Henny Penny BW-4/3 User's Manual
Contents
1. OPERATING AND PROGRAMMING INSTRUCTIONS SPECIAL PROGRAMMING 306 Model BW 1 BW 4 BW 4 3 BW 6 BW 8 Due to the lower temperature settings this unit has been de signed to hold NON POTENTIALLY HAZARDOUS FOOD ONLY This unit will NOT hold potentially hazardous food at a safe temperature 1 Turn power switch to the ON position 2 After a sequence of codes the display shows the time of day or ON Press and hold the TEMP button to view the actual temperature of the unit Temperature Setpoint Programming 1 Press and hold the TEMP button for 6 seconds The actual temperature shows first followed by the flashing setpoint temperature 2 While holding in on the TEMP button press and release the SET button Now the setpoint temperature blinks at a faster rate Now release the TEMP button 3 Press the UP and DOWN buttons to change the setpoint temperature 4 Once the desired setpoint temperature preprogrammed maximum temperature is reached press the SET button to return to normal operation mode and the setpoint is saved Time of Day Programming Press and hold the SET button while using the UP and DO buttons to set the desired time When the SET button is re leased the time 1s saved 1 With POWER switch off press and hold both the UP and DOWN buttons and then turn the POWER switch on until SP shows on the display Release the UP and DOWN buttons and F or C shows on the dis2. ot use steel wool other abrasive cleaners or cleaners sanitizers containing chlorine bromine iodine or ammonia chemicals as these will deteriorate the stainless steel material and shorten the life of the unit Do not spray the unit with water such as with a garden hose Failure to follow this caution could cause component failure Clean the interior and exterior of the unit with a soft cloth soap and water 611
3. play 2 Press the UP or DOWN buttons to toggle from F to C or C Celsius to F Fahrenheit ee HENNY PENNY Chlsbal Foodkervice Solutio SPECIAL PROGRAMMING Continued CLEANING INSTRUCTIONS Do Model BW 1 BW 4 BW 4 3 BW 6 BW 8 Press the SET button and CAL shows in the display Press and hold TEMP button and press the UP and DOWN buttons to match the display with the actual temperature Press the SET button and CPU shows in the display Press and hold TEMP button to view the CPU control PCB temperature Press the SET button and OutPutS shows in the display Press the TEMP button to turn the relays display and heaters OFF and ON Press the SET button and In shows in the display Press and hold either the UP or DOWN button until In SYS shows in the display This programs factory settings back into the controls Press the SET button If C y shows in the display the time of day shows in the display during normal operation If C n shows in the display ON shows in the display during normal operation Press the UP and DOWN buttons to toggle from one to the other Turn the unit to the OFF position Disconnect electrical supply to the unit BURN RISK To avoid burns allow the unit to cool before cleaning Open doors and wipe down racks Clean doors with a non abrasive soft cloth and mild soap not use ammonia Do n
Download Pdf Manuals
Related Search