Home

IBM HH LTO User's Manual

1. Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for the Machine contact your reseller or IBM You may be required to present proof of purchase IBM or your reseller provides certain types of repair and exchange service either at your location or at a service center to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation IBM may repair the failing Machine or exchange it at its discretion When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Any feature conversion or upgrade IBM or your reseller services must be installed on a Machine which is 1 for certain Machines the designated serial numbered Machine and 2 at an engineering change level compatible with the feature conversion or upgrade Many fea
2. 5 8 in Length with bezel 221 mm 8 7 in Weight 2 9 Kg 2 Kg 4 4 Ib Input voltages Standard 5 V de and 12 V dc 5 Maximum sustained data transfer rates Uncompressed data 8 MB per second Operating environment Tape path temperature range 10 C to 35 C 50 F to 104 F Relative humidity 20 to 80 noncondensing Wet bulb 25 C 77 F maximum Altitude 152 m to 12 192 m 500 to 40 000 ft Temperature gradient 11 C 51 8 F per hour Humidity gradient 10 per hour O Copyright IBM Corp 2001 16 100 200 GB HH LTO Internal Tape Drive User s Guide Appendix D Troubleshooting The first step in problem solving is establishing whether the problem lies with the cartridge the drive the host computer and its connections the backup software or with the way the system is being operated If none of the following advice helps you solve the problem contact your supplier The computer does not restart after installation Possible reason Recommended action You have connected the tape drive to an existing SCSI bus that has other devices connected to it and the SCSI address of your drive is identical to the address used by another device Make sure that each device on the SCSI bus has a unique ID For best results connect the tape drive to a dedicated host bus adapter Do not connect the drive to a disk RAID controller You have installed an additional SCS
3. SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine Unless specified otherwise IBM provides non IBM machines WITHOUT WARRANTIES OF ANY KIND Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for the Machine contact your reseller or IBM In the United States call IBM at 1 800 772 2227 In Canada call IBM at 1 800 565 3344 In Toronto call 416 383 3344 You may be required to present proof of purchase IBM or your reseller provides certain types of repair and exchange service either at your location or at a service center to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation IBM may repair the failing Machine or exchange it at its discretion When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items a
4. 12 months charges apply for the Machine that is the subject of the claim This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OE OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC Appendix F Product warranty and notices 25 CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU IBM Statement of Warranty Worldwide except Canada Puerto Rico Turkey United States Part 1 General Terms This Statement of Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 may replace or modify those of Part 1 The warranties provided by IBM in this Statement of Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software pro
5. 2 1 NC 8 4 2 1 NC 8 4 2 1 ca ile ee i o o o fo o fo o ofo o o fo o o folfa o fa o o ojojo O O olo o o ololo lo o ojojo o 0 o ojojloj o Io 2 3 5 9 13 Installation and user s guide 3 SCSI connector H SCSI ID connector Power connector Note 1 When setting the SCSI ID use the jumpers that come with the tape drive 2 If your enclosure uses a remote SCSI ID switch remove the jumpers from the jumper pins on the tape drive and connect the remote switch 1 Set the SCSI ID a Locate the SCSI ID connector H b Decide on the SCSI ID number you want before you attach the SCSI bus cable to the host Make sure that the ID number you want is not already being used by another device c Find the jumper pin setting that corresponds to the SCSI ID number you choose then place jumper pins on the SCSI ID blocks as shown You can use a pair of flat nose pliers to place the jumpers on the jumper pins 2 Terminate the SCSI bus by adding the appropriate LVD or SE terminator to the last connector on the SCSI bus Step 4 Mounting the drive Mount the tape drive then attach the SCSI and power cables to it If there is insufficient working space to attach the connectors after mounting the drive attach the cables first To mount the drive follow these steps 1 Locate an available 5 25 inch bay or space in your computer to mount the tape drive Remove the cover plate from the bay selected Place the drive horizontally or v
6. Consumer Guarantees Act 1993 the limitations in this Section are subject to the limitations in that Act EUROPE MIDDLE EAST AFRICA EMEA The following terms apply to all EMEA countries Appendix F Product warranty and notices 29 30 The terms of this Statement of Warranty apply to Machines purchased from an IBM reseller If you purchased this Machine from IBM the terms and conditions of the applicable IBM agreement prevail over this warranty statement Warranty Service If you purchased an IBM Machine in Austria Belgium Denmark Estonia Finland France Germany Greece Iceland Ireland Italy Latvia Lithuania Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland or United Kingdom you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchased an IBM Personal Computer Machine in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Georgia Hungary Kazakhstan Kirghizia Federal Republic of Yugoslavia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia or Ukraine you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM The applicable laws Country unique terms and competent court for this Statement are
7. Error LED is flashing The drive mechanism has detected an error Power cycle or reset the drive If the condition clears load a new tape If the Drive Error LED remains on call for service The Tape Error LED is flashing Unload the tape cartridge Load a new cartridge D 8 p 8 8 If the Tape Error LED is now off discard the suspect tape cartridge Tf it is still on call for service The tape is ejected immediately and the Tape Error LED The tape cartridge memory CM might be faulty is flashing or the Drive Error LED flashes on unloading Write protect the cartridge by sliding the red switch on tape the tape cartridge The tape can be loaded and the data read Once the data is recovered the cartridge must be discarded Fault diagnosis If an error occurs with the tape drive follow these steps to eliminate possible causes Note After each step retry the backup operation If the backup still fails go on to the next step e Clean the tape drive e Retension the data cartridge e Replace the data cartridge e Go to the IBM support Web site at http www ibm com pc support Appendix D Troubleshooting 19 20 100 200 GB HH LTO Internal Tape Drive User s Guide Appendix E Help and service information This section contains information on how to obtain online and telephone technical support Online technical support Online technical support is available during the life of
