Hotpoint DISHWASHER SDL 510 User's Manual
Contents
1. accessible The cable should not be bent or compressed If the power supply cable is damaged it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards See After Sales Service This appliance must be earthed Fuses your appliance comes fitted with a plug anda 13A fuse If you need to replace the fuse only those rated at 13A and ASTA approved to BS1362 should be used If you lose the fuse cover a replacement may be obtained from your local authorised Service Centre or Electrical company Correct replacement is identified by colour coding or the marking on base of plug DO NOT use the plug unless the fuse cover is fitted E Hotpoint Changing the Plug Cut off and dispose of the supplied plug if it does not fit your socket To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else Wires in the mains lead are coloured accordance with the following code Green Yellow Earth Blue Neutral Brown Live If you change the plug the colour of the wires in the mains lead may not correspond with the terminal markings in the plug which if not coloured could be EARTH E or NEUTRAL N LIVE L Changing the Mains Lead A lead can be ordered from Hotpoint Service UK 08709 066 066 or Republic of Ireland 1850 302 220 If you have damaged the existing lead or require a longer one a charge will be made Itis strongly advised t2. crockery glasses tea and coffee cups saucers small salad bowls Saucepans and small saucepans which are not too soiled using the Loading examples as a guide e Mugs and cups long sharp knives and serving utensils place these on the tip up compartments e Antique silver Silver which is not antique may however be washed in the dishwasher using a delicate wash cycle Tip up compartments with adjustable tilt provided that it does not come into contact with other The tilt feature can be used to increase the space in the upper metals rack to position wine glasses with different stem lengths safely and to improve drying performance We recommend the use of crockery which is dishwasher safe Only available in selected models 7 k E The number and position may vary Start up and use Starting the dishwasher 1 Turn the water tap on 2 Press the ON OFF button all the indicator lights on the control panel will light up for a few seconds 3 Open the door and pour in a suitable amount of detergent see belon 4 Load the racks see Loading the racks and shut the door 5 Select the wash cycle by turning the WASH CYCLE SELECT knob in a clockwise direction align the notch on the knob with the number or symbol representing the desired wash cycle The START PAUSE indicator light will flash 6 Select the wash options see adjacent information 7 Start the cycle by pressing the START button the indica
3. see Rinse aid and salt The dishwasher does not take any There is no water in the mains supply water in Tap shut off alarm e The water inlet hose is bent see Installation e Turn on the tap and the appliance will start after a few minutes e The appliance lock has been activated because no action was taken when the several short beeps are emitted the Drying and End indicator lights Fi flash beeps sounded Switch off the appliance using the ON OFF button turn on the tap and switch the appliance back on after 20 seconds by pressing the same button Re program the appliance and restart the wash cycle Water inlet hose alarm Water inlet Switch off the appliance by pressing the ON OFF button Shut off the water tap filter blocked to eliminate the risk of flooding and remove the plug from the electrical socket the Washing Drying and End Make sure the water inlet filter has not become blocked by impurities see Care indicator lights flashes and maintenance chapter Only available in selected models After Sales Service After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us the manufacturer Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast reliable loc
4. the dispenser by turning the lid G in an anticlockwise direction 2 Pour inthe rinse aid making sure it does not overflow from the dispenser If this happens clean the spill immediately with a dry cloth 3 Screw the lid back on NEVER pour the rinse aid directly into the appliance tub Adjusting the amount of rinse aid If you are not completely satisfied with the drying results you may adjust the quantity of rinse aid used Use a screwdriver to turn the dosage adjuster F to one of the 6 pre set positions the default position is set to 4 e f there are streaks on the crockery set the adjustment device to alower number 1 3 e f drops of water remain on the crockery or if there are limescale marks present after the cycle has finished set the adjuster to a higher number 4 6 Setting the water hardness Every dishwasher is equipped with a water softener which by using refined salt designed especially for this type of appliance supplies water without limescale which is then used to wash the crockery This dishwasher offers a setting which helps to reduce pollution and optimises washing performance in accordance with the water hardness level in your area This information can be obtained from the organisation which supplies your household with water Switch the machine off using the ON OFF button and open the door Set the SELECT WASH CYCLE knob first to wash cycle 5 then to wash cycle 1 then to wash c
