Hitachi L32N03A User's Manual
Contents
1. Picture Mode Dynamic Select the most suitable picture mode according to Natural your lighting condition Cinema Favorite Contrast Adjust to increase or decrease the picture contrast Brightness Adjust to brighten or darken the picture Color Adjust to increase or decrease the color intensity Sharpness Adjust to sharpen or soften the picture Color Temperature Cool Select the most suitable settings depending on your Normal preferred color tone Warm Tint Adjust to obtain natural skin color Digital Noise Reduction Off Set to reduce noise in the picture due to weak Low signal condition Middle High Contrast Mode Dynamic Select Dynamic to sharpen the graduation to Normal improve the contrast feeling Power Save Off Select the power save mode to reduce the power Low consumption of the TV High Back Light Adjust the brightness of the back light for maximum visibility e Digital Noise Reduction is only available in TV mode e Tint can only be selected and adjusted when receiving NTSC broadcast Audio Menu ofofofofy Treble Bass Balance Perfect Volume Speakers TV Speakers E Select W Set MENU Return Selected Items Setup Hints Sound Mode Movie Select the most suitable sound mode according to Music your watching contents Speech Favorite Treble Adjust the high pitched sound Bass Adjust the low pitched sound Balance Adjust the left and right sound chan2. Select Wy Set MENU Return Selected Items Setup Hints PIN Enter the password for Parental Control e The factory default password is 0000 In case you have forgotten your password enter 9999 to access Parental Control and set a new Select WT Set MENU Return password Lock TV Setup On Select On to lock Setup in TV mode Off Select Channel Select the channel for Lock Channel Lock Channel On Select On to lock the Select Channel Off Lock Panel Keys On Select On to disable the buttons on the TV Off INI If Lock Panel Keys is set to On you can access the TV by remote control unit only Enter New PIN Enter and confirm the password for Parental Confirm New PIN Control e Lock TV Setup Select Channel and Lock Channel are only available in TV mode Setup Menu TV Mode Manual Tuning Program Sorting Position Favorite Channels Name Sound System Color System Select Ww Set MENU Return Selected Items Setup Hints Auto Tuning Tune for all the available channels automatically When auto search is completed the TV will automatically return to Channel 1 Select Wr Set MENU Return Manual Tuning Set the frequency of the channel Position Set the channel number Name Set a name for the channel 1 Press OK to enter Press A W to enter the desired charac
3. Check the value level of Brightness and Contrast in PICTURE menu Multiple images normal sound Check the antenna connection and direction e Fine tuning the TV Check the connection of the external equipment e The TV station may have broadcast difficulties Try another channel Snowy picture poor sound e Check the antenna connection and direction e The TV station may have broadcast difficulties Try another channel Intermittent interference Check if the source of interference is shield well e Remove those kinds of electrical devices away from the TV Poor stereo sound e The TV station may have broadcast difficulties Try to change to mono mode Remote control does not work e Check if the batteries are installed correctly e The batteries may be exhausted Replace them with new ones Remove all obstruction between the remote control and the remote control sensor e Ensure there is no strong light shinning on the remote control sensor No Signal appears on the screen The TV cannot detect any signals from any input terminals Check if the cable is connected correctly and firmly e Check if the power of any external equipment is turned on e Check if the input source selection is correct Unsupported Signal appears onthe Check if the display resolution and frequency from your PC screen RGB mode only is a valid mode for the TV Refer to the recommended RGB input signal chart Image n
4. To select bilingual sound program When a bilingual program is received T appears on the screen Press I I to select the sound to be heard For High Definition HD Pictures 720p 1080i 1080p Q Display a 16 9 picture in 95 of the q size Full1 Display a 16 9 picture in its original size O_O Full2 J Stretch a 4 3 picture horizontally to fill the 16 9 screen 0 Q hN A d 4 3 Zoom For RGB Input OC Stretch a 4 3 picture horizontally to fill M the 16 9 screen K AJ l ss Ful N Main Sub Language Language Mode CD I I e Select W in case of poor reception noise or poor stereo sound due to signal condition so that you can receive a clear mono sound Stereo Audio Signal Picture Size Selection Depending on the input signal you can select the desired picture size by pressing amp repeatedly For Standard Definition SD Pictures 480i 480p 576i 576p Automatically adjust the aspect ratio based on the TV program signal TOL Stretch a 4 3 picture horizontally to fill BSA the 16 9 screen CNC Display a 4 3 picture in its original 1 J size Black bars appear on both left ONA 43 and right sides Enlarge a 4 3 picture linearly from the center towards the edges of the lt display O Display a 16 9 picture in 4 3 frame b q Vista size Display a 21 9 picture in 4 3 frame C
