innovative technology IT-5022 User's Manual
Contents
1. OPERATING INSTRUCTIONS CONTINUED LISTENING TO THE RADIO NOTE To prevent any interference between your iPod and the radio in this unit your iPod should be switched Off when listening to the radio Set the POWER button to the On position the display lighting turns on Set the FUNCTION button to the Radio position The display will change from time to radio frequency Set the BAND selector to the desired band AM or FM Auto Rotate the TUNING control until the display shows the desired AM or FM station frequency Turn the TUNING control clockwise to select higher numbered frequencies or counter clockwise to select lower numbered frequencies The FM STEREO indicator will light when you tune to an FM Stereo station Rotate the VOLUME control to increase or decrease the volume level If you want to increase the bass response set the DBBS button to the On positon Note If you are listening to music that contains heavy bass at high volume levels the sound may become distorted if the DBBS switch is set to the On position If this occurs setthe DBBS switch to the Off E position or reduce the volume level When you are finished listening set the POWER button to the Off M position The display changes from radio frequency to correct time and the display lighting goes off OPERATING INSTRUCTIONS2. CONTINUED Docking and Charging The iPod This system is designed with the same 30 pin connector found in all iPod docks By simply connecting the iPod to the docking station on the front panel of this system you can play the iPod through the speakers of this system And you can also recharge the battery in the iPod Note Recharging is only possible when you are using the system with the included AC adapter The iPod battery will not be recharged when you are operating this system on battery power To accommodate all models of dockable iPod we have included four different adapter inserts to ensure that the iPod will fit properly in the docking station Refer to the chart below to select the proper adapter insert for your particular model of dockable iPod Note If you have a earlier non dockable iPod or an iPod Shuffle please refer to the next section to connect you device to the Auxiliary Input jack iPod inserts Your unit comes with 2 removable inserts to ensure the iPod fits properly in the dock on the front of the system IPod version 30 40 60 GB GB GB GB 1 Place the proper adaptor insert into the docking station The iPod 30 pin connector should fit through the opening in the bottom of the insert Gently press the insert into the dock until it is properly seated With the iPod in the Power Off mode carefully place it into the insert Note Remove
3. Do not break batteries open internal chemicals will cause skin burn If you come into contact with the internal contents of a battery immediately wash the skin in warm water Battery Installation The battery compartments for the 6 C batteries and 2 AA batteries are located on the back panel To open the battery compartment covers press the door locking tabs in the direction of the arrows Remove the doors and insert the 6 C and 2 AA batteries in their respective compartments Be sure the batteries are installed correctly according to the polarity markings in the battery compartments If the batteries are installed incorrectly the unit will not work Battery Compartment After installing the batteries replace both battery compartment covers and make sure that they lock securely Battery Replacement When the sound output becomes weak and distorted during battery operation it is probably time to change the 6 C batteries Try operating the system with the AC adapter If the sound is normal with the AC adapter this confirms that the batteries are weak and should be replaced as soon as possible If exhausted batteries are left in the unit they may eventually leak and cause damage to the unit When changing the 6 C batteries always change all 6 at the same time and do not mix different types of batteries such as alkaline carbon zinc and nickel cadmium The 2 AA batteries are only used for maintaining the clock and tim
4. any accessory case or skin from the iPod before inserting it in the dock 4 To remove or replace an insert first remove the iPod from the dock then grip the insert and gently lift it upward and out of the dock wh 10 OPERATING INSTRUCTIONS CONTINUED Playing your iPod Important To prevent distortion during iPod playback you should go to the Main Menu of your iPod select the Settings Menu page select the EQ Setting and make sure that the EQ function is set to Off Main Menu Settings Menu EQ Setting gt Select Off After inserting the iPod in the dock as described above set the POWER switch of this system to the On position and the FUNCTION switch to the iPod position If necessary release the HOLD switch on the iPod and turn iton Select the song or album that you wish to play on the iPod using the click wheel navigation controls as usual Use the VOLUME control on this system to increase or decrease the speaker volume level The volume control on the iPod has no effect on the speaker volume level When you are finished listening press the POWER button to turn this system Off The display lighting will turn off If you are using the AC adapter the charging indicator will appear on the iPod display Important Note To prevent damage to the iPod we recommend that you do not play the iPod
