HP T250 User's Manual
Contents
1. 1250 Digital Camcorder Quick Start Guide 1 Getting Started All information presented is as accurate as possible but is subject to change without notice There is no guarantee for the accuracy of the contents in this guide We reserve the right to change any content or technical rule without prior notification For more details about the camcorder operation and troubleshooting please read the User Manual located on the CDROM disc included with your camcorder or visit http www hp com support 1 1 Inserting SD Card s 1 Open the battery cover 2 Insert the SD card gently into the slot Make sure the copper contact faces upwards SD card 1 SD SDHC card SD card 2 Micro SD card Note To avoid damage to the camcorder and memory cards DO NOT insert while powered up Damage to the memory card will result in loss of video and photos 1 2 Loading the Battery ONLY use the provided battery or manufacturer recommended battery with this camcorder Note Insert the battery correctly according to this description Failure to due this could result in damage to this camcorder and rare cases result in fire 1 Open the battery cover 2 Insert the battery according to the illustration Be sure to have the battery terminal contacts match with the camcorder 3 Close the battery cover Battery full Battery half full Battery empty e Charging battery A new battery should be charged at le2. select the file and press Recording Button 13 3 Pressing the Zoom Button J or touching the screen to select the Zoom icons M E will zoom in or zoom out the picture Press the Mode Button O O or touch the screen to select the 4 way icons to move the image 4 Press Zoom Button E or touch the Return Button EEE to return to full screen for viewing photos 5 Press the Playback Button E select the Return Button EEE will restore to DSC capture mode 14 3 PC and TV Connection 3 1 Connecting to the Computer As shown in the illustration below use the USB cable provided to connect the camcorder to a PC for file transmission 3 2 Connecting to a Standard TV As shown in the illustrations below either use the provided HDMI cable to connect to a HD TV or the video cable to connect to a standard TV Standard TV Connection 15 4 Troubleshooting Cannot power on the Camcorder Camera shutdown suddenly Photos are not stored in the memory No sound in PC video playback Camera shutdown when using Self timer shooting picture Images are out of focus 16 Battery is not inserted correctly Battery is exhausted Power saving mode already activated Battery exhausted The camcorder was Powered off before it completed storing the images Video file is not supported with Windows Media Player Battery exhausted Object exceeds th
3. ast 4 hours e The device power is supplied by DC input No battery inside 1 3 Charging the Battery Use the AC adaptor to charge the lithium battery whether the camcorder is on or off Connect the camcorder to the cable of the AC adaptor The camcorder battery can be charge by PC or laptop via USB port when powered off External View 3 4 1 4 Buttons Functions Description Button Power in Press the button to turn ON OFF Button SY the power Menu ee Press the button to display the Button O main OSD menu Press MODE to access different the 3 mode of Video Photo and LIGHT Voice recording Button Press LIGHT to turn ON OFF the 8 g Q Q gt LED light in front of the camcorder LIGHT MODE In MENU and PLAY BACK MODE modes these buttons can be used Button for selection of the relevant functions LIGHT is for left and MODE is for right This camcorder is equipped with 5X optical zoom and 4X digital zoom function Please note that the Zoom 4X digital zoom is supported in Button lil 720P or lower video resolutions The T and W buttons can be used for function selection in the mode of MENU Press the start stop button o begin stop video recording take a Button photo or to start stop voice gt recording Recording Press the Playback button to enter Playback mode and playback the last file Playbac
4. e range of focus or camcorder was not still during recording 1 Please insert battery correctly 2 Recharge the Battery 1 Please turn on the power again 2 Recharge the Battery Be sure the Battery is charged and do not power off the camcorder until 5 seconds after a video of photo is recorded Use Apple QuickTime or ArcSoft TotalMedia Theatre for PC playback Recharge the Battery Keep subjects within range and reduce camcorder movement 1 Unlock the memory Memory card is card Protected 2 Reformat the Memory card memory card Unable to use the contains non DCF Please make sure external memory images taken by to backup the file card other cameras before reformatting Memory card type memory card or format not 3 Use only SD supported SDHC or micro SD memory cards Short circuit All Buttons can not occurred when Remove the Battery work or camera connecting the and re insert after 10 hangs camera to other seconds device Battery power was okay when the camcorder was new but now lasts only a few minutes Rechargeable Replace the NP 60 Batteries do wear battery with same out after a year or type mAh rating longer 1050 and 1700 17
5. en icons ME MIM 3 Press Playback Button E select the Return Button EEN the digital video camera will return to recording mode 10 4 You can also playback the video clips at different speeds by touching the screen icons and MES To playback in slower speeds touch the ES icon to select ON OFF then touch the E and MESS icons to vary the speed Review the table below for details Playback speed is as below when the Playback speed is as below when the Slow Motion is OFF Slow Motion is ON Rewind 2X play Forward Rewind 1 2X play Forward Rewind 4X play Forward Rewind 1 4X play Forward Rewind 8X play Forward Rewind 1 8X play Forward Rewind 16X play Forward Rewind 1 16Xplay Forward 11 2 3 Shooting Playback Photos 2 3 1 Taking a picture 1 Turn on the camcorder Press the Mode Button O or touch the screen to select the DSC Mode icon to switch to DSC Mode DSC Mode icon 2 Press the Recording Button 1 half way to display the auto focus bracket Wait for the bracket to green which indicates the auto focus is ready and then press the Recording Button i fully to capture the photo The camcorder will store the picture automatically 12 2 3 2 Photo Playback 1 In DSC Mode press Playback Button or touch the Playback icon to display the images on the LCD screen Playback 2 Touch the file thumbnail or press the Zoom Button LIL I to u
6. k Button 1 5 Initial settings before use 1 5 1 Setting Date and Time 1 Power on the camcorder to set up the date and time for the initial use Set the date and time by touching the screen to select the field to be modified and touch the up or down arrow icons to change the value as illustrated below 2 Press Recording Button 1 to store your changes 3 Touch the EEE icon to exit the settings menu 2 Using the Camcorder 2 1 Recording a Video Clip 1 Power on the camcorder by opening the LCD panel or pressing the power button Press the Mode Button O gt or touch the DV Mode icon on the LCD screen to switch to DV mode DV Mode Icon Note It is recommended to use a 4 GB or greater SD SDHC memory card for video recording 2 2 Video Clip Voice Clip Playback Note Video Photos and Audios may not play back on the camcorder if 1 The folder file name has been changed on your computer 2 Ifthe file has been edited processed on a computer or captured with another camcorder camera 1 In DV Voice Recording Mode pressing the Playback Button 3 or touching the Playback Mode icon on the LCD Playback Mode icon 2 Recorded files will appear as thumbnails as illustrated below Touch the desired mode icon DV DSC or Audio Touch the thumbnail or use the Zoom Button LIL to select the file 2 To Playback or pause the file press the Recording Button i or touch the scre
Download Pdf Manuals
Related Search