Hoover Dishwasher DDY 062 User's Manual
Contents
1. How to make savings E if you want the dishwasher to give a complete wash place the dishes in the dishwasher at the end of each meal and if necessary turn on the COLD RINSE cycle to soften the food remains and remove bigger particles of food from the new load of dishes When the dishwasher is full start the complete wash cycle programme E lf the dishes are not very dirty or if the baskets are not very full select an ECONOMY programme following the instructions in the program list What not to wash E it should be remembered that not all dishes are suitable for washing in a dishwasher We advise against using the dishwasher to wash items in thermoplastic cutlery with wooden or plastic handles saucepans with wooden handles items in aluminium crystal leaded glass unless otherwise stated E Certain decorations may fade It is therefore a good idea before loading the whole batch to wash just one of the items first so as to be sure that others like it will not fade E It is a good idea not to put silver cutlery with non stainless steel handles into the dishwasher as there could be a chemical reaction between them IMPORTANT When buying new crockery or cutlery always make sure that they are suitable for washing in a dishwasher Useful hints E In order to avoid any dripping from the top rack remove the lower rack first WE If the dishes are to be left in the machine for some time leave the door ajar to let2. Combined detergents The detergents that also contain the rinse aid must be placed in the wash section of the detergent container The rinse aid container must be empty if it is not empty set the rinse aid regulator to lowest position before using combined detergents ALL in 1 combined detergents If you are planning to use ALL in 1 3 in 1 4 in 1 5 in 1 etc combined detergents i e those with built in salt and or rinse agent we would advise the following E read carefully and follow the manufacturer s instructions given on the packaging E the effectiveness of detergents containing the built in water softener salt depends on the hardness of your water supply Check that the hardness of your water supply is within the effective range given on the detergent packaging 15 If when using this type of product you don t get satisfactory washing results please contact the detergent manufacturer In certain circumstances use of combined detergents can cause E limescale deposits on dishes or in the dishwasher Ma reduction in washing and drying performance IMPORTANT Any problems which arise as a direct result of the use of these products are not covered by our warranty Please note that using the ALL in 1 combined detergents the rinse aid and salt indicator lights only used on selected models are superfluous so you must ignore the lights If washing and or drying problems
3. SUPER ECO option button N ACTION PRO lights F ALL in 1 option button O Programme guide G ACTION PRO button DIMENSIONS with working top without working top Height cm 85 82 Depth cm 60 57 3 Width cm 60 59 8 Depth with door open cm 120 117 TECHNICAL DATA EN 50242 place load 12 Capacity with pans and dishes 8 persons Water supply pressure Min 80 kPa Max 800 kPa Fuse see rating plate Power input see rating plate Supply voltage see rating plate 20 PROGRAMME SELECTION AND SPECIAL FUNCTIONS Use in conjunction with programme guide IMPORTANT The dishwasher has a very practical function the memory function which saves the last programme used so that if you regularly use the same washing cycle you do not have to re set the programme every time thereby saving time and effort ACTION PRO button Action PRO This button allows you to modify the wash intensity according to how dirty your dishes are by modifying the wash time and temperature Press the button to increase the intensity of wash cycle J indicator light or to reduce the intensity of wash this also allows you to decrease the wash length time g indicator light The combination of the button with the 4 main wash programmes enables to have 8 additional wash cycles achieving a total of 12 programmes of washing IMPORTANT When the dishwasher is switched on the setting last used will be indicated Programme setting
4. Lower basket fig 5 A soup plates B dinner plates dessert plates serving dish cutlery moo Wow Cutlery basket fig 6 The cutlery basket is made with two detachable parts which will enable various loading options The two parts canbe detached by sliding the left section away from the right section The top of cutlery basket can be removed for enable various loading options 13 LOADING THE DETERGENT The detergent IMPORTANT It is essential to use a detergent that is specifically designed for dishwashers either in powder liquid or tablet form Unsuitable detergents like those for washing up by hand do not contain the proper ingredients for use in a dishwasher and stop the dishwasher from working correctly Filling the detergent container The detergent container is inside the door fig A 2 If the lid of the container is closed press the button A to open At the end of every wash cycle the lid is always open and ready for the next time the dishwasher is used AN WARNING When loading the lower basket please ensure that the plates or others do not obstruct the detergent dispenser The amount of detergent to be used varies according to how dirty the dishes are and on the type of dishes to be washed We advise using 20 30 g of detergent in the wash section of detergent compartment B After pouring the detergent into the container close the lid firs