5. 2 Press the CYAN button and press OK e The skipped channel is indicated by cyan You can still select a skipped channel using the Program Select buttons To unskip the channel select the channel and press the CYAN button Favorite Channels Assign your most frequently view channels as your favorite channels Setup Menu RGB Mode BAS H Position V Position H Clock Clock Phase Select W Set MENU Return Selected Items Setup Hints Auto Adjust Auto adjust the screen position clock and phase H Position Adjust the picture horizontal position V Position Adjust the picture vertical position H Clock Adjust the picture width Clock Phase Adjust to remove the horizontal interference J Auto Adjust may not work well with certain input signals In such cases manually adjust H Position V Position H Clock and Clock Phase 20 Troubleshooting Before calling service personnel please check the following troubleshooting guide If any problem still persists unplug the TV set and call for servicing Symptom Check List No picture no sound e Check if the main power of the TV is turned on e Check the connection of the power cord and or other cables Normal picture no sound Check the volume level Check if the X button has been pressed or not Check the connection of the external equipment Poor color or no color normal sound
6. Press to activate or exit Multi Picture mode Auto Adjust AUTO Press to adjust the picture automatically in RGB mode Press to view the preset favorite channels in TV mode e You need to preset the favorite channels in the SETUP menu to enable this function Program Select Page Select Press to select the TV channel directly Recall RECALL Press to show input signal status Digit This button is not available for this model Menu Press to enter or exit from the TV menu 9 Program Up Down Page Select P P Press to select previous next channel Up Down Cursor A Y Press to select or adjust the desired item on the TV menu O rvex S color cancel amp index ED Picture Mode 0 Press to select the desired picture mode sound Mode A Press to select the desired sound mode Sleep Timer Press to set the time to switch the TV to standby mode To cancel Sleep Timer press repeatedly until Min appears To display the remaining time press once If you switch off the TV and turn it on again Sleep Timer is reset to Min During the last 10 seconds of the Sleep Timer setting an on screen countdown will be displayed Pressing any button on the remote control or TV during the countdown will cancel the Sleep Timer ch m 1 1 Press to select audio language or
7. sound output when receiving a bilingual or stereo program respectively Last Channel LST CH Press to return to previously viewed channel Mute 7X Press to mute or restore the volume OK Subpage OK Press to confirm and execute the selection Volume Up Down tad lt a Press to adjust the volume Left Right Cursor lt gt Press to select or adjust the desired item on the TV menu Freeze Hold 4 Press to freeze or unfreeze the picture Subtitle C Reveal D Direct Input Select Press to select the input source directly Connections You can connect VCR DVD player set top box computer game console or other video equipment to the TV To view external source images press to select the input source or Direct Input Select buttons to select the input source directly Connect via HDMI In Example VCR Hom DVD Player a O08 E 222 Lhi Hom a Sih Connect via Component Video In os a as Set Top Box Connect via Composite Video In he coo Game Console Homi a Connect via RGB In Example Hom a DM Computer Connect via Composite Video Out d Example Recordi
