Honeywell TE601CELW User's Manual
Contents
1. A COLOR WEATHER FORECAST WITH FOUR LINE LCD DISPLAY Allows easy reading of color animated weather forecast indoor outdoor temperature and calendar clock B amp F ALARM BUTTONS Sets an alarm and allows displaying alarm status C CHANNEL SELECTOR Recalls the different remote sensor reading D TOGGLE BUTTON a Selects the WEATHER FORECAST or BAROMETRIC PRESSURE CHART display mode b Selects the SINGLE or DEFAULT TOGGLE display modes c Increases altitude in ALTITUDE ADJUSTMENT mode E UNIT BUTTON a Selects pressure display in mB hPa inHg or mmHg b Selects altitude adjustment display in feet or meters c Decreases altitude in ALTITUDE ADJUSTMENT mode G MODE BUTTON Changes display modes and confirms settings H UP A BUTTON Increases the setting I DOWN vw BUTTON Decreases the setting J SNOOZE LIGHT BUTTON Activates snooze function and LCD backlight K BATTERY COMPARTMENTS Accommodates 2 two UM 3 or AA 1 5V alkaline batteries L CLEAR REMOVABLE TABLE STAND Holds unit in upright position on the flat surface M AC DC 6V ADAPTOR Activates the Color LCD REMOTE SENSOR FEATURES e Remote temperature transmission to the main unit via 433 MHz signal Case can be wall mounted using built in hanger 100 feet transmission range without interference LCD display of measured temperature Temperature display selection in Fahrenheit or Celsius Transmission chan2. Honeywell Color Weather Forecaster with Indoor Outdoor Thermometer USER MANUAL TE601CELW INTRODUCTION Thank you for selecting the Honeywell Color Weather Forecaster with Indoor Outdoor Thermometer This device includes weather forecast pressure precise time keeping and temperature monitoring features that you can use from the comfort of your home In this package you will find e Main unit receiver e Remote sensor transmitter TS13 e AC DC Adapter Please keep this manual handy as you use your new item It contains practical step by step instructions as well as technical specifications and precautions you should know PRODUCT OVERVIEW MAIN UNIT F EATURES Wireless sensor transmits temperature to the main unit from up to 100 feet away Multi channel capability to monitor temperature in up to 3 remote locations Indoor and Remote temperature displays Barometric pressure condition displayed in 3 trend indicators Rising Steady and Falling Color animated weather forecast in 5 large graphic icons Sunny Partly Cloudy Cloudy Rainy and Snowy Precise time and date set via RF signal from US Atomic clock Calendar displays date with month amp weekday in English Spanish French German or Italian Dual crescendo alarm with snooze Programmable low temperature alarm warns about icy or inclement weather conditions Blue Backlight AC DC adapter
3. 4 more minutes and then will stop by itself DISABLING ALARM Press ALARM button on the main unit to disable any alarm ALARMS Weekday Alarm The alarm will sound and the alarm icon will flash at the set time Mondays through Fridays Single Day Alarm The alarm will sound and the alarm icon will flash at the set time but will not activate on subsequent days Pre Alarm If an outdoor temperature is 32 F 0 C or below the pre alarm feature will be activated The pre alarm time interval can be set for 15 30 45 60 75 or 90 minutes before the weekday or single alarm time Press and hold ALARM button for two seconds in Pre Alarm mode to set the pre alarm interval 15 W Weekday alarm S Single day alarm and Pre AL Pre alarm icons will indicate which alarm mode is armed You can enable or disable an alarm by pressing the A V buttons in alarm display mode Press MODE to toggle between alarm modes or to return to the default display PRECAUTIONS This product is engineered to give you years of satisfactory service if handled carefully Here are a few precautions 1 Do not immerse the units in water 2 Do not clean the units with abrasive or corrosive materials They may scratch the plastic parts and corrode the electronic circuits 3 Do not subject the product to excessive force shock dust temperature or humidity which may result in malfunctions shorter lifespan dama
4. Click Online Product Registration under the Customer Service menu Should you require assistance with this product and its operation please contact our Customer Service Hotline 1 866 443 3543 Please direct all returns to the place of the original purchase Should this not be possible contact Customer Service Hotline for assistance and to obtain a Return Merchandise Authorization RMA Returns without a return authorization will be refused Please retain your original receipt as you may be asked to provide a copy for proof of purchase Hideki Electronics Inc reserves the right to repair or replace the product at our option Copyright 2005 Hideki Electronics Inc All Rights Reserved The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc Honeywell International Inc makes no representations or warranties with respect to this product