5. obtain the appropriate filter art 9226085 from the After Sales Service Centre fig 3 The filter D must be inserted between the tap B and the inlet hose A remembering to fit the washer C E If the dishwasher is connected to new pipes or to pipes which have not been in use for a long time run water through for a few minutes before connecting the inlet hose In this way no deposits of sand or rust will clog up the water inflow filter E The hose can be hooked over the side of Connecting the outlet hose the sink but it must not be immersed in water in order to prevent water from being syphoned back to the machine E The outlet hose should disharge into a when this is in operation fig 4Y standpipe making sure that there are no kinks fig 4 E When installing the appliance under a worktop the hose pipe clamp must be E The standpipe must be at least 40 cm attached to the wall in the highest possible above floor level and it must have an position under the worktop fig 4Z internal diameter of at least 4 cm i f E Check that there are no kinks in the inlet E It is advisable to fit an anti odour air trap and outlet hoses fig 4X E If necessary the outlet hose can be extended up to 2 5 m provided that it is kept at a maximum height of 85 cm above floor level The extension pipe is available from the After Sales Service Centre max 100 cm INSTALLATION IN FITTE
6. occur we recommend you return to use traditional separate products salt detergent and rinse agent This will ensure that the water softener in the dishwasher operates correctly In this case we recommends that you E refill both the salt and rinse aid container E run one normal washing cycle without a load Please note that on return to the use of conventional salt a number of cycles will be required before the system becomes fully efficient again An WARNING Some dishwasher detergents are strongly alkaline They can be extre mely dangerous if swallowed Avoid contact with the skin and eyes and keep children away from the dishwa sher when the door is open Check that the detergent receptacle is empty after completion of the wash cycle LOADING THE RINSE AID The rinse aid The rinse aid which is automatically released during the last rinsing cycle helps the dishes to dry quickly and prevents spots and stains forming Filling the rinse aid container The rinse aid container can be found to the left of the detergent container fig A 3 To open the lid push the reference mark and in the same time pull the tab of opening It is always advisable to use rinse aid that is specifically designed for dishwasher Check the rinse aid level through the indicator eye C which is located on the dispenser FULL EMPTY dark light Regulating the rinse aid from 1 to 6 The regulator D is placed un
7. place load Quick wash for dishes which are to be washed immediately after the meal Max 6 place load Short cold pre wash for items that are stored in the dishwasher until you are ready to wash a full load Avarage Special function Check list Programme contents duration buttons in minutes available Detergent for soaking Prewash Detergent for washing Clean filter Check rinse aid dispenser Check salt container Hot pre wash Cold pre wash Main wash First cold rinse Second cold rinse Hot rinse with rinse aid With cold water 15 C Tolerance 10 DELAY START button SUPER ECO button ALL in 1 button E eee oooo 5 g 25 g 59 259 5g 259 0g 259 0g 259 BRR EGER REREEE 0g 259 09 259 5g 259 lclelele jelte lo f 0g 259 eis eis eio 1 oer s 5g 259 0g 259 0 g 0 9 N A OPTION NOT AVAILABLE IDENTIFYING MINOR FAULTS Should the dishwasher fail to operate before contacting the Service Centre make the following checks FAULT CAUSE REMEDY Plug is not connected to wall Connect electric plug socket O I button has not been pressed Press button 1 Machine completely dead Door is open Close door No electricity Check the fuse in the plug and the electricity supply See causes for no 1 Check Water tap is turned off Turn water tap on 2 Machine does not Programme selector is not at Turn
8. programme selector to draw water correct position correct position The inlet hose is bent Eliminate the bends in the hose The inlet hose filter is not Clean the filter at the end of the correctly connected hose Filter is dirty Clean filter Outlet hose is kinked Straighten outlet hose 3 Machine does not The outlet hose extension is Follow the instructions for discharge water not correctly connected connecting the outlet hose carefully The outlet connection on the Call a qualified technician wall is pointing downwards not upwards 4 Machine discharges Position of outlet hose is too Lift outlet hose to at least 40 cm water continuously low above floor level Excessive amount of detergent Reduce amount of detergent Use suitable detergent 5 Spray arms are not heard Item prevents arms from rotating Check to rotate Plate and cup filter very dirty Clean plate and cup filter 6 On electronic appliances Water inlet tap turned off Switch off the appliance without a display one or Turn on the tap more LED flashing quickly Re set the cycle 26 FAULT CAUSE REMEDY See causes for no 5 Check Bottom of saucepans have not Burnt on food remains must been washed well be soaked before putting pans in dishwasher Edge of saucepans have not Reposition saucepans been washed well Spray arms are partially blocked Remove spray arms by unscrewing ring nuts clockwise and wash under runn
