IBM T86A User's Manual
Contents
1. 2 I 3 The monitor height can now be adjusted Removing the Stand from the monitor 1 Lay the monitor face down on a flat surface NOTE It is important to place a soft cloth or other protective material beneath the monitor to avoid scratching the screen EN 2 Push up the cable cover and remove it 3 Remove the four mounting screws on the monitor Caution The stand is heavy and care should be taken to avoid dropping it DO 5 Remove the stand from the monitor Add Another Signal Cable B Remove the stand from the monitor as shown above 2 Remove the plate N A i 3 b lt 3 Atta2. TCO 95 applies to 9497 AG1 Mercury Mercury is sometimes found in batteries relays and switches Mercury damages the nervous system and is toxic in high doses TCO 95 requirement states that batteries may contain no more than 25 ppm parts per million or mercury It also demands that no mercury is present in any of the electrical or electronics components concerned with the display Mercury is for the time being permitted in the back light system of flat panel monitors as there today is no commercially available alternative TCO aims on removing this exception when a mercury free alternative is available TCO TCO 99 applies to 9497 AW1 Congratulations You have just purchased a TCO 99 approved and labelled product Your choice has provided you with a product developed for professional use Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products Why do we have environmentally labeled computers In many countries environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment The main problem as far as computers and other electronics equipment are concerned is that environmentally harmful substances are used both in the products and during their manufacture Since it is not so far possible to satisfactorily recycle the majority of electronics equip
3. them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation IBM may repair the failing Machine or exchange it at its discretion When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Any feature conversion or upgrade IBM or your reseller services must be installed on a Machine which is 1 for certain Machines the designated serial numbered Machine and 2 at an engineering change level compatible with the feature conversion or upgrade Many features conversions or upgrades involve the removal of parts and their return to IBM A part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under warranty service You also agree to ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange obtain authorization from the owner to have IBM or your reseller servi
4. i normali ambient domestici al fine de fornire un adeguata protezione con dispositivi di comunicazione autorizzati Utilizzare cavi e connettori collegati a terra per ridurre il rischio potenziale di interferenza delle comunicazioni radiotelevisive e di a tri apparecchi elettrici o elettronici cavi sono disponibili presso i rivenditori IBM In accordo con quando previsto nel documento EN 50082 1 1992 Performance Criterion A e importante sottolineare che in presenza di determinati campi elettromagnetici amp possibile che si verifichi un certo tremolio delle immagini Europeiska unionen EU Denna produkt har testats och foljer gransvardena for Klass B Information Technology Equipment enligt CISPR 22 Europeisk standard EN 55022 Gransvarden for Klass B utrutning utgar frar vanliga bostadsomraden for att ge ett rimligt skydd mot st rningar i kommunikationsenheter Korrekt avsk rmade och jordade kablar och kontakter m ste anvandas for att minska risken f r st rningar i radio och TV kommunikationer och annan elektrisk utrustning Sadana kablar och kontakter finns tillg ngliga hos auktoriserade IBM terf rs ljare enlighet med EN 50082 1 1992 Performance Criterion A p pekas f ljande narheten av en del elektromagnetiska f lt kan vissa bildst rningar uppst r p sk rmen 49 VCCI Class B Notice Japan Only This product complies with the limits for a Class B digital device devices used in or adjacent to a resid
5. ltlich In bereinstimmung mit EN 50082 1 1992 Leistungskriterium A wird darauf hingewiesen da bestimmte elektromagnetische Felder ein Flattern auf dem Bildschirm hervorrufen k nnen Declaracion de la Union Europea UE Este producto ha sido probado y cumple con las limitaciones estipuladas para la Clase B ITE Information Technology Equipment de conformidad con CISPR 22 Estandar Europeo EN 55022 Las limitaciones de los equipos de Clase B se estableicieron para que los entornos residenciales tipicos a fin de proporcionar una proteccion razonable contra interferencias con dispositivos de comunicacion autorizados Se deben utilizar concetores y cables debidamente protegidos y conectados 48 a tierra a fin de reducir las posibilidades de que se produzcan interferencias con comunicaciones por radio o television y otros equipos electricos o electr nicos Este tipo de cables y conectores pueden adquirirse en concesionarios autorizados de IBM De acuerdo con la norma EN 50082 1 1992 Performance Criterion A habria que destacar que en presencia de determinados campos electromagn ticos podria observarse una marcada inestabilidad e la imagen Dichiarazione di conformita dell Unione Europea EU Questo prodotto e stato collaudato e trovato conforme ai limiti de Classe B relativi agli apparecchi informatici secondo quanto dispone la normativa europea CISPR 22 EN 55022 limiti degli apparecchi di Classe B sono stati definiti per
6. or call your IBM Help Center In the US call 1 800 772 2227 In Canada call 1 800 565 3344 26 Specification 7 LCD Panel 18 1 TFT Dimensions W x H x D Width 418mm W Depth 260mm H Height 400 530mm D Stand Range Vertical Tilt Lift Power Supply Universal Input voltage 100 240VAC at Power consumption 65W max User controls Regulatory Compliance UL CSA FCC TUV GS CCI CE D N S F SASO CCIB CCE TUV Ergo SISIR MEEI PCBC EZU SIQ NOM GOST C Tick BCIQ TCO95 9497 AG1 TCO99 9497 AW 1 MPRIII NUTEK SQTSB Display Area 359mm H x 287 2mm V Ambient Temperature Operating BIC oa E Shipping 20 C 60 C Storage 20 C 60 C Humidity Operating 10 80 Shipping 5 95 Storage 5 95 27 Warranty Statements The warranty statements consist of two parts Part 1 varies by country Part2 is the same for both statements Be sure to read both the Part 1 that applies to your country and Part 2 e Worldwide except Canada Puerto Rico Turkey and United States Z125 5697 01 11 97 Part 1 General Terms e Worldwide Country Unique Terms Part 2 Country Unique Terms e United States Puerto Rico and Canada Z125 4753 05 11 97 Part 1 General Terms Translations of IBM s warranty statements also can be found on the Installation Diskette Your Installation Diskette includes translations of IBM s Statement of Warranty in the following languages J Danis