5. is sufficient enough to keep the accuracy reading within second 9 Make sure the main unit is positioned at 8 feet minimum distance from any interference source such as a TV computer monitor microwave etc The successful reception of the atomic time signal depends on the positioning and location of the clock Always place the main unit by the window for better reception Within concrete wall rooms such as basements or office buildings the received signal may be weakened Always place the unit near the window MAXIMUM AND MINIMUM TEMPERATURES The maximum and minimum record of the indoor and remote temperature will be automatically stored in the memory of the main unit receiver Main unit will display the minimum maximum and the current reading upon each press the CHANNEL and W at the same time The unit will return to the current temperature display in 15 seconds To clear the memory press and hold CHANNEL for 3 seconds and all stored readings will be erased TEMPERATURE TRENDS The temperature trend indicator shows the trend of temperatures collected at particular remote sight There are three trends will be shown rising steady and falling Arrow indicator pi Temperature Falling Trend 10 WEATHER FORECAST The Weather Forecaster is capable of detecting atmospheric pressure changes Based on collected data it forecasts the weather for the next 12 to 24 hours The weather f
6. ged batteries and damaged parts 4 Do not tamper with the units internal components Doing so will invalidate the warranty and may cause damage These units contain no user serviceable parts Use only fresh batteries Do not mix new and old batteries Read the user s manual thoroughly before operating the units aun 16 SPECIFICATIONS Temperature Measurement Main unit Indoor Temperature Proposed operating range 2 5 C to 50 C 23 F to 122 F Temperature resolution 2 0 1 C 0 2 F Remote Sensor Proposed operating range with alkaline batteries 20 C to 70 C 4 F to 158 F Proposed operating range with lithium batteries 38 F to 158 F 38 8 C to 70 C Temperature resolution 2 0 1 C 0 2 F RF Transmission Frequency 433 MHz Maximum number of Remote sensors 23 RF Transmission Range Maximum 100 feet Temperature sampling cycle approximately 45 seconds Calendar and Clock 12 hour display in hh mm format Date Format Month Day format Day of week User selectable in 3 languages English Spanish French Dual 4 minute crescendo alarm with snooze Pre alarm for ice alert with programmable time intervals Blue Backlight Power Main unit 2 x UM 3 AA 1 5V batteries alkaline are suggested not included AC DC Adapter AC120V 60Hz DC6 0V 120mA Remote Sensor 2 x UM 3 AA 1 5V batteries alkaline are suggested not included 17 Dimensions Main
7. icon on the main unit s display located near the remote sensor reading line indicates a good reception from the remote sensor If the temperature goes above or below the temperature operating range stated in specifications the display will show dashes READING THE KINETIC WAVE DISPLAY The kinetic wave display shows the main unit receiver signal reception strength The unit is in searching mode Temperature readings securely registered No signals WWVB RADIO CONTROLLED TIME The NIST National Institute of Standards and Technology radio station is located in Ft Collins Colorado It transmits an exact time signal continuously throughout the continental United States at 60 KHz frequency The Color Weather Forecaster with Indoor Outdoor Thermometer can receive this WWVB signal through its internal antenna from up to 2 000 miles away Due to the nature of the Earth s ionosphere reception can be limited during the daylight hours The radio controlled clock will search for an alternate station that derives its signal from the NIST Atomic clock in Boulder Colorado The WWVB tower icon on the main unit s display will flash indicating radio signal reception from the WWVB station If the tower icon is not fully lit or if the time is not set automatically please consider the following During night time hours atmospheric disturbances are typically less severe and reception may improve A single daily reception
8. n of the signal 4 Remove the batteries from the main unit and reinstall them in the same manner 5 On the main unit select the same channel number as set on the remote sensor Outdoor temperature on the display will show that transmission is being received successfully TRANSMISSION COLLISION Signals from other household devices such as doorbells home security systems and entry controls may interfere with this product and may cause temporary reception failure This is normal and will not affect the general performance of the product The transmission and reception of temperature readings will resume once the interference subsides 13 HOW TO SET THE RADIO CONTROLLED CLOCK 1 After the main unit receives temperature readings from the remote sensor s the WWVB time signal receiver will automatically search for the time signal This takes about 5 8 minutes Always place the main unit by the window for better reception 2 If the radio signal is received the date and time will be set automatically and the icon will appear 3 If after 8 minutes the time signal has not been received press the MODE button to set the time manually The clock will continue to search for the WWVB time signal daily from 1 00 am to 4 30 am When the signal has been successfully received the time and date will be updated automatically CALENDAR AND CLOCK DISPLAY MODES The date is displayed in month date format Each press of the MODE bu
