Harbor Freight Tools 96144 User's Manual
Contents
1. accessories or storing the Heater Fan Always unplug the Heater Fan from its electrical outlet before performing any inspection maintenance or cleaning procedures Store idle equipment When not in use make sure Heater Fan is cool to the touch and then store in a dry location to inhibit rust Always lock up the Heater and keep out of reach of children Store an idle Heater Fan out of reach of children and other untrained persons This product is dangerous in the hands of untrained users Check for breakage of parts and any other condition that may affect the Heater Fan operation If damaged have it serviced before using Many ac cidents are caused by poorly maintained products Tool service must be performed only by qualified repair personnel Service or maintenance performed by unqualified personnel could result in a risk of injury Only a qualified service technician should repair this product Follow instruc tions in the Inspection Maintenance And Cleaning section of this manual Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury The fuse in this unit must only be replaced with another 15 Amp Fast Acting Fuse of the same type Maintain labels and nameplates on the tool These carry important information lf unreadable or missing contact Harbor Freight Tools for a replacement Never leave the Heater Fan unattended when it is plugged in Turn off the Heater F2. 12V HEATER FAN exe 31 96144 Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Bivd Camarillo CA 93011 Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2007 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 REVISED 2008d SPECIFICATIONS Mounting Holes 2 5 32 Diameter 1 Cigarette Lighter Plug Adapter with green power LED indicator Save This Manual You will need this manual for the safety warnings and precautions assembly oper ating inspection maintenance and cleaning procedures parts list and assembly diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Write the product s serial number in the back of the manual near the assembly dia gram or write month and year of purchase if product has no number Keep this manual and invoice in a safe and dry place for future reference GENERAL SAFETY RULES WARNING READ AND UNDERST
3. AND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious injury SAVE THESE INSTRUCTIONS 1 Keep your work area clean and well lit Cluttered benches and dark areas invite accidents 2 Do not use this product in rain or wet conditions Water entering this product will increase the risk of electric shock 3 Stay alert Watch what you are doing and use common sense when using this product Do not use this product while tired or under the influence of drugs alcohol or medication A moment of inattention while operating this product may result in serious personal injury 4 Keep out of the reach of any children A responsible adult should be present if children are in the area while the Heater Fan is being used 9 Do not force the Heater Fan Use the correct product for your application The correct Heater Fan will do the job better and safer at the rate for which it is SKU 96144 For technical questions please call 1 800 444 3353 Page 2 10 11 12 13 14 15 16 17 18 designed Do not force the Heater Fan and do not use it for a purpose for which it is not intended Do not use the Heater Fan if the On Off Switch does not turn it on or off Any product that cannot be controlled with the On Off Switch is dangerous and must be replaced or repaired Disconnect the Power Cord Plug from the power source before making any adjustments changing
4. an and unplug it from its electrical outlet before leaving Do not allow the Heater Fan to be exposed to fire or high heat as this may result in an explosion Only plug into a DC12V Cigarette Lighter Adapter receptacle Do not block air vents The Heater Fan gets hot when operating and blocking the vents will cause overheating resulting in explosion or injury Risk of Burns Keep children and pets away from this unit while it is hot Do not place hands or feet near the vent Do not deplete the vehicle battery Only use this Heater when the vehicle s en gine is running SKU 96144 For technical questions please call 1 800 444 3353 Page 3 19 20 21 22 Not For Extended Use Only use this Heater for 15 to 20 minutes at a time Place the Heater in the proper location Set up the Heater in a level location that allows at least 2 inches of air space around the sides of the unit Make sure nothing comes in contact with the Heater Do not operate in close proximity to liquid Check vehicle manual to ensure the vehicle lighter socket is 15 amps or greater Do not use a socket extension or pigtail to operate this heater Do not overload the lighter socket by operating multiple appliances at the same time UNPACKING When unpacking check to make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possibl