7. plug must be connected to a properly wired and grounded power outlet Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets To isolate the monitor from the electrical supply you must remove the plug from the power outlet The power outlet should be easily accessible IN DANGER Pour eviter les risques d lectrocution Ne retirez pas les capots du moniteur N utilisez pas ce produit si le socle n est pas fixe Ne connectez ni ne d connectez ce produit pendant un orage Le cable d alimentation doit tre connecte une prise lectrique correctement mise a la terre et en bon tat de marche Tout quipement auquel ce produit est reli doit tre galement connect a une prise correctement mise la terre et en bon tat de marche Pour isoler le moniteur de la source d alimentation electrique vous devez le d brancher de la prise lectrique Cette prise doit tre facile d acc s ZN GEFAHRENHINWEIS Um die Gefahr eines elektrischen Schlags zu vermeiden folgendes beachten Unter keinen Umstanden die Abdeckungen abnehmen Das Produkt nicht in Betrieb nehmen wenn der Sockel nicht montiert ist Das Gerat nicht w hrend eines Gewitters an eine Steckdose anschliefsen oder von ihr trennen Das Netzkabel ist an eine ordnungsgem verdrahtete und geerdete Steckdose anzuschlie en Jedes Ger t mit dem dieses Produkt verbunden wird mu ebenfalls an eine or
8. prolonged close work can be visually demanding Look away from the screen periodically and have your eyesight checked regularly v Screen settings Set the screen brightness and contrast to a comfortable level You may have to adjust this as the lighting changes during the day Many application programs let you select color combinations which can help you to view in comfort See the Adjusting the Monitor section for more information Adjusting the Monitor Position Y Rotation The monitor can be put in portrait or landscape mode as shown below Note The rotate mechanism will not operate when the monitor is in the lowest position N Step 1 Step 2 Step 3 You can tilt the screen backward and forward tilt 1 29 degrees as shown below You can adjust the screen height by a maximum of 130mm O You can swivel the base around swivel 300 degrees lt Removing the Locking Pin and Lifting the Monitor The monitor has a locking pin to stop the screen from moving in transit Before the height adjustment can be used you must remove the locking pin from the stand 1 With the rear of the monitor facing you locate the locking pin as show in diagram Cd
9. standards UNITED KINGDOM Limitation of Liability The following replaces items 1 and 2 of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence 2 the amount of any other actual direct damages or loss up to the greater of Pounds Sterling 150 000 or 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim The following item is added to this paragraph 3 breach of IBM s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982 Applicability of suppliers and resellers unchanged The following is added to the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default will be limited to damages 37 NORTH AMERICA CANADA Warranty Service The following is added to this Section To obtain warranty service from IBM call 1 800 565 3344 UNITED STATES OF AMERICA Warranty Service The following is added to this Section To obtain warranty service from IBM call 1 800 772 2227 IBM Statement of Limited Warranty for United States Puerto Rico and Canada Part 1 General Terms This Statement of Limited Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 may replace or
10. suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS 41 INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU 42 Compliance Federal Communications Commission FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one
11. sure to read the Safety instructions at the front of this User s Guide before carrying out this procedure 1 Make sure that the computer power is turned off 2 Plug the video signal cable into the video signal connector of your computer 10 3 Plug the power cord into the monitor 4 Connect the other end of power cord to a properly grounded electrical outlet 5 Switch on the computer and the monitor 11 Configuring Your Monitor Automatic Setup When you first use your monitor you must perform Automatic Setup AUTO SETUP This procedure sets up your monitor to process the video signals from your computer without image discoloration or smearing After you perform AUTO SETUP the settings are stored and used each time you turn on the monitor The Setup Utility included on the setup diskette is for displaying a test pattern It does not replace or modify the display driver The Automatic Setup instructions require the monitor to be warmed up for 15 minutes This is not required for normal operation SETUP Diskette for Windows 95 or Windows 98 or Windows 2000 To use the Plug and Play feature in Windows 95 or Windows 98 or Windows 2000 files should be loaded from the IBM FLAT PANEL Monitor Installation diskette as follows 1 Turn off the computer and all attached devices 2 Ensure that the monitor is connected correctly 3 Turn on the monitor and then the system unit Allow the system to b
12. ANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine Unless specified otherwise IBM provides non IBM machines WITHOUT WARRANTIES OF ANY KIND Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND 39 Warranty Service To obtain warranty service for the Machine contact your reseller or IBM In the United states call IBM at 1 800 772 2227 In Canada call IBM at 1 800 565 3344 You may be required to present proof of purchase IBM or your reseller provides certain types of repair and exchange service either at your location or at a service center to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation IBM may repair the failing Machine or exchange it at its discretion When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionall
13. EIS Goa na ee eR 47 Setup i Unpacking Check following items If they are missing or damaged consult your place of purchase immediately LCD monitor DVI Analogue signal cable Power Adapter Power Cord User Guide Installation Diskette SS Hardware Requirements This monitor requires a computer with a suitable on board sub svstem or Video Adapter card that can support SXGA 1280x1024 XGA 1024x768 SVGA 800x600 or VGA 640x480 at 60Hz Note Recommended operating mode is 1280 x 1024 60 Hz Workplace Preparation v Height The monitor should be positioned so that the top of the screen is slightly below your eye level when sitting at your workstation v Orientation gt Choose a position that gives the least reflection from lights and windows usually at a right angle to any windows gt The monitor should be positioned directly in front of you so that you do not have to twist your body to use it gt Tiltthe monitor to a comfortable viewing angle Working Practices v Rest Take regular breaks Vary your posture stand up and stretch occasionally as prolonged use of computer workstations can be tiring v Back You should sit back in your chair and use the backrest v Hands Use a light touch on the keyboard keeping your hands and fingers relaxed Allow a space in front of the keyboard to rest your wrists when not typing Consider using a wrist pad v Eyesight Working with monitors in common with any
