Honeywell HZ-336 User's Manual
Contents
1. to change to Low Power Continu ous Run e Press Power a third time to turn the heater off MODE SET TEMPERATURE Set Temperature Adjust Up or Down Basic Remote LCD Remote e Press Mode until the Temperature icon blinks The current room temperature will appear e Use the Up or Down arrows to set the desired temper ature e The Temperature icon will stop blinking and the current room temperature will reappear after the desired tem perature is set e The heater will turn off shortly after the desired tem perature is reached and the Power light above the dis play will blink e The heater will turn back on when the room tempera ture drops approximately 2 degrees below the desired temperature The Power light will stop blinking and will remain lit MODE SET TIMER Set Timer Basic Remote LCD Remote e Press Mode until the Timer icon blinks The Hour dis play will appear e Use the Up or Down arrows to set an operation time between 1 and 10 hours e The heater will turn off when time runs out OSCILLATION Oscillation Basic Remote LCD Remote e The Oscillation feature functions in any power or mode setting e Press the Oscillation button to toggle this feature on and off TROUBLESHOOTING If your heater shuts off unexpectedly safety fea tures may have been activated to prevent over heating If this happens e Be sure the power cord is plugged into a work ing electrical outlet e C2. 6 series heater is compati ble with both the Basic and Digital LCD Remote Control To upgrade your heater or to get a list ing of heater accessories visit our website at www honeywellconsumerproducts com ELECTRICAL RATING This product is rated 12 5 Amps 1500 Watts at 120 VAC 60 Hz 5 YEAR LIMITED WARRANTY You should first read all instructions before attempting to use this product Register your product on line at www honeywellconsumerproducts com or complete and return the Customer Response Card within 7 days A This 5 year limited warranty applies to repair or replacement of product found to be defec tive in material or workmanship This warranty does not apply to damage resulting from com mercial abusive unreasonable use or supple mental damage Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty e HONEYWELL IS NOT LIABLE FOR INCI DENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ANY IMPLIED WAR RANTY OF MERCHANTABILITY OR FIT NESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you also may have other rights which vary from jurisdic tio
3. Honeywell IMPORTANT SAFEGUARDS READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS HEATER When using electrical appliances basic precautions should always be followed to reduce the risk of fire electric shock and injury to persons including the following IMPORTANT INSTRUCTIONS Read all instructions before using this heater 2 This heater is hot when in use To avoid burns do not let bare skin touch hot surface If provided use han dies when moving this heater Keep combustible materials such as furniture pillows bedding papers clothes and curtains at least 3 feet 0 9 m from the front of the heater and keep them away from the sides and rear Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended Always unplug heater when not in use Do not operate any heater with a damaged cord or plug or after the heater malfunctions has been dropped or damaged in any manner Return heater to authorized service facility for examination electri cal or mechanical adjustment or repair Do not use outdoors This heater is not intended for use in bathroom laun dry areas and similar moist indoor locations Never locate heater where it may fall into a bathtub or other water container 8 Do not run cord under carpeting Do not cover cord with throw rugs runners or the like Arrange cord away from traffic areas w
4. are used or stored 16 Use this heater only as described in this manual Any other use not recommended by the manufac turer may cause fire electric shock or injury to per sons 17 Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire However if you have to use an extension cord the cord shall be No 14 AWG minimum size and rated not less than 1875 watts 18 The output of this heater may vary and its tempera ture may become intense enough to burn exposed skin Use of this heater is not recommended for per sons with reduced sensitivity to heat or an inability to react to avoid burns i SAVE THESE INSTRUCTIONS BASIC CONTROL PANEL OPERATION POWER Ri Continuous Run av High Power Je Low Power Q Ov Q c Power nae O e Press Power once to start the heater on High Power Continuous Run e Press Power again to change to Low Power Continuous Run e Press Power a third time to turn the heater off MODE SET TEMPERATURE Set Temperature Power Mode e Press Mode until the Temperature icon blinks The current room temperature will appear e Use the Up or Down arrows to set the desired tem perature e The Temperature icon will stop blinking and the cur rent room temperature will reappear after the desired temperature is set e The heater will turn off shortly after the desired tem perature is reached and the Power light above the display wil