8. 25 18 SVGA 800 x 600 60 37 88 40 00 XGA 1024 x 768 60 48 36 65 00 SXGA 1280 x 1024 60 63 98 108 00 e f the message Unsupported Signal appears on the screen adjust the PC display setting as in the above chart Modes that are not listed in the above chart may not be supported For an optimal picture it is recommended to choose a mode listed in the chart e Sometimes the image may be disrupted due to the frequency standard from the VGA card This is not an error You may improve this situation by pressing the AUTO button or adjusting the position clock and phase settings in the SETUP menu manually e If you switch off the TV interference lines may occur on the TV screen This is normal HDMI Input Signal Chart Resolution Vertical Horizontal Dot Clock Frequency Hz Frequency kHz Frequency MHz VGA 640 x 480 60 31 47 25 18 SVGA 800 x 600 60 37 88 40 00 XGA 1024 x 768 60 48 36 65 00 576i 720 1440 x 576 50 15 63 27 00 480i 720 1440 x 480 60 15 73 27 00 576p 720 x 576 50 31 25 27 00 480p 720 x 480 60 31 47 27 00 1080i 50 1920 x 1080 50 28 13 74 25 1080i 60 1920 x 1080 60 33 75 74 25 720p 50 1280 x 720 50 37 50 74 25 720p 60 1280 x 720 60 45 00 74 25 1080p 50 1920 x 1080 50 56 25 148 50 1080p 60 1920 x 1080 60 67 50 148 50 1080p 24 1920 x 1080 24 27 00 74 25 23 HITACHI Inspire the Next
9. HITACHI Inspire the Next LCD Color Television User Manual L42N03A L32N03A N m Thani series r Shs n the best perfor sae afety please read this manual carefully Plea e kee ep this manu al fo r fut reference a ee u for purchasi a HITACHI pro rodu a Thank you for purchasing this HITACHI LCD Color Television The instructions in this manual are described mainly with the remote control You can also use the buttons on the TV if they have the same names as those on the remote control To obtain the best performance and safety please read this manual carefully Please keep this manual for future reference Important Safety Instructions 3 Teletext Operation 13 Supplied Accessories 4 Menu Operation 14 Picture Menu 14 Preparation 5 Audio Menu 15 Stand Installation 5 et pete He ae ve ile for Wall Mounting z Setup Menu TV Mode 18 ositioning the et Antenna an Power Connections 6 Setup Menu RGB Mode 20 Securing the TV Set 6 Remote Control Batteries Installation 6 Troubleshooting 21 Functional Overview 7 Specification 22 Front Panel 7 Recommended Signal List 23 Side Panel 7 Rear Panel 8 Remote Control 9 Connections 10 Basic Operation 11 Power On Off 11 Channel Selection 11 Input Source Selection 11 Volume Adjustment 11 On Screen Display Selection and Adjustment 11 Stereo Bilingual Sound Selection 12 Picture Size Selection 12 Multi Picture Mode Selection 12 Important Safety Instructions 1 Read Instruction
10. been dropped or damaged in any way f When the product exhibits a distinct change in performance this indicates a need for service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any service or repairs to the product ask the service technician to perform safety checks to determine that the product is in proper operating condition Heat Do not install the product near any heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat 21 22 23 Installation Location Place the product on a firm and flat surface Avoid placing the product in areas of direct sunlight heating radiators closed automobiles high temperature high humidity excessive dust strong vibration impact or strong magnetic fields as the internal parts may be seriously damaged Hazards of Electrical Shock and Fire Do not touch the power cord with wet hands Hold the plug when disconnecting the power cord Do not pull the power cord Unplug the power cord from the wall outlet when the product is not used for long periods of time Hearing Safety Listen at a moderate volume Using headphones at high volume can impair your hear
11. can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into the product through any openings as they may touch dangerous voltage points or short out parts that can result in a fire or electric shock Never spill liquid of any kind on the product Servicing Do not attempt to service the product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Repairing Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust 18 19 20 only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a service technician to restore the product to its normal operation e Ifthe product has
12. inema size expanding vertically Q Display a 4 3 picture in its original N J size Black bars appear on both left oi 43 and right sides In some cases the screen display may has slight blanking or noise at the edges Multi Picture Mode Selection Multi Picture Mode allows you to Sub view two pictures from different sources on the same screen simultaneously Main 1 Press OB to activate Multi Picture Mode m PIP screen displays The speaker icon 9 will be displayed on the screen with sound output 2 Press amp to switch sound output between the main and sub screen Press J repeatedly to select the input source TV AV1 AV2 or AV3 Press P P or Program Select buttons to select the TV channel Press CB to exit Multi Picture Mode e The main screen picture is only available for AV4 RGB HDMI1 3 and the sub screen picture is only available for TV AV1 3 Teletext Operation Teletext is a free service broadcast provided by most TV stations It provides information on the current affairs news weather forecasts program previews stock market report and many other topics TVVIDEO PSIZE PMODE S MODE SLEEP 0000 HITACHI Page Select Press to select a Teletext page Enter 3 digits Page Select A V Press to move to the next or previous Teletext page Ortvrext 8 Press to enter Teletext mode P