14. GE SET UP function is used to compensate for noise in the video signals which causes horizontal lines or areas on the screen lt where the image appears IMAGE SET UP to be unstable and jitters or shimmers This can be done automatically or manually If manual is selected the user will go to the manual adjustment screen 18 Manual Fine Coarse Dien ed LE If selected image will automatically adjusted This allows you to remove horizontal and clear sharpen appearance characters Fine adjustments should be made after making Coarse adjustments Control and Description sub menu s Adjustment Lal OSD Position gt 0 lt RESET Select the Preset Color Preset 1 Warm White Preset 2 COLOR MODE Normal White Preset 3 Cool white Mode you find most comfortable USER COLOR Use the User Color Mode MODE menu if necessary to define your own color preference Increases or e Red decreases redness e Green Increases or e Blue D H POSITION Changes the position of Reset returns all available functions apart from language which will e YES not change unless adjusted via the NO LANGUAGE menu to their factory presets 19 EZ and Description sub me EZ Selects video input 1 or me 1 un 2 video input 2 Input Selection Moves the displayed image left or right H POSITION Moves the displayed V POSITION image up or down NORMAL original 5 Disp
15. P P N VESA 1152x870 68 68 N 75 06 N 100 00 1152x900 61 84 P 66 00 P 9450 1280x1024 64 00 P 60 00 P 108 00 VESA 1280x1024 75 83 N 71 53 N 128 00 U UZ UZ UZIZ Z VU UIVUVZIZ AN 1280x1024 81 18 N 135 09 Notes 1 The timing with symbol are adjusted in the factory 2 P N stands for Positive Negative polarity of incoming timing 23 Power Management To benefit from power management the monitor must be used in conjunction with a computer that implements the Video Electronics Standards Association VESA Display Power Management Signaling DPMS Standard The power management feature is invoked when the computer recognizes that you have not used your mouse or keyboard for a user definable period There are several states as described in the table below IBM recommends that you switch off your monitor at the end of each working day or whenever you expect to leave it unused for long periods during the day Power Restoring Ge Operation Steady green Normal DPMS Onis seriy a amber move the mouse DPMS Suspend Flashing amber move the mouse move the mouse Your flat panel monitor consumes less than 3W when in the DPMS standby suspend or off state Product Disposal The fluorescent lamp in the liquid crvstal displav contains mercurv Dispose of it as required by local ordinances and regulations 24 Tro
16. These user s setup instructions cover typical user environments The on screen messages may differ depending on the level of your hardware and software In some cases you may need to vary the setup procedures For more information refer to your computer or operating system manuals or consult your system administrator or dealer Ces instructions de configuration s appliquent aux environnements d utilisation typiques Les messages affich s l cran peuvent varier en fonction de votre configuration materielle et logicielle Dans certains cas il peut tre n cessaire de changer les proc dures de configuration Pour de plus amples informations veuillez consulter les manuels de votre ordinateur et de votre systeme d exploitation ou consultez l administrateur de votre systeme ou votre revendeur Diese Anweisungen zur Installation durch den Benutzer gelten fur typische Betriebsumgebungen Die Bildschirmmeldungen k nnen je nach Art der verwendeten Hardware und Software auch anders lauten In einigen Fallen mussen die Einstellungsschritte unter Umstanden abgeandert werden Weitere Informationen finden Sie im Computer order Betriebs systemhandbuch oder wenden Sie sich an Ihren System administrator oder Fachh ndler Estas instrucciones sobre la configuraci n abarcan t picos entornos de usuario Los mensajes en pantalla pueden diferir seg n el nivel de su hardware y software En algunos casos puede que sea necesario variar los procedimie
17. ace of purchase for warranty service information Some IBM Machines are eligible for On site warranty service depending on the country where service is performed 29 The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise During the warranty period IBM or your reseller if approved by IBM to provide warranty service will provide repair and exchange service for the Machine without charge under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine lf a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded The replacement may not be new but will be in good working order Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not respo
18. are only limited to the extent permitted by the applicable legislation Extent of Warranty The following replaces the first and second sentences of this Section The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment operation in other than the Specified Operating Environment improper maintenance by you or failure caused by a product for which IBM is not responsible Limitation of Liability The following is added to this Section Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 IBM s liability is limited to the repair or replacement of the goods or the supply of equivalent goods Where that condition or warranty relates to right to sell quiet possession or clear title or the goods are of a kind ordinarily acquired for personal domestic or household use or consumption then none of the limitations in this paragraph apply PEOPLE S REPUBLIC OF CHINA Governing Law The following is added to this Statement The laws of the State of New York govern this Statement INDIA Limitation of Liability The following replaces items 1 and 2 of this section 1 liability for bodily injury including death or damage to real property and tangible personal property will be limited to that caused by IBM s negligence 2 aS to any other actual damage arising in any situation involving nonperformance by IBM purs
19. ce a Machine that you do not own and where applicable before service is provided follow the problem determination problem analysis and service request procedures that IBM or your reseller 31 provides secure all programs data and funds contained in a Machine provide IBM or your reseller with sufficient free and safe access to your facilities to permit them to fulfill their obligations and inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Production Status Each IBM Machine is manufactured from new parts or new and used parts In some cases the Machine may not be new and may have been previously installed Regardless of the Machine s production status IBM s appropriate warranty terms apply Limitation of Liability Circumstances may arise where because of default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach ne