8. by the Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded Limitation of Liability The following replaces items one and two of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence and 2 the amount of any other actual direct damages up to the greater of Irish Pounds 75 000 or 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim Applicability of suppliers and resellers unchanged The following paragraph is added at the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages ITALY Limitation of Liability The following replaces the second sentence in the first paragraph In each such instance unless otherwise provided by mandatory law IBM is liable for no more than item 1 unchanged 2 as to any other actual damage arising in all situations involving non performance by IBM pursuant to or in any way related to the subject matter of this Statement of Warranty IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim Applicability of suppliers and resellers unchanged The following replaces the second paragraph of this Section Unless ot
9. environments to provide reasonable protection against interference with licensed communication devices Union Europ enne Directive Conformit lectromagn tique Ce produit est conforme aux exigences de protection de la Directive 89 336 EEC du Conseil de l UE sur le rapprochement des lois des Etats membres en mati re de compatibilit lectromagn tique IBM ne peut accepter aucune responsabilit pour le manquement aux exigences de protection r sultant d une modification non recommand e du produit y compris l installation de cartes autres que les cartes IBM Ce produit a t test et il satisfait les conditions de l quipement informatique de Classe B en vertu de CISPR22 Standard europ en EN 55022 Les conditions pour l quipement de Classe B ont t d finies en fonction d un contexte r sidentiel ordinaire afin de fournir une protection raisonnable contre l interf rence d appareils de communication autoris s Unione Europea Directiva EMC Conformidad lectromagn tica Este producto satisface los requisitos de protecci n del Consejo de la UE Directiva 89 336 CEE en lo que a la legislatura de los Estados Miembros sobre compatibilidad electromagn tica se refiere IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer dichos requisitos de protecci n como resultado de una modificaci n no recomendada del producto incluyendo el ajuste de tarjetas de opci n que no sean IBM Este producto
10. remove the cartridge and then load it again If the tape cartridge is already loaded and you turn the power off then turn the power back on The tape cartridge will reload 5 The drive will pull in the cartridge and flash the green LED while loading Once loaded the green LED returns to a solid state Installation and user s guide 7 Unloading tape cartridges To unload a tape cartridge perform the following steps 1 Make sure that the 100 200 GB HH LTO Internal Tape Drive is turned on 2 Press the Unload button The drive rewinds the tape and places the tape cartridge in the unload position The status light will flash green while the tape rewinds and then turn off when the cartridge is ejected from the drive 3 After the tape cartridge has been ejected grasp the cartridge and remove it Emergency unload If a cartridge fails to eject using the normal unload procedure press and hold the Eject button for 5 seconds This will instruct the drive to perform an emergency unload 8 100 200 GB HH LTO Internal Tape Drive User s Guide Setting write protection on the cartridge The front of the cartridge has an orange write protect switch MM to prevent accidental erasure Slide the switch to the right to write protect H or to the left to enable writing Resetting the drive The reset procedure rewinds the tape and clears the buffer of previous tape drive commands and data To reset the tape drive i
11. reseller if approved by IBM to provide warranty service will provide repair and exchange service for the Machine without charge under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine If a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded The replacement may not be new but will be in good working order O Copyright IBM Corp 2001 23 24 Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES
12. the tape drive after startup or if you receive startup errors run the configuration setup utility program as described in the documentation that comes with your computer If all the indicators on either side of the tape drive blink in unison there is a problem with the tape drive Press the Unload button on the right side of the drive front panel to eject any tape that might be inserted and to reset the drive If the problem persists turn off the computer then turn it back on If the problem continues see Zi for further steps Step 9 Installing backup and restore software To use the drive you must install an appropriate backup and restore application for your computer operating system If you are using software not included in the option package follow the directions that come with your software If you are using the trial software that comes with the option insert a trial application CD into the CD ROM drive and follow the on screen installation and operating instructions If you are using the hardware installation support that your operating system provides and the operating system requests a device driver insert the User s Guide CD and look in the device driver folder Using the drive This illustration shows the front panel of the 100 200 GB LTO Internal Tape Drive i 3 Eject cartridge button Four LEDs H Emergency reset El Cartridge door 6 100 200 GB HH LTO Internal Tape Drive User s Guide F
13. this book the option package contains e IBM 100 200 GB HH LTO Internal Tape Drive e Mounting screws e Jumpers e Data cartridge e Backup application CDs trial versions e Cleaning cartridge e Device drivers on User s Guide CD e Mounting bracket Contact your place of purchase if an item is missing or damaged Be sure to retain your proof of purchase and packing material They might be required to receive warranty service Software description The IBM 100 200 GB HH LTO Internal Tape Drive includes trial version backup application CDs These CDs contain popular backup and restore applications for Microsoft Windows NT Novell NetWare and other operating systems You can install the application you choose for your computer system by following the installation instructions that come with the CD you select However these trial versions of the software expire after 30 to 90 days depending on the application you use You can use the trial period to determine the best application for your specific computer configuration For information on purchasing a permanent installation copy of the desired tape drive backup application go to the IBM tape drive Web site at http www ibm com pc us solutions accessories tapedrives html and follow the software links The CDs also contain backup applications that are used with other products but are not applicable to the 100 200 GB HH LTO Internal Tape Drive Supported tape drive configurations
