Ives 7245F User's Manual
Contents
1. QZ Installation Instructions 7244F and 7245F 1 1 2 Intermediate Pivot Door leaf 9 O Z 0 Right hand 3 installation shown 9 o left hand opposite Frame lt lt Y leaf 4 Right hand Pivot pin height Left hand installation adjuster installation Pivot lt cap 5 32 Allen i wrench 1 Prepare and mortise hinge stile of door and hinge side jamb to receive pivot set Determine pivot location using dimensions on reverse side The pivots are handed and must match hand of door To determine hand of door and proper pivot position see diagrams above Install top and bottom pivot sets before installing intermediate pivot 2 Locate drill and tap 1 4 20 mounting holes for metal door or metal frame Locate and drill pilot holes for 14 wood screws for wood door or wood frame Then hang door 3 Open door about 90 Install pivot leafs with 1 4 20 x 3 4 FHMS or 14 FHWS screws provided 4 The door weight should be balanced between bottom and intermediate pivots Refer to diagram above To adjust intermediate pivot A Use 5 32 Allen wrench to remove pivot cap from frame leaf B Insert Allen wrench into pivot pin height adjuster C Turn clockwise until pivot pin makes contact with steel ball inside door leaf D Adjust carefully to balance the weight of the door 5 Re install pivot cap CAUTION Improper pivot set installation can lead to personal injury2. or property damage Follow all instructions carefully For questions contact Technical Support at 1 888 371 7331 LEX Ingersoll Rand 26366 Rev 3 2006 Ingersoll Rand Company Limited Security Technologies It is very important for installer to verify that center line of intermediate pivot point lines up with center line of top and bottom pivot points before final installation Both door and frame pivot leafs located from face of door Intermediate pivot should be evenly spaced between top and bottom pivots Heel edge of door must be beveled 1 8 in 2 Frame Leaf Door Leaf 1 1 16 t 27 mm 916 Reference line 14 mm i ek Xo Face of door Ea 6 a 7 11mm 10mm lt lt 1 1 2 38 mm 1 1 2 ARS Bie Samm 8 mm Face Karen of door m SSe teres TY 8mm L Right hand installation shown left hand opposite 26366 00 26366 Rev 3
Download Pdf Manuals
Related Search