20. ch the other cable 00 A gt I ET O H 10 4 Attach the plate 00 a de 5 Insert the power cable and signal cables into the hole of the stand 6 Attach the 4 screws Caring for your Monitor Be sure to turn off the power before you perform any maintenance on the monitor Clean your monitor as follows e Gently wipe the covers and the screen with a soft cloth e Remove finger marks and grease with a damp cloth and mild detergent do not use solvents or abrasives e Never apply detergent or other liquid directly to the screen Dampen the cloth and then wipe e Never use flammable cleaning material to clean your IBM monitor or any other electrical apparatus Maintenance 1 Do not expose the monitor to direct sunlight or heat Do not spill liquid on the monitor 3 Do not attempt to open the monitor For service see the Troubleshooting section 4 Do not place anything on your monitor Poor ventilation will elevate the temperature in the monitor Installing the Monitor Installing the Monitor This monitor is equipped with an auto sensing power supply for voltage range 100V ac to 240V ac at 50Hz or 60Hz A Be
21. d by the Underwriters Laboratories UL and certified by the Canadian Standards Association CSA For units intended to be operated at 115 volts Use a UL listed and CSA certified cord set consisting of a minimum 18 AWG type SVT or SJT three conductor cord a maximum of 4 5 meters 15 feet in length and a parallel blade grounding type attachment plug rated 15 amperes 125 volts For units intended to be operated at 230 volts U S use Use a UL listed and CSA certified cord set consisting of a minimum 18 AWG type SVT or SJT three conductor cord a maximum of 4 5 meters 15 feet in length and a tandem blade grounding type attachment plug rated 15 amperes 250 volts For units intended to be operated at 230 volts outside the U S Use a cord set with a grounding type attachment plug rated 13 amperes minimum 250 volts The cord set should be marked lt HAR gt and have the appropriate safety approvals for the country in which the equipment will be installed Note The accessible metal parts of the display power adapter output connector are not directly connected to Safety Ground Industry Canada Compliance Statement The Class B digital apparatus meets the requirements of the Canadian Interface Causing Equipment Regulation Declaration de Conformit Industrielle du Canada Cet appareil num rique de Categorie B est conforme aux exigences de la Reglementation canadienne concernant les interfaces provoquant une interference 44
22. dnungsgem verdrahtete und geerdete Steckdose angeschlossen werden Um den Monitor von der Stromversorgung zu trennen mu der Stecker aus der Steckdose gezogen werden Die Steckdose sollte leicht zug nglich sein UN GEVAAR Ga als volgt te werk om het gevaar van een elektrische schok te voorkomen Verwijder in geen enkel geval de kap Stel dit produkt alleen in werking als de voet is bevestigd Sluit dit apparaat niet aan op of verbreek de aansluiting van dit apparaat niet van een contactdoos tijdens onweer Het netsnoer moet worden aangesloten op een geaarde contactdoos met correcte bedrading Ook alle apparatuur waarop dit produkt wordt aangesloten moet zijn aangesloten op een contactdoos met correcte bedrading Om het beeldscherm te ontkoppelen van de netvoeding dient u de stekker uit de contactdoos te trekken De contactdoos dient goed toegankelijk te zijn Z PELIGRO Para evitar riesgos de descargas el ctricas No retire bajo ningun concepto las cubiertas No maneje el monitor sin antes acoplar el soporte No conecte ni desconecte el equipo de una toma de alimentacion durante una tormenta el ctrica El cable de alimentacion debe estar conectado a un enchufe debidamente cableado y con toma de tierra Cualquier equipo al que se vaya a conectar este producto tambien debe estar conectado a tomas de alimentaci n cableadas y conectadas a tierra correctamente Para aislar el monitor del suministro electrico debe retirar el
23. e while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Production Status Each IBM Machine is manufactured from new parts or new and used parts In some cases the Machine may not be new and may have been previously installed Regardless of the Machine s production status IBM s appropriate warranty terms apply Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim IBM is liable for no more than damages for bodily injury including death and damage to real property and tangible personal property and the amount of any other actual direct damages up to the greater of U S 100 000 or equivalent in local currency or the charges if recurring 12 months charges apply for the Machine that is the subject of the claim This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its
24. elow When test pattern appears press the OSD On Screen Display entry key lt and then use the left and right arrow key to highlight the image set up icon KI Press enter key to enter sub menu and then press enter key again to activate the auto setup procedure Image Setup will auto adjust H position V position Pixel Clock and Phase Note Direct access to the auto setup function is also provided by simultaneously pressing the left and right arrow keys 5 6 When finished the main OSD menu will be displayed Press any computer keyboard key to exit the test pattern 13 Operating Step3 System Windows 3 1 Open Select Select RUN Type PROGRAM FILE ANTESTPAT ON MANGER and press Windows Windows 95 Select START Select RUN ENTER Windows ee Windows one 000 e You have completed the monitor setup for Windows operating system 14 Adjusting the Monitor User Controls User controls features Direct Access Function EUNSHON Dein SM Menu Controls 1 Exits from menus sub gt Selects video input 1or 2 menus 2 Exits from OSD Brings up Brightness control OSD Left and Right arrows pressed together bring up auto setup OSD Brings up Contrast control OSD Left and Right arrows pressed together bring up auto setup OSD Moves the cursor to highlight icons or make adjustments Moves the cursor to highlight icons or make adjustments pressed for 10 seconds Enters highlighted menus C
25. en ab 60 Hz ohne Zeilensprung benutzt werden Die Konvergenz des Bildes kann sich auf Grund des Magnetfeldes am Ort der Aufstellung aus der Korrekten Grundeinstellung ver ndern Zur Korrektur empfiehlt es sich deshalb die Regler an der Frontseite f r H STAT und V STAT so einzustellen da die getrennt sichtbaren Farblinien f r Rot Gr n und Blau bei z B der Darstellung eines Buchstabens zur Deckung Konvergenz gelangen Siehe hierzu auch die Erkl rungen zu H STAT und V STAT European Union EU Statement This product had been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22 European Standard EN 55022 The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interface with licensed communication devices Properly shielded and grounded cables and connectors must be used in order to reduce the potential for causing interface to radio and TV communications and to other electrical or electronic equipment Such cables and connectors are available form IBM authorised dealers In accordance with EN 50082 1 1992 Performance Criterion A it should be noted that in the presence of certain electromagnetic fields some screen jitter may be observed Specifications de la CEE Ce produit a ete teste et declare conforme aux limites de la Classe B d finies 47 pour les equipements informatiques conform ment a la