14. those of the country in which the warranty service is being provided However the laws of Austria govern this Statement if the warranty service is provided in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Federal Republic of Yugoslavia Georgia Hungary Kazakhstan Kirghizia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia and Ukraine The following terms apply to the country specified EGYPT Limitation of Liability The following replaces item 2 in this Section 2 as to any other actual direct damages IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim Applicability of suppliers and resellers unchanged FRANCE Limitation of Liability The following replaces the second sentence of the first paragraph of this Section In such instances regardless of the basis on which you are entitled to claim damages from IBM IBM is liable for no more than items 1 and 2 unchanged GERMANY The IBM Warranty for Machines The following replaces the first sentence of the first paragraph of this Section The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the Machine s conformity to its Specifications The following paragraphs are added to this Section The minimum warranty period for Machines is six months In case IBM or your reseller are una
15. 0 200 GB HH LTO Internal Tape Drive User s Guide Appendix B Tape handling This section describes how to properly handle your tape cartridges to reduce wear on the 100 200 GB HH LTO Internal Tape Drive Tape handling and storage Most tapes are supplied in sealed cartridges Tapes are provided this way so that the tape will remain in a clean environment Opening the cartridge enables dirt and airborne particles to enter and contaminate the cartridge The cartridge must only be opened by the tape drive and not by an operator The tape is also held under proper tension inside the cartridge If the cartridge is dropped this tension is relaxed Inserting a dropped cartridge into a tape drive can often cause a misload that results in a jam The jam ruins the tape and can cause physical damage if the cartridge is not removed properly When you store tapes place them in their protective containers and store them on their ends Store the tapes in a clean dry area at normal room temperature and away from magnetic fields Environmental issues The operating environment might adversely affect tape drive operation The tape drive is designed to operate in a clean environment When tape is installed in a tape drive the clearance between the heads and the tape is measured in microns Even particles of smoke are larger than the space available between the tape and the heads Other environmental factors that adversely affect tape drive operation are dir
16. 100 200 GB HH LTO Internal Tape Drive User s Guide ail 100 200 GB HH LTO Internal Tape Drive User s Guide ail Note Before using this information and the product it supports be sure to read the information under Second Edition February 2001 Copyright International Business Machines Corporation 2001 All rights reserved US Government Users Restricted Rights Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp Contents Safety Read first About this book Registering your option Installation and user s guide Product description Software description Installation requirements Installing the drive Installing the drive in IBM servers General installation instructions Using the drive Appendix A Maintenance Caring for tape cartridges Cleaning cartridges Appendix B Tape handling Appendix C Product specifications Appendix D Troubleshooting Copyright IBM Corp 2001 VII vii DNNNNRAR md 11 oi EM 13 e 15 17 Post installation troubleshooting Fault diagnosis Appendix E Help and service information e Online technical support Telephone technical support Appendix F Product warranty and notices Warranty Statements IBM Statement of Limited Warranty fos United States Puerto Rico and Canada Part 1 General Terms IBM Statement of Warranty Worldwide except Cana
17. I and tape drive drivers are installed Consult the installation notes of the backup application for details Copyright IBM Corp 2001 17 The drive does not work Possible reason If the drive does not turn on the power cable might not be connected to the drive correctly Recommended action Make sure that the power cable is firmly connected Try another power cable If the power supply is present and all LEDs remain off try the reset button to power cycle the drive If this fails call for assistance If the self test fails there might be a hardware or firmware failure If there is a cartridge in the drive remove it Turn off the drive and turn it on again If the self test still fails call for assistance Post installation troubleshooting Remember that the system recognizes devices during start up If you swap or connect a product when your system is running you will need to restart the system Restarting the system will reset devices and will often resolve problems Restart the computer every time you add a driver or install firmware Understanding LEDs Your tape drive has four LEDs light emitting diodes on the front panel which indicate drive status These LEDs provide useful troubleshooting information The tape drive performs a power on self test whenever power is applied or the drive is reset The test takes about 5 seconds The green Ready light and the three amber lights for
18. I host bus adapter and its resources are conflicting with an existing adapter Remove the new host bus adapter and check the server documentation You have disconnected the power or SCSI cable from the computer start disk during the drive installation process Check that the cables to all devices are firmly connected The computer starts but does not recognize the tape drive Possible reason Recommended action The power or SCSI cable is not connected properly Check that the cables to the tape drive are firmly connected Ensure that the SCSI cable is LVD compliant and that it does not have any bent pins Replace if necessary The SCSI bus is not terminated correctly Check that the SCSI bus is actively terminated Refer to the documentation for your SCSI controller and any other SCSI devices you have The SCSI ID address of the tape drive is not unique Make sure that each device connected to the SCSI controller has a unique SCSI ID Remember that 7 is normally reserved for the host bus adapter The application does not recognize the tape drive Possible reason The application does not support the tape drive Recommended action Refer to your manufacturer s World Wide Web site for details of backup applications that support the Ultrium tape drive Load any service packs as necessary Some applications require drivers to be loaded Check that the correct SCS