5. 008 Ecodesign 97 17 EC Labelling 2002 96 CE Waste Electrical and Electronic Equipment WEEE i Only available in selected models The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment Any technical checks should be conducted exclusively by a trained and authorised technician Repairs carried out by unaithorised persons will invalidate the guarantee as well as posing a potential hazard to the user The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions from tampering with even a single component or from the use of non original spare parts Electrical Connection Before inserting the plug into the electrical socket make sure that e the socket is earthed and complies with current regulations e the socket can withstand the maximum load of the appliance which is indicated on the data plate located on the inside of the door see Description of the appliance e the power supply voltage falls within the values indicated on the data plate on the inside of the door e the socket is compatible with the plug of the appliance If this is not the case ask an authorised technician to replace the plug see After Sales Service do not use extension cables or multiple sockets Once the appliance has been installed the power supply cable and the electrical socket should be easily
6. 5081930 01 04 2011 Xerox Fabriano Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer s guarantee which covers the cost of breakdown repairs for twelve months from the date of purchase This gives you the reassurance that if within that time your appliance is proven to be defective because of either workmanship or materials we will at our discretion either repair or replace the appliance at no cost to YOU This guarantee is subject to the following conditions The appliance has been installed and operated correctly and in accordance with our operating and maintenance instructions The appliance is used only on the electricity or gas supply printed on the rating plate The appliance has been used for normal domestic purposes only The appliance has not been altered serviced maintained dismantled or otherwise interfered with by any person not authorised by us Any repair work must be undertaken by us or our appointed agent Any parts removed during repair work or any appliance that is replaced become our property The appliance is used in the United Kingdom or Republic of Ireland The guarantee does not cover Damage resulting from transportation improper use neglect or interference or as a result of improper installation Replacement of any consumable item or accessory These included but not limited to plugs cables batteries light bulbs fluore
7. Instruction booklet DISHWASHER EN Contents Installation 2 5 Positioning and levelling Technical data Electrical connection Connecting the water supply English 1 Description of the appliance 6 Overall view Control panel Loading the racks 7 Lower rack Cutlery basket Upper rack Start up and use 8 9 Starting the dishwasher SDL 510 Loading the detergent Washing options Wash cycles 10 Wash cycle table Rinse aid and refined salt 11 Loading the rinse aid Loading the refined salt Care and maintenance 12 Shutting off the water and electricity supplies Cleaning the dishwasher Preventing unpleasant odours Cleaning the sprayer arms Cleaning the water inlet filter Cleaning the filters Leaving the machine unused for extended periods Precautions and advice 13 General safety Disposal Saving energy and respecting the environment Troubleshooting 14 After Sales Service 15 After Sales Service Essential Contact Information Parts and Accessories Appliance Registration Hotpoint Guarantee 16 K Hotpoint Installation Keep this instruction manual in a safe place for future reference If the appliance is sold given away or moved please ensure the manual is kept with the machine so that the new owner may benefit from the advice contained within it Please read this instruction manual carefully it contains important information regarding the safe installation use and mainte
8. Turn off the water tap Unscrew the end of the water inlet hose remove the filter and clean it carefully under running water Replace the filter and screw the water hose back into position Cleaning the filters The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water They should be cleaned if you wish to achieve the best results in every wash Clean the filters regularly The dishwasher should not be used without filters or if the filter is loose e After several washes check the filter assembly and If necessary clean it thoroughly under running water using a non metallic brush and following the instructions below 1 Turn the cylindrical filter C in an anti clockwise direction and pull it out fig 1 2 Remove the cup filter B by exerting a slight pressure on the side flaps fig 2 3 Slide out the stainless steel plate filter A fig 3 4 Inspect the trap and remove any food residue NEVER REMOVE the wash cycle pump black detail fig 4 After cleaning the filters replace the filter assembly and fix it in position correctly this is essential for maintaining the efficient operation of the dishwasher Leaving the machine unused for extended periods e Disconnect the appliance from the electricity supply and shut off the water tap e Leave the door of the appliance ajar e When you r