26. enchufe de la toma de alimentacion Esta toma debera ser de facil acceso IN PERICOLO Per evitare il rischio di scariche elettriche Non rimuovere nessuna parte del telaio Non accendere il prodotto se il piedistallo non amp stato montato Non collegare o scollegare il prodotto nel corso di un temporale La spina del cavo di alimentazione deve essere collegata ad una presa di corrente con messa a terra installata in maniera appropriata Le apparecchiature a cui il prodotto viene attaccato devono essere collegate a prese di corrente con messa a terra installate in maniera appropriata Per isolare il monitor dalla corrente elettrica staccare la spina dalla presa di alimentazione che deve essere facilmente accessibile PERIGO Para evitar o perigo de choques el ctricos Nao retire as coberturas II Nao utilize este produto antes de montar a base Nao ligue nem desligue este produto durante uma tempestade el ctrica O cabo de alimentac o deve ser ligado a uma tomada el ctrica devidamente ligada a terra Qualquer equipamento ligado a este produto deve estar ligado a tomadas el ctricas devidamente ligadas a terra Para isolar o monitor da fonte de alimentac o retire a ficha do cabo de alimentac o da tomada el ctrica Atomada el ctrica deve ser de facil acesso A FARE Sadan undgar du elektrisk stod Kabinettet m under ingen omstaendigheder fjernes Undg at anvende dette produkt uden at vippe drejefoden er mo
27. ential environment and conforms to the standards for information technology equipment that are set by the Voluntary Control Council for Interference for preventing radio frequency interference in residential areas VCCI B 50
28. gligence misrepresentation or other contract or tort claim IBM is liable for no more than damages for bodily injury including death and damage to real property and tangible personal property and The amount of any other actual direct damages up to the greater of U S 100 000 or equivalent in local currency or the charges if recurring 12 months charges apply for the Machine that is the subject of the claim This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS 32 INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU Statement of Warranty Part 2 Country unique Terms ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other legislation and
29. h Z1255697 dan htm Greek Z1255697 gre htm talian 28 Japanese 21255697 jap htm Korean LIZ1255697 korhtm Portuguese Z1255697 por htm Slovenian 21255697 sie htm Spanish 21255697 spa htm wedish aiwanese Turkish 21255698 tur htm English 21255698 eng htm United States Puerto Rico and Canada Statement of Limited Warranty French Canadian IBM Statement of Warranty World wide except Canada Puerto Rico Turkey United States Part 1 General Terms This Statement of Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 may replace or modify those of Part 1 The warranties provided by IBM in this Statement of Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Warranty affects any Statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller Machine 9497 Warranty Period Three 3 years Contact your pl
30. his document does not give you any license to these patents Trademarks The following terms used in this publication are trademarks or service marks of the IBM Corporation in the United States or other countries IBM IBM HelpCenter TABLE OF CONTENTS SD GLU en EE RR 1 Beie AC KIHO BEE 1 Hardware Requirements ANEN 1 Workplace Frepara lo EEN 1 WOIKINO PACINO SS ae ls cs id 2 A justing Ine Monitor POSIION EE 3 Removing the Locking Pin and Lifting the Monitor 4 Removing the Stand from the monitor 5 Add Anolher SINA CAD IC ae 7 Caring TOP YOU MONO nant nine entente fete anodin 8 ET 9 Installing the Monitor su 10 Install ng the Moor zen 10 Configuring Your MOnIOr au 12 MSN 12 SETUP Diskette for Windows 95 or Windows 98 or Windows 2000 12 Auto Setup for Windows 3 1 Windows 95 Windows 98 or Windows 2000 or MINIOWS Nl uses eldste 13 Adjusting the Monitor EE 15 User CONTOS runaa CN ee 15 CONTROLS LOCKFUNLOGCK nee 16 On screen display OSD controls 17 Further Information ser 22 Supported Timing Modes Vs 22 Power Management eee 24 POA CU BDISPOS EE 24 TTOUDIESTIO OLI e RE 25 SPECI CA Heger 27 Watt bater HOESER eg 28 COMPIIANCE EE 43 SE LEN RL EE 43 POWE CO Rk 44 Industry Canada Compliance Statement ss sessenennenzennnnenznnnnnenznnnzzznna 44 Declaration de Conformit Industrielle du Canada 44 TCO 95 applies to 9497 AG1 iii 45 TCO 99 applies to 9497 AW1 nn ennnnnn nananana nananana 45 HINW
31. i Onlemek icin Kapaklaryn yerini de ibtirmeyin Eder destek badly dedilse bu Uretimi calybtyrmayyn Elektrik cereyany acyk oldu u zaman bu uretimi badlamayyn veya kesmeyin Kablo fipi elektrik bebekesi ile ok iyi ba lanmyp olmalydyr ve tam tesisat borusuna ba lanmalydyr Hangi tesisat veya hangi uretim olursa olsun tam elektrik bebekesine ivi bir pekilde ba lanmalydyr ve tam tesisat borusuna takylmalydyr V Elektrik cereyany ekranyny tam izole etmek icin kablo fipini elektrik borusundan cykarynyz Elektrik borusu giripe kolaylykla acyk olmalydyr Gun ee RUE o u NTS ARETE BERN FIT7TeAV EY KEN VI IBM 186A LCD Color Monitor User s Manual First Edition January 2000 This publication could contain technical inaccuracies or typographical errors Known inaccuracies and errors may be corrected in later editions IBM may make improvements and or change
32. imitations and exclusions specified in the Statement of Warranty will not apply to damages caused by IBM with fraud or gross negligence and for express warranty In item 2 replace U S 100 000 with 1 000 000 DEM The following sentence is added to the end of the first paragraph of item 2 IBM s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence IRELAND Extent of Warranty The following is added to this Section Except as expressly provided in these terms and conditions all statutory conditions including all warranties implied but without prejudice to the generality of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded Limitation of Liability The following replaces items one and two of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence and 2 the amount of any other actual direct damages up to the greater of Irish Pounds 75 000 or 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim Applicability of suppliers and resellers unchanged The following paragraph is added at the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in res