19. NISRA IES CIE LUV Y RUE LO RAL Japanese statement of compliance for products less than or equal to 20 A per phase GE de E Vo 100 200 GB HH LTO Internal Tape Drive User s Guide Part Number 24P2397 Printed in the United States of America Gi on recycled paper containing 10 recovered post consumer fiber 1P P N 24P2397
20. S OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU 100 200 GB HH LTO Internal Tape Drive User s Guide Part 2 Worldwide Country Unique Terms ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other legislation and are only limited to the extent permitted by the applicable legislation Extent of Warranty The following replaces the first and second sentences of this Section The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment operation in other than the Specified Operating Environment improper maintenance by you or failure caused by a product for which IBM is not responsible Limitation of Liability The following is added to this Section Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 IBM s liability is limited to the repair or replacement of the goods or the supply of equivalent goods Where that condition or warranty relates to right to sell q
21. alleert eerst de veiligheidsvoorschriften Les sikkerhetsinformasjonen Safety Information for du installerer dette produktet Przed zainstalowaniem tego produktu nale y zapozna sie z ksi k Informacje dotycz ce bezpiecze stwa Safety Information Antes de instalar este produto leia as Informa es sobre Seguran a Mepeg ycTaHoBKo Mpo 1yKTa NpoYTUTE UHCTPyKuUMM No TexHUKe 6ezonacHocTn Pred in tal ciou tohto zariadenia si pe taje Bezpe nostn predpisy Pred namestitvijo tega proizvoda preberite Varnostne informacije Antes de instalar este producto lea la informaci n de seguridad L s s kerhetsinformationen innan du installerar den h r produkten Copyright IBM Corp 2001 V vi 100 200 GB HH LTO Internal Tape Drive User s Guide se vel qui ju y a About this book This guide contains information on the IBM 100 200 GB HH LTO Internal Tape Drive It is translated into the following languages e English e French e Spanish e Italian Brazilian Portuguese e Traditional Chinese e Japanese The guide is divided into two parts Part 1 Installation and maintenance guide This section contains the product description installation and operating instructions Part 2 Appendixes This section contains maintenance tape handling product specifications troubleshooting help and service and warranty and notice information Be sure to retain your proof of purchase It
22. ble to repair an IBM Machine you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded Extent of Warranty The second paragraph does not apply 100 200 GB HH LTO Internal Tape Drive User s Guide Warranty Service The following is added to this Section During the warranty period transportation for delivery of the failing Machine to IBM will be at IBM s expense Production Status The following paragraph replaces this Section Each Machine is newly manufactured It may incorporate in addition to new parts re used parts as well Limitation of Liability The following is added to this Section The limitations and exclusions specified in the Statement of Warranty will not apply to damages caused by IBM with fraud or gross negligence and for express warranty In item 2 replace U S 100 000 with 1 000 000 DEM The following sentence is added to the end of the first paragraph of item 2 IBM s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence IRELAND Extent of Warranty The following is added to this Section Except as expressly provided in these terms and conditions all statutory conditions including all warranties implied but without prejudice to the generality of the foregoing all warranties implied
23. can be found on the IBM Server Compatibility Web page at http www ibm com pc compat 1 GB equals approximately 1 000 000 000 bytes O Copyright IBM Corp 2001 1 Installation requirements To install this drive you must have the following e A dedicated low voltage differential Ultra2 or a single ended SE SCSI host adaptor Documentation for your computer SCSI bus adapter or external enclosure e An Ultra2 LVD active terminator if you are installing the tape drive at the end of an Ultra LVD SCSI device chain or an SE active terminator if you are installing the tape drive at the end of an SE SCSI device chain e Phillips and flat blade screwdrivers for the mounting screws and for opening your computer e Flat nose pliers optional to install and remove jumpers e An available 5 25 inch half high drive bay e Supported operating system Windows NT Windows 2000 Netware or Linux e Supported backup software Veritas Backup Exec or CA AverServeit Installing the drive This section contains information on installing the tape drive in IBM servers and in other computers Installing the drive in IBM servers The IBM 100 200 GB HH LTO Internal Tape Drive can be installed in IBM xSeries 200 220 230 240 340 as well as IBM Netfinity 4500R 5100 5600 7100 and 7600 It can also be installed externally via a 3551001 or a 3510020 to IBM xSeries 330 or Netfinity 6000R or 8500R Refer to the documentation that comes
24. cument does not give you any license to these patents You can send license inquiries in writing to IBM Director of Licensing IBM Corporation North Castle Drive 100 200 GB HH LTO Internal Tape Drive User s Guide Trademarks Armonk NY 10504 1785 U S A The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Some states do not allow disclaimer of express or implied warranties in certain transactions therefore this statement may not apply to you This information could include technical inaccuracies or typographical errors Changes are periodically made to the information herein these changes will be incorporated in new editions of the publication IBM may make improvements and or changes in the product s and or the program s described in this publication at any time without notice IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you Any references in this publication to non IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites The materials at tho
25. da Puerto Rico Turkey United States an 1 General Terms Part 2 Worldwide Country Unique Time Trademarks Federal Communications Comim i sion FCC statement 18 19 21 21 21 23 28 23 26 29 33 33 iii iv 100 200 GB HH LTO Internal Tape Drive User s Guide Safety Read first Before installing this product read the Safety Information Wp A co del A CN a Antes de instalar este produto leia as Informa es de Seguran a FTCA ZA ATARE Safety Information 24448 Prije instalacije ovog produkta obavezno pro itajte Sigurnosne Upute P ed instalac tohoto produktu si p e t te p ru ku bezpe nostn ch instrukc L s sikkerhedsforskrifterne f r du installerer dette produkt Ennen kuin asennat t m n tuotteen lue turvaohjeet kohdasta Safety Information Avant d installer ce produit lisez les consignes de s curit Vor der Installation dieses Produkts die Sicherheitshinweise lesen Mpiv eykataot oete To mpoidv aut a ote Tic MANPO opies aop sia safety information T1027 11810 NX 1878 07 1319 Wpnnw 797 A term k telep t se el tt olvassa el a Biztons gi el r sokat Prima di installare questo prodotto leggere le Informazioni sulla Sicurezza REDCOON KERRE BA lt ES M3S 2702 Ad Ca ASS HOMO ot TIpea a ce HHCTAJIMPA OBO NPOAyKT IpoxwHTajTe HHPopmarnajara 3a Oe30enmocr Lees voordat u dit product inst
