select Ullls SS 21 HOW THE DESKTOP WORKS 22 Main desktop window 22 24 Each pulldown menu is configured as follows 24 VIDEO CAPTURE 26 Capturing vi
18. first select Close Serial from Set up on the menu bar To resume using the JLIP Video Producer Software click the JLIP button in the JLIP Video Capture Software and select Open from File on the JLIP Video Producer Software s menu bar Error This application will close Check devices Confirm that power is ON No devices detected to connect Power ON all devices in system Communication error number Check cable connection Select the device to control No video cassette Load a video cassette to IDO number Invalid entry in scene O number There is IN OUT condition Correct the time or delete the scene Select a number between 0 and 24 This device has been selected as the player Please select another device This device has been selected as the recorder Please select another device TROUBLESHOOTING POSSIBLE CAUSE CORRECTIVE ACTION The COM port used for the JLIP connector is not selected or the COM port is selected but the connection is wrong Check the connected COM port and select it on the Serial Port Selection screen gt pg 46 Power is not supplied or the connection is wrong ll Connect the devices correctly and turn them on gt pg 12 13 Device is not turned on or cable is disconnected Connect the device correctly and turn it on pg 12 13 If device was turned off and on again during operation clic
19. will be deleted appears To cut the scene click on Cutting all programmed scenes 1 CUT SCENE Choose All Clear from Edit The message OK to delete all programmed scenes appears To cut click on OK Copying a programmed scene and transferring it to an other position 7 DESIGNATE SCENE TO BE COPIED Click on the scene you want to copy 2 STORE DESIGNATED SCENE IN MEMORY Choose Copy from Edit 3 DESIGNATE POSITION Click on the scene number which is above the position to which the copied scene is to be transferred 4 TRANSFER COPIED SCENE Choose Paste from Edit NOTE It is not possible to paste a segment above scene 01 3 JLIP VIDEO PRODUCER ox File Set up Window Help Modify iD 06 FILE Cut DFF AllClear Del Copy g Paste Ctrl V 5 start SCENE CUT IN CUT OUT iex BF E 01 El j FeAl FA 00 08 51 05 ELAPSED TIME 00 04 58 19F mj nj j r IN OUT w Overwriting the file EN OO Transferring the programmed scene to an other position DESIGNATE SCENE TO BE TRAN
20. CUT IN point at the beginning of the tape or if you set CUT OUT point at the end of the tape editing may not function properly Change previously registered CUT IN OUT points slightly and try setting them again When connecting to a VHS C camcorder rewind the tape to its beginning and press COUNTER RESET on the camcorder I pg 67 The counters of DV format digital camcorders cannot be reset 3 JLIP VIDEO PRODUCER File Edit Set up Window Help COUNTER POWER Emm PROGRAM PLAYBACK SCENE START ie 5 CUT IN CUT OUT 00 06 04 16 sie 01 CA 00 05 00 12 02 92 00 06 10 12 03 00 07 33 10 EJ 00 08 51 05 ELAPSED TIME 00 07 30 15 00 04 58 19F lt IN OUT DEF Ons t 2 0 3 JLIP VIDEO PRODUCER File Edit Set up Window Help COUNTER CORR 10 a GPOWER 3 PROGRAM PLAYBACK SCENE START P FAM BF SCENE CUT IN CUT OUT ej Et
21. Level Interface Protocol a new communication protocol which allows AV units equipped with a JLIP terminal to be controlled by a personal computer BJ JLIP is a registered trademark of JVC Operating Environment Personal computer with Microsoft Windows 3 1 or Windows 95 CPU Intel DX4 or higher processor Minimum RAM requirement more than 8 MB Available Hard Disk space of at least 4 MB When JLIP Video Capture Software is also installed the minimum Hard Disk space required is 8 MB in total Colour display capable of at least 640 x 480 pixels 256 colours Recommended 1024 x 768 16 77 Mil colours 1 free serial transmission port compatible with 9600 bps transmission rate connectable to RS 232C with 9 pin serial connector Recommended compatible with UART 16550A Mouse Windows compatible CD ROM drive Note An optional 9 pin serial conversion adapter is required for computers using serial communication port other than standard 9 pin Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries Other product and company names included in this instruction manual are trademarks and or registered trademarks of their respective holders Devices to connect to the VIDEO CAPTURE DOCKING STATION e Player Digital camcorder GR DVX GR DV1 and GR DVM1 Attach a Docking Station equipped with a JLIP con
22. Open the menu bar and click Edit Delete This deletes the selected image data Then click Window Arrange Transfer the Index Image Index Transfer the Full Image This removes the deleted index image s Modify space and renumbers the remaining Delete index display box You can still run the program without re arranging the yy index Window Arrange Index VCR CHANGE ID You can change the Video Capture Unit s ID number Open the menu bar and click Set up Setup change Capture Mode gt ID Change window appears Image Format Device Change 2 Enter a new ID number Preroll Initialize Counter Reset This completes the ID number change 4 Open the menu bar and click Set up Initialize eThe JLIP Initialization window appears eStart JLIP initialization rx p 20 21 8 aso CREATE NEW FOLDER Creating a new folder directory is a good idea when capturing an image from another video tape 7 Open the menu bar and click File New Album Cirl N New Album Open Album Ctrl O image display area is refreshed Save Album Ctrl S elf the index image data on screen is not Open JLIP File saved you will be asked whether to Save JLIP jip File save or not Save Image As Exit OPEN INDEX File 7 Open the menu bar and click File New Album Ctrl N Open Album Open Album Save Album Ctr
23. The image data scanned by the video source unit is automatically transferred to your computer HOW STORE VIDEO PRODUCER SOFTWARE DATA Data from this unit can be converted to JLIP Video Producer software files If index image data is saved as a JLIP Video Producer software file the file can be printed with the optional GV PT2E Video Printer Refer to the instruction manual for details New Album Cirl N Open Album Ctrl O Save Album Ctrl S Open JLIP File Save As JLIP File Save Image As Exit Preparation Make sure all units are properly connected 12 Insert a video tape into the video source unit elf you want to store the data on a floppy disk load a data disk into the floppy disk drive create a directory and sub directory on the data disk p 54 1 Open the menu bar and click File Save As JLIP jlp File The Save As JLIP jlp File window is displayed 2 Enter the folder name directory and file name elf you want to store the data on a floppy disk enter the drive name 3 Click data converted to a JLIP Video Producer software file is stored on the floppy disk in the selected drive eJLIP Video Producer software files can be used for video program editing or printed with the video printer p 60 62 NOTE When stored data is opened with the JLIP Video Producer software the edit in
24. button Closes the Video Printer window VIDEO PRINTER OPERATION GV PT2 Printing Before printing perform the procedure listed below Connect to image and sound source pg 12 13 Set VCR to external input Set TV to VIDEO mode so that images from video printer appear 3 STORE SCENE Click STORE on the Video Printer window at the scene you want to print BRING UP VIDEO PRINTER WINDOW Select Video Printer from Window on the JLIP VIDEO PRODUCER window The Video Printer window appears view the buttons on the JLIP VIDEO PRODUCER window move the Video Printer window to the right and up keeping the title bar on the Video Printer window clicked 2 Click the JLIP VIDEO PRODUCER window Video Printer window appears behind the JLIP VIDEO PRODUCER window view the Video Printer window click the title bar labelled Video Printer selected scene is stored in memory and appears on the TV monitor PRINT Insert print paper into the video printer and click PRINT e Also refer to the video printer s instruction manual Strobe The following print styles are also available Printing the same scene 4 or 16 times on one sheet Multi Print Printing various scenes on the same print sheet Multi Print Printing a scene within a scene Inset Print Storing a selected number of im
25. completed successfully appears 5 Click OK to complete installation NOTE This instruction manual uses English on screen messages in its explanation 46 STARTING JLIP VIDEO PRODUCER SOFTWARE Starting JLIP Video Producer Software PREPARE DEVICE S Turn the device s on and set the camcorder s Power Dial to PLAY 2 ACCESS VIDEO PRODUCER JLIP VIDEO Double click the JLIP VIDEO PRODUCER PRODUCER icon and the Serial Port Selection dialog box appears 3 SELECT SERIAL PORT Select the port number of the connector you are using to connect the computer to the Video Capture Docking Station e f the connector number is A Serial Port Selection corresponds to 1 Select a Serial Port eClick OK COM 1 elf the connection is correct the Device O COM2 Selection dialog box appears error message No devices detected O 3 to connect ON all devices O COM 4 system appears when a wrong port number is selected OK CANCEL when the connection is wrong when the device s ID number is already in use when the device s power is not turned on Initializing JLIP Check the Serial Port selection too To return to step 1 check the connection and the device s power and try again Now checking devices ID When all serial COM ports are occupied by other applications the error message Error This application
