Harbor Freight Tools Deluxe 12 Volt Trailer Light Kit Product manual
Contents
1. Splice Connector Green Wire Yellow Wire mmmn Brown Wire White Wire l Marker Light O E nutty C yS m TA yummi Marker Light Left Tail Light amp License Bracket ia Window underneath to light up license plate oS For technical questions please call 1 888 866 5797 Page 5 Item 62490 Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product AWARNING TO PREVENT SERIOUS INJURY OR DEATH FROM DRIVING HAZARDS Test operation of all lights before every use Troubleshoot and repair wiring properly before using Do not use while trailer light operation does not match vehicle light operation if any lights do not light up or if any lights flicker Park on level area away from traffic and set vehicle parking brake chock tires Testing 1 Connect the Y Harness Plug to 3 The brighter Stop Lights should turn the Trunk Harness Plug on only when the vehicle s brake 2 Turnon the towing vehicle s headlights pedal is depressed or when the The two Stop Turn Tail Lights and vehicle s turn signal is activated two Marker Lights should turn on ignition key must be in its on position Troubleshooting No lights light up 1 Vehicle s running lights off 2 Trailer wiring harness disconnected or connection i2. ETO Parts List and Diagram Part Description b LH Tail Light Description License Plate Bracket Y Harness Trunk Harness 0 with license plate light on bottom Marker Light Mounting Hardware Record Serial Number Here Note Some parts are listed and shown for illustration purposes only and are not Note If product has no serial number available individually as replacement parts record month and year of purchase instead Item 62490 For technical questions please call 1 888 866 5797 Page 7 Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation o
3. Light marked LH with the License Window on the left rear of the trailer with its side marker to the outside of the trailer Then mount the License Plate Bracket underneath it oS Mount the Tail Light marked RH without the foz License Window on the right rear of the trailer with its side marker to the outside of the trailer Use the included Metal Frame Clips to mount each half of the Y Harness down each side of the trailer Run one YELLOW wire and one BROWN wire down the left side and one GREEN wire and one BROWN wire down the right side of the trailer For technical questions please call 1 888 866 5797 Connect the YELLOW and BROWN wires to the Left Tail Light with the Wire Nut Connectors Connect the GREEN and BROWN wires to the Right Tail Light with the Wire Nut Connectors Attach the WHITE GROUND wire to the trailer tongue or frame Note This kit depends on a metal grounded trailer frame Mount the two Marker Lights in the areas shown in the illustration Connect each wire from the Marker Lights to the BROWN wire on each half of the Y Harness Item 62490 Wiring Diagram Connect Green wire to Vehicle R H Stop amp Turn p cecoccosocoooooo r Connect Yellow Running Lights wire to Vehicle L H Stop amp Turn White wire to Vehicle Frame Connect Connect Brown Trailer wire to Vehicle Ground Point C
4. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference DELUKE ITEM 62490 Visit our website at http www harborfreight com REV 14k Email our technical support at productsupport harborfreight com When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2014 by Harbor Freight Tools All rights reserved r No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Specifications 12 VDC only Negative Ground Only 2 combination stop tail turn signals 2 amber side marker lights Features license plate light and Y Harness Tail Li
5. act a qualified technician for guidance Example additional marker light locations Mount the three Red Marker Lights to the rear of the vehicle making sure the Lights are no closer than 6 and no farther away than 12 from each other center to center After mounting use wire nut connectors not included to connect all three leads together Then connect to the Brown wire in the back of one Tail Light either side provided in this Kit 4 Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement For technical questions please call 1 888 866 5797 Page 3 Installation Instructions A Towing Vehicle Installation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product Note Use the BLUE Splice Connectors to make the connections in steps 1 3 1 Connect the BROWN wire of the Trunk Harness to the towing vehicle s Tail Light wire Connect the YELLOW wire of the Trunk Harness to the vehicle s Left Stop amp Turn light Trailer Installation Connect the GREEN wire of the Trunk Harness to the vehicle s Right Stop amp Turn light Attach the WHITE GROUND wire to the towing vehicle s frame NOTE INSTALL THE LIGHT KIT ONLY AFTER THE TRAILER IS FULLY ASSEMBLED 1 Page 4 Mount the Tail
6. f exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state Haul yiaster 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 1 888 866 5797
7. ghts 12V 21 5W Light Type Marker Lights 12V 5W HaulfMaster Page 2 For technical questions please call 1 888 866 5797 Item 62490 Important Safety Information Installation Precautions 1 Install only according to these instructions Improper installation can create hazards Wear ANSI approved safety goggles and heavy duty work gloves during Installation Keep installation area clean and well lit Keep bystanders out of the area during Installation Do not install when tired or when under the influence of drugs or medication Read all instructions and safety precautions in the vehicle s manual onto which the Light Kit will be installed Install on negative ground 12 VDC systems only Use Precautions 1 This product is not a toy Do not allow children to play with this item 2 Use as intended only Not for marine use Do not submerge 3 Inspect before every use do not use if parts are loose or damaged Item 62490 8 Do not install this product yourself unless you are technically competent to do so If necessary have a qualified technician install the Light Kit 9 Use the correct lights and electrical set up for your trailer If the vehicle is OVER 80 wide install three additional Red Marker Lights not included onto the rear of the unit 10 If the towing vehicle has rear turn signals separated from its stop lights additional hardware and installation procedures will be needed Cont
8. s loose 3 Main ground wire not connected properly match vehicle light operation Y Harness not wired properly to trailer lights light up or flickers 2 That light is broken All lights flicker Trailer wiring harness connection is loose 2 Main ground wire not connected properly Vehicle s fuse blows eee Short circuit somewhere in wiring or lights Diagnose to isolate A ania repair the problem Route wires carefully to avoid pinching Park on level area away from traffic and set vehicle parking brake chock tires Q Follow all safety precautions whenever diagnosing or servicing the lights Page 6 For technical questions please call 1 888 866 5797 Item 62490 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND INSTALLATION DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THER
Download Pdf Manuals
Related Search