InFocus ST-HB42A User's Manual
Contents
1. abnormal occurs If you notice any smoke or odor from the monitor unplug the power cord immediately and contact your dealer Do not attempt to repair the monitor yourself Warning Do not install the monitor in a hot humid or excessively dirty location Operating the monitor in these types of environments may cause fire or electrical shock Warning To avoid risk of electrical shock do not touch the connector with wet hands Warning It is recommended that this Class A monitor be grounded Warning Do not block ventilation openings Locate the monitor in a well ventilated area without obstructions to intake or exhaust vents Warning Wash hands after handling the cables supplied with this monitor Warning The monitor remote control uses batteries Make sure the batteries polarity is aligned correctly Dispose of used batteries in accordance with local disposal laws Warning Do not move the monitor by yourself At least two people are required to move the monitor Follow all instructions in the monitor s Reference Guide when moving the monitor Warning If the monitor is installed against the wall maintain a adistance of at least 10 cm 4 between the monitor and the wall to provide adequate ventilation2. A 240V 4A 50 60Hz INF6501 100 240Vac 5A 50 60Hz INF5501 INF4201 InFocus reserves the right to alter product offerings and specifications at any time without notice SAFETY INSTRUCTIONS This monitor is designed and manufactured to operate within defined design limits and misuse may result in electric shock or fire To prevent the monitor from being damaged the following rules should be observed for the installation use and maintenance of the monitor Read the following safety instructions before operating the display Keep these instructions in a safe place for future reference Safety Definitions Warning Statements identify conditions or practices that could result in permanent personal injury Caution Statements identify conditions or practices that could result in damage to your equipment Safety Terms Warning To avoid the risk of electric shock or component damage unplug the monitor before connecting other components to it Caution Unplug the power cord before cleaning the monitor to avoid electrical shock Follow all instructions in the monitor s Reference Guide when cleaning the monitor Do not turn on the monitor immediately after cleaning to avoid a fire hazard electrical shock or component damage Caution Do not place the monitor on an unstable cart stand or surface which could result in serious personal injuries and monitor damage When mounting the monitor be sure to follow the manufacturer s instructions and o
3. DirectView Display Quick Start Guide Models INF4201 INF5501 and INF6501 InFocus Bright Ideas Made Brilliant InFocus InFocus Bright Ideas Made Brilliant Regulatory models ST HB42A ST HB55A ST HB65A 11850137 0G A Unpack the box Here s what s included Please read the safety instructions before setting up the monitor Gv Remote Reference Guide CD Power Cord VGA Cable Cleaning Cloth Registration Card Quick Start Guide Warranty Card Save the box and packing materials Put batteries in the remote The remote uses 2 AAA batteries Please dispose of batteries in an environmentally proper manner 4 Select source Connect source 3 Color coded connections make it easy You can connect more than one source if needed Connect to Computer Got an Apple computer You may need an adapter For more information see How To Guides at www infocus com support howto VGA Cable included Computer Connect to HDMI source www infocus com store part no SP HDMI 10M R p at T TE 5 WO OPO RO TTA a ot 0O00 eTa ret i ae jails ae oe i B component Audion SMideo Video Audioin S232 Oza A lo ao j eesse O Sess O esse ND ekgo voa Acan PC SPDIF Connect to DVD VCR 1 Connect video using either a Component S vid
4. IE source button VGA HDMI1 HDMI2 COMP component VIDEO composite or S V S video The power light will light green InFocus TURN OVER Adjust the picture To adjust Image Settings mage Settings MALEC Mk Liner 1 Using the remote press the MENU button Ths Image Settings menu will display Press ENTER 2 Use A V lt P and ENTER to highlight and adjust the desired gt H options a J mong 3 When finished press the EXIT button to exit the menu system Turn off the monitor Press the power button To completely remove power from the monitor turn the power switch applicable to INF6501 and INF5501 only off and disconnect the power cord from the power outlet Buy a Wall Mount Stand and or cables at www infocus com store READ THE REFERENCE GUIDE Located on the Reference Guide CD The Reference Guide covers advanced setup and operation including SplitScreen instructions and monitor specifications TROUBLESHOOTING No Power Verify the power cord is properly connected to the power outlet and to the monitor Verify the monitor power switch is ON INF5501 and INF6501 only and that the power button all models is ON Verify the power outlet is supplying electricity Lightning static electricity and other external events may cause the monitor to act abnormally In this case unplug the power cord and wait for 1 to 2 minutes then plug back in and attempt to power up the monitor