26. error may occur in some models during video transfer In this case first unplug the AC Power Adapter Charger s power cord from the AC outlet then plug it back into the AC outlet and run the software again 405 LIST OF ERROR MESSAGES Appears when COM port is not Not connected to COM port set by JLIP Initialize available Check the COM port number and connector and retry JLIP initialization Connected device Connected devices are not turned on not found Selected COM port is not connected properly Make sure connection is proper and carry out JLIP initialization Then turn on this unit and the connected devices Error Transfer Video unit is brought to STOP or ends playback halted during automatic capture Check the auto capture setting Full image data 768 x 552 pixels cannot be captured if you start auto capture at the beginning of the tape Video capture stops if video playback is stopped Start video capture 20 seconds after the start of the recording Tape is too short to match the preset number of images or there is a section of non recorded tape W Click OK check the tape length and re enter the number of images to be captured Use a fully recorded tape Execute after Video unit is not in Play mode during Interval playing back the Capture VCR Click OK set the video unit to Play and click Transfer again Not enough disk Remainin
27. pg 33 Create New Folder 35 D Delete Index Image and Full Image pg 34 Desktop Window pg 22 48 58 Device Selection gt pg 21 DUBBING C pg 52 E Edit Menu 24 Exit 1056 etre C pg 19 F Field Pict re 32 File Men Js pg 24 Frame Picture gt 32 Full image data pg 23 H Help Menu pg 25 49 Index image pg 23 28 30 Index image data gt pg 23 Initialize pg 20 46 Input button pg 22 Install 17 45 Interval Capture pg 30 gt 39 3 JBEG esie eee eene pg 32 M Main Window eene C pg 22 Memory button eese C pg 22 Menu gt pg 22 48 Open JLIP jlp File pg 36 Open Index C pg 35 Operate VCR gt pg 25 49 Picture Format gt pg 32 Program gt 28 29 5 Save JLIP File
28. the Bitmap image format bmp the transfer takes a very long time causing the video source unit to stop playback automatically 2270 Click Window VCR to call up the VCR Operation window Operate the video source unit via the VCR Operation window 5 D 00 01 23 12 Click the Capture button on the desired video image and index image data 80 x 60 pixels is transferred to the computer message No 1 index image being transferred appears during data transmission p 7 Repeat steps 4 through 6 as necessary Click Transfer button elf you want to capture full image data 768 x 552 pixels after capturing the Index Image in step 2 select Index amp Full Image and click OK then click the Transfer button 1 The message Index No 1 being scanned appears while the video source unit is scanning the picture to be captured 2 The message No 1 index image being transferred appears When you select Index amp Full Image in step 2 the message No 1 image being transferred appears while the full image data is being transferred to the computer 3 The images captured in step 7 are scanned by the video source unit and automatically transferred to the computer 30m VIDEO CAPTURE cont INTERVAL CAPTURE The Interval Capture mode is best suited for Preparation capturing images at set intervals from a sure all units are proper
29. the camcorder s power is off 125 1 OPEN COVER Slide the Multi connector cover MULTI on the bottom of the camcorder in the direction of the arrow until you hear a click 2 ATTACH Attach the camcorder by aligning the mark on it with the one on the Video Capture Docking Station 3 FIX Slide the camcorder in the direction of the arrow 4 LOCK While holding the camcorder slide the LOCK lever in the direction of the arrow To remove the camcorder press the RELEASE button After the LOCK lever has been released detach the camcorder N LOCK lever NOTE If it is impossible to slide the lock gt RELEASE button lever repeat steps 2 and 3 Charging a battery Installed in the Camcorder If you attach the camcorder with a battery installed to the Video Capture Docking Station you can charge the battery First make sure that the camcorder does not have a DC cord connected to it before attaching Turn the camcorder s Charger Power Dial to OFF then perform the following steps indicator 1 Connect the Video Capture Docking Station to the AC Power Adapter Charger Video Capture Docking Station does not use the camcorder s battery to function Be sure to connect the AC Power Adapter Charger exclusively for use with the camcorder Core filter 2 Connect the power cord to an AC outlet Docking Station s charger indicator begins CHARGE blinking to indica
30. to use while connecting over two same type devices 65 Adjusting the gap between the stored edit start point in the computer and the dubbed one in the recording deck 66 reset i uto o ERO ERREUR EE ERE RE 67 When Using the Video Capture Software 67 TROUBLESHOOTING 68 MAJOR SPECIFICATIONS 70 INDEX 71 Make sure the GV DS2E optional includes the following accessories 3 5 diameter 4 pole cable x 2 CD ROM including two JLIP Video Capture software programs Docking Station JLIP Video Capture and JLIP GV DS2 Video Producer software PC Connection Cable for PC AT compatible computers 414 Sen MAJOR FEATURES Advanced Applications Create title indexes for your video collection Title index images can be captured from your favorite recordings in intervals of 30 minutes 1 hour 1 5 hours etc using the Interval Capture mode Print the captured index images on your PC printer using the compu ter s Print Screen facility then attach them to your cassettes Business presentations Images captured from video can be incorpo rated into business documents to spice up your presentations Internet homepage Images captured from video can be incorpo rated in your Internet homepage using image editing
31. will close Check devices Confirm that power is ON appears Free a serial COM port to start up JLIP Video Producer Software SELECT DEVICE S Select device to control VCR DISCONNECT OK 06 VCRCAMERA CANCEL VIDEO PRINTER DISCONNECT 3 JLIP VIDEO PRODUCER File Edit Window Help ees EUER ONAA ETE ety Name Change Recorder Select scene stant La een E we Counter Reset CUT OUT 84 Function Set p E Close Selial Initialize EI zy ELAPSED TIME 00 00 00 00F Ex Ex gt aj IN OUT N Recorder Selection Select devices to control VCR 06 VCRCAMERA 01 HR DD949E CANCEL e 4d 7 Click on the name of the device you wish to control Clicking OK brings up the JLIP VIDEO PRODUCER window elt is possible to select a second device of a different type simultaneously but it is impossible to select two same type devices simultaneously SELECT RECORDER Click Set up Recorder Select and the Recorder Selection dialog box appears Click on the name of the recorder you want to use and click OK When using a recording deck equipped with JLIP connector select the nam
32. your hearing DON T obstruct the ventilation of the equipment for example with curtains or soft furnishings Overheating will cause damage and shorten the life of the equipment DON T use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the manufacturer s approved stand or legs with the fixings provided according to the instructions DON T allow electrical equipment to be exposed to rain or moisture ABOVE ALL NEVER let anyone especially children push anything into holes slots or any other opening in the case this could result in a fatal electrical shock NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry DO NOT attempt to insert foreign objects into the connectors as this can lead to electric shock or fire If an object is accidentally inserted unplug it and contact your JVC dealer Be especially careful with children If during use you notice that the VIDEO CAPTURE DOCKING STATION is damaged unplug it and contact your JVC dealer Use of the VIDEO CAPTURE DOCKING STATION under these conditions can lead to fire or electric shock DO NOT attempt to repair or modify the VIDEO CAPTURE DOCKING STATION Doing so may result in malfunctions or injury If a problem occurs contact your JVC dealer CAUTIONS cont Failure to heed the following precautions may result in damage to the VIDEO CAPTURE DOCK
33. 4 Prepare for printing refer to the GV PT2 instruction manual Select desired layout using the remote control unit provided with the GV PT2 To Print Captured Video Data with Video Printer Captured video data can be automatically scanned and printed You can print OFF 4 or 16 images on one sheet Select Window Video Printer in the JLIP VIDEO PRODUCER window Video Printer window appears Select the number of scenes OFF 4 16 and select SAME or SELECTED for the content Select this by clicking the buttons A W 2062 Auto Capture Image has been captured by printer PRINT SCENE CANCEL Click the Title bar in the JLIP VIDEO PRODUCER window and activate the window Select Set up Function Set Auto Capture Click START captured video data set first is searched and stored in the video printer When the data has been stored the message Image has been captured by printer appears elf the number of scenes was set to OFF or 4 or 16 in step 2 and then to SAME you can start printing simply by clicking PRINT the number of scenes was set to 4 or 16 in step 2 and then to SELECTED click NEXT SCENE The next scene is automatically searched and stored in the video printer 6 Click PRINT to start printing NOTES To p