9. 2 Option buttons SUPER ECO button This button provides an energy and time saving of 25 on average according to the select cycle reducing the wash water temperature and the drying time during the final rinse This programme is recommended for light soil washes and for slightly wet dishes that are not fully dry amp improved drying results We advise you to leave the door of the Dishwasher half open at the end of the cycle to allow for a natural circulation of air inside the dishwasher ALL in 1 button amp This option optimises the use of ALL in 1 3 in 1 4 in 1 5 in 1 ecc combined detergents By pressing this button the selected washing programme is modified to get best performance from combined detergents furthermore the salt aid shortage light is de activated A WARNING Once selected this option keeps being on light on also for next washing cycles and it can be de activate light off only by pressing the button once again IMPORTANT When this option is selected the RAPID cycle is 10 minutes longer DELAY START button The dishwasher start time can be set with mis button delaying the start by 3 6 or 9 ours Proceed as follows to set a delayed start E Press the DELAY START button each time the button is pressed the start will be delayed by 3 6 or 9 hours respectively and the corresponding time indicator light will illuminate M To start the cou
10. ALLATION Technical notes E After unpacking adjust the height of the dishwasher For the dishwasher to work correctly it must be level Adjust the feet so that the machine does not tilt by more than 2 degrees E If it you need to move the machine after removing the packaging do not try to lift it by the bottom of the door Follow the instructions in the figure below Open the door slightly and lift the machine by holding on the top IMPORTANT When the appliance is located on a carpet floor attention must be paid to ensure that there is no obstruction to the bottom vents Make sure that the plug on the appliance remains accessible after installation Disposal E The dishwasher has been made from materials which can be recycled so that it can be disposed of in an environmentally friendly way E If you wish to dispose of an old dishwasher be careful to remove the door to eliminate the risk of children becoming trapped inside it Electrical connection This appliance complies with international safety standards and is fitted with a 3 pin plug with earth connection to ensure complete earthing of the product Before connecting the appliance to the mains supply it is important to ensure 1 that the supply socket is properly earthed 2 that your electricity supply is capable of meeting the consumption requirements listed on the rating plate of your appliance A WARNING Ensure that your product is
11. D KITCHENS Fitting between existing cabinets E The height of the dishwasher 85 cm has been designed in order to allow the machine to be fitted between existing cabinets of the same height in modern fitted kitchens fig 5 The feet can be adjusted so that correct height is reached Opening the door Put your hand into the recess and pull If the machine comes open while it is working an electrical safety device automatically switches everything off IMPORTANT For the machine to work properly the door should not be opened while it is in operation Underneath existing work top when fitting beneath a work top E In most modern fitted kitchens there is only one single work top under which cabinets and electrical appliances are fitted In this case remove the work top of the dishwasher by unscrewing the screws under the rear edge of the top fig 6a IMPORTANT After removing the work top the screws MUST BE screwed again under the rear edge of the top fig 6b E The height will then be reduced to 82 cm as scheduled by the International Regulations ISO and the dishwasher will fit perfectly under the kitchen working top fig 7 Closing the door Place the baskets in the machine Make sure that both the spray arms are free to rotate and are not obstructed by cutlery crockery or pans Close the door pressing on it to make sure it is firmly shut WATER SOFTENER UNIT Depending on the source o
12. EN User instructions HOOVER DDY 062 DISHWASHER CONTENTS Safety advice Setting up installation Water softener unit Loading the salt Adjusting the upper basket Loading the dishes Loading the detergent Types of detergent Loading the rinse aid Cleaning the filters Some practical hints Routine cleaning and maintenance Description of the control panel Technical data Programme selection and special functions Programme guide Identifying minor faults pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag pag Please read the instructions in this booklet carefully because they contain important information on how to install use and maintain your dishwasher safely as well as containing useful tips on how to make the most of it Keep this booklet safe for future reference 2 SAFETY INSTRUCTIONS There are certain basic safety rules which are valid for any domestic appliance Installation E Make sure that the plug fitted to the machine is compatible with the power supply socket If it is not get a suitably qualified person to fit the correct type and to make sure that the cables to the mains socket are able to cope with the power rating of the appliance E Ensure that the dishwasher does not crush power cables E Do not use this appliance with adaptors power boards or extension cords E Sho