5. heck your thermostat setting The unit may simply be off because you have reached your desired heat setting e Check for any obstructions If you find one turn the heater OFF and unplug it Wait at least 10 minutes to allow the heater to cool completely before removing any obstruction When done plug in the heater and follow the OPERATION INSTRUCTIONS For more troubleshooting tips visit our website at www honeywellconsumerproducts com NOTE IF YOU CONTINUE TO EXPERIENCE A PROBLEM PLEASE RETURN THE HEATER TO THE PLACE OF ORIGINAL PURCHASE OR SEE YOUR WARRANTY DO NOT ATTEMPT TO OPEN THE HEATER YOURSELF DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HEATER OR PER SONAL INJURY IF YOU HAVE ANY QUES TIONS REGARDING THIS HEATER PLEASE CALL OR WRITE Honeywell Consumer Relations Department 250 Turnpike Road Southborough MA 01772 Toll Free 1 800 332 1110 E mail honeywell protocolusa com CLEANING AND STORAGE We recommend that the heater be cleaned at least once a month and before off season stor age e Turn the heater OFF and unplug it Allow it to cool completely e Use only a dry cloth to clean the external sur faces of the heater DO NOT USE WATER WAX POLISH OR ANY CHEMICAL SOLU TION e Clean your heater using the above mentioned steps then pack the heater in its original con tainer and store it in a cool dry place e This heater does not disassemble ACCESSORIES Your HZ 335 or HZ 33
6. here it will not be tripped over 1 _ oe DA o1 N O DIGITAL CERAMIC HEATER HZ 335 HZ 336 Series 9 This appliance has a polarized plug one blade is wider than the other To reduce the risk of shock this plug is intended to fit only one way in a polarized outlet If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a quali fied electrician DO NOT attempt to defeat this safety feature 10 This heater draws 12 5 amps during operation To prevent overloading a circuit do not plug the heater into a circuit that already has other appliances work ing 11 It is normal for the plug to feel warm to the touch however a loose fit between the AC outlet recepta cle and plug may cause overheating and distortion of the plug Contact a qualified electrician to replace loose or worn outlet 12 To disconnect the heater first turn controls to the OFF position then grip the plug and pull it from the wall outlet Never pull by the cord 13 Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater 14 To prevent a possible fire do not block air intakes or exhaust in any manner Do not use on soft surfaces like a bed where openings may become blocked 15 A heater has hot and arcing or sparking parts inside Do not use it in the areas where gasoline paint or flammable liquids
7. l blink e The heater will turn back on when the room temper ature drops approximately 2 degrees below the desired temperature The Power light will stop blinking and will remain lit MODE SET TIMER Timer Power Mode e Press Mode until the Timer icon blinks The Hour display will appear e Use the Up or Down arrows to set an operation time between 1 and 10 hours e The heater will turn off when time runs out FAHRENHEIT CELSIUS Power Mode Q O F C Temperature Display e F C feature functions from only the Power or Set Temperature screens e Press the F C button to toggle between Fahrenheit and Celsius OSCILLATION Power Mode Oscillati e The Oscillation feature functions in any power or mode setting e Press the Oscillation button to toggle this feature on and off REMOTE CONTROL OPERATION HZ 336 SERIES Two 2 AAA batteries required Model HZ 336 Remote Control included when originally pur chased Model HZ 335 Remote Control may be purchased separately at www honeywellconumerproducts com The Remote Control works the same as the cor responding buttons on the Control Panel The Control Panel display on the heater will show the appropriate icons when the various functions are activated POWER High Power A Low Power n Basic Remote LCD Remote e Press Power once to start the heater on High Power Continuous Run e Press Power again
8. n to jurisdiction This warranty applies only to the original purchaser of this product from the original date of purchase B At its option Honeywell will repair or replace this product if it is found to be defective in material or workmanship Defective product should be returned to the place of purchase in accordance with store policy Thereafter while within the warranty period defective product may be returned to Honeywell C This warranty does not cover damage result ing from any unauthorized attempts to repair or from any use not in accordance with the instruction manual D Return defective product to Honeywell Con sumer Products with a brief description of the problem Include proof of purchase and a 10 US 14 50 CAN check or money order for han dling return packing and shipping charges Please include your name address and day time phone number You must prepay shipping charges Send to In the US Honeywell Attn Returns Department 4755 Southpoint Drive Memphis TN 38118 USA In Canada Honeywell Attn Returns Department 510 Bronte Street S Milton ON LOT 2X6 Canada
Download Pdf Manuals
Related Search