34. CTING A PICTURE FORMAT Under Image Format you can specify the full image data format and the capture mode 7 Open the menu bar and click Set up Capture Mode Image Format Image Format Device Change Image Preroll Format window ormat Initialize appears ID Change Counter Reset 3 Select capture mode e There two different settings avail able Frame Picture and Field Picture Refer to Capture Mode below for details 4 Click OK This completes picture format setting Select format This setting takes effect the next time There are two different settings avail you use the capture function able JPEG jpg and Bitmap bmp Refer to Picture Data Format below for details TRANSFER DATA Full image data can be captured and transferred in two different formats Picture Data Format JPEG jpg This is the default setting If you do not set Picture Format image data is captured this format JPEG Joint Photographic Expert Group is a leading standard defining the compression and decompression of still colour pictures The quantity of transferred data appears smaller because the images are compressed This results in a shorter transfer time Bitmap bmp Transfer time is longer when you use this format because there is no data compression The benefit is that picture quality is maintained with no deterioration B
35. E There are two types of automatic capture Program mode and Interval mode You can save time in either mode because once the initial settings have been stored or you have decided what pictures to capture the subsequent capture process is carried out automatically PROGRAM CAPTURE In the Program Capture mode select the images you want to capture and the JLIP Video Capture Docking Station will automatically capture and transfer the images to your computer Preparation Make sure all units are properly connected c p 12 Insert a tape into the video source unit Click Image Format in Set up and select Field Picture in the Capture Mode r3 p 32 Open the menu bar and click Set up 1 Capture Automatic CETTE Step by Step Automatic Transfer window Image Format appears Device Change PP Preroll Select data to be transferred Initialize 2 8 E ID Change When you select Index Image index Counter Reset image data 80 x 60 pixels is trans ferred to your computer When you select Index amp Full Image both the index image data 80 x 60 pixels and full image data 768 x 552 pixels are transferred to the computer 3 Select Program Capture and click Before transferring your images make sure that enough space is available on your hard disk For full image data space requirements I 26 When transferring full image data using
36. ING STATION 1 DO NOT place the VIDEO CAPTURE DOCKING STATION in an environment prone to extreme temperatures or humidity in direct sunlight in a dusty environment an environment where strong magnetic fields are generated a surface that is unstable or subject to vibration The unit may fall causing injury 2 DO NOT place heavy objects on the VIDEO CAPTURE DOCKING STATION 3 DO NOT place anything which might spill on top of the VIDEO CAPTURE DOCKING STATION 4 AVOID violent shocks to the VIDEO CAPTURE DOCKING STATION during transport 5 DO NOT leave the VIDEO CAPTURE DOCKING STATION plugged in when the unit is not in use 6 DO NOT use accessories other than those designated in the instructions Use of others can lead to fire or electric shock 7 DO NOT connect devices to the VIDEO CAPTURE DOCKING STATION other than those designated in the instructions Use of others can lead to malfunctions How to handle a CD ROM Take care not to soil or scratch the mirror surface opposite to the printed surface Do not write anything or put a sticker on either the front or back surface If the CD ROM gets dirty gently wipe it with a soft cloth outward from the centre hole using a circular motion Do not use conventional disc cleaners or cleaning spray Do not bend the CD ROM or touch its mirror surface Do not store your CD ROM in a dusty hot or humid environment Keep it away from direct sunlight
37. S 48 BASIC OPERATIONS 50 Operating 50 Setting in out points 50 Playing back one programmed scene 51 Playing back all programmed scenes 51 52 Saving the program list on hard disk 53 Opening saved file 54 Correcting and cutting the programmed counter date 54 Overwriting the file 55 Selecting a P AE Effect iiec rnt rl atte 56 Selecting Fade Wipe 56 VIDEO PRINTER WINDOW BUTTONS AND DISPLAYS 58 VIDEO PRINTER OPERATION GV PT2 60 Printing 60 Quitting the Video Printer window 61 Quitting the JLIP Video Producer window 61 IDEO rj e M 62 ADVANCED OPERATIONS 64 Changing ID number 64 Connecting other device during operation 64 Changing the name of the device 65 Changing the device
38. SFERRED Click on the scene you want to transfer and choose Cut from Edit message Scene No will be deleted appears To cut click on OK DESIGNATE POSITION Click on the scene number which is above the position to which the scene is to be transferred TRANSFER CUT SCENE Choose Paste from Edit Modify Edit Points Enter the new in and or out points POINT 00 12 10 OUT POINT 16 50 CANCEL Saving any previously saved program using the same name Overwrite erases the previously saved data for that file OVERWRITE FILE After opening a file and modifying counter data lt pg 54 choose Save from File on the JLIP VIDEO PRODUCER window and click on OK message This file already exists Do you want to overwrite it appears To overwrite the file click on OK 56an 0 BASIC OPERATIONS cont JLIP VIDEO PRODUCER c x File Edit Setup Window Help COUNTER O D TN ONJoFF PROGRAM PLAYBACK SCENE START SCcENE CUTIN CUT OUT ej as pj E 01 P 00 05 00 12 00 06 04 16 C 02 00 06 10 12 00 07 30 15 E 03 00
39. ages at short intervals and printing them on one sheet Also refer to the video printer s instruction manual 5 JLIP VIDEO PRODUCER x File Edit Set up Help COUNTER Control 10 FILE e Video Printer Los POWER ON OFF PROGRAM PLAYBACK SCENE sramr 4 rem SCENE ___ CUT IN CUT OUT Et x ELAPSED TIME 00 00 00 00F m j uj IN OUT Video Printer olx POSITION gt ETH HIGH LOW STORE 16 STROBE STROBE SPEED 4 SELECTED pRiNt OFF SAME ON OFF SELECT v PIXSTABILIZER SOURCE MULTI PIX CONTENT MEMORY Aperture Off CLOSE 2 6 Quitting the Video Printer window Quitting the JLIP VIDEO PRODUCER 1 CLICK CLOSE window Video Printer window closes D EXIT FROM FILE eThe JLIP VIDEO PRODUCER window closes 62 x VIDEO PRINTER OPERATION 2 cont Auto Capture Preparation Load the tape into the video unit Convert the captured data to JLIP Video Producer software data and store it r3 37 Select file name r p 5
40. and edit out points have the same counter value When you want to perform program editing change the counter number at the edit out point in the JLIP Video Producer software s Modify Edit Points SON TROUBLESHOOTING NOTE External noise or disturbance may interfere with the microprocessors built into the JLIP Video Capture Docking Station If this happens turn the power off and then turn it on again JLIP Video Capture Software does not work Operating the camcorder capturing video images through the computer etc is not possible No effect when clicking the Input Select Memory buttons The video unit does not operate when Window VCR in the menu bar and VCR in the VCR opera tion window are clicked The VCR operation window display shows a different operation from what the video unit is actually doing On screen display of video unit is not stored in memory Counter display appears in the image display box even when there is no tape in the video unit Does the JLIP Video Producer Software or the JLIP Movie Player Software run The JLIP Video Capture Software cannot run together with it if the camcorder is attached to the JLIP Video Capture Docking Station with the battery pack installed or with the AC Power Adapter Charger attached it is impossible to operate the camcorder using the computer These buttons do not function The counter display in th
41. as an Edit jack e If there are disturbances in the images at the CUT IN OUT points when using a recording deck with High Speed Turbo Search change the Preroll time setting from Standard to Long 220 JLIP VIDEO PRODUCER Edit Setup Window Help New IDE FILE Open Ctrl S Save As Ctrl A Exit BACK scene START 741 E ScENE CUTIN CUT OUT 184 58 01 4 00 05 00 12 00 06 04 16 ire 02 00 06 10 00 07 30 15 00 08 51 05 gui ELAPSED TIME 00 04 58 19F m uj IN OUT Save a program list FILE NAME DIRECTORY travel B 5 ilip DRIVE ae z MEMO Europe Tour CANCEL Saving the program list on hard disk It is possible to save all programmed scene information as a file in the computer START SAVING Select Save As from File on the JLIP VIDEO PRODUCER window The Save a program list dialog box appears ENTER FILE NAME Input a file name up to 8 characters in the FILE field extension is jlp ex travel jlp You can also input a comment up to 30 character
42. deo images 26 Step by step capture 27 Automatic capture 28 Program capture 28 Interval capture 30 SAVE PICTURE 31 Saving LT 31 Save the full image data 31 PICTURE FORMAT SETTING 32 Selecting a picture format 32 CONTENTS cont ADDITIONAL OPERATIONS 33 Counter value change 33 Counter reset scan rok E 33 Delete index image and full image 34 CONGO lD e rao d 34 Create new folder 35 Open HEX 1a oi ctp a5 JLIP VIDEO PRODUCER SOFTWARE 36 Using JLIP video producer software data 36 How to store JLIP video producer software data 37 TROUBLESHOOTING 38 LIST OF ERROR MESSAGES 40 JLIP VIDEO PRODUCER SOFTWARE SECTION 43 GETTING STARTED 44 INSTALLING JLIP Video Producer Software 45 STARTING JLIP VIDEO PRODUCER SOFTWARE 46 VIDEO PRODUCER WINDOW BUTTONS AND DISPLAY