9. al service UK 08448 224 224 Republic of Ireland 0818 313 413 www hotpointservice co uk Please note Our advisors will require the following information Parts and Accessories We supply a full range of genuine replacement parts as well as accessory products that protect and hygienically clean your appliance to keep it looking good and functioning efficiently throughout its life UK 08448 225 225 Republic of Ireland 0818 313 413 www hotpointservice co uk E Hotpoint Appliance Registration We want to give you additional benefits of Hotpoint ownership To activate your free 5 year parts Quarantee you must register your appliance with us UK 08448 24 24 24 Republic of Ireland 01 230 0800 www hotpointservice co uk Indesit Company UK Ltd Morley Way Peterborough PE2 9JB Indesit Company Unit 49 Airways Industrial Estate Dublin 17 Recycling and Disposal Information As part of Hotpoint s continued commitment to helping the environment Hotpoint reserves the right to use quality recycled components to keep down customer costs and minimise material wastage Please dispose of packaging and old appliances carefully To minimise risk of injury to children remove the door plug and cut mains cable off flush with the appliance Dispose of these parts separately to ensure that the appliance can no longer be plugged into a mains socket and the door cannot be locked Shut 15 Guarantee 19
10. d separately in order to optimise the recovery and these parts separately to ensure that the appliance can no recycling of the materials they contain and reduce the impact longer be plugged into a mains socket and the door cannot be on human health and the environment The crossed out locked shut wheeled bin symbol on the product reminds you of your obligation that when you dispose of the appliance it must be separately collected Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance Only available in selected models 13 Troubleshooting EN Whenever the appliance fails to work check for a solution from the following list before calling for Assistance see Assistance 14 The dishwasher does not start or Switch off the appliance by pressing the ON OFF button switch it back on after cannot be controlled approximately one minute and reset the program e The appliance has not been plugged in properly e The dishwasher door has not been shut properly The door won t close e The lock was released Strongly push the door until a clacking noise is heard No water drains out from the e The dishwasher cycle has not yet finished dishwasher e The water inlet hose is bent see Installation e The drain duct is blocked e The filter is clogged up with food residues The dishwasher makes excessive e The dishes are rattling against each oth
11. d wasting detergent use the product in may cause the appliance to overturn appropriate quantities based on the manufacturer s e The door should not be left open as it may create a recommendations the hardness of the water and the soil dangerous obstacle level and quantity of the crockery Even if they are e The packaging material should not be used as a toy it can biodegradable detergents contain substances that may become a choking or suffocation hazard alter the balance of nature If your family includes children e DO NOT allow children to play with the appliance or tamper with its controls e Keep detergents and rinse aids away from children e Keep children away from the open door of a dishwasher there could still be some detergent left inside oH Recycling amp Disposal Information As part of Hotpoint s continued commitment to helping the environment Hotpoint reserves the right to use quality recycled components to keep down customer costs and Disposal of old electrical appliances minimise material wastage The European Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE requires that old household Please dispose of packaging and old appliances carefully electrical appliances must not be disposed of in the normal To minimise risk of injury to children remove the door plug unsorted municipal waste stream Old appliances must be and cut mains cable off flush with the appliance Dispose of collecte
12. ed is interrupted At this stage it is not possible to change the wash cycle Accidental interruptions If the door is opened during the wash cycle or if there is a power cut the cycle stops It starts again from the point at which it was interrupted once the door has been shut or once the electricity supply is restored Measuring out the detergent A good wash result also depends on the correct amount of detergent being used exceeding the stated amount does not result in a more effective wash and increases environmental pollution Only use detergent which has been specifically designed for dishwashers DO NOT USE washing up liquid Using excessive detergent may result in foam residue remaining in the machine after the cycle has ended The use of tablets is only recommended for models which offer the MULTI FUNCTIONAL TABLETS option To achieve the best results from each washing and drying cycle powder detergent rinse aid liquid and salt should be used Compartment A Washing detergent Compartment B Pre wash detergent 1 Open cover C by pressing button D 2 Pour in the detergent after consulting the 7able of wash cycles e For powder detergent use compartments A and B e For detergent in tablet form when the cycle requires 1 tablet place it in compartment A and close the cover when it requires 2 place the second tablet at the bottom of the appliance 3 Remove detergent residues from the edges of the co