13. der the lid and can be turned using a coin The recommended position is 4 The limestone content of the water considerably affects the formation of limescale and the drying performance It is therefore important to regulate the quantity of rinse aid to achieve good washing results If after the wash streaks occur on the dishes decrease the amount by one position If whitish spots occur increase the amount by one position 16 CLEANING THE FILTERS The filter system fig A 4 consists of a central container that traps the larger particles a flat gauze that continuously filters the wash water a micro filter located beneath the gauze that traps the tiniest particles ensuring a perfect rinse HM To achieve excellent results every time the filters should be checked and cleaned after each wash E To remove the filter unit simply turn the handle anticlockwise fig 1 E For ease of cleaning the central container is removable fig 2 mM Remove the gauze filter fig 3 and wash the whole unit under a jet of water If necessary a small brush can be used E With the Self cleaning Micro filter maintenance is reduced and the filter unit need only be checked every two weeks Nevertheless after each wash it is advisable to check that the central container and the gauze filter are not clogged AN WARNING After cleaning the filters make sure that they are correctly reassembled and that th
14. e gauze filter is properly positioned at the bottom of the dishwasher Make sure that the filter is screwed back clockwise into the gauze as poor seating of the filter unit could have an adverse effect on the efficiency of the appliance IMPORTANT Never use the dishwasher without the filters 17 PRATICAL HINTS How to get really good wash results Before placing the dishes in the dishwasher remove any remaining food bones shells pieces of meat or vegetables coffee grounds skin of fruit cigarette ash tooth picks etc to avoid blocking the filters water outlet and washing arm nozzles Try not to rinse the dishes before loading them into the dishwasher If saucepans and oven dishes are encrusted with the remains of burnt or roast food it is advisable to leave them to soak before washing Place the dishes face downwards Try to place the dishes in such a way that they are not touching one another If they are loaded properly you will get better results After loading the dishes check that the washing arms can rotate freely Pans and other dishes that have particularly stubborn food particles or remnants of burnt food should be left to soak in water with dishwasher detergent To wash silver properly a rinse the silver immediately after use especially if it has been used for mayonnaise eggs fish etc b do not sprinkle detergent onto it c keep it separate from other metals
15. e it left off J WARNING If you open the door during the drying cycle an audible audio signal advises you that the drying cycle has not yet finished Changing a running programme Proceed as follows to change or cancel a running program E Hold the RESET button down for at least 5 seconds The programme indicator lights will flash and some audible signals will sound E The running programme will be cancelled E At this point a new programme can be set A WARNING Before starting a new programme you should check that there is still detergent in the dispenser If necessary top up the dispenser Programme operations When a programme is running the relevant indicator light will remain on and the 3 PROGRAMME STATUS indicator lights WASH DRY 2 and END tee will light singularly and in sequence to indicate the current phase If there is any break in the power supply while the dishwasher is operating a special memory stores the selected programme and when the power is restored it continues where it left off Programme end A 5 second alarm will sound if not muted 3 times at 30 second intervals to signal that the programme has ended The programme end indicator light will turn on while all the others indicator lights will turn off Dishes can now be removed and the dishwasher turned off by pressing the ON OFF button or dishes can be loaded for new cycle 2
16. e washing cycle is complete and that there is no remaining water inside the dishwasher PROGRAMME GUIDE Wash with prewash For wash programmes with prewash it is advisable to add a second dose of detergent max 5 g directly in the machine Programme elas Hygienict 75 C INTENSIVE 75 C Strong amp Fast 65 C Family 70 C UNIVERSAL 60 C 55 C Eco plus 55 C Glassware 45 C AWashs9 65 C RAPID 29 50 C Pre wash Description An antibacterial cycle intended for washing and sterilising dishes even heavily stained ones babies bottles etc Once a day for heavily soiled pam and any other items that have been left all day for washing Intended for rapid washing of heavily soiled crockery and cutlery For mixed loads with pots and pans including some heavy soiled items of crockery and cutlery Intended mixed soiled loads including heavy soiled items of crockery glassware and cutlery Fast cycle for mixed lightly soiled loads of crockery glassware cutlery pots and pans A medium temperature programme intended for washing pans and dishes that are normally dirty using detergents which contain enzymes Energy saving program intended for normal soiled loads of crockery glassware and cutlery Programme for testing to AS NZS 2007 Suitable for delicate crockery and glassware Suitable for heavily soiled items that are to be washed straight after a meal Max 8
