HP Server tc2100 Installation Instructions
Contents
1. DIMM Installation Instructions Copyright 2009 Hewlett Packard Development Company L P The information contained herein is subject to change without notice The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services Nothing herein should be construed as constituting an additional warranty HP shall not be liable for technical or editorial errors or omissions contained herein Part Number 284399 002 March 2009 First Edition Installation Guidelines Some computers are equipped with an Advanced Memory Protection feature that enables the addition or replacement of memory while the computer is running If your computer is equipped with this feature see the documentation supplied with the computer for memory installation replacement and configuration procedures We IMPORTANT This computer may not support mixing RDIMMs and UDIMMs Attempting to mix these two types can cause the computer to halt during BIOS initialization For more information see the computer product documentation Installing a DIMM AN WARNING Turn off the computer and disconnect the power cord from the computer before installing the DIMM Failure to do so can damage the equipment and expose you to the risk of electric shock To reduce the risk of personal injury allow the DIMMs to cool before removing them IN WARNING Always comply with all electrostatic and thermal guidel2. ines to prevent bodily injury and ensure a properly functioning system when performing hot plug operations 1 Back up all data power down the computer and then disconnect the computer from all electrical outlets 2 Access the DIMM slots See the computer specitic documentation Use a nonmagnetic tip screwdriver to remove any screws 3 Open the DIMM slot latches AN CAUTION DIMMs are keyed for proper alignment Align notches in the DIMM with the corresponding notches in the DIMM slot before inserting the DIMM Do not force the DIMM into the slot 4 Insert the DIMM applying equal pressure on both ends until the latches click into place If the latches do not click into place press them inward to secure the DIMM in the slot 5 Install all components removed to access the DIMM slots 6 Connect the computer to an electrical outlet 7 Power up the computer The installation is complete Troubleshooting For all troubleshooting issues during or after the memory installation process see the computer specific user documentation For additional information about HP products see the HP website http 7www hp com support
Download Pdf Manuals
Related Search