13. ing e Sometimes the LCD screen may have some tiny red blue white or black spots This is normal and does not affect the performance The main power plug is used as the disconnect device and shall remain readily operable Supplied Accessories Check the supplied accessories before installation In case of missing or damaged please contact the dealer immediately User Manual AAA Batteries Remote Control TV Stand For TV stand For wall mount installation bracket installation e Please store the screws that are not used Screws M4x12 Screws M6x12 Stand Installation Detaching the TV Stand for Wall Mounting Carefully place the TV with its front side Before mounting the TV on the wall the TV stand facing down on a must be removed oO cushioned flat surface Slee ce e Fasten the wall bracket to the TV using the supplied ee ae M6x12 screws e For wall bracket installation refer to the wall bracket instruction guide Attach the TV stand to the TV as shown Tighten the supplied M4x12 screws to fix the TV stand securely in place The TV stand may not be securely fixed in place after repeated tightening and loosening the screws NA NSINIINE During assembling and disassembling the TV stand please use your hand to support it Failing to do
14. mpartment Slide close the battery compartment cover until it clicks J The remote control can be used within the range of 8 meters and about 15 in each direction from the front of the remote control sensor Make sure there is no obstacle between them e If the remote control is not used for a long period of time remove the batteries to prevent battery leakage Functional Overview Front Panel See e The front panel buttons are all touch sensitive Touch the sensor located below the marking of the buttons to operate 0 Q Power Indicator Lights up in red when the TV at standby mode Lights up in blue when the TV is turned on Volume Up Down tad Za Press to adjust the volume Volume Up Down buttons also work as Left Right Cursor lt gt on TV menu Program Up Down P P Press to select previous next channel Program Up Down buttons also work as Up Down Cursor A W on TV menu Menu Press to enter or exit from the TV menu Input Select Press to select TV AV1 AV2 AV3 AV4 RGB HDMI1 HDMI2 or HDMI3 mode Power On Standby Press to turn the TV on or standby Remote Control Sensor Receives signal from the remote control Side Panel voeo AV3 Input terminals Connect to equipment with audio composite video output Head Ph
15. nel volume Perfect Volume On Select On to automatically adjust the volume to its Off average level each time you change the channel Speakers TV Speakers Select TV Speakers to listen through the TV Audio System speakers Select Audio System to listen through your external audio equipment connected to the output terminals on the rear panel e Perfect Volume is only available in TV mode Function Menu Bee Film Mode On Menu Background Opaque Teletext Language West Europe Decorative Light On Reset Favorite Select Wr Set MENU Return Selected Items Setup Hints Language English Select the on screen display language fii Asef SAR Pycckun ae Film Mode On Select On for movie film detection and correction Off Select Off if the picture does not look natural Menu Background Opaque Select the menu background Transparent Teletext Language West Europe Select the desired Teletext language East Europe Russian Arabic Decorative Light On Select On to turn on the decorative light on the Off front panel of the TV Reset Favorite Reset all Favorite to the original factory settings e Teletext Language is only available in TV mode The items indicated by may not be available for some countries Parental Control Menu Select Channel Lock Channel Lock Panel Keys Enter New PIN Confirm New PIN
16. ng Device nom Mae zE 2 2 Connect via S PDIF Example Hom A SE Amplifier KJ If the external equipment has DVI output you can connect it to the HDMI terminal using a HDMI DVI cable In case of using the HDMI DVI cable connect analog audio signal to RGB Audio Input terminals e Please refer to the user manual of the external equipment for more information on the connection to the TV e Please disconnect all the power supplies to the equipment and TV before connection 10 Basic Operation Power On Off When you switched on power supply of the TV the power indicator lights up in red standby mode To turn on the TV 1 Press D P P or any Program Select buttons m The power indicator lights in blue and the TV turns on To turn off the TV Press 0 1 m The power indicator lights in red and the TV turns off to standby mode e It takes approximately 10 seconds for the picture to appear after the TV is turned on e The TV will switch to standby mode automatically if there is no signal input for 10 minutes for TV and HDMI mode only e If the TV will not be used for a long periods of time unplug the TV from the wall outlet Channel Selection To select a channel Press P P or Program Select buttons to select the channel number directly Input Source Selecti