5. if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures A Reorient or relocate the receiving antenna A Increase the separation between the equipment and receiver A Connect the equipment into an outlet on a circuit different from that to which the receiver is connected A Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Changes or modification not expressly approved by the party responsible for compliance could avoid the user s authority to operate the equipment 3 PREPARATION FOR USE Unpacking And Set Up Remove the main unit the AC adapter the accessory auxiliary device connection cord and the 2 iPod adapters from the carton and remove all packing material from the main unit We recommend that you save the carton and packing material in
6. listed above REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER IT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above exclusions or limitations may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state
7. sound distorted on AM or FM broadcasts Station not tuned properly for AM or FM Retune the AM or FM broadcast station FM Rod antenna is not extended Extend FM Rod antenna AM The bar antenna is not positioned correctly Reposition the unit until best reception is obtained FM STEREO indicator does not light The BAND switch is not set to FM position Set the BAND switch to FM ST Position AM or FM no sound Function switch is not set to RADIO Set the Function switch to RADIO Volume at minimum Increase Volume iPod Player Unit does not respond no power AC adaptor is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit iPod does not dock porperly Using no or wrong iPod insert iPod did not install properly Make sure the dock insert is the proper fit for the iPod Remove the iPod from the dock and check for obstruction on the connections in the dock and on the iPod Then reseat it in the dock iPod does not respond to the unit iPod is not installed properly Remove the iPod from the dock and check for obstruction on the connectors in the dock and on the iPod9 Then reseat it in the dock iPod is locked up Please make sure your iPod is working properly befor
8. the event that the unit ever needs to be returned for service Using the original carton and packing material is the only way to protect your unit from damage during shipment Remove any descriptive labels or stickers from the top or front panels of the unit but do not remove any labels or stickers from the back or bottom panels Remove the dummy iPod display card from the docking area and discard it Power Sources This system is designed to operate on 6 C batteries not included or on normal 120V AC house current with the included AC adapter In addition this unit requires 2 AA batteries for the clock and alarm memory back up We recommend that you use a well known brand of alkaline batteries for longest life and best performance Attempting to operate this system from any other power source may cause damage to the system and such damage is not covered by your warranty Battery Precautions Replacement of batteries must be done by an adult Do not mix old and new batteries Do not mix alkaline standard carbon zinc or rechargeable nickel cadmium batteries The supply terminals are not to be short circuited Non rechargeable batteries are not to be recharged Exhausted batteries are to be removed Only batteries of the equivalent type are to be used Batteries are to be inserted with the correct polarity Dispose of batteries properly Do not dispose of batteries in fire The batteries may explode or leak
9. when you are carrying this system around as a portable The system should be placed in a stable secure position before connecting and operating the iPod 11 OPERATING INSTRUCTIONS CONTINUED Listening To A Non Docking iPod Or Other Portable Music Player Some early iPod models and the iPod Shuffle do not include the 30 pin docking connector found on most other iPods We have provided an Auxiliary Input Jack on the back panel of this system and included a stereo connection cable so that you can still connect non docking iPods other MP3 players or personal CD players to this system Locate the stereo connection cable supplied with this system Connectone end of the 3 5mm stereo cable into the auxiliary input jack AUX located on the back of the unit and other end to the headphone or line out jack on your portable audio device Set the POWER button to the On position and the FUNCTION button to the AUX position Also turn on your external portable audio player Use the VOLUME control to adjust the system volume You may need to adjust your device volume too When you are finished listening set the POWER button to the Off position Remember to shut off the power to your portable audio player as well Important Note Remember to disconnect the stereo connection cable from the Aux Jack before inserting an iPod in the