13. er connection point your dishwasher may be provided with hot water from the mains supply if you have a central heating system with radiators provided that it does not exceed a temperature of 60 C screw the hose to the tap as described for connection to a cold water supply If the inlet hose is not long enough contact a specialist store or an authorised technician see After Sales Service The water pressure must be within the values indicated in the Technical data table see nsta ation The hose should not be bent or compressed The appliance must be connected to the water supply network using new hoses Do not use old hoses Ensure that the new hose supplied is connected and the old hose is disposed of safely DO NOT overtighten the hose connector hand tight is Sufficient Ensure the fill hose is not kinked Tap connections A range of adaptors are available to Suit your tap DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater Sink Waste System Connect the outlet hose without bending it to a drain duct with a minimum diameter of 32 mm A CCCacacaacaaacaaans s The outlet hose must be at a height ranging from 40 to 80 cm from 15 to 31 from the floor surface where the dishwasher rests A e before connecting the drain hose remove any internal restrictions this will prevent a build up of debris which could cause a blockage e remove any res
14. er or against the sprayer arms noise e An excessive amount of foam has been produced the detergent has not been measured out correctly or it is not suitable for use in dishwashers see Start up and use The dishes and glasses are e The level of the refined salt is low or the dosage setting is not suited to the covered in a white film or hardness of the water see Rinse aid and salt limescale deposits e The lid on the salt dispenser is not closed properly e The rinse aid has been used up or the dosage is too low The dishes and glasses are e The rinse aid dosage is too high streaked or have a bluish tinge The crockery has not been dried e A wash cycle without a drying program has been selected properly e The rinse aid has been used up or the dosage is too low see Rinse aid and salt e The rinse aid dispenser setting is not suitable e The crockery is made from non stick material or plastic The dishes are not clean e The racks are overloaded See Loading the racks e The crockery has not been arranged well e The sprayer arms cannot move freely e The wash cycle is too gentle see Wash cycles e An excessive amount of foam has been produced the detergent has not been measured out correctly or it is not suitable for use in dishwashers See Start up and use e The lid on the rinse aid compartment has not been shut correctly e The filter is dirty or blocked see Care and maintenance e The refined salt level is low
15. eturn run a wash cycle when the dishwasher is empty Only available in selected models Precautions and advice E Hotpoint The appliance was designed and manufactured in Saving energy and respecting the compliance with current international safety standards The environment following information has been provided for safety reasons and should therefore be read carefully Saving water and energy e Only start awash cycle when the dishwasher is full While General safety waiting for the dishwasher to be filled prevent unpleasant e This appliance is not intended for use by persons odours with the Soak cycle see Wash Cycles including children with reduced physical Sensory or e Select awash cycle that is suited to the type of crockery mental capabilities or lack of experience and knowledge and to the soil level of the crockery using the Wash cycle unless they have been given supervision or instruction table concerning use of the appliance by a person responsible for dishes with a normal soil level use the Eco wash for their safety cycle which guarantees low energy and water e Children should be supervised to ensure that they do not consumption levels play with the appliance if the load is smaller than usual activate the Half load e The appliance was designed for domestic use inside the option see Start up and use home and is not intended for commercial or industrial use e lf your electricity supply contract gives details o
16. f electricity e The appliance must be used by adults only to wash saving time bands run wash cycles during the periods domestic crockery according to the instructions in this when a lower tariff is applied The Delayed start button manual see Start up and use helps you organise the wash e The appliance must not be installed outdoors even in cycles accordingly covered areas It is extremely dangerous to leave the machine exposed to rain and storms e Donottouch the appliance when barefoot Phosphate free and chlorine free detergents e When unplugging the appliance always pull the plug from containing enzymes the mains socket do not pull on the cable e We strongly recommend that you use detergents that do e The water supply tap must be shut off and the plug should not contain phosphates or chlorine as these products are be removed from the electrical socket before cleaning the harmful to the environment appliance or carrying out any maintenance work e Enzymes provide a particularly effective action at e If the appliance breaks down do not under any temperatures around 50 C and as a result detergents circumstances touch the internal parts in an attempt to containing enzymes can be used in conjunction with low carry out the repair work yourself temperature wash cycles in order to achieve the same e Never touch the heating element results as anormal 65 C wash cycle e Donotlean or sit on the open door of the appliance this e To avoi
