Harbor Freight Tools Fluorescent Magnifying Lamp Product manual
Contents
1. Item 60643 For technical questions please call 1 800 444 3353 2 Keep Lamp clean and free of dirt debris or grease 3 Forlonger working life protect Lamp from sunlight and moisture 4 AFTER USE wipe external surfaces of the Lamp with clean cloth 4 Lift Bulb Cover away from Lens Frame Note Be careful when removing Bulb Cover the Lens is loosely attached to the Lens Frame and may pop out 5 Remove the three Bulb Clips by removing the Screws securing them See Figure C T Bulb Clip two not shown AER Figure C Page 5 6 Pull Bulb out of Bulb Socket Properly dispose of old Bulb and attach new Bulb to Bulb Socket See Figure D Bulb Socket Figure D Replace Bulb Clips and secure with the thee Screws Do not overtighten Put Bulb Cover back into place so that screw holes align with holes along Lens Frame Fasten Bulb Cover to Lens Frame using the five Screws Do not overtighten 10 Once all connections are secure return Lamp to its normal position Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUC2. 1 800 444 3353 Place Clamp in desired position then tighten Clamp Knob until Clamp is secure Insert Mounting Post into Clamp Slot Item 60643 Plug Power Cord into nearest two or three prong outlet 2 Turn on Lamp by pushing Power Switch to I On position 3 Use Swing Arm and Adjusting Knob to reach desired angle Maintenance Instructions 4 To use Lamp s lens lift up Lens Cover 5 After each use shut Lens Cover turn off Lamp by pushing Power Switch to O Off position and remove Power Cord from outlet A AWARNING Procedures not specifically explained in this manual must be performed only by a qualified technician TO PREVENT SERIOUS INJURY Unplug the Lamp turn the Power Switch off and allow Bulb to cool completely before performing any inspection maintenance or cleaning procedures BEFORE EACH USE inspect the general condition of the Lamp Check for loose hardware cracked or broken parts damaged electrical wiring or cable insulation and any other condition that may affect its safe operation Replacing Bulb Turn off Lamp and unplug Power Cord from outlet Allow lamp to cool completely The Bulb may still be hot even after lamp housing is cool N Lay Lamp down and set Adjusting Knob so that Lamp rests on work area with Bulb facing up 3 Use a screwdriver not included to remove the five Screws securing the Bulb Cover See Figure B Screws
3. seq 11 12 13 14 15 16 17 18 For technical questions please call 1 800 444 3353 The warnings precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Do not use near flammable materials Wear ANSI approved impact safety goggles when setting up this product Maintain products with care Keep the lamp clean for better and safer performance Inspect the components periodically If damaged have it repaired by a qualified technician Do not use outdoors IMPORTANT SAFETY INSTRUCTIONS This portable luminaire has a polarized plug one blade is wider than the other as a feature to reduce the risk of electric shock This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Never use with an extensioncord unless plug can be fully inserted Do not alter the plug Unplug from outlet when not in use and before maintenance or cleaning Risk of Electric Shock Use In Dry Locations Only Item 60643 Power Cord Safety 1 Ashort power supply cord is provided 3 If an extension cord is used to reduce risks resulting from becoming o a The marke
4. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference Tam swing arm Magnifying Lamp a Harbor Freight Tools Brand Visit our website at http www harborfreight com Email our technical support at tech harborfreight com ITEM 60643 When unpacking make sure that the product is intact and undamaged If any parts are missing or broken AWARNING please call 1 800 444 3353 as soon as possible Copyright 2012 by Harbor Freight Tools All rights reserved i No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cle
5. T IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Parts List e 1 6 jBubClp 3 8 Screw 19 9 Cover Cd 1 Inner Cover ing 2 ing 1 Page 6 For technical questions please call 1 800 444 3353 e Clamp Handle Clamp Screw Description Qty Item 60643 Assembly Diagram Record Product s Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Item 60643 For technical questions please call 1 800 444 3353 Page 7 Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside ou
6. aning procedures Write the product s serial number in the back of the manual or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference HFT swing arm Magnifying Lamp a Harbor Freight Tools Brand Visit our website at http www harborfreight com Email our technical support at tech harborfreight com ITEM 60643 When unpacking make sure that the product is intact and undamaged If any parts are missing or broken AWARNING please call 1 800 444 3353 as soon as possible Copyright 2012 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included A DANGER AWARNING ACAUTION NOTICE WARNING SYMBOLS AND DEFINITIONS CAUTION This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death Indicates a hazardous situation which if not avoided will result in dea
7. d electrical rating of the entangled in or tripping over a longer cord extension cord should be at least as great 2 Extension cords are available and may be as the electrical rating of the lamp used if care is exercised in their use b The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over A save THESE INSTRUCTIONS Specifications Electrical Rating 120 V 60 Hz 22W Magnification 1 75X Bulb Type 22W Circline Fluorescent Lamp Cord Length 72 Height 46 Clamp Capacity 2 3 8 TV LISTED Intertek 4006934 Item 60643 For technical questions please call 1 800 444 3353 Page 3 Setup Before Use A Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before setup or use of this product Adjusting i O b 4 Lens gt 4 P Cover Upper 2 Lens Arm uM Switch Frame N Bulb Cover not shown Lower d Arm Mounting JA Post A 9 Inserted into Clamp Slot magli Power octane Knob Cord Figure A Installing Lamp Note If needed place a scrap of non slip protective 2 material not included under Clamp to protect the table 1 Turn Clamp Knob counterclockwise until there is 3 enough clearance to slide the Clamp onto the table Page 4 For technical questions please call
8. r facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state a Harbor Freight Tools Brand 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353
9. th or serious injury Indicates a hazardous situation which if not avoided could result in death or serious injury Indicates a hazardous situation which if not avoided could result in minor or moderate injury Addresses practices not related to personal injury IMPORTANT SAFETY INFORMATION 1 10 Page 2 CAUTION TO REDUCE THE RISK OF FIRE USE ONLY CIRCLINE TYPE 22 WATT LAMP Install Clamp on horizontal surface only Otherwise lamp arm may fall out of slot and cause a fire while turned on Do not place under direct sunlight Magnifying glasses can cause fires if light is directed through them at flammable surfaces Close cover after every use Inspect before use Do not use if parts are loose or damaged The use of any accessory attachments not recommended by the lamp manufacturer may cause injuries Do not use lamp for other than intended use Maintain labels and nameplates on the appliance These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement Do not stare at the sun or other light source through the lamp s magnifying lens This lamp is not a toy Keep it out of reach of children WARNING Handling the cord on this product will expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling California Health amp Safety Code S 25249 5 et
Download Pdf Manuals
Related Search