10. DockIT Portable Docking Station for your iPod The Perfect Portable Speaker System with Stereo Radio and Digital Alarm Clock Q innovative technology Made for all iPod models including iPod nano iPod shuffle and iPod mini OWNER S MANUAL 1 5022 CAUTION TO PREVENT FIRE OR SHOCK HAZARD DO NOT USE THIS PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow WARNING TO REDUCE THE The exclamation point within head symbol within an equi RISK OF ELECTRIC SHOCK an equilateral triangle is in lateral triangle is intended to DO NOT REMOVE COVER tended to alert the user to alert the user to the presence OR BACK NO USER the presence of important of uninsulated dangerous voltage operating and maintenance within the product s enclosure SERVICEABLE PARTS INSIDE P 3 bid servicing instructions in that may be of sufficient REFER SERVICING TO A magnitude to constitute a risk QUALIFIED SERVICE ihe ud accompany of electric shock to persons PERSONNEL ing the appilance The Caution Marking maybe located at the bottom enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions Keep these instructions Follow all instructions Heed all war
11. also included an auxiliary input jack so that you can also connect non dockable iPod such as the first generation models or the iPod Shuffle or even other brands of MP3 players and portable CD players to this system The required connection cable is included of course We have taken great care to ensure this system was in perfect working order when it left our factory If you experience any problems with the set up or operation of this system please contact the supplier iPod is a trademark of Apple Computer Inc registered in the U S and other countries IMPORTANT NOTES AAvoid installing this unit in places Operate controls and switches as exposed to direct sunlight or close to described in the manual heat radiating appliances such aS Before turning on the power make electric heaters on top of other stereo certain that the AC DC adapter is equipment that radiates too much heat places lacking ventilation or dusty areas places subject to constant vibration and or humid or moist areas properly installed A When moving the set be sure to first disconnect the AC DC adapter FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and
12. docking station 12 OPERATING INSTRUCTIONS CONTINUED SETTING THE ALARM ALARM 6 08 Press and hold the ALARM SET button to enter the alarm Time setting mode The front panel display will change from current time to alarm time Note The POWER switch must be set to the Off position to adjust the Alarm time While continuing to hold the ALARM SET button press the HOUR button repeatedly until the display shows the desired wake up hour While continuing to hold the ALARM SET button press the MINUTE button repeatedly to se the desired wake up minute When the desired wake up time appears on the display release all the buttons Press the ALARM ON OFF button to activate the alarm The ALARM indicator on the front panel will turn On Setthe FUNCTION selector to the desired alarm mode Radio or Buzzer When the actual time matches the alarm time the system will turn on to the radio or buzzer alarm automatically The radio or buzzer will continue to operate for one hour and then shut off and reset itself for the same time on the following day To stop the alarm sooner press the ALARM ON OFF button to deactivate the alarm The ALARM indicator on the front panel goes Off 13 TROUBLESHOOTING GUIDE Symptom Possible Cause Solution Radio Noise or
13. e docking into the unit Please refer to the iPod manual for details Using first or second generation iPod iPod Shuffle or other devices This unit cannot control those iPods or other devices iPod did not charge up iPod is not installed properly Remove the iPod from the dock and check for obstruction on the connectors in the dock and on the iPod Then reseat it in the dock iPod is locked up frozen Please make sure your iPod is iPod battery has problem working properly before docking into the unit Please refer to your iPod manual for details 14 CARE AND MAINTENANCE If the cabinet becomes dusty wipe it with a soft cloth If the cabinet becomes smudged or dirty clean it with a soft slightly dampened cloth Never allow water or any liquid to get inside the cabinet Never use any abrasive cleaners or cleaning pads as these will damage the finish of your unit 15 Innovative Technology Electronics Corp Limited Warranty 90 Days Labor One Year Parts Innovative Technology Electronics Corp IT warrants the product to be free from Defects in materials under normal use for a period of One Year from the date of the original purchase The Warranty is Not transferable IT agrees that within the initial 90 Day period to repair the product if it is determined to be defective at No Charge It is further agreed that IT will cover the cost to repair or r
14. ent centers everywhere and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture LOCATION OF CONTROLS AND INDICATORS 1 23456 7 8 1 VOLUME Control 2 POWER Mode Button ON OFF ALARM ON 3 DBBS Button 4 FUNCTION Button iPod AUX Buzzer RADIO 5 FM AUTO AM Button 6 ALARM ON OFF Button 7 TUNING Control 8 FM Antenna 9 Left Speaker 10 LCD Display 11 FM Stereo Indicator 12 Power Indicator 13 Right Speaker 14 ALARM SET Button 15 TIME SET Button 16 MINUTE Button 17 HOUR Button 18 AUX IN Jack 19 Battery Compartment 20 Backup Battery Compartment inside 21 PHONES Jack 22 AC Adapter Jack 23 iPod holder 2 inserts LCD DISPLAY Lf BSB Fig 1 ao ALARM AM 8 3 Fig 2 Radio mode 1 Band Indicator AM FM 2 Radio Frequency Clock Timer Mode 3 Alarm On Indicator 4 Time Alarm Time Display OPERATING INSTRUCTIONS SETTING THE CLOCK Make sure the POWER switch is set to the Off position The time or alarm time cannot be set or adjusted while the unit is On Press and hold the TIME SET button While holding the TIME SET button press the HR SET button to adjust the hour While holding the TIME SET button press the MINUTE SET button to adjust the minute Release all buttons to complete time setting
