Invacare 1090768 User's Manual
Contents
1. handle lock and or the EXISTING roll pin are present 2 If EXISTING handle lock and or EXISTING roll pin is present remove by tapping out the roll pin using a center punch otherwise proceed to STEP 3 3 Slide EXISTING spring on to the narrow end of the EXISTING coil pin If necessary 4 Insertthe EXISTING coil pin and spring into the bush ing arm lock as shown in FIGURE 1 5 The NEW handle lock is placed on to the EXISTING coil pin and bushing arm lock 6 Ensure hole in the EXISTING coil pin is aligned with holes in the NEW handle lock insert tubular rivet through NEW handle lock and EXISTING coil pin as in FIGURE 1 DETAIL A NOTE If unable to insert tubular rivet due to frame interfer ence or otherwise push the existing coil pin so that the nar row end of the existing coll pin is visible at the other end of the bushing arm lock and can be rotated to allow the tubu lar rivet to be inserted through both the new handle lock and the existing coil pin constant pressure will be needed on the coil pin to insert in this manner 7 Head end of tubular rivet is butted against a hard flat surface and lightly tap the end of the center punch into the hollowed end of the tubular rivet causing it to spread DETAIL B When installing the tubular rivet ensure the hollow end is evenly spread and secures the handle lock DO NOT use excessive fore when installing the tubular rivet otherwise the handle lock may not f2. HANDLE LOCK ASSEMBLY REPLACEMENT KIT KIT NO 1090768 Assembly Installation and Operating Instructions SAVE THESE INSTRUCTIONS NOTE Check all parts for shipping damage before us ing Incase of damage DO NOT use Contact the Dealer Carrier for further instructions SAFETY SUMMARY The following recommendations are made for the safe installation of the Lock Handle Assembly Kit Kit No 1090768 This kit is used where Roll Pin Part No 1079151 is used with Right Hand Lock Handle Part No 1068937 and Left Hand Lock Handle Part No 1068938 GENERAL WARNING DO NOT assemble or use this kit without first reading and understanding this in struction sheet If you are unable to un derstand the Wamings Cautions or Instruc tions in this Instruction Sheet contact a healthcare professional dealer or tech nical personnel before attempting to in stall this kit otherwise injury or damage may occur INSTALLATION WARNINGS After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tghtened securely otherwise injury or damage may occur This kit contains the following DESCRIPTION QTY Handle Lock Right Hand 1 Handle Lock Left Hand 1 Tubular Rivet 2 NOTE These quantities are per kit NOTE Refer to the GENERAL WARNINGS in the SAFETY SUMMARY of this Instruction Sheet Installing Handle Lock Assembly Figure 1 1 Locate bushing arm lock and determine if EXISTING
3. unction propery NOTE it is recommended that STEP 7 be performed on a work bench or similar structure If the head end of the tubular rivet can not be butted against a hard flat surface due to frame interference or otherwise use a Solid object piece of metal tool handle ect that fits the space be tween the head end of tubular rivet and the frame interfer ence or otherwise to hold rivet in place 8 Repeat steps 1 7 on remaining bushing handle lock Tubular Rivet Spring Handle Lock Bushing Arm Lock re Narrow End Coil Pin ___ Tubular Rivet Head End a Hollowed End p Handle Lock DETAIL B Tubular Rivet HollowedEnd Center Punch Head End tt i Handle Lock Hollowed End After Installation NOTE After rivet installation ensure that the lock Tubular Rivet handle operates freely Handle Lock FIGURE 1 INSTALLING THE HANDLE LOCK INVACARE CORPORATION ONE INVACARE WAY ELYRIA OH 44035 Customer Service 800 333 6900 Technical Support 800 832 4707 Form No 99 186 Part No 1092333 Rev A 1 8 99 Printed in USA
Download Pdf Manuals
Related Search