26. e all such information from the Machine prior to its return Production Status Each IBM Machine is manufactured from new parts or new and used parts In some cases the Machine may not be new and may have been previously installed Regardless of the Machine s production status IBM s appropriate warranty terms apply Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim IBM is liable for no more than 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages up to the greater of U S 100 000 or equivalent in local currency or the charges if recurring 12 months charges apply for the Machine that is the subject of the claim This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OE OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGE
27. e tape access door of the cartridge or touch the tape itself e Keep your cartridges away from sources of electromagnetic fields such as telephones dictation equipment mechanical or printing calculators motors and bulk erasers Do not place the cartridges on the computer monitor or on the base unit of the computer e Keep cartridges away from direct sunlight and heat sources such as radiators or warm air ducts e Keep cartridges free of moisture Do not wet or submerge cartridges in any liquid e Do not expose cartridges to temperature extremes Cleaning cartridges You must use Ultrium cleaning cartridges with Ultrium tape drives as other cleaning cartridges will not load and run A cleaning cartridge is supplied with each tape drive and should only be used when the Use Cleaning Cartridge amber LED is flashing Insert the cleaning cartridge and the drive will carry out its cleaning cycle and eject the cartridge on completion which can take up to 5 minutes During the cleaning cycle the amber Use Cleaning Cartridge LED will light solidly and the green Ready LED will flash Each cleaning cartridge can be used up to 15 times If the cleaning cartridge is ejected immediately with the Tape Error LED on it has expired New cleaning cartridges are available from your supplier and can be ordered following the insert card instructions that come with the cleaning cartridge Copyright IBM Corp 2001 11 12 10
28. ence to radio communications However there is no guarantee that interference will not occur in a particular installation If this Appendix F Product warranty and notices 33 34 equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult an IBM authorized dealer or service representative for help Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Proper cables and connectors are available from IBM authorized dealers IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible party In
29. entation that comes with your computer or SCSI adapter for information on how to view configuration information e Use SCSI adapter utility programs if available e Inspect the installed SCSI devices to see how the jumpers that determine the IDs are set Step 2 Preparing for installation To prepare for installation 1 Unpack the tape drive and store the packaging You will need the packaging if you return the drive for service 2 If you are installing the drive in an external storage enclosure turn off the enclosure 3 Turn off all attached devices 4 Turn off the computer 5 Disconnect all cables from the computer and all attached devices then open the computer For specific information on opening your computer refer to the documentation that comes with your computer Attention Tape drives are sensitive to static electricity discharge The drive is wrapped in a static protective bag to prevent damage 6 Before opening the static protective bag containing the tape drive touch the bag to an unpainted metal surface on the computer for at least two seconds Remove the drive from the static protective bag If you must put the drive down place the drive on the static protective bag Do not touch any exposed components of the tape drive Instead handle it carefully by the edges Step 3 Setting the SCSI ID Refer to the following diagram when setting the SCSI ID NC 8 4 2 1 NC 8 4 2 1 NC 8 4
30. ertically 2 Attach mounting hardware to drive if applicable 3 Align the drive bay screw holes with the threaded holes in the drive housing When you mount the tape drive follow these guidelines e Ensure that no objects such as screw heads cables or adjacent devices are pressing against the frame e Ensure that nothing blocks the ventilation slots on the bottom and rear of the tape drive Attention Use only the screws that come with the tape drive Other screws might be too long and can cause damage to the drive 4 Insert a screw through each of the drive bay holes into the threaded holes in the drive and tighten the screws with a screwdriver 4 100 200 GB HH LTO Internal Tape Drive User s Guide Step 5 Attaching cables To attach the SCSI and power cables to the tape drive 1 Locate the SCSI cable on your computer a 68 pin ribbon cable with one end connected to the SCSI adapter and find the next available connector that is farthest from the adapter Use all empty bus connectors beginning with the one farthest from the adapter to ensure better signal quality Note The SCSI adapter might be part of the computer system board or might be an adapter installed in an expansion slot 2 Attach the SCSI cable from your computer to the tape drive 68 pin SCSI connector BY The SCSI cable connector at the end of the SCSI cable will attach to the drive only one way Do not force the cable onto the d
31. grams whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Warranty affects any statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller Machine 100 200 GB HH LTO Internal Tape Drive Warranty period Three years Contact your place of purchase for warranty service information Some IBM Machines are eligible for on site warranty service depending on the country where service is performed The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise During the warranty period IBM or your reseller if approved by IBM to provide warranty service will provide repair and exchange service for the Machine without charge under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine If a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do
32. ha sido probado y satisface los l mites para Equipos Inform ticos Clase B de conformidad con el Est ndar CISPR22 y el Est ndar Europeo EN 55022 Los l mites para los equipos de Clase B se han establecido para entornos residenciales t picos a fin de proporcionar una protecci n razonable contra las interferencias con dispositivos de comunicaci n licenciados Union Europea Normativa EMC Questo prodotto e conforme alle normative di protezione ai sensi della Direttiva del Consiglio dell Unione Europea 89 336 CEE sull armonizzazione legislativa degli stati membri in materia di compatibilit elettromagnetica IBM non accetta responsabilit alcuna per la mancata conformit alle normative di protezione dovuta a modifiche non consigliate al prodotto compresa l installazione di schede e componenti di marca diversa da IBM Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del CISPR 22 Norma Europea EN 55022 I limiti delle apparecchiature della Classe B sono Appendix F Product warranty and notices 35 36 stati stabiliti al fine di fornire ragionevole protezione da interferenze mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici Korean Ba 14 SEM ol AAS SUSLHS ESOO EE Hol AES cai TOREJ Te UE ESE REEAit V ESA BIE ECT CORE FERET LEI CORE DI 67 LEYS SE ec SBS esl eHRCTCEMHBVET