17. on To select input source Press Press A W to select the desired input source TV AV1 AV2 AV3 AV4 RGB HDMI1 HDMI2 HDMI3 m The selected input source image displays e AV1 4 HDMI1 3 and RGB can be selected directly using the Direct Input Select buttons Volume Adjustment To change the volume Press t to increase the sound volume 2 Press al to decrease the sound volume To mute the sound 0 Press X to temporarily turn off the sound 2 Press X or tad to restore the sound to previous level You can decrease the sound volume by pressing a while the sound is muted On Screen Display OSD Selection and Adjustment 1 Press to display the main menu Press lt gt to select a menu m The selected menu page displays Press A Y to set your selection Press A Y to choose an item on the menu page and press P to set your selection Press lt gt to adjust an item value or choose options O Press to return to the menu press again to exit e The OSD menu screen will be closed automatically when no operation has been made for the set OSD menu display time 11 Stereo Bilingual Sound Selection When receiving stereo bilingual sound system you can select the sound output modes by using I I To select stereo sound program when a stereo program is received CD appears on the screen Press I I to select CD or Y
18. one jack Connect to head phones HDMI3 Input terminal Connect to equipment with HDMI output Rear Panel 0 HDMI1 HDMI2 Input terminal Connect to equipment with HDMI output RGB Input terminal Connect to PC AV2 AV4 Audio Input terminals Connect to equipment with audio output AV4 Input terminals Connect to equipment with component video output AV2 Input terminal Connect to equipment with composite video output S PDIF terminal Connect to equipment with digital audio input Output terminals Connect to equipment with audio composite video input AV1 Input terminals Connect to equipment with audio composite video output Antenna Input terminal Connect to equipment with antenna output or wall antenna socket Remote Control CDCP HITACHI e Some buttons are only use in Teletext mode and other buttons have different functions in Teletext mode from that of TV mode Those buttons are indicated by Refer to Teletext Operation on page 13 Power On Standby Press to turn the TV on or standby Picture Size Press to select the desired picture format Press to select the sound output in Multi Picture mode Input Select Press to select TV AV1 AV2 AV3 AV4 RGB HDMI1 HDMI2 or HDMI3 mode 4 Multi Picture CB
19. ot centered RGB mode only e Adjust the H Position and V Position in the SETUP menu Specification Model Name L42N03A L32N03A Panel Size Approx 42 inches Approx 32 inches Resolution 1920 x 1080 1366 x 768 Power Requirement AC 110 240V 50 60Hz AC 110 240V 50 60Hz Power Consumption 230W 180W Audio Output 10W 10W 10W 10W Dimension WxHxD With Stand 1004 x 684 x 270mm 778 x 560 x 220mm Without Stand 1004 x 637 x 103mm 778 x 512 x 103mm Weight With Stand 19 8kg 11 5kg Without Stand 17 5kg 10 8kg Terminals AV1 VIDEO IN L R AUDIO IN AV2 VIDEO IN L R AUDIO IN AV3 VIDEO IN L R AUDIO IN AV4 COMPONENT IN L R AUDIO IN RGB RGB IN AUDIO IN HDMI1 HDMI IN HDMI2 HDMI IN HDMI3 HDMI IN S PDIF S PDIF OUT OUT VIDEO OUT L R AUDIO OUT Input Signals RF PAL B G D K SECAM B G D K NTSC M Video PAL SECAM NTSC Component 480i p 576i p 720p 50 60 1080i 50 60 1080p 50 60 HDMI 480i p 576i p 720p 50 60 1080i 50 60 1080p 24 50 60 Analog RGB VGA SVGA XGA SXGA 1 These are common audio input terminals for AV2 and AV4 Design and specification are subject to change without notice Weight and dimensions shown are approximate values only Recommended Signal List RGB Input Signal Chart Resolution Vertical Horizontal Dot Clock Frequency Hz Frequency kHz Frequency MHz VGA 640 x 480 60 31 47