33. ironmental policy which must be adhered to in each country where the company implements its operational policy The energy requirements include a demand that the computer and or display after a certain period of inactivity shall reduce its power consumption to a lower level in one or more stages The length of time to reactivate the computer shall be reasonable for the user Labeled products must meet strict environmental demands for example in respect of the reduction of electric and magnetic fields physical and visual ergonomics and good usability N As an ENERGY STAR Partner IBM Corporation has determined Lengt that this product meets the ENERGY STAR guidelines for energy efficiency MPRIII This product complies with Swedish National Council for Metrology MPR standards issued in 1989 according to MPRIII SVENSK standards SS 436 14 90 for very low frequency VLF and extremely low frequency ELF emissions 46 Hinweise Gem der Amtsbl tter des BMPT Nm 61 1991 und 6 1992 wird der Betreiber darauf aufmerksam gemacht da die von ihm mit diesem Ger t zusammengestellte Anlage auch den technischen Bestimmungen dieser Amtsblatter gen gen mu Aus ergonomischen Gr nden wird empfohlen die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden schlechte Erkennbarkeit Augenbelastung bei zu geringem Zeichenkontrast Aus ergonomischen Gr nden sollten nur Darstellungen auf dunklem Hintergrund bei Vertikalfrequenz
34. lays the image in its original size or image size expanded size to fill the full screen of your EXPANDED IMAGE SIZE monitor image expanded to fill the screen ENGLISH The language chosen affects only the e FRANCAIS language used for the OSD DEUTSCH Language It has no effect on any software running on ITALIANO the computer ESPANOL JAPANESE Selects the OSD display duration time Adjust to your OSD time Between 5 and 60 seconds preference 20 The model name serial number year of manufacture and current display mode are included in the information screen Informs the user of the current display e PRESET O mode and also shows the preset and user l modes stored in the monitor The current Information display mode is shown at the base of the USER MODE preset mode and user mode displays Use the left and right buttons to see the preset modes and user modes screens 21 Further Information Supported Timing Modes The Display mode the monitor uses is controlled by the computer Therefore you should refer to you computer documentation for details on how to change display modes For the display modes listed below the screen image has been optimized during manufacture 22 Input display mode Multi scan operation Address Horizontal Vertical Dot Clock Remark Actual ability Frequency Frequency Frequency display KHz Hz MHz resolution 640x480 37 86 N N 31 5 VESA SAS ES Ee
35. ldskarmen maste du dra ut kontakten Vagguttaget bor vara l tt att komma t VAARA S hk iskun vaaran v ltt miseksi l avaa laitteen kansia miss n tilanteessa l k yt laitetta ellei jalustaa ole kiinnitetty l kytke laitetta pistorasiaan tai irrota sit pistorasiasta ukonilman aikana Virtajohto on kytkett v asianmukaisesti johdotettuun ja maadoitettuun pistorasiaan Kaikki muutkin laitteet joihin t m tuote on liitetty on kytkett v asianmukaisesti johdotettuihin pistorasioihin Kun haluat erottaa n yttimen s hk verkosta sinun pit irrottaa sen verkkojohto pistorasiasta Pistorasian pit isi olla mahdollisimman l hell n ytint ja vaivattomasti k sill UN KINAYNOE 10 va QTTODUYETE TOV KIV UVO OTTO YTUTTA JOTA Mnv agaipeite Ta KAAUUNOTA Mn OETETE TO TTDOIOV OUTO OE AEITOUPYIA EKTOC E V EIVQI TOTTOBETNUEVO OTN Baon TOU Mn OUVO ETE ff ATTOOUVOEETE TO TTDOIOV AUTO KATA TN OIODKEIO N EKTPIK G KQTOIVIOOC O NAEKTPOOEKTNG TOU KOAWOIOU TIPETTEI VA OUVOEETAI OE KOVOVIKQ KOAWOIWUEVO KAI VEIOOUEVO AEKTDOOOTT OTOIMONTTOTE OUOKEUN UE tnv omoia OG OUVOEOgI TO TTDOIOV AUTO TTDETTEI ETTIONG va OUVOEETQI OE KOVOVIK KOAW IWUEVOUG KAI YEIOOUEVOUC N EKTPODOTEG 10 va MOVWOETE TOV EV EIKTN OTTO TNV N EKTPIKN TIAPOX TDETTEI VA APAIPEOETE TOV NAEKTPOOEKTN OTTO TV ECOOO NAEKTPIKOU PEUATOG H Eco0oc NAEKTPIKOU PEUNATOG TTPETTEI VQ eivai EUKOAQ TTDOODQOIUT A Tehlike Dok tehlikesin
36. m Applicability of suppliers and resellers unchanged FRANCE Limitation of Liability The following replaces the second sentence of the first paragraph of this Section In such instances regardless of the basis on which you are entitled to claim damages from IBM IBM is liable for no more than items 1 and 2 unchanged GERMANY The IBM Warranty for Machines The following replaces the first sentence of the first paragraph of this Section The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the Machine s conformity to its Specifications The following paragraphs are added to this Section The minimum warranty period for Machines is six months In case IBM or your reseller are unable to repair an IBM Machine you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded Extent of Warranty The second paragraph does not apply Warranty Service The following is added to this Section During the warranty period transportation for delivery of the failing Machine to IBM will be at IBM s expense Production Status The following paragraph replaces this Section Each Machine is newly manufactured It may incorporate in addition to new parts re used parts as well 35 Limitation of Liability The following is added to this Section The l
37. m you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchased an IBM Personal Computer Machine in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Georgia Hungary Kazakhstan Kirghizia Federal Republic of Yugoslavia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia or Ukraine you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM The applicable laws Country unique terms and competent court for this Statement are those of the country in which the warranty service is being provided However the laws of Austria govern this Statement if the warranty 34 service is provided in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Federal Republic of Yugoslavia Georgia Hungary Kazakhstan Kirghizia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia and Ukraine The following terms apply to the country specified EGYPT Limitation of Liability The following replaces item 2 in this Section 2 as to any other actual direct damages IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the clai
38. ment most of these potentially damaging substances sooner or later enter nature 45 There are also other characteristics of a computer such as energy consumption levels that are important from the viewpoints of both the work internal and natural external environments Since all methods of electricity generation have a negative effect on the environment e g acidic and climate influencing emissions radioactive waste it is vital to save energy Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy What does labeling involve This product meets the requirements for the TCO 99 scheme which provides for international and environmental labeling of personal computers The labeling scheme was developed as a joint effort by the TCO The Swedish Confederation of Professional Employees Svenska Naturskyddsforeningen The Swedish Society for Nature Conservation and Statens Energimyndighet The Swedish National Energy Administration Approval requirements cover a wide range of issues environment ergonomics usability emission of electric and magnetic fields energy consumption and electrical and fire safety The environmental demands impose restrictions on the presence and use of heavy metals brominated and chlorinated flame retardants CFCs freons and chlorinated solvents among other things The product must be prepared for recycling and the manufacturer is obliged to have an env
39. modify those of Part 1 The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Warranty affects any statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller Machine 9497 Warranty Period Three 3 years Contact your place of purchase for warranty service information Some IBM Machines are eligible for On site warranty service depending on the country where service is performed The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise 38 During the warranty period IBM or your reseller if approved by IBM to provide warra
40. norme europ eenne CISPR 22 EN 55022 Les limites impos es aux quipements de Classe B visent a garantir une protection raisonnable dans des environnements r sidentiels contre toute interference avec des quipements de communication agrees Des cables blindes et correctment relies a la terre doivent tre utilises pour r duire les risques dinterf rence avec des communications radio et t l vis es ainsi qu avec des equipements lectriques ou lectroniques Ces c bles et connecteurs sont disponibles aupr s de vos revendeurs IBM agr s Conform ment la norme EN 50082 1 1992 Critere de Performance A l utilisateur doit tre conscient du fait qu en presence de certains champs electromagnetiques l image peut tre instable Erklarung f r die Europaische Union EU Dieses Produkt worde getestet und dabei wurde festgestellt da es gem CISPR 2 Europ ische Norm EN 55022 die Grenzwerte f r Ausr stung der Informationstechnik Klasse B einh lt Die Grenzwerte f r Ausr stung der Klasse B wurden f r eine typische Wohnumgebung erarbeitet um einen angemessenen Schutz vor St rungen im Zusammenhang mit zugelassenen Kommunikations ger ten zu gew hrleisten Es sind ordnungsgem abgeschirmte und geerdete Kabel und Stecker zu verwenden um das Storungspotential in bezug auf Radio und Fernsehempfang oder andere elektrische oder elekronische Ger te zu reduzieren Solche Kabel und Stecker sind bei autorisierten IBM erh
41. nsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine 30 Unless specified otherwise IBM provides non IBM machines WITHOUT WARRANTIES OF ANY KIND Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for the Machine contact your reseller or IBM You may be required to present proof of purchase IBM or your reseller provides certain types of repair and exchange service either at your location or at a service center to keep Machines in or restore
42. nteret Undga at tilslutte eller frakoble dette produkt i tordenvejr Netledningen skal vaere tilsluttet en korrekt jordet stikkontakt med korrekt ledningsf ring Alt udstyr som tilsluttes dette produkt skal ogs v re tilsluttet korrekt jordede stikkontakter med korrekt ledningsf ring For at isolere sk rmen fra str mforsyningen skal stikket tages ud af stikkontakten Stikkontakten b r v re let tilg ngelig A FARE Slik unng r du fare for elektrisk st t Ikke ta av dekslene Ikke bruk produktet dersom sokkelen ikke er montert Ikke koble produktet til eller fra under tordenv r Pluggen p str mledningen m kobles til korrekt montert og jordet str muttak Utstyr som dette produktet eventuelt blir koblet til m ogs kobles til korrekt montert og jordet str muttak For isolere skjermen fra str mkilden m du ta ut pluggen fra stromuttaket Str muttaket b r v re lett tilgjengelig varning livsfara F r att undvika risk f r elektriska st tar m ste du t nka p f ljande Ta inte bort n gra skyddskapor Anv nd inte den h r produkten innan du har satt fast stativet Anslut inte produkten till ett eluttag under skv der Koppla inte heller ur produkten fr n ett eluttag under skv der Str mkabeln m ste anslutas till ett felfritt och jordat uttag All utrustning som den h r produkten kopplas till m ste ocks anslutas till felfria och jordade uttag IV For att bryta strommen till bi
43. ntos de configuraci n Para mayor informaci n consulte los manuales de su ordenador o sistema perativo o consulte a su administrador de sistema o proveedor Queste istruzioni utente per il setup coprono ambienti utente tipici messaggi su schermo possono variare a seconda del livello del proprio hardware e software In alcuni casi puo essere necessario modificare le procedure di setup Per maggiori informazioni fare riferimento ai manuali del proprio computer o del sistema operativo oppure consultare il proprio amministratore di sistema o il proprio rivenditore EI Me SIT NTG JR O ZNpANeER To avoid shock hazard Do not remove the covers Do not operate this product unless the stand is attached Do not connect or disconnect this product during an electrical storm The power cord
44. nty service will provide repair and exchange service for the Machine without charge under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine If a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded The replacement may not be new but will be in good working order Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARR
45. ontrols unlocked if held for 10 and submenus seconds Selects highlighted option Switches the monitor on or off gt m lock activated when Displays main OSD menu The image is already optimized for many display modes however the user controls can be used to adjust the image to your liking The settings are saved after adjustment and when exiting the OSD and will be effective thereafter CONTROLS LOCK UNLOCK This feature allows you to secure the current control settings so that they cannot be inadvertently changed Note This does not include brightness and contrast Push and hold the enter button lt for 10 seconds the message Controls Locked appears You can unlock the OSD controls at any time by pushing the enter button lt for 10 seconds the message Controls Unlocked will appear 16 On screen display OSD controls The LCD monitor takes up to 15 The settings which are adjustable with the user controls are accessed through the On screen minutes to become thermally stable after each time you switch Display OSD Press the enter button al to it on To make accurate adjustments display the main OSD menu wait until the monitor has warmed up Initial appearance of OSD main menu a K amp El gt lt m O aS Co H POSITION sub menu 17 Control and Description Sub menu s Adjustment WwW ES Adjusts Brightness BRIGHTNESS Adjusts Contrast CONTRAST The IMA
46. oot into Windows 95 or Windows 98 or Windows 2000 4 Your computer s Plug and Play code may warn you that your system hardware has changed This probably means that it has detected your new monitor for the first time 5 Open the DISPLAY PROPERTIES windows by clicking on START SETTINGS CONTROL PANEL and then double clicking on the DISPLAY icon 6 Select the SETTINGS tab 12 10 11 Select the CHANGE DISPLAY TYPE button Select the CHANGE MONITOR TYPE button Insert the Setup diskette into drive A and select the HAVE DISK button Choose the 9497 monitor and select OK gt the files will be copied from the diskette to your hard drive Close all open windows and remove the diskette Reboot the system The system will automatically select the maximum refresh rate and corresponding Color Matching Profile Auto Setup for Windows 3 1 Windows 95 Windows 98 or Windows 2000 or Windows NT 1 2 3 4 Turn on the monitor first then the computer If the message NO SIGNAL is displayed or if nothing is displayed check The video interface cable is connected properly The correct video adapter card is installed Video card is set for a mode within the operating range of your new monitor Wait approximately 15 minutes until the monitor warms up Insert the Flat Panel Monitor Installation Diskette into the diskette drive Check the operating system installed on your computer and follow the instructions from the table b