15. eplace damaged Parts only for a total period of One Year from the date of original purchase The warranty does not cover cosmetic damage antennas AC cords cabinets headbands ear pads or damage due to line power surges connection to improper voltage supply or settings misuse mishandling accident acts of God or attempted repair by an unauthorized service agent To obtain service please contact IT for Merchandise Return Authorization MRA number by sending a self addressed stamped envelope to the address below The original purchaser MUST present a sales receipt proof of purchase indicating date of purchase amount paid and place of purchase Send the unit prepaid to the address below in the original packaging or reasonable substitute to prevent damage You Must include your full name shipping address and telephone number and Merchandise Return Authorization MRA number for our reference No return will be shipped back to a PO Box Please include your check or money order in the amount of 12 00 payable to Innovative Technology Electronics Corp to cover handling and return shipping charges IT will not be responsible for delays or unprocessed claims resulting from a purchaser s failure to provide any or all of the necessary information Send all inquires or returns to Customer Service Dept Innovative Technology Electronics Corp 4 Anchor Way Port Washington NY 11050 Tel 631 265 3220 There are no express warranties except as
16. er memory and therefore they will probably last longer than the 6 C batteries Two fresh alkaline AA batteries should provide back up power for the clock and timer for a period of 12 month Using The AC Adapter Connect the small female plug of the AC adapter to the DC Input Jack on the back panel Connect the housing of the AC adapter to the 120V AC outlet When the adapter is connected to the unit the AC power source is selected automatically even if there are batteries in the battery compartment Note In order to operate the unit on batteries the AC adapter must be completely disconnected from the DC Input Jack on the back panel NOTES The housing of the AC adapter may become warm during operation This is normal To reduce the risk of electric shock never connect or disconnect the AC adapter while your hands are wet Protect Your Furniture This model is equipped with non skid rubber feet to prevent the product from moving when you operate the controls These feet are made from non migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture However certain types of oil based furniture polishes wood preservatives or cleaning sprays may cause the rubber feet to soften and leave marks or a rubber residue on the furniture To prevent any damage to your furniture we strongly recommend that you purchase small self adhesive felt pads available at hardware stores and home improvem
17. iquids such as vases shall be placed on the apparatus 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over e Do not overload wall outlet Use only power source as indicated N LA Use replacement parts as specified by the manufacturer 13 14 15 The product may be mounted to a wall only if recommended by the manufacturer 16 Upon completion of any service or repairs to this product ask the service technician to perform safety checks Thank you For purchasing this iPod Compatible Portable Stereo System This compact portable system features a built in iPod docking station so you can play your iPod through the speakers of this system when you are in the mood to share your music with others or when you simply do not want to use earphones In addition when this system is connected to an AC outlet with the included AC adapter it will also recharge the battery of any dockable iPod We have even included four separate inserts so that every dockable iPod currently available will fit correctly in the docking area This system also includes an AM FM Stereo Radio with digital station frequency display for more precise tuning and a digital alarm clock that can wake you to the radio or an electronic buzzer Finally we have
18. nings 2 Do not use this apparatus near water 3 Clean only with dry cloth 4 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 5 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 6 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 7 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 8 Only use attachments accessories specified by the manufacturer 9 Unplug this apparatus during lightning storms or when unused for long periods of time 10 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 11 This appliance shall not be exposed to dripping or splashing water and no object filled with l
Download Pdf Manuals
Related Search