43. ders and VCRs If you want to capture a still picture from a recorded tape load the tape into the video unit If you want to capture an image from the data stored in the JLIP Video Producer Software be sure to load the disk on which the image is stored Close any programs that are running You cannot run other programs simultaneously with the Video Capture software With Windows 3 1 open the group of application icons in the Program Manager and double click the application icon you want to launch With Windows 95 click the START button on the taskbar and the Program menu appears on the screen Move the mouse pointer over the program entry you want to run and click to start the program Now let s start the program If you re using Windows 3 1 open the JLIP Video Capture group in the Program Manager and double click the JLIP Video Capture icon If you re using Windows 95 select JLIP Video Capture from the Start menu and click to start v INITIALIZING JLIP page 20 PONENS GERE SELECT UNITS page 21 MAIN DESKTOP WINDOW page 22 MM 210 HOW TO CLOSE THE PROGRAM Double click the control menu button in Windows 3 1 or click Exit in the File F menu In Windows 95 simply click the Close button If you try to close the program with no image data saved the message The album has not New Album been saved Save appears Please note that Open Album
44. device on and off POSITION button Selects the position to store a scene in memory for Multi Print ID number Displays the selected device s ID number Message display Displays the operating mode of the selected device MULTI PIX button e Select by clicking A V button OFF Single print 4 4 shots on one sheet 16 16 shots on one sheet CONTENT button e Select by clicking A V button STROBE Stores the selected number of images at short intervals and prints them all on one sheet SELECTED Prints 4 or 16 selected scenes on one sheet SAME Prints the same scene 4 or 16 times on one sheet STROBE SPEED button Effective when STROBE is selected from CONTENT HIGH When printing in the Strobe Print mode the GV PT2 stores scenes at intervals of approximately 1 15 second LOW When printing in the Strobe Print mode scenes are stored at intervals of approximately 1 2 second PIX STABILIZER button If the scene you want to print is jittery select ON to stabilize it OFF Usually set to OFF STORE button Stores scenes and titles you want to print in the video printer s memory 10 PRINT button When connected to the GV PT2 Print command is available 11 SELECT scene select button Switches between SOURCE images from camcorder or VCR and MEMORY scenes stored in memory for display on TV monitor 12 CLOSE
45. dirt or abnormalities on the tape When there are audio video disturbances during playback or when the scene s counter acts abnormally delete the scene from the programmed playback or correct its CUT IN point gt pg 54 708 MAJOR SPECIFICATIONS JLIP VIDEO CAPTURE DOCKING STATION Power consumption 9 W when charging Connectors S Video Output Y 1 0 Vp p 75 ohms S2 output 0 3 Vp p 75 ohms Video Output 1 0 Vp p 75 ohms pin jack VIDEO output connector Audio Output 8 dB 1 kiloohm pin jack JLIP x 2 3 5 mm diameter 4 pole mini head jack compatible with RC 5325 plug Digital Mini DIN 8 pin Editing connector 3 5 mm diameter 2 pole DC output 5 V DC Captured image sizes 768 x 552 pixels 80 x 60 pixels Operating temperatures 5 to 30 C Operating humidity 35 to 80 Dimensions 101 5 W x 46 5 Hx 141 D mm Weight Approx 280 g Power supply 6 3 V DC when using the AC Power Adapter Charger AA V90 E amp O E Design and Specifications subject to change without notice INDEX A Arrange 2 22 pg 34 Automatic Capture AUTO pg 28 30 B gt 26 32 Capture Mode 32 Charige ID gt pg 34 64 COM nieder gt pg 20 46 Counter reset eee gt pg 33 Counter Value
46. e VCR operation window turns blue 5 your video unit compatible with JLIP Only JLIP compatible units can be operated If you are using a JLIP compatible unit and it still won t work check to make sure that it is correctly connected Is the video unit selected in Select Unit Select correctly Initialize JLIP Make sure the video unit is turned on N Slow Play in the VCR operation window automatically switches to Play after approximately 10 to 20 seconds some cases the video unit may continue slow motion playback even when the VCR operation window changes from Slow Play to Play Check your video unit s instruction manual for details It is not possible to capture the on screen display date time cord etc into the computer When capture video data from a powered on camcorder with no tape loaded a counter display may appear in the image display box Images corresponding to the displayed counter number can no longer be caputred N Problem Cause Pg There may be a slight difference between the counter of the video image that you want to capture and the Index image data Full image data captured in the computer This is not a malfunction Counter cannot be reset Counter reset is not available with digital 33 camcorders Cannot capture video data with the desired counter number Program capture suddenly stops After finishing video capture the video
47. e and ID number of your recording deck When using a recording deck not equipped with a JLIP connector but a remote pause jack or when using a non JVC recording deck select USE EDIT JACK in the Recorder Selection dialog box elt is impossible to select a recording deck already designated as a player to be recorder IDEO PRODUCER WINDOW BUTTONS AND DISPLAYS 1 POWER button Control menu box 4 ID number Menu bar Title bar 2 COUNTER system 5 FILE name 3 Tape counter display Icon button File Edit Set up Window Help COUNTER 00 00 00 09F ID PROGRAM PLAYBACK SCENE START SCENE CUT IN CUT OUT BF 01 4 00 05 00 12 00 06 04 16 0 14 Fade Wipe 02 9 00 06 10 12 00 07 30 15 Wip 03 00 07 33 10 00 08 45 15 Effect buttons 04 J 00 08 51 05 00 10 13 12 EA ELAPSED TIME 00 04 58 19F 1 r jo 8 SCENE button 15 Message display 11 Camcorder s operation buttons 12 IN OUT point button 10 ELAPSED TIME 13 P AE Effect buttons 7 IN OUT point display 9 START button 449 1 POWER button Turns the device on and off f power is not supplied to the camcorder beforehand you can not turn t
48. electrical equipment care must be taken if you are to obtain the best results and safety is to be assured DO read the operating instructions before you attempt to use the equipment DO ensure that all electrical connections including the mains plug extension leads and interconnec tions between pieces of equipment are properly made and in accordance with the manufacturer s instructions Switch off and withdraw the mains plug when making or changing connections DO consult your dealer if you are ever in doubt about the installation operation or safety of your equipment DO be careful with glass panels or doors on equipment DON T continue to operate the equipment if you are in any doubt about it working normally or if it is damanged in any way switch off withdraw the mains plug and consult your dealer DON T remove any fixed cover as this may expose dangerous voltages DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode Switch off using the switch on the equipment and make sure that your family knows how to do this Special arrangements may need to be made for infirm or handicapped people DON T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety It is illegal to watch television whilst driving DON T listen to headphones at high volume as such use can permanently damage
49. es of consecutive snapshots CLASSIC FILM Gives recorded scenes a strobe effect WINDOW WIPE The scene starts in the centre of a black screen and wipes in toward the corners or comes in from the corners gradually wiping out to the centre MONOTONE Like classic black and white films your footage is shot in B W Used together with the Wide Cinema function it enhances the classic film effect SLIDE WIPE Wipe in from right to left or wipe out from left to right EFFECT CLEAR Cancels the selected P AE Effect Fade Wipe Effect buttons DOOR WIPE Wipe in as the two halves of a black screen open to the left and right revealing the scene or wipe out and the black screen reappears from left and right to cover the scene DISSOLVE The new scene gradually appears as the old one gradually disappears SCROLL WIPE The scene wipes in from the bottom to the top of a black screen or wipes out from top to bottom leaving a black screen CORNER WIPE The new scene wipes in over the previous one from the upper right corner to the lower left corner WINDOW WIPE The next scene gradually wipes in from the centre of the screen toward the corners covering the previous scene SLIDE WIPE The next scene gradually wipes in over the previous one from right to left SHUTTER WIPE Wipe in toward the centre of a black screen fr
50. file remains in the JCPT folder where the program run file is contained JLIP initialization not possible With Video capture Transfer done in Automatic Transfer mode the captured image looks like two pictures laid one upon another The index image is not size of its image display box When you start program capture at the beginning of the tape the video unit stops playback ending program capture Start video capture about 20 seconds after the point where the recording begins If you want to erase the file because of limited hard disk space start the program once then close it The video remaining in the JCPT folder will be cleared Make sure that the IRQ Interrupt ReQuest is not being used by another device COM port selection is wrong Confirm the COM port number and execute JLIP initialization again In this case video capture is not possible using the Frame Picture setting Change the setting to Field Picture and try video capture again Change the system font size of the computer 28 32 The monitor displays of the application software illustrated in this manual may differ from those you are actually viewing depending on the operating environment of your computer Operation will be significantly slower when used in an environment other than that recom mended page 16 While basic VCR operations such as playback and fast forward are available a transmis sion