20. ress again to superimpose the teletext over the TV program Press again to exit Teletext mode Color buttons Press to a link page displayed at the bottom of the Teletext page Select the corresponding colored page cancel amp Press to return to TV program temporarily while searching for a Teletext page m When the search is done the page number will be displayed on the upper left of the screen Press again to return to the Teletext page Index Press to display index page Subpage OK Press to enter or exit subpage mode if subpage is available Press P P or Page Select buttons to select the desired subpage QO Hold 6 Press to hold the current Teletext page Press again to cancel the hold mode O subtitle 2 Press to access subtitle service directly if the channel has the subtitle service broadcasting Reveal ED Press to display the hidden text e g the answers of puzzles or riddles Press again to close the revealed answer e Teletext function will only operate in countries where Teletext transmission service is available nu Operation Picture Menu Contrast Brightness Color Sharpness Color Temperature v Normal Select WW Set MENU Return Digital Noise Reduction Middle Contrast Mode Dynamic Power Save Back Light Select WW Set MENU Return Selected Items Setup Hints
21. rovided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface The product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to Power Sources The product should be operated only from the type of power source 11 12 13 14 15 16 17 indicated on the marking label If you are not sure of the type of power supply to your home consult your appliance dealer or local power company Power Cord Protection Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance Lightning For added protection for the product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it
22. s All the safety and operating instructions should be read before the product is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed Cleaning Unplug the product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a dry cloth for cleaning Attachments Only use _ attachments accessories specified by the manufacturer Water and Moisture Do not use the product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool etc Accessories Do not place the product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer The product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn Ventilation Slots and openings in the cabinet are p
23. so may cause the TV stand to fall and result in personal injury e After installing the TV stand please ensure that the screws are tightened firmly Failure to do so may cause the TV set to tip over or become damage Positioning the TV Set n Place the TV on a firm and flat surface leaving a space of at least 10cm around the set and 30cm from the top of the set to the wall Antenna and Power Connections AHAATTUAIATTUUATATENNT ODEA ANOTE TVTDOTNVNTUTNUSTTOTTENTTICEETOT IEE HULU OEE Ce 1 Connect the power plug into the wall outlet Connect the antenna cable into the antenna input terminal at the rear panel and wall antenna socket The type of power plug provided may be different from the above picture for some countries Securing the TV Set A Uf z 2 installation screws __ M4 x 20 TV rack The screws should be at least 20mm long and they are available in the market Secure the TV set as shown above using screws that are available in the market e If you do not take the above safety measures the TV set could fail and result in personal injury or physical damage Remote Control Batteries Installation Slide open the battery compartment cover in the direction of the arrow Insert two AAA batteries Make sure the polarity match the indication inside the battery co
24. ters Press gt to move to the next character Press OK when the name is completed The name will be displayed on the screen when the channel is selected Sound System BG Select the appropriate sound system DK M Color System Auto Select the appropriate color system PAL SECAM NTSC3 58 Fine Tuning Fine tune the current channel Press lt gt to decrease or increase the frequency Program Sorting Set the channels according to your preference You can delete copy move or skip the channels you want To delete the channel Press A W to select the channel to be deleted Press the RED button and press OK e The selected channel is deleted all the following channels are shifted up one position Setup Menu TV Mode continue Selected Items Setup Hints Program Sorting To copy the channel 1 Press A W to select the channel to be copied 2 Press the GREEN button Press A W to select the new position for the channel and press OK e The selected channel is copied to the new position and overwrote the existing one To move the channel 1 Press A W to select the channel to be moved 2 Press the YELLOW button Press A W to select the new position for the channel and press OK The selected channel is moved all the following channels are shifted down one position To skip the channel Press A W to select the channel to be skipped
Download Pdf Manuals
Related Search