Harbor Freight Tools Clamp Light With Aluminum Reflector Product manual
Contents
1. Diameter x 7 High Maximum 100 Watt 120 Volt Type A Bulb Required Bulb Not Included UL usten E2 01084 IMPORTANT SAFETY INSTRUCTIONS This portable lamp has a polarized plug one blade is wider than the other as a feature to reduce the risk of electric shock This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Never use with an extension cord unless plug can be fully inserted Do not alter the plug CAUTION To reduce the risk of fire use 100 watt or smaller 120 Volt Type Alamp See Figure A Set Up Precautions 1 Set up only according to these instructions Improper set up can create hazards 2 Wear ANSI approved safety goggles during set up Use Precautions 1 This product is not a toy Do not allow children to play with or near this item N Use for intended purpose s only w Inspect before use do not use if parts are loose or damaged 4 Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement 5 Make sure to turn off the Clamp Light and unplug the unit from its electrical outlet when unattended 6 Avoid accidental burns Do not touch the bulb not included or the Reflector while the Clamp Light is turned on Turn off the Clamp Light and wait until the b2. desired object making sure the object being clamped onto is capable of supporting the weight of the Clamp Light See Figure B 8 When storing make sure to keep the Clamp Light in a clean dry safe location out of reach 4 Adjust the Clamp Light so that its beam will of children and other unauthorized persons center on the object intended to be illuminated 5 Plug the Power Cord into the nearest 120 volt grounded electrical outlet See Figure B luminar WORK Record Serial Number Here Note If product has no serial number record Note Replacement parts are not available month and year of purchase instead Item 67651 For technical questions please call 1 888 866 5797 Page 3 Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the excl
3. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference ITEM 67651 100 WATT 120 VOLT CLAMP LIGHT WITH ALUMINUM REFLECTOR Visit our website at http www harborfreight com REV 14g Email our technical support at productsupport harborfreight com When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2010 by Harbor Freight Tools All rights reserved r 3 No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Specifications Electrical 120 VAC 60 Hz Requirements Power Cord 18AWG SPT 2 6 Length Reflector Size 8 1 2
4. ulb and Housing are completely cool before touching Page 2 For technical questions please call 1 888 866 5797 Figure A Note Dry location use only 3 Do not set up this product when tired or when under the influence of drugs alcohol or medication 7 Avoid eye injury Do not look directly into the bulb when operating this product 8 Do not operate the Clamp Light with a damaged or missing Reflector 9 WARNING The cord of this product contains lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling California Health amp Safety Code 25249 5 et seq Turn off the Clamp Light unplug its Power Cord from its electrical outlet and allow it to completely cool down prior to storing or performing any inspection maintenance or cleaning Item 67651 Operating Instructions Light Bulb Socket Not Shown Power Cord Spring Reflector Clamp Ry Figure B 1 Screw the Reflector onto the 6 Turn the Clamp Light on by pressing Light Bulb Socket its Power Switch See Figure B 2 Firmly screw in a 100 Watt 120 Volt Type A 7 When finished using the Clamp Light bulb not included See Figure B press the Power Switch to turn off the Light unplug its Power Cord from its electrical outlet and allow it to completely cool down prior to removal storage 3 Use the Spring Clamp to clamp the Light firmly onto the
5. usion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state luminar WORK 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 1 888 866 5797
Download Pdf Manuals
Related Search