17. hat this work is carried out by a qualified electrician If the domestic wiring includes a residual current operated circuit breaker ensure that it conforms to the latest regulations The dishwasher must not be connected to the electricity supply while installation is being carried out This appliance should only be connected to a 230 240V AC source via a properly installed earthed socket Use the dishwasher solely in a domestic environment DO NOT stand or place heavy objects on the door when it is open this could damage the door or cause the appliance to tip forward The Company shall not be held responsible for any incidents that occur if these regulations are not observed Connecting the water supplies Connection to the water and electricity supplies should only be performed by a qualified technician The dishwasher should not stand on top of the water hoses or the electricity supply cable Connecting the water inlet hose The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation e Toa suitable cold water connection point before attaching the hose run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance after performing this operation screw the inlet hose tightly onto a tap with a gas threaded connection e Toa suitable hot wat
18. lay period stops flashing fixed light and the wash cycle begins The Delayed Start function cannot be set once the wash has already started E Hotpoint Half load If there are not many dishes to be washed a half load cycle may be used in order to save water electricity and detergent Select the wash cycle and press the HALF LOAD button the indicator light will illuminate Remember to halve the amount of detergent It is better to use powder detergent in this case This option is incompatible with the following wash cycle Speed wash Multi functional tablets This option optimises washing and drying results When using multi functional tablets press the MULTI FUNCTIONAL TABLETS button The corresponding indicator light will illuminate The Multi functional tablets option results in the lengthening of the wash cycle The MULTI FUNCTIONAL TABLETS option remains set for subsequent wash cycles if it is not deselected The use of tablets is only recommended when the MULTI FUNCTIONAL TABLETS option is available This option is not recommended for use with wash cycles which do not specify the use of multi functional tablets see Table of options Table of A B C options Delay Half Start Load 1 Intensive ves y yes y 3 Day aeo Yes y A Prewash Yes Y Beo ves v 6 Speed 25 ves yes y 7 Delicate i Only available in selected models Wash cycles If the c
19. lower rack and unscrew the La container cap anticlockwise 2 The first time you do this fill the water tank right up to its edge 3 Position the funnel see figure and fill the salt container right up to its edge this should hold approximately 1 kg it is not unusual for a little water to leak out 4 Remove the funnel and wipe any salt residue away from the opening rinse the cap under running water and then screw it on the head facing downwards so as to let the water flow out of the four cracks which are arranged in a star shape on the lower part of the cap the container cap with the green float It is advisable to perform this procedure every time you add salt to the container Make sure the cap Is screwed on tightly so that no detergent can get into the container during the wash cycle this could damage the water softener beyond repair When necessary measure out the salt before a wash cycle so that any saline solution which has leaked out of the salt dispenser is removed Only available in selected models 11 Care and maintenance Shutting off the water and electricity supplies e Turn off the water tap after every wash cycle to avoid leaks e Always unplug the appliance when cleaning it and when performing maintenance work Cleaning the dishwasher e The external surfaces of the machine and the control panel may be cleaned using a non abrasive cloth which has been dampened with water Do n
20. mpartment and close the cover until it clicks Only available in selected models Wash options The OPTIONS may only be set modified or reset after the wash cycle has been selected and before the Start Pause button has been pressed Only the options which are compatible with the type of wash cycle set may be selected If an option is not com patible with the selected was cycle see Table of wash cycles the corresponding LED flashes rapidly 3 times If an option is selected which is incompatible with another option or wash cycle selected previously the incompat ible option light will flash 3 times and switches off while the most recently selected setting remains lit To deselect an option which has been set by mistake press the corresponding button again Delayed start It is possible to delay the start time of the wash cycle by 3 6 or 9 hours After selecting the desired wash cycle and any other options select Delayed Start by pressing the Delayed start button repeatedly the washing 3 hours drying 6 hours and end 9 hours indicator lights will flash in succession If the Delayed Start button is pressed again the option is deselected After the selection process the countdown will begin if the Start Pause button is pressed The selected delay period indicator light flashes and the Start Pause button stops flashing fixed light When the time has elapsed the indicator light corresponding to the selected de