9. nel selection Honeywell uom Paras A LED INDICATOR Flashes once when the remote sensor transmits a reading to the main unit Flashes twice indicating low battery BATTERY COMPARTMENT Holds two AA size batteries RESET Resets all previous settings CHANNEL SELECTOR Selects the desired channel before installing batteries WALL MOUNT RECESSED HOLE Keeps the remote sensor on the wall C F SWITCH Selects the temperature display in Fahrenheit or Celsius BEFORE YOU BEGIN 1 2 3 We recommend using alkaline batteries for the main unit and remote sensor Avoid using rechargeable batteries Insert batteries before first use matching the polarity as shown in the battery compartment Always install batteries in the remote sensor before the main unit Press RESET after each battery change using paper clip or similar tool During an initial setup place the main unit as close as possible to the remote sensor After reception is established remote temperature will appear on the receiver s display position the remote sensor and main unit within the effective transmission range of 100 feet NOTE l 2 Avoid setting the time and date on the main unit before the outdoor temperature is displayed The effective operating range may be influenced by the surrounding building materials and how the receiver and transmi
10. orecast is shown in fun cartoon characters on the main unit s color display When the display shows When the display NOTE 1 The weather forecast accuracy is approximately 70 2 Display shows forecasted not current conditions 3 The Sunny icon indicates clear weather even when displayed during night time BAROMETRIC PRESSURE The barometric pressure arrows indicate if pressure is rising steady or falling Arrow indicator pi Pressure Trend Falling 11 BAROMETRIC PRESSURE HISTORY CHART A Displays barometric pressure history for the past 24 hours in chart format B Displays barometric pressure in numerals inHg mmHg or mb hPa ALTITUDE ADJUSTMENT Allows entering altitude in feet or meters Press and hold TOGGLE key along with UNIT simultaneously for 2 3 seconds Altitude adjustment screen will appear on the color display for 8 9 seconds Press TOGGLE key to increase altitude Press UNIT key to decrease altitude If none of these keys pressed during 5 second period display will return to the original display and the last altitude setting will be stored in memory automatically NOTE All of the historical pressure data will be cleared once an altitude has changed The main unit s color display can be set for two modes default TOGGLE and SINGLE DEFAULT TOGGLE MODE Toggles between cartoon animated color weather forecast and barometric pressure hist
11. ory chart with 10 seconds delay After AC adapter is connected the TOGGLE mode will be activated automatically SINGLE DISPLAY MODE Shows only when selected by the user by pressing TOGGLE button 1 Weather forecast with animated cartoon images 2 Barometric pressure history in chart format for the past 24 hours with pressure in numerals LOST COMMUNICATION If the main unit display for the remote sensor goes blank press and hold W button for 2 seconds to begin a new signal search If the signal still isn t received please make sure that 1 The remote sensor is in the proper location 2 The distance between the main and remote units is not over 100 feet 3 The path between units is clear of obstacles Shorten the distance between units if necessary 4 Fresh batteries are installed correctly in both remote sensor and main units Note When the temperature falls below freezing the batteries in outdoor remote sensor s may have reduced voltage supply and a shorter effective range We recommend to If everything listed above is in order and there is no reception anyway please perform the following steps 1 Bring main unit and remote sensor close together 2 Remove 4 small screws from the back of the remote sensor and open the battery compartment 3 Remove the batteries from the battery compartment and reinstall them in the same manner Remote sensor LED indicator will flash showing transmissio
12. quipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 18 DECLARATION OF CONFORMITY We Name Hideki Electronics Inc Address 7865 SW Mohawk Tualatin OR 97062 Telephone No 1 503 612 8395 declare that the product Product No TE601CELW Product Name Color Weather Forecaster with Wireless Indoor Outdoor Thermometer Manufacturer Hideki Electronics Ltd Address Unit 2304 06 23 F Riley House 88 Lei Muk Road Kwai Chung New Territories Hong Kong is in conformity with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference This device must accept any interference received including interference that may cause undesired operation The information above is not to be used as contact for support or sales Please call our customer service hotline refer to the warranty statement for all inquiries instead STANDARD WARRANTY INFORMATION This product is warranted from the manufacturing defects for one year from date of retail purchase It does not cover damages or wear resulting from accident misuse abuse commercial use or unauthorized adjustment and repair Note that online product registration is required to ensure valid warranty protection To register your product go to our Company website at www hidekielectronics us