17. esidential type environments bed and breakfast type environments A different use of this appliance from household environment or from typical housekeeping functions as commercial use by expert or trained users is excluded even in the above applications If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer s warranty Any damage to the eee or other damage or loss arising through use that is not consistent with domestic or household use even if located in a domestic or household environment shall not be accepted by the manufacturer to the fullest extent permitted by law W The dishwasher is designed for normal kitchen utensils Objects that have been contamined by petrol paint traces of steel or iron corrosive chemicals acids or alkalis must not be washed in the dishwasher E If there is a water softening device installed in the home there is no need to add salt to the water softener fitted in the dishwasher Cutlery is washed best if it is placed in the basket with the handles downwards E If the appliance breaks down or stops working properly switch it off turn off the water supply and do not tamper with it Repair work should only be carried out by an approved service agent and only genuine spare parts should be fitted Any failure to follow the above advice may have serious consequences for the safety of the appliance INST
18. f the supply water contains varying amounts of limestone and minerals which are deposited on the dishes leaving whitish stains and marks The higher the level of these minerals present in the water the harder the water is The dishwasher is fitted with a water softener unit which through the use of special regeneratin salt supplies softened water for was ing the dishes The degree of hardness of your water can be obtained from your water supply company Regulating the water softener The softener unit can treat water with a hardness of up to 90 fH French grading or 50 dH German grading through 6 different settings The table below lists different degrees of water hardness with the corresponding setting for the softener unit Water D hardness as So D lt 3 cg lse Sce 2 oo Ge oon sls o res acon 250 ESs SES 50 34 SLST om D ES gej 2 No indicat o 0 5 0 3 NO N indi ator Indicator light 1 6 15 4 9 YES 03 is 2 16 30 10 16 YES Indicator lights The water softener unit is set in the factory at level 3 as this is suitable for the majority of users According to the degree of hardness of your water regulate the softener unit in the following way IMPORTANT The dishwasher must be ALWAYS off before start this procedure 1 Hold down the PROGRAMME SELECTION button and at the same time switch on the dishwasher by pressing the ON OFF button a brief audible signal w
19. hand since the final drying cycle hardens the deposits which a second wash in the machine would not be able to remove If the malfunction continues contact a Service Centre quoting the serial number of the dishwasher This is found on the plaque on the inside of the dishwasher door at the top or on the guarantee This information will make it possible to take more effective action more quickly The manufacturers decline any responsibility for any printing mistakes in this instruction booklet They also reserve the right to modify their own appliances as necessary without altering the essential characteristics 27 The manufacturer declines all responsibility in the event of any printing mistakes in this booklet The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics This appliance is marked according to the European directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol on the product indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance
20. ill sound 2 Keep the PROGRAMME SELECTION button pressed for at least 5 seconds UNTIL an audible signal sounds Some PROGRAMME SELECTION indicator lights will come on to indicate the current water softener setting level 3 Press the same button again to select the required water softener level each time the button is pressed one indicator light will come on the water softener level is indicated by the number of lights on For level 5 4 lights will flash for level 0 all lights will be off 4 Turn off the dishwasher by pressing the ON OFF button to confirm the new setting 3 131 45 17 25 YES Indicator lights 4 46 60 26 33 YES Indicator lights 1 2 3 4 5 61 90 34 50 ygs nacater lights flashing A WARNING If any problem occurs turn the dishwasher off by pressing the ON OFF button and start the procedure again from the beginning STEP 1 PROGRAMME SELECTION indicator lights 1 2 3 4 ON OFF button PROGRAMME SELECTION button LOADING THE SALT E On the bottom of the machine there is a container for the salt for regenerating the softener E It is important to use only a salt that is specifically designed for dishwasher Other types of salt contain small quantities of insoluble particles which over a long period of time may affect and deteriorate the softener performance E To add salt unscrew the cap of the con tainer