33. herwise provided by mandatory law IBM and your reseller are not liable for any of the following items 1 and 2 unchanged 3 indirect damages even if IBM or your reseller is informed of their possibility Appendix F Product warranty and notices 31 32 SOUTH AFRICA NAMIBIA BOTSWANA LESOTHO AND SWAZILAND Limitation of Liability The following is added to this Section IBM s entire liability to you for actual damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM TURKIYE Production Status The following replaces this Section IBM fulfills customer orders for IBM Machines as newly manufactured in accordance with IBM s production standards UNITED KINGDOM Limitation of Liability The following replaces items 1 and 2 of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence 2 the amount of any other actual direct damages or loss up to the greater of Pounds Sterling 150 000 or 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim The following item is added to this paragraph 3 breach of IBM s obligations implied by Section 12 of the Sale of G
34. might be required for warranty service Note The illustrations in this manual might be slightly different from your hardware Registering your option Thank you for purchasing OPTIONS by IBM Please take a few moments to register your product and provide us with information that will help IBM to better serve you in the future Your feedback is valuable to us in developing products and services that are important to you as well as in developing better ways to communicate with you Register your option on the IBM Web site at http www ibm com pc register IBM will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information O Copyright IBM Corp 2001 vii Viii 100 200 GB HH LTO Internal Tape Drive User s Guide Installation and user s guide This guide contains product description hardware and software installation instructions and product use Product description The IBM 100 200 GB HH LTO Internal Tape Drive is a fast wide Ultra2 low voltage differential SCSI tape drive for backing up and restoring data and archiving files These files can include multimedia imaging transaction processing large databases and other storage intensive applications Each tape cartridge can store up to 100 GB of data uncompressed or up to 200 GB of data compressed assuming a 2 1 compression ratio In addition to
35. nsert a paper clip into the emergency reset button on the front of the device or turn the computer off and back on again When reset all front LEDs turn on and then off with the top green LED remaining on to indicate a ready condition If you reset the tape drive while a cartridge is loaded the tape rewinds to the beginning The reset might take as long as 2 minutes if the tape is positioned near the end After the drive has been reset tape operation starts from the beginning of the data cartridge After resetting the drive restart your backup tape software Packing the drive for shipping Attention To avoid damaging the tape drive use the original shipping materials when you ship it Your proof of ees might be required to receive warranty service If you are returning the tape drive for service remove and eep all cartridges cables and terminators If you are shipping the tape drive to another location or returning it for repair pack the tape drive in its original shipping container and packing materials Installation and user s guide 9 10 100 200 GB HH LTO Internal Tape Drive User s Guide Appendix A Maintenance You need to perform regular maintenance on your 100 200 GB HH LTO Internal Tape Drive This section explains how to care for the tape cartridges and how to clean the drive head Caring for tape cartridges The following points are guidelines for storing and using the cartridges e Do not open th
36. oods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982 Applicability of suppliers and resellers unchanged The following is added to the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default will be limited to damages NORTH AMERICA CANADA Warranty Service The following is added to this section To obtain warranty service from IBM call 1 800 565 3344 In Toronto call 416 383 3344 UNITED STATES OF AMERICA Warranty Service The following is added to this section To obtain warranty service from IBM call 1 800 772 2227 This publication was developed for products and services offered in the U S A IBM may not offer the products services or features discussed in this document in other countries Consult your local IBM representative for information on the products and services currently available in your area Any reference to an IBM product program or service is not intended to state or imply that only that IBM product program or service may be used Any functionally equivalent product program or service that does not infringe any IBM intellectual property right may be used instead However it is the user s responsibility to evaluate and verify the operation of any non IBM product program or service IBM may have patents or pending patent applications covering subject matter described in this document The furnishing of this do
37. re genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Any feature conversion or upgrade IBM or your reseller services must be installed on a Machine which is 1 for certain Machines the designated serial numbered Machine and 2 at an engineering change level compatible with the feature conversion or upgrade Many features conversions or upgrades involve the 100 200 GB HH LTO Internal Tape Drive User s Guide removal of parts and their return to IBM A part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your facilities to permit them
38. rive Attention Do not force the power cable into the tape drive power connector If the power cable is upside down and you force the connection you might damage the drive 3 Connect the power cable connector H to the four pin connector on the tape drive as shown in the illustration If all the power cables are in use purchase a dc Y splitter cable which is available at most electronics stores Split a cable to make a connection available for the tape drive Step 6 Completing the installation Check your work before closing the computer 1 Be sure that the power and SCSI connectors are securely attached Be sure that the cables are neatly routed Installation and user s guide 5 2 Replace the computer cover and secure it in place Reconnect the power cords and cables Step 7 Turning on the device Turn on all attached devices then turn on your computer The tape drive performs a power on self test POST within 15 seconds and then performs a drive reset Step 8 Updating the configuration For most computers the configuration setup utility program automatically recognizes the new tape drive However you might have to provide information about your system changes after you restart your computer Ensure that the appropriate advanced SCSI programming interface ASPI device drivers are installed to support the tape drive Device drivers are usually provided with the SCSI adapter If your computer does not recognize