21. nance of the appliance If the appliance must be moved at any time keep it in an upright position if absolutely necessary it may be tilted onto its back This appliance is intended to be used in household and similar applications such as Staff kitchen areas in shops offices and other working environments farm houses by clients in hotels motels and other residential type environments bed and breakfast type environments Positioning and levelling 1 Remove the appliance from all packaging and check that it has not been damaged during transportation If it has been damaged contact the retailer and do not proceed any further with the installation process 2 Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall This appliance can also be recessed under a single worktop see the Assembly instruction sheet 3 Position the dishwasher on a level and sturdy floor If the floor is uneven the front feet of the appliance may be adjusted until it reaches a horizontal position the angle of inclination must not exceed 2 degrees If the appliance is levelled correctly it will be more stable and much less likely to move or cause vibrations and noise while it is operating 4 Adjust the height of the rear foot from the front of the appliance on the central lower part of the dishwasher turning a hexagonal spanner red color with an openi
22. ng of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height Anti condensation strip After installing the dishwasher open the door and stick the adhesive transparent strio under the wooden shelf in order to protect it from any condensation that may form Advice regarding the first wash cycle After the appliance has been installed immediately before running the first wash cycle completely fill the salt dispenser with water and add only then approximately 1 kg of salt see chapter entitled Rinse aid and refined sa t The water may overflow this is normal and is not a cause for concern Select the water hardness value see chapter entitled Rinse aid and refined salt After the salt has been poured into the machine the LOW SALT indicator light switches off If the salt container is not filled the water softener and the heating element may be damaged as a result Technical data Dimensions Capacity Water supply pressure Power supply voltage Total absorbed power Fuse CE width 45 cm height 85 cm depth 60 cm 10 standard place settings 0 05 1MPa 0 5 10 bar 7 25 psi 145 psi See appliance data plate See appliance data plate See appliance data plate This dishwasher conforms to the following European Community Directives 2006 95 EC Low Voltage 2004 108 EC Electromagnetic Compatibility 2005 32 EC Comm Reg 1275 2
23. ot use solvents or abrasive products e Any marks on the inside of the appliance may be removed using a cloth dampened with water and a little vinegar Preventing unpleasant odours e Always keep the door of the appliance ajar in order to avoid moisture from forming and being trapped inside the machine e Clean the seals around the door and detergent dispensers regularly using a damp sponge This will avoid food becoming trapped in the seals which is the main cause behind the formation of unpleasant odours Cleaning the sprayer arms Food residue may become encrusted onto the sprayer arms and block the holes used to spray the water It is therefore recommended that the arms are checked from time to time and cleaned with a small non metallic brush The two sprayer arms may both be removed To remove the upper sprayer arm rotate the locking ring in an anti clockwise direction The upper sprayer arm should be replaced with the holes facing upwards The lower sprayer arm can be Cleaning the water inlet filter If the water hoses are new or have not been used for an extended period of time let the water run to make sure it is clear and free of impurities before performing the necessary connections If this precaution is not taken the water inlet could become blocked and damage the dishwasher 12 removed by pulling it uowards Clean the water inlet filter at the tap outlet regularly
24. rm Gan m 7 7 Cutlery basket SU eae B ea WN eeee ie 9 Salt dispenser E ee a gt 10 Detergent and rinse aid dispensers 7 11 Data plate KkK Control panel Pee sarcasm h N L y 10 TFR 11 Ba 11 12 i 12 Control panel Multi functional tablets button and indicator light Half load button and indicator light Start Pause button and indicator light WASH CYCLE SELECT knob E On Off 1 HalfLoad Tabs Start Pause 1 Intensive 6 puda 7 2 U L D gt Il 2 Normal 7 Delicate DelayStart 3h 6h 9h 3 Daily A60 6 3 O 700 AU Low rinse aid 4 Prewash mi W H indicator light 5 4 Ss L End 5 Eco Delayed start Low salt ON OFF RESET button mercator gnt button Washing and 3h End and 9h Delayed Delayed start start indicator light indicator light Drying and 6h Delayed start indicator light Only in completely built in models Only available in selected models The number and type of wash cycles and options may vary depending on the dishwasher model Loading the racks E Hotpoint Before loading the racks remove all food residues from the crockery and empty liquids from glasses and cups Arrange the crockery so that it is held in place firmly and does not tip over After loading the appliance check that the sprayer arms can rotate freely Lower rack Lift the tip up compartment
25. rockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher reduce the amount of detergent used accordingly The number and type of wash cycles and options may vary depending on the dishwasher model Detergent Wash cycle A compartment A duration aie vee eclection Wash cycle B compartment B i tolerance eager include 10 Heavily soiled dishes and pans not to be used for delicate items 1 Intensive 25g A Normally soiled pans and dishes 2 Normal 21 g A Standard daily wash cycle l 4 g B Limited quantity of daily soiling 4 place settings 1 saucepan 1 3 Daily A 60 25 g A frying pan l g Yes Yes Environmentally friendly wash cycle with low energy P consumption levels suitable for 5 Eco pans and dishes Economic and fast wash to be used for lightly soiled dishes Run cycle immediately after use 2 plates 2 glasses 4 pieces 6 Speed of cutlery 1 saucepan 1 small frying pan 1 A 1 A 1 A Pre wash for dishes while awaiting completion of the load with the dishes from the next 4 Prewash No No No meal 1 A 1 A Economic and fast wash for delicate items which are sensitive to high temperatures Run cycle immediately after use glasses 7 Delicate 1 A upper rack delicate plates lower rack Notes To make it easier to measure out the detergent it is worth remembering that 1 tablespoon 15 gr of po
26. scent tubes and starters covers and filters Replacement of any removable parts made of glass or plastic THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NON DOMESTIC PREMISES 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers There will be a charge for our engineer s time To activate the extra parts warranty on your appliance simply call our registration line on 08448 24 24 24 Republic of Ireland 01 230 0800 Extended Guarantees We offer a selection of protection plans that enable you to fully cover yourself against the expense of repair bills for the life of your policy To find the ideal plan for you please call our advice line on 08448 226 226 Republic of Ireland 01 230 0233 Free Helpdesk Service We have a dedicated team who can provide free advice and assistance with your appliance if you experience any technical difficulties within the first 90 days of ownership Simply call our Hotpoint Service Hotline on 08448 224 224 Republic of Ireland 0818 313 413 for telephone assistance or where necessary to arrange for an engineer to call 16
27. slide it gently and position it in the The lower rack can hold pans lids plates salad bowls cutlery desired tilt angle etc as seen in the Loading examples Plates and large covers should be placed at the sides of the rack ensuring that they do not block the rotation of the upper sprayer arm Adjusting the height of the upper rack In order to make it easier to arrange the crockery the upper rack may be moved to a higher or lower level some dishwasher models are fitted The height of the upper rack should ideally be adjusted with tip up sections which can be WHEN THE RACK IS EMPTY used in a vertical position when arranging plates or in a horizontal o sams EOP NY ZAN N SSRN Never lift or lower the rack on one side only My position when arranging pans and Open the left and right guide rail stops Son en salad bowls and pull out the rack position it higher or lower as required slide it along the guide rails until the front wheels are in place and close the stops see figure Cutlery basket The type of cutlery basket may vary according to the dishwasher model The cutlery basket should be positioned at the front of the lower rack by sliding it between the fixed inserts or on the upper rack when the half load option has been selected in models featuring this option If the rack is fitted with Dual Space handles see figure pull out the upper rack until it reaches i
28. tor light will light up and remain lit in a fixed manner The indicator light corresponding to the wash phase will switch on signalling that the wash cycle has begun 8 At the end of the wash cycle the END indicator light will switch on fixed light Switch off the appliance by pressing the ON OFF button shut off the water valve and unplug the appliance from the electricity socket 9 Wait for a few minutes before removing the crockery in order to avoid burns Unload the racks beginning with the lower level The machine will switch off automatically during certain periods of inactivity in order to minimise electricity consumption Modifying a wash cycle in progress If a mistake was made during the wash cycle selection process It is possible to change the cycle provided that it has only just begun once the wash cycle has started switch off the machine by pressing and holding the ON OFF Reset button Switch it back on using the same button and select the desired wash cycle and options Adding extra crockery Press the Start Pause button the corresponding indicator light will flash Open the door taking care to avoid the escaping steam and place the crockery inside the appliance Close the door and press the Start Pause button fixed light the cycle starts from the point at which it was interrupted If the Start Pause button is pressed so as to pause the machine the wash cycle or the Delayed Start function if select