21. ing water 7 Load of dishes is only partially washed The dishes have not been Do not place the dishes too properly loaded closely together The end of the outlet hose is in The end of the outlet hose the water must not come into contact with the outflow water The incorrect amount of Increase the measure detergent has been measured according to how dirty the out the detergent is old and hard dishes are and change detergent The wash programme is not Choose a more vigorous thorough enough programme The lower basket dishes have Depress half load button not been washed 8 Detergent not dispensed Cutlery dishes pans etc stop Position dishes not to obstruct or partially dispensed the detergent dispenser opening the dispenser 9 Presence of white spots Water is too hard Check salt and rinse aid level on dishes and regulate amount Should the fault persist Contact Service Centre 10 Noise during wash The dishes knock against one Re check loading of dishes in another the basket The revolving arms knock against Again re check loading the dishes 11 The dishes are not Inadequate air flow Leave the dishwasher door ajar completely dry at the end of the wash program to allow the dishes to dry naturally Rinse aid missing Fill the rinse aid dispenser N B Should any of the situations occur and should the machine give a bad wash performance it is necessary to remove the deposits from the dishes by
22. inless steel however should spots caused by oxidation occur this is probably due to a high level of iron salts presents in the water E The spots can be removed with a mild abrasive agent never use chlorine based materials steel wool etc 19 WHEN CYCLE IS FINISHED After every wash it is essential to turn off water supply and to switch off the machine by pressing the On Off button to the off position If the machine is not going to be used for some time it is advisable to follow these rules 1 do an empty wash with detergent in order to clean the machine of any deposits pull out the electric plug turn off the water tap fill the rinse aid container leave the door ajar keep the inside of the machine clean No 7 FPF Y BD If the machine is left in places where the temperature is below 0 C any water left inside the pipes may freeze Wait until the temperature rises above zero and then wait for about 24 hours before starting up the dishwasher DESCRIPTION OF THE CONTROL PANEL sno hO Hoover A B CD N G FE _ ed ee a Ee og PRO OESO StrongaFast esc Daily 55 C Glassware asec Pre was h 5 A ON OFF button H PROGRAMME SELECTION lights B PROGRAMME SELECTION button SALT EMPTY light C DELAY START button L PROGRAMME STATUS lights DELAY START time lights D START RESET button start cancelling programme M OPTION SELECTION lights E
23. loaded onto the upper basket and the mobile supports cannot be used when the basket is in the upper position LOADING DISHES Using the upper basket WE The upper basket is provided with mobile racks hooked to the sides of the basket which can be regulated into two positions upright and lowered E In the lowered position the racks may be used for such items as tea and coffee cups kitchen knives and ladles Also glasses with stems may be safely hung on the ends of the racks Glasses cups saucers and dessert plates may be loaded under the racks E in the upright position the racks allow you to load dinner plates and soup plates Plates should be loaded vertically with the underside of the plate towards the back of the dishwasher with a space between each plate to allow water to pass freely E It is advisable that the plates loaded into the dishwasher together be the same size in order to utilize total basket capacity E Plates may be loaded in a single row or on both rows Milt is advisable to load large plates approx 27 or more cm slightly tilted towards the rear to facilitate introduction of the basket into the machine E Salad bowls and plastic bowls may also be loaded on the upper basket It is advisable to block these in place so that the jets of water do not make them overturn E The upper basket has been designed to offer maximum flexibility in use and can be loaded with up
24. ntdown press the START button the selected programme indicator light will come on while the set time indicator light will start to flash If a 9 hour delay is set countdown will be displayed by the 6h indicator light after 3 hours and the 3h indicator light after 6 hours At the end of the last 3 hours at the end of countdown the 3h indicator light will stop flashing and remain on to indicate the washing phase and the programme will start automatically If countdown has not ended whereby the programme has not yet started it is possible to change or cancel the delayed start and select another programme or to select deselect the option button proceeding as follows E Hold the RESET button down for at least 5 seconds The programme indicator lights will flash and some audible signals will sound E The delayed start and the selected programme will be cancelled E Press the DELAY START button to set another delayed start time the corresponding indicator light will turn on E A new programme can be set after a delayed time has been changed or cancelled or an option button can be selected or deselected Alarm mute for the PROGRAMME END The alarm for the programme end may be muted as follows IMPORTANT The dishwasher must be ALWAYS off before start this procedure 1 Hold down the PROGRAMME SELECTION button and at the same time switch on the dishwasher by pressing the ON OFF button a brief audible