39. ront Panel LEDs The following table describes the LED light emitting diode indicators on the drive front panel Indicator activity Meaning Ready top green On the tape drive is ready for use Off the drive power is off or there was a failure during self test Flashing the drive is busy Drive Error second amber Off no fault has been detected Flashing a problem has occurred with the drive hardware Tape Error third amber Off no fault has been detected Flashing the tape currently in the drive is faulty This LED could come on for a number of reasons but they all relate to a problem with the tape such as unreadable cartridge memory or unsupported tape Do not use the cartridge replace it The LED will go out when a tape load is started Use Cleaning Cartridge bottom amber On cleaning cartridge is being used Off the drive does not require cleaning Flashing the drive needs cleaning Loading tape cartridges To load a tape cartridge refer to the following diagram and perform the following steps 1 Make sure the tape drive is turned on Make sure the write protection switch on the tape cartridge is properly set 2 3 Grasp the tape cartridge so that the write protect switch faces you 4 Slide the tape cartridge into the tape load compartment Note If the tape cartridge is already in the unload position partially ejected and you want to reload it
40. s of Part 2 may replace or modify those of Part 1 The warranties provided by IBM in this Statement of Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Warranty affects any statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller Machine 100 200 GB HH LTO Internal Tape Drive Warranty period Three years Contact your place of purchase for warranty service information Some IBM Machines are eligible for on site warranty service depending on the country where service is performed The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise During the warranty period IBM or your
41. se Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk Any performance data contained herein was determined in a controlled environment Therefore the result obtained in other operating environments may vary significantly Some measurements may have been made on development level systems and there is no guarantee that these measurements will be the same on generally available systems Furthermore some measurements may have been estimated through extrapolation Actual results may vary Users of this document should verify the applicable data for their specific environment The following terms are trademarks of the IBM Corporation in the United States or other countries or both IBM HelpCenter Netfinity Microsoft Windows and Windows NT are trademarks of the Microsoft Corporation in the United States other countries or both Other company product and service names may be trademarks or service marks of others Federal Communications Commission FCC statement Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interfer
42. so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded The replacement may not be new but will be in good working order Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels 26 100 200 GB HH LTO Internal Tape Drive User s Guide THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine Unless specified otherwise IBM provides non IBM machines WITHOUT WARRANTIES OF ANY KIND
43. t dust fibers and airborne particles Ensure that you operate in a clean environment Tape drive cleaning Even if the operating environment is clean dirt might build up on the heads of any tape drive Every time tape motion occurs some of the media surface comes off on the heads Over time this material builds up causing the tape head clearance to increase The increased tape head clearance produces reading and writing errors Most tape drives today have a built in cleaning indicator to notify you when the tape needs cleaning Do not use any non LTO cleaning cartridges with these tape drives You can use cleaning cartridges only for a limited number of times A cleaning cartridge is expired after it has been used for the maximum number of times as indicated When a cleaning cartridge is expired you must replace it Never reuse an expired cleaning cartridge If you continue to use an expired cleaning cartridge you might reintroduce dirt to the tape drive and you might not clean the drive To make sure that you know when your cleaning cartridge expires make a notation on the cleaning cartridge each time you clean the tape drive Copyright IBM Corp 2001 13 14 100 200 GB HH LTO Internal Tape Drive User s Guide Appendix C Product specifications This appendix includes the product specifications and requirements Physical specifications Height with bezel 41 45 mm 1 625 in Width with bezel 148 mm
44. ternational Business Machines Corporation New Orchard Road Armonk NY 10504 Telephone 1 919 543 2193 Tested To Comply C With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES 003 Avis de conformite a la reglementation d Industrie Canada Cet appareil num rique de classe B est conforme la norme NMB 003 du Canada Deutsche EMV Direktive electromagnetische Vertraglichkeit Dieses Ger t ist berechtigt in Ubereinstimmung mit dem deutschen EMVG vom 9 Nov 92 das EG Konformit tszeichen zu f hren Der Aussteller der Konformit tserkl rung ist die IBM UK Greenock Dieses Ger t erf llt die Bedingungen der EN 55022 Klasse B European Union emission directive This product is in conformity with the protection requirements of EU Council Directive 89 366 ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility 100 200 GB HH LTO Internal Tape Drive User s Guide IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non recommended modification of the product including the fitting of non IBM option cards This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22 European Standard EN 55022 The limits for Class B equipment were derived for typical residential
