Harbor Freight Tools Stand for Shrinker and Stretcher Machines Product manual
Contents
1. gt E3 Bolt 10 SKU 96008 For technical questions please call 1 800 444 3353 Page 4 5 Secure Shaft 14 to Pedal 3 with Pin 9 and Lock Pin 17 6 Attach Springs 11 to Pedals 3 and Stand 1 as shown in Figure 2 Figure 3 95062 Manual Shrinker Stretcher Frame 1 VA Bolt included with SKU 95062 7 To connect each Shrinker Stretcher to the Stand two Bolts are inserted through the underside of the Frame 1 table and threaded into the bottom of each Shrinker Stretcher see Figure 3 All four Mounting Bolts are included with SKU 95062 8 The Clevis 15 will fit in place of the the Shrinker Stretcher Handle A Clevis 15 will fit in place of each Shrinker Stretcher Handle Remove the Handle and insert the Clevis 15 in its place Insert Pin 18 and Lock Pin 19 to secure Clevis 15 in its place see Figure 4 Figure 4 Secure Clevis 15 in place with Pin 18 and Lock Pin Clevis 15 19 not shown OPERATION INSTRUCTIONS 1 Follow all instructions in the Assembly and Operation Manual for SKU 95062 SKU 96008 For technical questions please call 1 800 444 3353 Page 5 2 To activate each Shrinker Stretcher press down on the Pedal with your foot INSPECTION MAINTENANCE AND CLEANING 1 BEFORE EACH USE inspect the general condition of the tool Check for loose screws misalignment or binding of moving parts cracked or broken parts and any other condition that may affect it2. CENTRAL MACHINERY SHRINKER AND STRETCHER STAND exe l 11 96008 ASSEMBLY AND OPERATION INSTRUCTIONS Shrinker Stretcher not included Due to continuing improvements actual product may differ slightly from the product described herein Distributed Exclusively by fi HARBOR FREIGHT 1 TOOLS mmx 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http Awww harborfreight com TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE Copyright 2007 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools SPECIFICATIONS Leg Width 26 1 8 Foot Pads Distance from 1 Ft Ground Net Weight 74 7 Lbs Foot pedal operation allows you to keep both hands free for handling the work piece Save This Manual You will need this manual for the safety warnings and precautions operating inspec tion maintenance and cleaning procedures parts list and assembly diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Write the product s serial number in the back of the manual near the assembly diagram or write month and year of purchase if product has no number Keep this manual and invoice in a safe and dry place for future reference GENERAL SAFETY RULES WARNING READ AND
3. TY Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the com plaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determin
4. UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious injury SAVE THESE INSTRUCTIONS 1 Keep your work area clean and well lit Cluttered benches and dark areas invite accidents 2 Keep bystanders children and visitors away while operating the Shrinker Stretcher Distractions can cause you to lose control Protect others in the work area from debris such as chips and sparks Provide barriers or shields as needed 3 Stay alert Watch what you are doing and use common sense when assembling this Stand and when using the Shrinker Stretcher Do not use while tired or under the influence of drugs alcohol or medication A moment of inattention while operating this product may result in serious personal injury SKU 96008 For technical questions please call 1 800 444 3353 Page 2 10 11 12 13 14 15 16 Dress properly Do not wear loose clothing or jewelry Contain long hair Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Do not overreach Keep proper footing and balance at all times Proper foot ing and balance enables better control of the Shrinker Stretcher in unexpected situations Use safety equipment Always wear eye protection Nonskid safety shoes hard hat must be used for appropriate conditions Always wear ANSI approved safety goggles when using o
5. e there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 SKU 96008 For technical questions please call 1 800 444 3353 Page 8
6. ker Stretcher Stand as a scaffold ladder or stool Only use this product for its intended use Make certain to use the Shrinker Stretcher Stand on a flat level and solid surface that will support the weight of the Stand and the weight of the work piece When assembling or moving a heavy or large work piece always get assis tance from other able individuals SKU 96008 For technical questions please call 1 800 444 3353 Page 3 17 Make certain that the work area is large enough so that the Shrinker Stretcher Stand and the workpiece are clear of any walls furniture and obstacles 18 Only use this Stand with SKU 95062 Manual Shrinker Stretcher ASSEMBLY INSTRUCTIONS Note For additional information regarding the parts listed in the following pages refer to the Assembly Diagram near the end of this manual 1 Connect each Wheel 6 to Support 4 with Pin 7 and Cotter Pin 8 2 Attach Support 4 and Support Leg 13 to the Stand 1 with Bolts 5 and Lock Nuts 12 Insert each Bolt 5 through the Support 4 the Stand 1 and through the Support Leg 13 then thread on Lock Nuts 12 3 Secure each Clevis 15 to each Shaft 14 with Pin 9 Cotter Pin 16 and Lock Pin 17 see Figure 1 Figure 1 Lock Pin 17 ae Pin 9 hidden from view 4 Secure each Pedal 3 to Frame 1 with Bolt 10 and Lock Nut 2 see Figure 2 Figure 2 Stand 1 ___ ____ Spring 11 ___ W Lock Nut 2 Pedal 3
7. r performing maintenance on this tool Do not force the tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed Do not force the tool and do not use the tool for a purpose for which it is not intended Store idle tools out of reach of children and other untrained persons Tools are dangerous in the hands of untrained users Never allow children to play with or climb on this Stand Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the tool s operation If damaged have the tool serviced before using Many accidents are caused by poorly maintained tools Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool When servicing a tool use only identical replacement parts Follow instruc tions in the Inspection Maintenance And Cleaning section of this manual Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury Maintain labels and nameplates on the tool These carry important information lf unreadable or missing contact Harbor Freight Tools for a replacement Maintain a safe working environment Make sure there is adequate surrounding workspace Do not use this product in a damp or wet location Do not use the Shrin
8. s safe operation Do not use damaged equip ment 2 Clean the Shrinker and Stretcher Stand with warm water and a soft cloth Do not use flammable detergents or harsh abrasives as they will damage the Stand PARTS LIST Part Description Q ty Part Description Q ty 15 Clevis a2 6 whe 2 17 hock Pin r Cid e forn fe 9 Pn Ci PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEM BLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 96008 For technical questions please call 1 800 444 3353 Page 6 PARTS AND ASSEMBLY DIAGRAM SKU 96008 For technical questions please call 1 800 444 3353 Page 7 LIMITED 90 DAY WARRAN
Download Pdf Manuals
Related Search