25. on the bottom and then refill the container E During this operation a little water will overflow but keep adding salt until the container is full When the container is full clean the thread of salt residue and retighten the tap E After loading the salt it is recommended running a complete washing cycle or COLD RINSE programme The salt dispenser has a capacity of between 1 5 and 1 8 kg and for efficient use of the appliance it should be refilled from time to time according to the regulation of the water softener unit IMPORTANT Only for first start up When the appliance is used for the first time after completely filling the salt container it is necessary to add water until the container overflows Salt loading indicator This model is provided with an indicator light on the control panel which will light up when it is necessary to reload the salt container IMPORTANT The appearance of white stains on dishes is generally an important sign that the salt container needs filling ADJUSTMENT OF THE UPPER BASKET If 27 cm to 31 cm plates are normally used load them onto the lower basket after the upper basket has been placed in its upper position and proceed as detailed below 1 Turn the front stops A outwards 2 Take out the basket and remount it in the upper position 3 Replace the blocks A in their original position Dishes that are bigger than 20 cm in diameter can no longer be
26. properly earthed In the absence of adequate earthing you will notice that when touching the metal parts of your appliance an electrical dispersion can be felt due to the presence of a radio interference suppressor Manufacturer declines all responsibility for any damage due to non earthing of the machine C Appliance complies with European Directives 73 23 EEC and 89 336 EEC replaced by 2006 95 EC and 2004 108 EC and subsequent amendments Water connection IMPORTANT The appliance must be connected to the water mains using new hose sets The old hose sets should not be reused E The inlet and drain hoses can be directed to left or right IMPORTANT The dishwasher can be connected to either cold or hot water as long as it is no hotter than 60 C E Water pressure must be between 80 kPa and 800 kPa If the pressure is below the minimum consult our service department for advice E The inlet hose must be connected to a tap so that the water supply can be cut off when the machine is not in use fig 1 B E The dishwasher is fitted with 3 4 threaded connector fig 2 E Connect inlet hose A to water tap B with a 3 4 attachment making sure that it has been properly tightened E f it is necessary the inlet pipe can be lengthened up to 2 5 m The extension pipe is available from the After Sales Service Centre E If limescale deposits or sand are present in the water it is advisable to
27. s E Open the door and place the dirty dishes inside the appliance E Press the ON OFF button The indicator light for the last programme used will flash E To set another programme press the PROGRAMME SELECTION button 21 E If you wish press the ACTION PRO button E If you wish to select an option press the corresponding button the indicator light will turn on The option buttons can be selected or deselected WHITIN one minute of the programme commencing E Press the START button the selected programme indicator light will stop flashing and remain on E When the door is shut after an audible signal has sounded the programme will start automatically WITHIN one minute of the programme commencing another programme can be selected simply by pressing the PROGRAMME SELECTION button it is also possible to change the ACTION PRO button setting Programme interruption Opening the door when a programme is running is not recommended especially during the main wash and final hot rinse phases However if the door is opened while a programme is running for example to add dishes the machine stops automatically Close the door without pressing any buttons The cycle will start from where it left off IMPORTANT A running program can be interrupted without opening the door by pressing the ON OFF button In this case simply press the ON OFF button again to restart the cycle from wher
28. signal will sound 23 2 Keep the PROGRAMME SELECTION button pressed for at least 15 seconds during this time 2 audible signals will sound 3 Release the button when the second audible signal sounds 3 PROGRAMME SELECTION indicator lights will come on 4 Press the same button again the 3 indicator lights which indicate that the alarm is activated will start flashing to indicate that the alarm is off 5 Turn off the dishwasher by pressing the ON OFF button to confirm the new setting To turn the alarm on again follow the same procedure Fault signals If malfunctions or faults occur when a programme is running the indicator light that corresponds to the selected cycle will flash rapidly and the alarm sounds In this event turn the dishwasher off by pressing the ON OFF button After checking to make sure the water inlet hose tap is open that the drain hose is not bent and that the siphon or filters are not clogged set the selected programme again If the anomaly persists contact Customer Service Department IMPORTANT This dishwasher is equipped with an anti overflow safety device which will automatically discharge any excess water should a problem occur A WARNING To ensure the correct operation of the anti overflow safety device we recommend that the dishwasher is not moved or tilted during operation If however it is necessary to tilt or move the dishwasher please ensure that th
29. some air circulate and to improve the drying performance 18 CLEANING AND MAINTENANCE E To clean the dishwasher outside do not use solvents degreasing action neither abrasives but only a cloth soaked with water E The dishwasher does not require special maintenance because the tank is self cleaning E Regularly wipe the door gasket with a damp cloth to remove any food remains or rinse aid E it is advisable to remove limestone deposits or dirt periodically by doing an empty wash pour a glass of vinegar on the bottom of the tank and select the light wash E If in spite of the routine cleaning of the filters you notice that the dishes or pans are not properly washed or rinsed check that all the spray heads on the rotor arms fig A 5 are clear If they are blocked clean them in the following way 1 to remove the upper rotor arm turn it until it lines up with the stop marked by the arrow fig 1 Push it upwards fig 1b and keeping it pushed in unscrew it in a clockwise direction to reassemble it repeat the same operation but turn it anticlockwise The lower rotor arm can be removed simply by pulling it upwards fig 2 2 wash the rotor arms under a jet of water to clear any blockage in the spray heads 3 when you have finished refit the rotor arms in the same position remembering to re align the arrow and screw into position E Both the door lining and the tank lining are in sta
30. tly pushing 1 and then pressing on it 2 until you hear the click Since not all detergents are the same the instructions on the boxes of detergent can vary We should just like to remind users that too little detergent does not clean the dishes properly whilst too much detergent will not produce better results and is also a waste IMPORTANT Do not use an excessive amount of detergent and help limit damage to the environment at the same time TYPES OF DETERGENT Detergent tablets Detergent tablets of different manufacturers dissolve at different speeds for this reason during short programmes some detergent tablets may be not fully effective because they are not completely dissolved If these products are used is recommended to choose longer programmes to guarantee the complete use of the detergent IMPORTANT To get ooteraciony washing results the tablets MUST be placed in the wash_ section of the detergent container and NOT directly in the tub Concentrated detergents The concentrated detergents with reduced alkalinity and with natural enzymes in conjunction with 50 C wash programmes have a smaller impact on the environment and they protect the dishes and the dishwasher The 50 C wash programmes pilrposaly exploit the dirt dissolving properties of the enzymes allowing therefore with the use of the concentrated detergents to achieve the same results of the 65 C programmes but at a lower temperature
31. to 24 plates on two rows up to 30 glasses on five rows or a mixed load 11 A standard daily load is represented in figs 1 2 and 3 Upper basket fig 1 A soup plates B dinner plates dessert plates saucers cups glasses moo Upper basket fig 2 A soup plates B dinner plates C dessert plates D saucers E cups F glasses G single section cutlery basket Upper basket fig 3 A glasses saucers cups small bowl medium bowl large bowl serving spoons QOmmooOwW Using the lower basket E Saucepans oven dishes tureens salad bowls lids serving dishes dinner plates soup plates and ladles can be loaded on the lower basket E Place the cutlery in the plastic cutlery holder with the handles pointing upwards E Place the cutlery holder on the lower basket fig 4 and 5 making sure that the cutlery does not get in the way of the rotating arms IMPORTANT The lower basket has a safety stop device for its safe extraction also especially useful with a full load For loading salt cleaning filter and for ordinary maintenance the complete extraction of the basket is necessary Please load the dishwasher sensibly to ensure the best wash results A standard daily load is represented in figs 4 and 5 Lower basket fig 4 A medium sized saucepan B large saucepan C frying pan D lids E tureens serving dishes F cutlery G oven dishes
32. uld it be necessary to replace the supply cord call the After Sales Service Centre Safety WE Never touch the appliance when your hands or feet are wet or damp Do not use when your feet are bare E Do not remove the plug from the mains supply socket by pulling the mains cable or the machine itself E Do not leave the appliance exposed to the elements rain sun etc E This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance E Water left in the machine or on the dishes at the end of the wash programme should not be swallowed E The door should not be left in the open position since this could present a potential hazard es tripping E Leaning or sitting on the open door of the dishwasher could cause it to tip over A WARNING Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position Daily use E This usehoid and is intended to be used in cope old and similar applications such staff kitchen areas in shops offices and other working environments farm houses by clients in hotels motels and other r
33. with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product 2 11 11 41900293
Download Pdf Manuals
Related Search