51. ftware Video Capture Software data can be exported to the Video Producer Software Assemble Editing Selected scenes on a pre recorded tape can be edited in a specified sequence Pre recorded tape on camcorder Zi NO Recording tape on VCR 10 CONTROLS AND CONNECTORS PLAY button STOP button PAUSE button Rewind REW button EDIT button Fast Forward FF button JLIP jack F p 13 Joint Level Interface Protocol LOCK lever Connect to a JLIP compatible comcorder or VCR to control it from the computer RELEASE button DIGITAL jack p 13 14 Connect to the computer s RS 232C terminal COM port Multi connector p 11 The Docking Station can be connected Charger Indicator CHARGE p 11 with the GR DVX through this connector Never touch it with your hand or hit it with a hard object if the pins are damaged the connectors will become unusable due to contact failure Remote control sensor Receives the remote control signals for the attached Camcorder S Video output jack 2 OUT p 13 Outputs S Video signal Also compatible with S 51 52 connectors EA MS CZ EDIT jack DC IN jack F p 13 p 13 14 VIDEO OUT jack p 13 AUDIO OUT jack R p 13 DC OUT jack For dealer use AUDIO OUT jack p 13 CAMCORDER ATTACHMENT wll Before attachment make sure
52. g disk space is under 1 MB space is available Click check disk space and select a drive with space available with Save Image As Communication If operation stops after this message appears turn error the Capture Docking Station off and then on again Images stored in memory will be lost ll Do not use any other application while JLIP Video Capture and JLIP Video Producer are running as it may interfere with communication Do not click and move the mouse during data transfer f your computer s energy saver battery voltage indication or screen saver is engaged the image data transmission may be interrupted Disengage these functions Refer to your computer s instructions manual on details Check the capture If operation stops after this message appears turn device the Capture Docking Station off and then on again Images stored in memory will be lost 42 a3 JLIP VIDEO PRODUCER SOFTWARE SECTION The Readme TXT file provides additional information for setup and information that is not included in the instruction manual Please read the file before installing the provided software program You can find the latest information in English on the provided software program at our www server lt www gt http www jvc victor co jp 4455 GETTING STARTED What is JLIP JLIP stands for Joint
53. han 1 30 When the beginning of the scene stored in the computer is missed Enter a larger value than 1 30 Factory preset is 1 30 sec JLIP VIDEO PRODUCER File Edit Window Help COUN D Change ID Device Change POW Change Recorder Select PROGHIZEZERLISEEM SCENE START Preroll 5 Counter Reset CUT OUT Function Set BF 01 Close Selial 00 06 04 16 02 4 Initialize 00 07 30 15 03 00 07 33 10 00 08 45 15 00 08 51 05 00 10 13 12 M ELAPSED TIME 00 04 58 19 m j nj j DETERMINE VALUE Click OK This value is stored in the computer CHECK EDIT START TIMING AGAIN To check the corrected edit start timing dub the stored scenes and play them back NOTE Even if the edit start timing is adjusted there can be a slight margin between the adjusted edit start point and the dubbed scenes one Record Time Correction Type in the value from 0 00 sec to 2 60 sec to adjust pause time during editing Pre start time 1 30 sec OK cancet
54. he camcorder on and off by clicking this button Some camcorders cannot be turned on and off by clicking this button 2 COUNTER system 3 Tape counter display Displays actual tape position ex 00 01 45 10F Hours Minutes Seconds Frames 4 ID number Displays the selected device s ID number 5 FILE name Displays file name after saving the program under a new name ex travel 6 MEMO f you wish to add some comment to the file you can input it ex Europe Tour 7 IN OUT point display You can set up to 99 in out points per file 8 SCENE button Plays back only one programmed scene so that you can preview it Operates only the camcorder 9 START button Starts editing Scenes are recorded in scene s numerical order After starting editing this button changes to STOP button 10 ELAPSED TIME Displays the total elapsed time of all the programmed scenes 11 Camcorder s operation buttons Operate the camcorder Stop button 4 REW REW Search button gt Play button FF FF Search button IJ Pause button Reverse Slow button gt Forward Slow button then the Reverse Forward Slow button Functions your camcorder does not have cannot be performed by the above buttons Click Window VCR Control on menubar to call up the VCR Control window You can control the video source unit from this window 12 IN OUT point button Reg
55. ile j Opens JLIP Video Producer software file or JLIP Movie Player Save As JLIP jip File software file F p 36 Save Image As Converts to and saves as a JLIP Video Producer software file or Exit JLIP Movie Player software file I 37 Saves the image data file to another folder or drive gt p 31 Closes the program I 19 index image of the image data in the Video Capture Docking Station memory is transferred to your computer and displayed in the selected image box in the Step by Step capture mode The video source unit scans the selected counter value and transfers the index image to your computer in the automatic capture mode 33 Transfer the Index Image Transfer the Full Image Modify Delete A full image of the image data in the Video Capture Docking Station memory is transferred to your computer in the Step by Step capture mode The video source unit scans the selected counter value and transfers the full image data 768 x 552 pixels to your computer in the automatic capture mode 33 Changes the scan timing in the automatic capture mode by changing the counter preset I p 33 Deletes the index image 34 8 25 Two different modes available Step by Step Capture and Automatic Capture p 27 28 30 Selects image data format to be used in the transfer and capture
56. isters the cut in and out points of the scene you want to dub 13 P AE Effect buttons Set one of the 5 P AE Effects per programmed scene To cancel the selected effect press the EC Effect Clear button 14 Fade Wipe Effect buttons Set one of the 7 Picture Wipes and 10 Fades Wipes per scene transition To cancel the selected effect press the TC Transition Clear button 15 Message display Displays the connected device mode etc To exit from the VIDEO PRODUCER window choose Exit from File NOTE If you need the JLIP VIDEO PRODUCER HELP window choose Contents from Help 50m Operating camcorder PREPARE CAMCORDER Set the camcorder s Power Dial to PLAY and insert a recorded tape into the camcorder PLAYBACK ON TV MONITOR Click P Playback picture appears on the TV monitor To confirm other operations click other buttons 3 BASIC OPERATIONS Setting in out points PLAYBACK ON TV MONITOR Click gt Playback picture appears the TV monitor 2 SET CUT IN OUT POINTS Select Function Set from Set up in the Jlip Video Producer window and select Edit Tape To set CUT IN OUT points click IN OUT button at the beginning and end of the scene you want to dub e Set CUT IN OUT points so that the CUT OUT point s value is larger than the CUT IN point s scene with no CUT OUT point will disable program playback and dubbing elf you set
57. itmap is a data format representing characters and graphics with combinations of pixels Full image data resolution is 768 x 552 pixels with 16 77 million colours 24 bit colour Index image data resolution is 80 x 60 pixels with 16 77 million colours 24 bit colour Capture Mode Frame Picture This is the default setting If you do not set Picture Format images are captured in this mode Since a frame consists of two overlapping 1 50 sec images one 1 25 sec image forms a field it is unstable when capturing fast moving motion pictures e Field Picture While a field contains only half the data of a frame meaning that vertical resolution is half that of a frame images captured from a fast moving motion picture are more stable than when captured with Frame Picture ADDITIONAL OPERATIONS 3 3 COUNTER VALUE CHANGE If you want to replace a captured image with a different one you can capture the new one by changing the counter value Click the image display box of the index number you want to change box is bordered in green Open the menu bar and click Edit Modify Modify Capture Point window appears 2 Enter a new counter value Transfer the Index Image Transfer the Full Image Click OK The index image is surrounded by a hatching pattern indicating that a change is being made The counter value is changed to the value you just entered Delete