45. the other LEDs flash briefly and then go out The green Ready LED flashes and then remains on if the drive passes the self test If the self test fails the Drive Error and Tape Error LEDs flash while the Ready and Use Cleaning Cartridge LEDs are off This continues until the drive is reset Use the following table to interpret the LED sequences and the appropriate action to take Symptom Drive fails to execute power on self test LEDs remain off Action Check power is being supplied to the drive Try another power connector If the power supply is present and all LEDs remain off call for service Drive fails to execute power on self test The Drive Error and Tape Error LEDs flash while the Ready and Use Cleaning Cartridge LEDs are off Unload the tape cartridge Power cycle or reset the drive Use the end of a paperclip to press the Reset button on the front of the tape drive If the condition clears load a new tape and discard the suspect tape cartridge If the error condition reappears call for service The Use Cleaning Tape LED is flashing The drive requires cleaning Load the cleaning cartridge The cleaning cartridge is ejected immediately after loading and the Tape Error LED is flashing Make sure that you are using a cleaning cartridge that has been used fewer than 15 times 18 100 200 GB HH LTO Internal Tape Drive User s Guide Symptom Action The Drive
46. to fulfill their obligations and d inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Production Status Each IBM Machine is manufactured from new parts or new and used parts In some cases the Machine may not be new and may have been previously installed Regardless of the Machine s production status IBM s appropriate warranty terms apply Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim IBM is liable for no more than 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages up to the greater of U S 100 000 or equivalent in local currency or the charges if recurring
47. tures conversions or upgrades involve the removal of parts and their return to IBM A part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange Appendix F Product warranty and notices 27 28 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your facilities to permit them to fulfill their obligations and d inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remov
48. uiet possession or clear title or the goods are of a kind ordinarily acquired for personal domestic or household use or consumption then none of the limitations in this paragraph apply PEOPLE S REPUBLIC OF CHINA Governing Law The following is added to this Statement The laws of the State of New York govern this Statement INDIA Limitation of Liability The following replaces items 1 and 2 of this Section 1 liability for bodily injury including death or damage to real property and tangible personal property will be limited to that caused by IBM s negligence 2 as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to or in any way related to the subject of this Statement of Warranty IBM s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim NEW ZEALAND The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides if you require the goods for the purposes of a business as defined in that Act Limitation of Liability The following is added to this Section Where Machines are not acquired for the purposes of a business as defined in the
49. upport telephone number and support hours by country refer to the following table or to the enclosed technical support insert If the number is not provided contact your IBM reseller or IBM marketing representative Response time may vary depending on the number and nature of the calls received Support 24 hours a day 7 days a week Canada Toronto only 416 383 3344 Canada all other 1 800 565 3344 Copyright IBM Corp 2001 21 U S A and Puerto Rico 1 800 772 2227 All other countries Go to http www ibm com pc support and click HelpCenter Phone List 22 100 200 GB HH LTO Internal Tape Drive User s Guide Appendix F Product warranty and notices Warranty Statements The warranty statements consist of two parts Part 1 and Part 2 Part 1 varies by country Part 2 is the same for both statements Be sure to read both the Part 1 that applies to your country and Part 2 e United States Puerto Rico and Canada Z125 4753 05 11 97 Part 1 General Terms on page 23 e Worldwide except Canada Puerto Rico Turkey and United States Z125 5697 01 11 97 Part 1 General Terms on page R6 e Worldwide Country Unique Terms Part 2 Country Unique Terms on page bg IBM Statement Canada Part 1 of Limited Warranty for United States Puerto Rico and General Terms This Statement of Warranty includes Part 1 General Terms and Part 2 Country unique Terms The term
50. with the server for instructions on installing the tape drive General installation instructions Follow these steps to install the tape drive in other computers Step 1 Selecting a SCSI ID Each device on a SCSI bus must have a unique SCSI ID You can select a SCSI ID from 0 to 6 for the tape drive The SCSI ID must be supported by your SCSI adapter Refer to your SCSI adapter documentation for the range and relative priority of the IDs supported The tape drive is shipped with the SCSI ID preset to 3 Follow these guidelines to select a SCSI ID e Assign the tape drive to one of the higher priority IDs available 0 6 e Assign the lower priority ID numbers 8 15 to those devices that are most often used or are faster than other devices in the chain e Do not assign an ID of 7 because this is usually used as the SCSI adapter ID Depending on your computer there are several ways to view your current SCSI ID settings 2 This tape drive can be installed on a single ended SE SCSI device chain but doing so might limit the performance of the drive 3 SCSI termination might be provided with your computer or SCSI adapter Refer to the documentation that comes with your computer or SCSI adapter for more information 2 100 200 GB HH LTO Internal Tape Drive User s Guide e For many IBM computers press F1 during the startup after the memory check completes Other adapters show SCSI settings when you press Ctrl A Check the docum
51. your product Online assistance can be obtained through the Personal Computing Support Web site and the IBM Automated Fax System Online technical support IBM Personal Computing Support Web site http www ibm com pc support IBM Automated Fax System 1 800 426 3395 U S and Canada During the warranty period assistance for replacement or exchange of defective components is available In addition if your IBM option is installed in an IBM computer you might be entitled to service at your location Your technical support representative can help you determine the best alternative Telephone technical support Installation and configuration support through the HelpCenter will be withdrawn or made available for a fee at IBM s discretion 90 days after the option has been withdrawn from marketing Additional support offerings including step by step installation assistance are available for a nominal fee To assist the technical support representative have available as much of the following information as possible e Option name e Option number e Proof of purchase e Computer manufacturer model serial number if IBM and manual e Exact wording of the error message if any e Description of the problem e Hardware and software configuration information for your system If possible be at your computer Your technical support representative might want to walk you through the problem during the call For the s

IBM HH LTO User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents