Jensen CD-36 User's Manual
Contents
1. Selecting fine audio equipment such as the unit you ve just purchased is only JENSEN the start of your musical enjoyment Now it s time to consider how you can 1 maximize the fun and excitement your equipment offers This manufacturer and Q U O the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion MODEL CD 36 and most importantly without affecting your sensitive hearing Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound So what sounds normal can actually be loud and PERSONAL CD PLAYER harmful to your hearing Guard against this by setting your equipment at a safe level BEFORE your hearing adapts INSTRUCTION MANUAL To establish a safe level e Start your volume control at a low setting e Slowly increase the sound until you can hear it comfortably and clearly and without distortion Once you have established a comfortable sound level e Set the dial and leave it there Taking a minute to do this now will help to prevent hearing damage or loss in the future After all we want you listening for a lifetime JENSEN We Want You Listening For a Lifetime Used wisely your new sound equipment will provide a lifetime of fun and enjoyment Since hearing damage from loud noise is often undetectable u2. TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the following chart or call 1 800 777 5331 for Customer Service Disc may be inserted upside down Disc not mounted correctly on chuck Dirty or defective disc Dirty pick up lens Player lid not closed Moisture Condensation allow player to warm up to room temperature for 60 minutes AC power to adaptor switched off Weak batteries Auto switch off has occurred Player fails to function Headphone plug is not firmly inserted into the Phones socket No sound from Headphones Dirty or defective disc Dirty pick up lens Player is subject to excessive vibration or shock Low battery power Poor Headphone connection SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service When returning the unit please remove batteries to prevent damage to the unit in transit and or from possible battery leakage We are not responsible for batteries returned with the product or for the cost of replacement Intermittent sound Distributed by SPECTRA Merchandising International Inc Chicago Industry Tech Park 4230 North Normandy Avenue Chicago IL 60634 U S A Please have model number ready for Customer Service call 1 800 777 5331 Printed in China EN 11
3. once PROG No 01 appears PROG and Track No 00 start flashing in the display 2 Press ke or gt P to select the desired track Gloi 3 When the desired track is displayed press the PROG button to register The PROG No changes to 02 Track No returns to 00 and flashes together with PROG 4 Repeat steps 2 and 3 to program more tracks Up to 20 tracks can be programmed into the memory 5 Press pul to start the programmed play 6 To erase the program in STOP mode simply press the pours button EN 9 PLAYER MAINTENANCE Cleaning the Cabinet Wipe with a soft cloth If the cabinet is very dirty dampen the cloth with a weak solution of neutral detergent and water and then wipe clean Cleaning the Lens A dirty lens will cause sound skipping and if the lens is very dirty the CD may not work Never touch the lens with your finger or press down on the lens assembly Damage may occur or you may scratch the lens Open the disc cover and clean the lens as follows Dust or Dry Particles Using a camera lens brush blower blow on the lens a couple of times wipe it lightly with the brush to remove dust Then blow on the lens once more DISC CLEANING AND TROUBLESHOOTING GUIDE Cleaning the Disc When a disc becomes dirty clean it with a cleaning cloth Wipe the disc from the centre out Do not use solvents such as benzene petrol thinner commercially available cleaners or anti static spray intended for analogue discs EN 10
4. HEN USING THE HEADPHONES PROLONGED USE AT HIGH LEVELS MAY IMPAIR YOUR HEARING Do not use earphones while operating a motorized vehicle as it may create a traffic hazard and is illegal in many areas BASIC OPERATION NOTE This unit can also play 3 inch 8cm single CDs without an adaptor Do not use a CD single adaptor for these smaller discs 1 Press the CD LID OPEN button to release the CD lid 2 Insert a disc with the label side facing up 3 Close the CD Lid A click will be heard when it locks into place 4 Press the PLAY PAUSE Pll button once to start playing 5 The display will show the total number of tracks and playing time The player will then start playing the first track 6 Adjust the volume by turning the Volume Control Locating a Particular Track To skip back to the beginning of the current or a previous track To skip to the beginning of following tracks Press 4 once or repeatedly Press Pl once or repeatedly Locating a Particular Point in a Track To search back at a high speed Press amp hold Kd To search forward at a high speed Press amp hold PP EN 6 Turning Power On and Off To turn ON and OFF press the following buttons after a disc is inserted into the player To turn ON Press PLAY PAUSE P4f button playback starts To turn OFF Press STOP button once for standby mode Press STOP W button again to turn off the power Auto power off function When the unit is stoppe
5. d Standby mode for approximately 30 seconds the power is automatically turned off To Remove the Disc 1 Press the CD LID OPEN button to open the CD compartment lid 2 Hold the edge and genily press the center pivot as illustrated then pick up the disc CAUTION WAIT FOR THE DISC TO STOP SPINNING BEFORE SLIDING THE OPEN SWITCH AND OPENING THE LID LCD DISPLAY INFORMATION When the Pt button is pressed at initial start up e The display will show and then the total number of tracks and total playing time The disc will start playing and the display will show the first track number and instant playing time e To review the total number of tracks and total playing time of the disc press the STOP button once During PLAY mode e The track number and instant playing time are displayed During PAUSE mode e When the track playback is paused the playing time flashes Battery Low Indicator A flashing battery indicator d flashes in the display when the batteries need to be changed EN 7 VARIOUS PLAYBACK MODES NORNAL PLAYBACK The whole disc is played and the player will stop after the last track is finished Every time the MODE button is pressed the corresponding mode appears in the display window in the following sequence REPEAT 1 In stop or playback mode press the MODE Button once fa When shown on the LCD display the current track on the q Glosar disc will be repeated REPEAT ALL In stop
6. dio technician for help WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment IMPORTANT NOTE This product does not contain a separate Power On Off switch After inserting a disc and installing batteries AC adaptor simply press the Play button to switch on and play a disc In order to maximize battery life and provide optimum playing time this product incorporates an Auto Power Off function The power to the player will automatically switch off approximately 30 seconds after a disc has finished playing or when the CD lid is opened EN 3 a o m NM p mM B 11 12 13 Previous Button LOCATION OF CONTROLS LCD Display DC Power Jack Battery Compartment Cover bottom Play Pause Button Volume Control CD LID Button JENSEN NPM OMPACT USE ogra AOD Headphones Jack Stop Button Next Button Mode Button Program Button CD Door EN 4 POWER SOURCE This CD player operates on two 1 5V DC AA size UM 3 alkaline batteries not included or with an AC adaptor with an output of 4 5VDC 700mA not included To install batteries into the player 1 Open the battery compartment cover located on bottom of cabinet 2 Insert two 1 5V DC AA size UM 3 alkaline batteries not included into the Battery Compartment following the polarity markings as indicated in the c
7. m the unit Remove all batteries from the battery compartment and unplug the AC adaptor from the wall outlet Make it a practice to remove the AC adaptor by grasping the main body and not by pulling the cord This unit employs a laser The use of controls or adjustment or performance of procedures other than those specified herein may result in exposure to hazardous radiation EN 2 COMPLIANCE WITH FCC REGULATIONS This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced ra
8. ntil it is too late this manufacturer and the Electronic Industries Association s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise Customer s Record The serial number of this product is found on its bottom cover You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss Please read this Instruction Manual carefully before Model Number CD 36 using the unit and retain it for future reference Serial Number EN 1 1 WARNING CLASS 1 LASER PRODUCT CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 This product contains a low power laser device SAFETY PRECAUTIONS As the laser beam used in this compact disc player is harmful to the eyes do not attempt to disassemble the casing Stop operation immediately if any liquid or solid object should fall into the cabinet Unplug the unit and have it checked by qualified personnel Do not touch the lens or poke at it If you do you may damage the lens and the player may not operate properly Do not put anything in the safety slot If you do the laser diode will be ON when the lid is still opened If the unit is not to be used for a long period of time make sure that all power sources are disconnected fro
9. ompartment 3 Close the battery door and completely slide it back to its Original position Battery care i Be sure that the batteries are installed correctly Wrong polarity may damage the unit ii a Do not mix old and new batteries b Do not mix alkaline standard carbon zinc or rechargeable nickel cadmium batteries iii If the unit is not to be used for an extended period of time remove the batteries Old or leaking batteries can cause damage to the unit and may void the warranty iv Never attempt to charge Non rechargeable batteries v Do not dispose of batteries in fire batteries may explode or leak Using an adaptor not included to power the player 1 Before connecting the adaptor to the player make sure that the AC voltage of the adaptor corresponds to your local AC outlet voltage The polarity of the adaptor must match to the polarity markings next to the DC jack on the player 2 Plug the 4 5VDC 700mA AC DC adaptor into an AC outlet 3 Insert the DC plug into the jack on the player NOTE When the adaptor is connected the batteries will be automatically disconnected and the player will now operate on the adaptors power Once the adaptor is unplugged the player will automatically switch to back to battery power EN 5 EARPHONES CONNECTION Connect the plug of the stereo earbuds included into the PHONES socket CAUTION e AVOID EXCESSIVE VOLUME LEVELS FOR LONG PERIODS OF TIME W
10. or playback mode press the MODE Button twice Sma ony When shown in the LCD display all tracks on the disc will be Y 09 47 repeated To cancel the Repeat Function press the MODE Button repeatedly until D 1 or CD ALL disappears INTRODUCTARY SCAN To play the first 10 seconds of each track on the disc pe an 1 In STOP mode press the MODE button three times INTRO INTRO is displayed o Oloo 2 Press button to start INTRO play from track number 01 If INTRO mode is selected during play INTRO will start flashing in the display Press pei to start INTRO play from next track Press e lt to start INTRO play from current track To cancel INTRO play press pas again Playback continues on current track eee Ww EN 8 Press pas button INTRO stops flashing and INTRO play starts from track 01 RANDOM Enables all the tracks on the disc to be played in a Random sequence 1 In STOP mode press the MODE button four times RANDOM Indicator RND will be displayed 0100 47 2 Press pas button A track is selected at random and playback begins 3 If RANDOM mode is selected during play RND will appear and flash in the LCD Display 4 Press 4 or met button once RND stops flashing and RANDOM playback begins 5 Press the MODE Button again to return to normal play mode PROGRAMMED PLAY Programs can be set in either the STOP or normal play mode 1 Press the PROG button
Download Pdf Manuals
Related Search