Johnson Hardware IN11385D User's Manual
Contents
1. ROOM SIDE MOUNT REAR DOOR FIRST by tilting door back and resting hangers on rear rail DOOR GUIDE is located by moving both doors to jamb on one side positioning guide between doors as shown and fast ning to floor If floor is carpeted use Johnson 2136 CARPET RISER JAMB IN1138SD L E JOHNSON PRODUCTS INC 2100 STERLING AVE ELKHART IN 46516 USA 574 293 5664 Rev 9 052. ohnson INSTRUCTION UpTOSOLBS HARDWARE Series 1138 www johnsonhardware com SLIDING DOOR HARDWARE FINISHED OPENING WIDTHS ACCESSORIES AVAILABLE NOT FURNISED IN FROM INSIDE TO INSIDE OF FINISHED DOOR JAMBS HARDWARE SET 2 DOOR 2155 Stop MULTIPLY DOOR WIDTH BY 2 SUBTRACT 1 Limits Door Travel 2155 OPT drii PULL 2135 GUIDE PULL 2136 CARPET RISER A firm base for door guide when carpeting is used through opening Note 3 DOOR Use only on MULTIPLY DOOR WIDTH BY 3 SUBTRACT 2 solid doors All pulls are available L 2165 STOP in three finishes j gt 40 PULL PULL 2135 2135 PULL 30 PULL 2 1 8 Dia 4 DOOR MULTIPLY DOOR WIDTH BY 4 SUBTRACT 2 165 STOPS HEADER FOR 1 3 8 DOORS Mount track as shown in diagram at right Fasten hangers on back side of rear door and drill doors for pulls 36 from bottom of door 1 1 4 Min 1 9 16 Max Headroom NOTE To obtain full adjustment possibilities screws must be located at TOP of each slot as shown in Fig 1 Raise all hangers to top adjustment as shown in Fig 2 when installing doors Finished opening is door height plus 1 3 4 or if exetng opening door height is 1 3 4 less than opening E E gij Carpet Riser is used door must be 5 8 shorter MOUNT FRONT DOOR same way by tilting back and placing hangers on front rail 2135 GUIDE 2136 FINISHED FLOOR WITH CARPET WHEN 2136 CARPET RISER IS USED DOORS MUST BE 5 8 SHORTER
Download Pdf Manuals
Related Search