29. trictions from the waste spigot and ensure that the sealing bung Is removed B It MUST NOT be connected to a surface water drain e Untie the end of the GREY drainage hose from the rear of the appliance e f fitting an under sink waste disposal unit cut out the membrane bung or blanking plug Ensure the drain hose is securely attached to prevent it coming away while the machine is in use and causing a flood Fit hose to waste securely using a Jubilee type Clip Only available in selected models Anti flooding protection To ensure floods do not occur the dishwasher iS provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance some models are also equipped with the supplementary safety device New Acqua Stop which guarantees anti flooding protection even in the event of a supply hose rupture h WARNING HAZARDOUS VOLTAGE Under no circumstance should the water inlet hose be cut as it contains live electrical parts The Company shall not be held responsible for any incidents that occur if these regulations are not observed E Hotpoint Only available in selected models Description of the appliance EN Overall view 1 Upper rack N 2 Upper sprayer arm i A 3 3 Tip up compartments a 7 Aii 4 Rack height adjuster fe es Ya 2 5 Lower rack 6 Lower sprayer a
30. ts stop point grip the handles at the sides of the rack and move it upwards or downwards then slowly let it fall back into place It has a collapsible sliding system which means the cutlery can be J i a arranged in the best z5 possible way Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards or they must be positioned horizontally in the tip up compartments on the upper rack ZZ LLP EY AANV AAPL Za LY Loading examples for the upper rack Cutlery basket positioning examples WA Items which should not be washed in the dishwasher e Wooden items objects with wooden or horn handles or glued on parts e tems made from aluminium copper brass pewter or tin e tems made from plastic material which is not heat resistant e Antique or hand painted porcelain Upper rack Load this rack with delicate and lightweight
31. wder approximately 15 ml of liquid 1 teaspoon 5 gr of powder approximately 5 ml of liquid Optimum performance levels when using the Daily A 60 wash and Speed 25 cycles can be achieved by observing the maximum amounts of crockery specified The Eco wash cycle adheres to the regulation EN 50242 Although it has a longer duration than other wash cycles it uses less energy and is les harmful to the environment Note for Test Laboratories for information relating to comparative EN testing conditions please send an email to the following address ASSISTENZA_EN_LVS indesitcompany com 10 Rinse aid and refined salt Only use products which have been specifically designed for dishwashers Do not use table salt or industrial salt or washing up liquid Follow the instructions given on the packaging If using a multi functional product it is not necessary to add rinse aid however we recommend that you add salt especially if you live in an area where the water is hard or very hard Follow the instructions given on the packaging If you do not add salt or rinse aid the LOW SALT and LOW RINSE AID indicator lights remain lit Measuring out the rinse aid Rinse aid makes It easier for the crockery to dry as water runs off surfaces more readily and therefore does not leave streaks or marks The rinse aid dispenser should be filled e When the LOW RINSE AID indicator light on the control panel is illuminated 1 Open
32. ycle 5 again Press the ON OFF button the wash cycle phase indicator E Hotpoint lights will flash It is now possible to select the water hardness level There is a water hardness level for every wash cycle E g wash cycle 1 water hardness level 1 wash cycle 2 water hardness level 2 etc etc up toa maximum of five levels The default water softener setting is level 3 To exit the function wait a few seconds or press one of the option buttons or switch off the machine using the ON OFF button Even if using multi functional tablets the salt dispenser should still be filled Water Hardness Table fH _ mmol level For values between O f and 10 f we do not recommend the use of salt this setting may cause a slight increase in the duration of the cycle dH hardness measured in German degrees f hardness measured in French degrees mmol l millimoles per litre Measuring out the refined salt In order to achieve the best possible results using a wash cycle make sure that the dispenser is never empty Refined salt removes limescale from the water thus avoiding the formation of deposits on crockery The salt dispenser is located in the lower part of the dishwasher see Descriotion and should be filled e When the green float cannot be seen by simply looking at the cap of the salt dispenser e When the LOW SALT indicator light on the control panel is illuminated 1 Remove the
Download Pdf Manuals
Related Search