58. k OK All devices should function properly The line where the name of the device to use appears is not clicked Click on it and OK gt pg 47 The video cassette is not loaded in the camcorder When the video cassette is removed during operation this message appears insert the video cassette into the camcorder The value of the CUT OUT point is smaller than the CUT IN point s Set the value of the CUT OUT point so that it is larger than the CUT IN point s I pg 50 When correcting the CUT IN OUT points the value you set differs from the original by over 25 frames Select integral number from to 24 pg 54 You selected a device already designated as a player to be the recorder Select another device capable of playback gt pg 47 You selected a device already designated as a recorder to be the player Select another device capable of recording F pg 47 The monitor displays of the application software illustrated in this manual may differ from those you are actually viewing depending on the operating environment of your computer Memory full 99 events maximum Enter correct value Your selection is not valid Set a value from 0 to 59 Picture Wipe Dissolve functions and Black amp White Fader can not activate while Sepia or Monotone is used This effect can not activate on the in point of scene No 01 PROBLEM Dubbing d
59. l S Open JLIP File Save As JLIP jlp File Save Image As Exit Open Album window appears 2 Select the name of the folder directory 3 Click OK 3 6 8 VIDEO PRODUCER SOFTWARE USING JLIP VIDEO PRODUCER SOFTWARE DATA The Video Capture Docking Station can capture JLIP Video Producer software data at an edit in point corresponding to a preset counter number Preparation Make sure all units are properly connected c p 12 Insert the tape program edited with the Video Producer Software into the video source unit elf the data is stored on a floppy disk load disk into the floppy disk drive New Album Cirl N Open Album Ctrl O Save Album Cirl S Open JLIP jip File Save As JLIP File Save Image As Exit Open the menu bar and click File Open JLIP jlp File Open JLIP File window is displayed 1 Double click the name of the desired folder directory in the Select Directory box elf the data is stored on a floppy disk enter the drive name 3 Click on the file name to select it Click OK computer monitor displays Scene No counter number at Edit in Point and a blank image box Open the menu bar and click Set up Capture Mode Automatic 5 Select the data you want to transfer and Program Capture and click OK 6 Click the TRANSFER button
60. ly connected camcorder p 12 Insert a tape into the video source unit Click Image Format in Set up and select Field Picture in the Capture Mode p 32 Ex Step by Step Image Format Device Change Preroll gt Initialize ID Change Counter Reset 00 01 23 12F nen Em E NOTE Make sure that enough hard disk space is available on your computer before executing video transfer For full image data space requirements p 26 Transfer of index image data full image data starts at the image box bordered in green Click and select the desired image box When transferring full image data using the Bitmap image format 6 the transfer takes a very long time causing the video source unit to stop playback automatically Open the menu bar and click Set up Capture Mode Automatic The Automatic Transfer window appears Select the data to be transferred When you select Index Image index image data 80 x 60 pixels is transferred to your computer When you select Index amp Full Image both index image data 80 x 60 pixels and full image data 768 x 552 pixels are transferred to the computer Select Interval Capture Set the interval Select the time interval at which pictures are captured Set the number of pictures to be captured and click OK From 1 up to 99 Click Window VCR to call up the VCR Operatio
61. mage and Index numbers are Full image data will appear if it automatically assigned has already been transferred Image display box Counter display Colours of counter numerals Hatched like this Indicates the current tape position Black Full image data transferred when counter eg 00 02 17 21 White Full image data not time is corrected Hour Min Sec Frame transferred only index p 33 image data transferred When an image display box is double clicked Full image data will appear if it has already been transferred Gil Displays the full image Index No 02 220 HOW THE DESKTOP WORKS MENU BAR All program functions can be selected from the menus in the menu bar Click any item in the menu bar to open the corresponding pulldown menu Then click the desired command in the pulldown menu Some menu entries are invalid depending on the program status Invalid commands appear lighter than valid commands JLIP Video Capture Li Edit Setup Window Help New Album Ctrl N Open Album MEMORY Save Album Ctrl S Open JLIP jlp File Save As JLIP jip File Save Image As Ctrl A Exit Each pulldown menv is configured as follows Erases the image currently on screen and creates a new image New Album Open Album ibn LO Opens an index file 35 Save Album Ct S Stores the index image on screen F 31 Open JLIP jip F
62. mode 32 To initialize a connected unit or to change a connected unit I p 21 Capture Mode Image Format Device Change Preroll Adjusts the Preroll time of the playback VCR When Auto Capture is Initialize performed with no Preroll time selected Preroll is automatically set to ID Change Standard If there are disturbances in the captured image when Auto Counter Reset Capture is tried using a VCR with High Speed Turbo Search select Long instead gt p 52 Initialize when changing a COM port or transfer rate CF p 20 Changes the Video Capture unit s ID number gt p 34 Resets the VCR s counter I gt p 33 Arrange Index Deletes space when an index image has been deleted 34 VCR The VCR operation window appears to allow the computer to operate the VCR v VCR POWER button Counter display Se 00 01 23 12F Reverse Slow button be il Capture button pnm ll NL Transfer REW REW Search button PLAY button Forward Slow button VCR operation window FF FF Search button 73 Transfer button STOP button PAUSE button Contents Display Help menu About JLIP Video Capture Display version information of this software NOTE Counter reset If you use a DV format digital camcorder counter information is represented by the time code written on the tape Counter reset is not possible 2
63. n Window Start video playback a few seconds prior to the point where you want image capturing to start 7 Operate the video source unit via the VCR Operation window and click the Transfer button at the desired picture 1 The message No 1 index image being transferred appears while the index image data is being transferred to the computer When you select Index amp Full Image in step 2 the message No 1 image being transferred appears while the full image data is being transferred to the computer The message Index No 2 being scanned appears while the video data are fast forwarded and played at the time intervals set in step 4 to scan the video data on the VCR The image selected when Transfer is clicked is captured and subsequent images are captured at the time interval specified by the counter value selected in step 4 The video source unit enters the Pause mode when capture is complete SAVE PICTURE EG 1 SAVING Select when storing the contents displayed in the image display area page 23 Alb 7 Open the menu bar and click File New um rl Save Album Save Album Ctrl S Save Album window appears Open JLIP File Save As JLIP File Save Image As Ctrl A Exit 2 Type the folder name and title You can save without entering any title Click OK The file is saved
64. nector to the GR DV1 or GR DVM1 Recorder Recording deck equipped with a JLIP connector Recording deck equipped with a remote pause jack Recording deck equipped with neither a JLIP connector nor a remote pause jack Video printer Video printer equipped with a JLIP connector GV PT2 The JLIP Video Producer Software can be used with the GV CB1 or GV DS1 As of August 1997 INSTALLING JLIP Video Producer Software WINDOWS 95 Refer to the Windows 95 manual or your computer s manual for details on basic Windows 95 operating procedures Installation Procedure This software offers you the choise of viewing on screen messages in English or French Select the desired language during installa tion by performing the following steps To start the setup program Launch Windows 95 Close any other applications that are running Insert the JLIP VIDEO PRODUCER CD ROM into the CD ROM drive Choose Run from the Start on the taskbar 4 If you want English on screen messages If the JLIP VIDEO PRODUCER CD ROM is in Drive D type D NVDPROENSETUP in the box to the right of Name If the disk is in Drive E type E VDPROE SETUP If you want French on screen messages If the JLIP VIDEO PRODUCER CD ROM is in Drive D type D NVDPROFNSETUP in the box to the right of Name If the disk is in Drive E type E VDPROF SETUP Click the setup program is ru
65. nning simply follow the instructions displayed on screen When setup is complete the JLIP VIDEO PRODUCER icon appears on the screen e JLIP VIDEO PRODUCER Setup was completed successfully appears 5 Click OK to complete installation EN 45 WINDOWS 3 1 Refer to the Windows 3 1 manual of or your computer manual for details on basic Windows 3 1 operating procedures Installation Procedure This software offers you the choise of viewing on screen messages in English or French Select the desired language during installa tion by performing the following steps To start the setup program Launch Windows 3 1 Close any other applications that are running Insert the JLIP VIDEO PRODUCER CD ROM into the CD ROM drive Choose Run from File in the Program Manager 4 If you want English on screen messages If the JLIP VIDEO PRODUCER CD ROM is in Drive D type D NVDPROENSETUP in the box to the right of Name If the disk is in Drive E type ENVDPROENSETUP If you want French on screen messages If the JLIP VIDEO PRODUCER CD ROM is in Drive D type D NVDPROFNSETUP in the box to the right of Name If the disk is in Drive E type ENVDPROFNSETUP Click OK the setup program is running simply follow the instructions displayed on screen When setup is complete the JLIP VIDEO PRODUCER icon appears on the screen e JLIP VIDEO PRODUCER Setup was