5. again No Picture Verify that connections between the source and the monitor have been made correctly Verify that the cables are in good condition Verify the correct input source is selected and that the input signal is compatible with the monitor No Sound Verify that audio connections between the source and the monitor have been made correctly MUTE may have been pressed try pressing this button again Press the Volume Up button on the remote control Remote Control Does Not Function Properly Verify the batteries in the remote are properly aligned Replace batteries Move closer to the remote sensor on the monitor or turn off infrared equipment and or fluorescent lights which may be interfering with the remote s infrared signal Verify the infrared path between the remote and the monitor is clear and that the remote control is aimed at the remote control sensor on the monitor Monitor Shuts Down Suddenly The Sleep Timer may be activated Turn on the monitor and check the Sleep Timer setting Verify that a source is active The monitor may have overheated Remove any objects blocking the vent and clean as necessary Strange Faded Colors or Color Misalignment Ensure that the video cable is connected securely The picture may appear dim in a brightly lit room Adjust brightness contrast saturation color and tint Check the input signal setting No Color Dark Picture or Incorrect Colors Adjust the color saturatio
6. eo or Composite Cable www infocus com store part no SP CPNT 10M R SPSVIDEO 5M or SP CPSTVID 5M 2 Connect audio using a RCA Audio Cable www infocus com store part no SP RCAAUD 5M Component Cable xxx Best S Video Cable Better Composite Cable RCA Audio Cable Fe Th g ooo O O ie L R es E R RS232 SS Opes SO D eke PC SPDIF AC IN DVD VCR Also for game console cable box HDTV Receiver Turn on monitor and source Z Connect the power cord to the monitor and to an electrical outlet Turn on the power switch INF6501 and INF5501 only Household power outlet AC card cel 2 Turn on the monitor Touch the power button or press power on the remote The power light will light amber 3 Turn on computer or other source You may need to press a specific key combination to activate your laptop s external video port On most laptops hold down the FN key while pressing a key labeled CRT LCD LCD VGA a monitor icon L or similar Key combos for popular models Apple F7 HP Compaq Fn F4 or Fn F6 Sony Fn F7 Dell Fn F8 IBM ThinkPad Fn F7 Toshiba Fn F5 Fujitsu Fn F10 Complete laptop activation chart at www infocus com support Important If there is still no video restart your computer first make sure it s connected to the monitor and the monitor is turned on Power Source Using the remote press the desired PLNEN
7. n in the menu system Audio Noise Noise can occur when infrared communication equipment e g infrared cordless headphones is used near the monitor Move the infrared communication equipment away from the monitor to eliminate the noise CAUTION Do NOT attempt to repair a defective monitor yourself If the above troubleshooting tips do not solve the problem contact InFocus Corporation www infocus com service for support repair assistance Questions We re here to help Visit us at www infocus com support Europe Middle East Africa Spain 900 993 163 Customer Support Telephone UK 0800 028 6470 France 0800 905 993 Other 008000 463 6287 Germany 0800 181 3649 Mon Fri 08 00 17 00 CET Italy 0800 877 238 emea support infocus com USA Canada Latin America Customer Support Telephone 1 503 207 4700 TOLL FREE 877 388 8360 Mon Fri 6 am 5 pm Pacific Manufacturer InFocus Corporation 13190 SW 68th Parkway Suite 200 Portland Oregon 97223 8368 USA Trademarks Apple Macintosh and PowerBook are trademarks or registered trademarks of Apple Computer Inc IBM is a trademark or registered trademark of International Business Machines Inc Microsoft PowerPoint and Windows are trademarks or registered trademarks of Microsoft Corporation Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated InFocus In Focus and INFOCUS stylized are either registered trademarks or trademarks of InFoc
8. nly use the mounting hardware recommended by the manufacturer Only use a cart mount or stand recommended by the manufacturer or sold with the monitor Warning A distance of at least 3 feet should be maintained between the monitor and any heat source i e radiator heater oven amplifier etc Warning Never push any objects into the slot on the monitor cabinet Do not place objects on the top of the monitor It could short circuit parts causing a fire or electrical shock Warning The monitor is to be used with 110 220V power as indicated on the label If you are unsure of the type of power supplied to your business home consult your local dealer or the local power company Warning Only use the included power cord If a different power cord is needed contact the manufacturer Warning The power outlet should be located near the monitor and be easily accessible Warning Do not touch the power cord during lightning To avoid electric shock avoid handling the power cord during electrical storms Warning Refer all service to qualified service personnel Servicing the monitor yourself can be dangerous to you and will void the warrranty Warning Do not expose this monitor to smoke rain or moisture Do not spill liquids on the monitor If liquid penetrates the monitor unplug the power cord immediately and contact your dealer Continuous use in this case may result in a fire or electrical shock Warning Do not use the monitor if anything
9. us Corporation in the United States and other countries FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense WARNING This is a Class A monitor In a domestic environment this monitor may cause radio interference in which case the user may be required to take adequate measures This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation EN 55022 EN 61000 3 2 EN 61000 3 3 EN 55024 IEC61000 4 EN 60950 Low Voltage Directive 2006 95 EC Changes or modifications to this equipment that are not expressly approved by InFocus Corp may void the user s authority to operate the equipment Input ratings 100V 6
Download Pdf Manuals
Related Search