5. e ASSEMBLY INSTRUCTIONS Z WARNING Make sure the On Off Switch of the Heater Fan is in its OFF posi tion and that it is unplugged from its electrical outlet before making any adjustments to it Your 12V Rubberized Heater Fan comes completely assembled Instructions on replacing the Fuse and installing the Heater Fan optional are outlined below Replacing the Fuse Fuse Holder 18 Figure 1 If the Heater Fan fails to operate when plugged into the cigarette lighter adapter receptacle check to see if the Fuse 12 should be changed If the fuse for heater is useable check the fuse on your vehicle for the lighter socket and change if nec essary Replace fuses with only same type and rating SKU 96144 For technical questions please call 1 800 444 3353 Page 4 2 Using a small flat head screwdriver or similar tool pull out the Fuse 12 from the Fuse Holder 18 see Figure 1 3 Do not replace with a different size fuse as this may result in excessive heat build up and explosion which can damage the CarHeater Fan and cause injury Mounting 1 The Heater Fan can be permanently mounted to the vehicle using Mounting Screws 21 or can be mounted using the Adhesive Tape as desired Mount the Heater Fan so that it is out of direct sunlight Do not mount the Heater Fan on upholstered seats or flammable surfaces 2 When using Mounting Screws make certain that all drilling paths are clear of elec trical lines cables
6. moved around when greater mobility as needed The LED On Off Switch 16 turns the power ON To select either the Fan 10 or the Heater press the Fan On Off Switch 11 to the setting as marked Toggle the Fan On Off Switch to the center position to turn off these functions Remove unit from base and fold out handle to defrost windows The Heater Fan Base swivels 180 to position air flow Do not leave the Heater Fan running if your leave the area SKU 96144 For technical questions please call 1 800 444 3353 Page 6 INSPECTION MAINTENANCE AND CLEANING 1 AWARNING Make sure that both the Fan On Off Switch 11 and the LED On Off Switch are in their OFF position and that the Heater Fan is unplugged from its power source before performing any inspection maintenance or cleaning procedures 2 BEFORE EACH USE inspect the general condition of the Heater Fan Check for loose screws misalignment or binding of moving parts cracked or broken parts damaged electrical wiring and any other condition that may affect its safe operation Do not use damaged equipment 3 Store the Car Fan in a dry location out of direct sunlight Keep the Car Fan out of the reach of children 4 Clean with a soft cloth Do not use flammable liquids or harsh detergents to clean the Car Fan Do not submerge in fluid to clean PARTS LIST _ Description Description 12 Fuse 15A f 13 RedLED 14 WhiteLED 5 5 6 Mounting Ba
7. se 8 LEDLens 9 AirVentWindow_ ik PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEM BLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 96144 For technical questions please call 1 800 444 3353 Page 7 ASSEMBLY AND PARTS DIAGRAM SKU 96144 For technical questions please call 1 800 444 3353 Page 8
8. wire and any other obstructions 3 Make certain that there is sufficient length in the Power Cord to reach the Cigarette lighter 4 Use the Mounting Base 6 as a guide to mark two holes in the desired surface Drill holes in the desired surface D Align the holes in the Mounting Base 6 with the drilled holes Mount the Mounting Base 6 using Mounting Screws 21 6 When using the Adhesive Tape 21 mount as follows Make certain that there is sufficient length in the Power Cord to reach the Cigarette lighter Wipe the Base 6 with alcohol for a grease free surface Peel off one face of the Adhesive Tape 21 Place the tape on the face of the Base 6 and press down and hold for one minute to adhere T Prepare the mounting surface on the car following the same procedure as indicated in the above mentioned paragraph Peel the tape backing carefully and position the Base 6 on the surface and press into place Leave in place for an hour before use SKU 96144 For technical questions please call 1 800 444 3353 Page 5 9 OPERATION INSTRUCTIONS Figure 2 i LED On Off SWitch 16 Figure 3 Fan On Off Switch 11 Handle 4 5 To operate the Heater Fan place the ON OFF 11 switch in the Center OFF position Plug the Cigarette Plug 1 into the lighter plug receptacle of your vehicle Note The Heater Fan can be removed from the Mounting Base 6 By holding the extended handle 4 5 the Heater Fan can be
Download Pdf Manuals
Related Search