66. nsfer Rate 38400 4 NOTE If you want to change a unit or COM port or Transfer Rate select Initialize from Set up in the menu bar to call up the JLIP Initialization window Repeat this setting procedure If a connection is incorrect a connected unit is not turned on or the connection ID numbers overlap the message Connection error appears Click OK to return to the Main desktop MM 2 SELECT UNITS 6 call up the Device Selection window 7 Click the name of the unit required word appears in the VCR box to indicate the Video source unit is now in use word MODULE appears in the Video Capture box to indicate the Video Capture Docking Station is now in use Only VCR and one Video Capture device can be selected 8 Click main desktop window returns setting complete VCR Not connected OK 06 VCRCAMERA cance Video Capture Not connected 83 MODULE NOTE The Device Selection window automatically appears when JLIP initialization is complete However if you want to select equipment whose JLIP initialization has already been carried out select Device Change from Set up the menu bar to call up the Device Selection window 22 HOW THE DESKTOP WORKS MAIN DESKTOP WINDOW 1 2 Control buttons Video Capture Untitled Folder Untitled Close butt
67. oes not go as programmed or the programmed playback displays an image similar to a Fader effect black fader mosaic fader etc EN 69 POSSIBLE CAUSE CORRECTIVE ACTION You tried programming over 99 scenes in file W First save the file currently opened then begin programming scenes using a new file I pg 53 You entered an incorrect device ID number Enter an ID number between 0 and 99 which is being used by another device I pg 64 The value of the CUT OUT point is smaller than the CUT IN point s Set the value of the CUT OUT point so that it is larger than the CUT IN point s F pg 54 You entered a value over 60 Enter a value from to 59 t pg 54 55 It is impossible to execute certain combination of P AE Effects and Picture Wipes Dissolve Cancel one of them or try another combination F pg 56 You tried to use a Picture Wipe Dissolve button with a P at scene 01 Use a Picture Wipe button without a at scene I pg 57 POSSIBLE CAUSE CORRECTIVE ACTION If the CUT IN point is programmed at the beginning of a tape and programmed playback is to be continued the video device stops and programmed playback is aborted Program the CUT IN point so that the tape is forwarded played back for approx 20 to 30 sec from the beginning of the first recorded scene on the tape I pg 50 The counter may not be recognized due to
68. om the top and bottom or wipe out from the centre toward the top and bottom leaving a black screen Fade Wipe Effect buttons WF WHITE FADER Fade in or out with a white screen DOOR WIPE The previous scene wipes out from the centre to the right and left like a door being pushed open to reveal the next scene BLACK amp WHITE FADER Fade in to a colour screen from a black and white screen or fade out from colour to black and white SCROLL WIPE The new scene wipes in over the last one from the bottom of the screen to the top MOSAIC FADER Fade in or out with a full screen mosaic effect SHUTTER WIPE The new scene wipes in over the previous one from the centre toward the top and bottom of the screen TRANSITION CLEAR Cancels the selected fade wipe effect 58 2 POSITION button 7 STROBE SPEED button Title bar 1 POWER button Icon button 3 1D number 9 STORE button STROBE 1 0 2 10 PRINT button SELECTED v MULTI PIX SOURCE MEMORY scene select 11 SELECT button 12 CLOSE button 8 PIX STABILIZER button 6 CONTENT button 5 MULTI PIX button 4 Message display 1 POWER button Turns the
69. on CAPTURE TRANSFER MEMORY INPUT 3 Image display area 1 Menu Displays function menus See the next page for detailed information 2 Control buttons CAPTURE button page 27 Press to CAPTURE a desired image from an image source When pressed an index image appears under this button e TRANSFER button t pages 29 through 30 The TRANSFER button is used to start Automatic Transfer Automatic Transfer is divided into Program Capture and Interval Capture e MEMORY INPUT buttons These buttons do not function JLIP button rx pages 43 through 69 The JLIP Video Capture software and JLIP Video Producer software cannot run simultane ously When you want to run the JLIP Video Producer software press this button to call up a cross bar and run the software To resume using the JLIP Video Capture software first select Close Serial from Set up on the JLIP Video Producer Software s menu bar then press the JLIP button 29 3 Image display area Each time you press the Capture button an index image is captured into the image area Up to 99 images can be captured with up to five images in one horizontal frame Index images are provided to allow you to confirm that you have captured the images you want Index image data 80 x 60 pixels Full image data 768 x 552 pixels Index image Click to select an index image and the border of the Image display box turns green Double click an index i
70. owing appears Connecting other device during operation e Do not enter ID number 0 because JLIP 3 ENTER NEW ID NUMBER Video Producer software does not recognize ID 0 ID Change Select the device to change VCR ID Change 06 Enter number between 1 and 99 ID 06 VIDEO PRINTER CANCEL Connecting other device during operation When connecting an other device during operation or changing ID numbers initializing is necessary to confirm the connected devices Not necessary to run JLIP Video Producer software from beginning again INITIALIZE Choose Initialize from Set up on the JLIP VIDEO PRODUCER window Changing the name of the device DIALOG BOX Choose Name Change from Set up on the JLIP VIDEO PRODUCER window Name Change dialog box appears SELECT DEVICE Click on the name of the device and CHANGE dialog box to enter new name of the device appears 3 ENTER NEW SET NEW NAME Click OK message Device name will be changed appears Clicking OK again sets that device name and brings up the Name Change dialog box WINDOW Click CLOSE Name Change Select the device to change VCR CHANGE VIDEO PRINTER Ems Name Change Enter new name up to 20 letters 06 1
71. point To cancel the selected P AE Effect Click on the scene which has the effect you want to cancel then click the EC Effect Clear button Selecting a Fade Wipe Effect There are 17 Fades Wipes available to be used for scene transitions 1 DESIGNATE SCENE TRANSITION POINT Click on the scene where you want to use a Fade Wipe 2 SELECT FADE WIPE EFFECT Click the Fade Wipe Effect button depending on your choice The selected effect indication is dis played to the right of the CUT OUT point Fade Wipe is executed between the selected scene the one clicked and the following one To execute a Fade Wipe Effect at the CUT IN point of scene 01 Click on the blank line above scene 01 and select the effect you want To cancel the selected Fade Wipe Effect Click on the scene which has the effect you want to cancel then click the TC Transition Clear button P AE Effect buttons Fade Wipe Effect buttons SEPIA Recorded scenes have a brownish tint like old photos Combine this with the Cinema mode for a classic look BLACK FADER Fade in or out with a black screen VIDEO ECHO Adds a ghost to the subject giving your recording a fantasy feeling CORNER WIPE Wipe in on a black screen from the upper right to the lower left corner or wipe out from lower left to upper right leaving a black screen STROBE Your recording looks like a seri
72. r French Select the desired language during installa tion by performing the following steps To start the setup program Launch Windows 3 1 Close any other applications that are running Insert the JLIP Video Capture CD ROM into the CD ROM drive Choose Run from File in the Program Manager 4 If you want English on screen messages If the Vid o Capture CD ROM is in Drive D type D JCPTE SETUP in the box to the right of Name If the disk is in Drive E type E JCPTE SETUP If you want French on screen messages If the JLIP Video Capture CD ROM is in Drive D type D JCPTF SETUP in the box to the right of Name If the disk is in Drive E type E JCPTF SETUP Click OK Once the setup program is running simply follow the instructions displayed on screen When setup is complete the JLIP Video Capture icon appears on the screen e JLIP VIDEO CAPTURE Setup was completed successfully appears 5 Click OK to complete installation NOTE This instruction manual uses English on screen messages in its explanation 9 OPEN amp CLOSE Basic Operation Procedure The Video Capture software can be started up in the same way as any other program running under Windows The procedure differs slightly depending on whether you re using Windows 3 1 or Windows 95 Preparation Turn on your computer Turn on the video source units such as camcor