13. ry indicator 4 will appear on the indoor or remote temperature reading line of the main unit warning that the corresponding batteries have to be replaced Once AC DC adapter is connected the Color display will toggle TOGGLE mode between the following modes mb hPa 1234567890 inHg ye Z 3 g 24 20 16 12 8 44 0 After the AC DC adapter is connected to the main unit the color LCD will be activated It will toggle with 10 seconds delay between barometric pressure history chart and cartoon animated weather forecast The main unit can be programmed to display just one of the above HOW TO USE THE TABLE STAND The main unit has a removable transparent table stand which supports the unit on the flat surface The remote sensor can be mounted on the wall using wall mount recessed hole or placed on a flat surface GETTING STARTED After batteries are installed remote sensor s will transmit a temperature readings at 45 second intervals The main unit may take up to 2 minutes to receive the initial readings Upon successful reception remote temperature will be displayed The main unit will automatically update readings at 45 second intervals If no signals are received from the remote sensor s within 2 minutes dashes 77 will be displayed Press and hold W button on the main unit for 2 seconds to initiate another signal search CHECKING REMOTE AND INDOOR TEMPERATURES The wave
14. tter are positioned 3 Position the remote sensor so that is faces the main unit receiver minimizing obstructions such as doors walls and furniture 4 Though the remote sensors are weather resistant they should be placed away from direct sunlight rain or snow BATTERY INSTALLATION REMOTE SENSOR NOTE Install the batteries select the channel and type of temperature C F before you mount the sensor 1 Remove the screws from the battery compartment with a small Phillips screwdriver 2 Set the channel The switch is located in the battery compartment Channel is typically selected if only remote sensor is being used 3 If you are using more than one sensor select a different channel for each sensor 4 Install two AA size alkaline batteries not included matching to the polarities shown in the battery compartment 5 Replace the battery compartment door and secure the screws 6 Secure the remote sensor in the desired location BATTERY INSTALLATION MAIN UNIT 1 Open the battery compartment door 2 Install 2 batteries UM 3 or AA size 1 5V matching the polarity as shown in the battery compartment 3 Replace the battery compartment door 4 Connect the 6V AC DC adapter to activate the Color LCD display NOTE AC DC adapter should be connected at all times even during the battery replacements otherwise barometric pressure history will be lost LOW BATTERY WARNING A low batte
15. tton will change the clock display setting between the time with the seconds and the time with the day of week MANUAL SETTINGS TIME ZONE 1 Select the time zone by pressing and holding the A button for 3 seconds 2 Keep holding until the desired time zone Pacific Mountain Central or Eastern is selected on the display map 3 Press MODE to confirm selected Time Zone YEAR DATE TIME TEMPERATURE UNIT Press and hold MODE for 3 seconds the year will flash Press A or W to change the flashing digits After the first value is set press MODE again Continue setting day month hour minutes weekday language and Fahrenheit or Celsius display When you ve set the last value press MODE for the last time to return to regular mode 14 SETTING THE ALARM To set any alarm 1 Press ALARM once to display alarm time If the alarm is off OFF will be displayed 2 Press and hold ALARM for two seconds The hour digit will flash Enter the hour using W or A Press ALARM again The minute digits will flash Enter the minutes using W or A Press ALARM again to exit Repeat the same procedure to set any of alarms weekly daily or pre alarm NDP SNOOZE When the alarm sounds press the SNOOZE LIGHT button to temporarily stop the alarm If not disabled the alarm sound will resume after 5 minutes If the alarm is not disabled after that it will sound for
16. unit 2 8 L x 7 09 H x 2 8 D Remote sensor 2 38 L x 4 H x 1 D FCC STATEMENT This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Warning Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment had been tested and found to comply with the limits for a Class B Digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the e
Download Pdf Manuals
Related Search