47. or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult an IBM authorized dealer or service representative for help Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Proper cables and connectors are available from IBM authorized dealers IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference 43 received including interference that may cause undesired operation This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Power Cord For your safety IBM provides a power cord with a grounded attachment plug to use with this IBM product To avoid electrical shock always use the power cord and plug with a properly grounded power outlet IBM power cords used in the United States and Canada are liste
48. pect of any default shall be limited to damages ITALY Limitation of Liability The following replaces the second sentence in the first paragraph In each such instance unless otherwise provided by mandatory law IBM is liable for no more than item 1 unchanged 2 as to any other actual damage arising in all situations involving non performance by IBM pursuant to or in any way related to the subject matter of this Statement of Warranty IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim 36 Applicability of suppliers and resellers unchanged The following replaces the second paragraph of this Section Unless otherwise provided by mandatory law IBM and your reseller are not liable for any of the following items 1 and 2 unchanged 3 indirect damages even if IBM or your reseller is informed of their possibility SOUTH AFRICA NAMIBIA BOTSWANA LESOTHO AND SWAZILAND Limitation of Liability The following is added to this Section IBM s entire liability to you for actual damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM TURKIYE Production Status The following replaces this Section IBM fulfills customer orders for IBM Machines as newly manufactured in accordance with IBM s production
49. s in the product s and or program s at any time It is possible that this publication may contain reference to or information about IBM products machines and programs programming or services that are not announced in your county Requests for copies of this publication and for technical information about IBM products should be made to your IBM Authorized Dealer or IBM Retailer No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from the International Business Machines Corporation Copyright International Business Machines Corporation 2000 All RIGHTS RESERVED Notices References in this publication to IBM products programs or services do not imply that IBM intends to make these available in countries in which IBM operates Any reference to an IBM product program or service is not intended to state or imply that only IBM s product program or service may be used Any functionally equivalent product program or service that does not infringe IBM s intellectual property rights or other legally protectable rights may be used instead of the IBM product program or service Evaluation and verification of operation in conjunction with other products programs or services except those expressly designated by IBM are the user s responsibility IBM may have patents or pending patent applications covering subject matter in this document The furnishing of t
50. uant to or in any way related to the subject of this Statement of Warranty IBM s liability will be limited to the charge paid by 33 you for the individual Machine that is the subject of the claim NEW ZEALAND The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides if you require the goods for the purposes of a business as defined in that Act Limitation of Liability The following is added to this Section Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees Act 1993 the limitations in this Section are subject to the limitations in that Act EUROPE MIDDLE EAST AFRICA EMEA The following terms apply to all EMEA countries The terms of this Statement of Warranty apply to Machines purchased from an IBM reseller If you purchased this Machine from IBM the terms and conditions of the applicable IBM agreement prevail over this warranty statement Warranty Service lf you purchased an IBM Machine in Austria Belgium Denmark Estonia Finland France Germany Greece Iceland Ireland Italy Latvia Lithuania Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland or United Kingdo
51. ubleshooting 6 If you encounter trouble with this product first check that the monitor is properly installed Can t find the 9497 Monitor on the Windows 95 or Windows 98 or Windows 2000 monitor lists You need to update the Windows 95 or Windows 98 or Windows 2000 setup information for your 9497 Monitor There is no picture on the screen Check Power saving mode Press any key or move the mouse to deactivate the mode Signal cable connector pins If there are bent or missing pins consult your place of purchase That the video mode selected is within the operating range of the monitor If the power indicator on the monitor bezel is green and flashing then the monitor has detected signals that are outside its operating range The picture is unstable Check Signal cable connector pins If there are bent or missing pins consult your place of purchase Graphics card Ensure a valid mode is selected Characters look too dark or too light Adjust Contrast or Brightness 25 The image has a few tiny dots that are not the same color as the surrounding area The Liquid Crystal Display LCD contains about 3 million Thin Film Transistors TFTs Asmall number of missing discolored or lighted dots may be present on the screen This is an intrinsic characteristic of TFT LCD technology and is not an LCD defect Need More Help If your problems remain after checking this manual please contact your reseller
52. y equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Any feature conversion or upgrade IBM or your reseller services must be installed on a Machine which is 1 for certain Machines the designated serial numbered Machine and 2 at an engineering change level compatible with the feature conversion or upgrade Many features conversions or upgrades involve the removal of parts and their return to IBM A part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your 40 facilities to permit them to fulfill their obligations and d inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machin
Download Pdf Manuals
Related Search