Hobart PRIME 873440 User's Manual
Contents
1. continued 4 Assemble the Hollymatic model 120 bulker to the Pedestal To fasten the bulker to its pedestal insert the pin through the hole in the bracket The bulker can swivel 360 Reassemble paper roll Fig 3 5 Assemble the bulker adapter to the bulker input tube using the clamp provided with the Hollymatic Bulker Fig 4 6 Assemble the Tightening Ring shipped with the Hollymatic Bulker to the cylinder of the Hobart Mixer Grinder Fig 5 A second clamp also sourced from Hollymatic Fig 5 must be used to clamp the Bulker Adapter to the Tightening Ring When making the final linkup of the Hollymatic model 120 Bulker to the Hobart Mixer Grinder the height of the Bulker may need to be adjusted The Bulker Adapter can be swiveled to allow the final adjustment before locking the clamps in place FORM 34483 May 2000 PAPER ROLL PL 41439 1 Fig 3 BULKER ADAPTER PL 41440 1 PL 41441 1 Fig 5 2 PRINTED IN U S A2. ASSEMBLY INSTRUCTIONS Adapter KIT NO 873440 For Hobart PRIME Mixer Grinders with 15 incline cylinder and Hollymatic model 120 Bulker PART NO NAME OF PART AMT 873440 Adapter Kit complete 0 ccccceceeeeeeeeeeeeeeeeeeneeeeteeaes 1 873430 Adapter BuUlker eccciscsncusnepawnshbaxtetsmetascegaseniusenesinalganinjaseastearaseds 1 873437 Long S pport AO sessies tekerni ie Eann EE ERE 1 F 34483 Assembly IMSUUCTIONS ic cocsevivsstserescwebedetnsastadeiceeentelatetannninnueee 1 ASSEMBLY WARNING DISCONNECT ELECTRICAL POWER OE PER ROLL 1 Remove the paper roll from the Hollymatic Model 120 Pull the pin out of the bracket underneath the bulker Remove the Bulker from its pedestal by lifting straight up Carefully set the Hollymatic Model 120 Bulker on its side Fig 1 BRACKET PL 41437 1 2 Unscrew the height adjustment screw and remove the support rod from the pedestal The long rod from the kit must be used with the Hobart PRIME Mixer Grinder LONG SUPPORT ROD i HEIGHT ADJUSTMENT SCREW 3 Assemble the Long Support Rod b p from the kit into the pedestal j PEDESTAL base making sure the grooved part of the Support Rod is up Re tighten the height adjustment screw so the support rod is stable Fig 2 N PL 41438 1 Fig 2 HOBART CORPORATION 701 S RIDGE AVENUE TROY OHIO 45374 0001 937 332 3000 www hobartcorp com FORM 34483 May 2000 ASSEMBLY
Download Pdf Manuals
Related Search