73. reen Click and select the desired box es When transferring full image data using the Bitmap image format k bmp the transfer takes a very long time causing the video source unit to stop playback automatically Preparation Make sure all units are properly connected p 12 Click Image Format in Set up and select the desired format p 32 1 3 5 6 Open the menu bar and click Set up Capture Mode Step by Step Step by Step Mode is entered Click CAPTURE on the image you want to capture Click Window to have the VCR scan the picture in the VCR Operate window p 25 When you press the CAPTURE button full image data 768 x 552 pixels is captured into the Video Capture Docking Station memory Index image data 80 x 60 pixels is simultaneously transferred to the computer Index image data is transferred to the computer message No 1 index image being transferred appears during data transfer The message Transfer the full image Yes No appears Click Yes Full image data 768 x 552 pixels is transferred to the computer You cannot use the TRANSFER button in Step by Step Transfer mode The full image data is transferred to the computer message No 1 image being transferred appears during data transfer Repeat steps 2 through 5 as required 29 VIDEO CAPTURE cont AUTOMATIC CAPTUR
74. rint only the cut in scene on the edited tape Perform editing refer to pages 50 through 52 Q Print follow steps 1 through 5 above Select Auto Capture in step 4 e Click START in step 5 The cut in point of Scene No 1 is automatically searched and stored in the video printer You cannot start storing from Scene No 2 or subsequent scenes e Even if the video unit is in Stop mode clicking START automatically starts playback to search the cut in point of Scene No 1 f you want to print a particular scene only click SCENE in step 5 ADVANCED OPERATIONS Changing ID number The device s ID number is preset at factory as follows ex Camcorder 06 or 07 Video printer 20 When connecting more than two same type devices the same ID numbers will exist and a malfunction can occur To avoid a malfunction change the ID numbers It is recommended to change the ID number of an already connected device before connect ing the same type device ACCESS ID CHANGE DIALOG 4 SET ID NUMBER BOX Click OK Choose ID Change from Set up on the message device ID will be JLIP VIDEO PRODUCER window changed ID Change dialog box appears Clicking OK again sets that ID number and brings up the JLIP VIDEO SELECT DEVICE PRODUCER window Click on the name of the device and CHANGE NOTES dialog box to enter new ID number After step 4 perform the foll
75. s in the MEMO field SAVE FILE Click OK and the file will be saved on the hard disk which is in use NOTE The programmed scene information that is saved includes only the counter reading at the IN OUT point the Fade Wipe Effect and the P AE Effect The image is not be saved Saving the program list on a floppy disk Prepare floppy disk by creating a directory named JLIP and subdirectory named tape beforehand SELECT FLOPPY DISK DRIVE Click in DRIVE OPEN SUBDIRECTORY Click tape in the DIRECTORY SAVE FILE Click OK NOTE If the JLIP VIDEO PRODUCER window is closed before saving the file the file will not be saved So save the file before closing the JLIP VIDEO PRODUCER window if you wish to keep it 54 Opening a saved file LOOK FOR FILE NAMES Click Open from File on the JLIP VIDEO PRODUCER window Open a program list dialog box appears SELECT FILE NAME Saved file names appear in the FILE field Click on the file name you want and it appears in the field above DETERMINE FILE NAME Click OK and the file will be read JLIP VIDEO PRODUCER window returns JLIP VIDEO PRODUCER Edit Set up Window Help New iD FILE Open 0 Save 5 OFF Save As Ctrl A Exit BACK SCENE 4 BF
76. scene is played back but its Fade Wipe Effect is not executed Playing back all programmed scenes 7 START PLAYBACK Click START camcorder plays back scenes in numerical order and stops immediately after the last scene s CUT OUT point Only the camcorder moves NOTES During playback of programmed scenes do no operation other than pressing STOP If other operations are done a malfunction may occur e If SCENE or START is clicked at the end of tape the camcorder will not function properly e If the source tape has a blank portion scenes will not be edited properly If connected to a recording deck equipped with a JLIP connector make sure a tape is not loaded in the recording deck when you click START 528m BASIC OPERATIONS cont JLIP VIDEO PRODUCER File Edit Setup Window Help COUNTER 1D POWER PROGRAM PLAYBACK scene 741 rex iBE WE SCENE CUT IN CUT OUT BF Lj Lj 0 00 05 00 00 06 04 16 IE 02 98 00 06 10 12 00 07 30 15 03 00 07 33 10 00 08 45 15 04 00 08 51 05 00 10 13 12 E ELAPSED TIME 00 04 58 10F ER E m j nj j r IN OUT I
77. software Video journal and postcards Create your own original postcards party invitation cards and the like or keep a video journal Two software programs are provided en O JLIP Video Capture Software pg 12 41 JLIP Video Capture Software This is the software described in this manual Video Capture Facility Video images from video source units such as camcorders or VCRs can be captured as 768 x 552 still images with 16 77 million colors through the serial port RS 232C of a Windows operated computer JLIP Control Facility With a JLIP compatible camcorder or VCR all basic video operations can be executed via the computer display Up to 99 images can be captured automatically with Program Video Capture playing tape scanning transferring to PC Data d With JLIP Video Producer Software Data can be imported from the JLIP Video Producer Software Data from the Video Capture Software can also be exported to the Video Producer Software for Program Playback or Assemble Editing JLIP Video Producer Software pg 12 43 69 JLIP Control Facility With a JLIP compatible camcorder VCR or video printer GV PT2 all basic video operations can be executed on the computer display allows programmed video playback up to 99 programs or assemble editing print command can be issued to the GV PT2 video printer Data Sharing with the Video Capture So
78. t Level Interface Protocol a new communication protocol which allows AV units equipped with a JLIP terminal to be controlled by a personal computer BJ JLIP is a registered trademark of JVC Operating Environment Personal computer with Microsoft Windows 3 1 or Windows 95 CPU Intel DX4 or higher processor Minimum RAM requirement more than 8 MB Available Hard Disk space of at least 8 MB Colour display capable of at least 640 x 480 pixels 256 colours Recommended 1024 x 768 16 77 Mil colours 1 free serial transmission port compatible with 9600 bps transmission rate connectable to RS 232C with 9 pin serial connector Recommended compatible with UART 16550A Mouse Windows compatible CD ROM drive Note An optional 9 pin serial conversion adapter is required for computers using serial communication port other than standard 9 pin Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries Other product and company names included in this instruction manual are trademarks and or registered trademarks of their respective holders Connectable Devices When using JLIP with Video units equipped with a JLIP connector GR DVX series The JLIP Video Capture Software can be used with the GV CB1 and GV DS1 INSTALLATION JLIP Video Capture Software WINDOWS 95 Refer to the Windows
79. te that the charge has begun When it stops blinking and lights steadily the charge is complete It takes approx 2 hours to charge the battery fully 12m CONNECTIONS m To assure safety make sure all units are turned off before making any connections m The video images will be displayed on the LCD screen of the attached GR DVX series camcorder You cannot view the images on the computer screen m When connecting the cables provided with this Video Capture Docking Station or with the camcorder be sure to connect the terminals equipped with Core filters to the Video Capture Docking Station m When using the Video Capture Docking Station use the AA V90 AC Adapter Charger optional or provided with the camcorder To COM port To DIGITAL RS 232C jack 8 pin m PC connection cable Core Filter provided gt To S Video input connector gt To video audio input jack TTT 3 5 mm diameter 4 pole cable provided Camcorder equipped with a JLIP connector When connected with the camcorder 1 Connect this if JLIP the video unit 1 has S Video input connector a E S Video input connector S Video cable To video input connector Video cable When connected with the Video Printer
80. the plug immediately to avoid a possible shock hazard by inadvertent connection to the mains supply If this product is not supplied fitted with a mains plug then follow the instructions given below DO NOT make any connection to the Larger Terminal coded E or Green The wires in the mains lead are coloured in accordance with the following code Blue Neutral or Black p Brown to L Live or Red If these colours do not correspond with the terminal identifications of your plug connect as follows Blue wire to terminal coded N Neutral or coloured black Brown wire to terminal coded L Live or coloured Red If in doubt consult a competent electrician WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CAUTION To prevent shock do not open the cabinet No user serviceable parts inside Refer servicing to qualified personnel NOTE The rating plate serial number plate and safety caution are on the bottom of the VIDEO CAPTURE DOCKING STATION This unit is produced to comply with Standard IEC Publ 65 When using the Video Capture Docking Station use the AA V90EG or AA V90EK AC Adapter Charger optional or provided with the camcorder CAUTIONS SOME DO S DON TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but like any

Download Pdf Manuals

image

Related Search

Related Contents

Manual PDF  BlueAnt (S3 Owner's Manual      取扱説明書 (PDF形式、 471KB)  BDW-879N WS  Manuel d`installation  2198-UM001A-EN-P Kinetix 5500 Servo Drives User Manual  Einhell TH-US 240 - Stand-Bandschleifer  www.bullard.com AX/UST Series Helmets User Manual  

Copyright © All rights reserved.
Failed to retrieve file