Harbor Freight Tools 95781 User's Manual
Contents
1. before using Many accidents are caused by poorly maintained products Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one product may become hazardous when used on another product SERVICE Product service must be performed only by qualified repair personnel Service or maintenance performed by unqualified personnel could result in a risk of injury When servicing a product use only identical replacement parts Follow instructions in the Inspection Maintenance And Cleaning section of this manual Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury SPECIFIC SAFETY RULES Maintain labels and nameplates on this product These carry important informa tion If unreadable or missing contact Harbor Freight Tools for a replacement Maintain a safe environment Make sure there is adequate surrounding space Do not use this product in a damp or wet location The AC DC Adapter must only be plugged into a 120 volt grounded electrical outlet INDOORS Keep the Adapter dry at all times Keep product out of reach of children and in a location that will not cause a tripping hazard SKU 95781 For technical questions please call 1 800 444 3353 Page 4 5 People with pacemakers should consult their physician s before use Elec tromagnetic fields in close proximity to a heart pacemaker could cause pacemak2. or from the Mushroom Head 2 See Figures H and l 2 Check the position of the Switch on the Timer Unit 10 Slide the Switch to 30 Min to turn the Water Pump 11 ON for 30 minutes and OFF for 30 minutes repeatedly Or slide the Switch to 60 Min to turn the Water Pump ON for 60 min utes and OFF for 60 minutes repeatedly See Figure l 3 NOTE Slide the Switch on the Timer Unit 10 to the OFF position to turn off the Water Pump 11 It is recommended to unplug the AC DC Adapter 9 if the Pet Water Fountain will not be used for long periods of time See Figure I 4 Water flow speed can be adjusted by sliding the small window located on the Water Pump s 11 side next to where the water flows out 5 6 SKU 95781 For technical questions please call 1 800 444 3353 Page 10 14 Spray Nozzle 14 1 Fountain Nozzle 14 2 Spray Cover Figure J T IMPORTANT Dogs and larger pets will probably prefer that you remove the Mushroom Head 2 and Mushroom Stand 17 and replace them with the includ ed Spray Nozzle 14 or Fountain Nozzle 14 1 See Figures H and J 6 To install the Spray Nozzle 14 or Fountain Nozzle 14 1 a Remove the Mushroom Head 2 and Mushroom Stand 17 See Figure H b Separate the Clear Tube 12 by unplugging the 90 degree fitting that plugs into the bottom of the Mushroom Stand 17 See Figures A B and H c Separate the two Clear Tubes 12 at the black union Then remove t
3. AUTOMATIC PET WATER FOUNTAIN ele 11 95781 ASSEMBLY AND OPERATION INSTRUCTIONS 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http Awww harborfreight com TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE Copyright 2007 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 SPECIFICATIONS AC DC Adapter Input 120 VAC 60 Hz AC DC Adapter Output 12VAC 200 mA AC DC Adapter Power Cord Length 18 AC DC Adapter Power Plug Type 2 Prong Non Polarized Pump Power Input 12 VAC 60 Hz Pump Power Cord Length 100 Electrical Requirements Timer Markings 30 Min OFF 60 Min BIE Owen 1 Green L E D Indicator Water Tank Capacity 84 5 Ounces Overall Dimensions 16 1 4 Long x 9 3 4 Wide x 9 High Weight 3 4 Pounds Save This Manual You will need this manual for the safety warnings and precautions assembly oper ating inspection maintenance and cleaning procedures parts list and assembly diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Write the product s serial number in the back of the manual near the assembly dia gram or write month and year of pu
4. ack Lever Water Tank Gasket Spray Nozzle Water Tank Cap Mushroom Stand Record Product s Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts REV 07 SKU 95781 For technical questions please call 1 800 444 3353 Page 13 SKU 95781 For technical questions please call 1 800 444 3353 Page 14
5. al questions please call 1 800 444 3353 Page 8 WATER TANK STAND 16 FIGURE D eS i vs ae 6 Carefully slide the Water Tank Stand 16 into the Base 1 while pulling the Power Cord of the Pump 11 out the back of the Water Tank Stand Make sure all of the Power Cord comes out the back See Figure E WATER TANK CAP 6 FIGURE F FIGURE G 7 Fill the Water Tank 4 with clean cool water Make sure the Water Tank Gasket 5 is properly seated in the Water Tank Cap 6 Then screw the Water Tank Cap onto the Water Tank See Figure F 8 Turn the Water Tank 4 upside down With the black Water Outlet 8 on the Water Tank pointing to the hole in the Water Tank Stand 16 insert the Water Tank into the Water Tank Stand See Figure G SKU 95781 For technical questions please call 1 800 444 3353 Page 9 p AC DC ADAPTER 9 _ MUSHROOM HEAD 2 i 9 Insert the Mushroom Head 2 onto the Mushroom Stand 17 See Figure H 10 Connect the AC DC Adapter 9 to the Timer Unit 10 Then connect the Timer Unit to the Power Cord of the Water Pump 11 NOTE Should you not want to use the Timer Unit you can remove it and connect the AC DC Adapter directly to the Power Cord of the Water Pump See Figure l OPERATING INSTRUCTIONS 1 Plug the AC DC Adapter 9 into the nearest 120 volt grounded electrical outlet The Water Pump 11 should start and water will come out from the nozzle
6. and outlet should look like those in the following illustration See 3 Prong Plug and Outlet 3 Prong Plug and Outlet Outlets for 2 Prong Plug SKU 95781 For technical questions please call 1 800 444 3353 Page 5 DOUBLE INSULATED PRODUCTS PRODUCTS WITH TWO PRONG PLUGS 1 Products marked Double Insulated do not require grounding They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories Inc the Canadian Standard Association and the National Electrical Code See Outlets for 2 Prong Plug 2 Double insulated products may be used in either of the 120 volt outlets shown in the preceding illustration See Outlets for 2 Prong Plug EXTENSION CORDS 1 Grounded products require a three wire extension cord Double Insulated tools can use either a two or three wire extension cord 2 As the distance from the supply outlet increases you must use a heavier gauge extension cord Using extension cords with inadequately sized wire causes a seri ous drop in voltage resulting in loss of power and possible product damage See Table A 3 The smaller the gauge number of the wire the greater the capacity of the cord For example a 14 gauge cord can carry a higher current than a 16 gauge cord See Table A 4 When using more than one extension cord to make up the total length make sure each cord contains at least the minimum wire siz
7. e required See Table A 5 lf you are using one extension cord for more than one product add the nameplate amperes and use the sum to determine the required minimum cord size See Table A 6 If you are using an extension cord outdoors make sure it is marked with the suffix W A W in Canada to indicate it is acceptable for outdoor use T Make sure your extension cord is properly wired and in good electrical condition Always replace a damaged extension cord or have it repaired by a qualified electri cian before using it 8 Protect your extension cords from sharp objects excessive heat and damp or wet areas SKU 95781 For technical questions please call 1 800 444 3353 Page 6 RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS 120 OR 240 VOLT NAMEPLATE EXTENSION CORD LENGTH AMPERES at full load 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet_ o mo n w 2 0 gt ST f o ona Y n J wo oo e o 161 200 TABLE A Based on limiting the line voltage drop to five volts at 150 of the rated amperes SYMBOLOGY Double Insulated amp SP Canadian Standards Association Underwriters Laboratories Inc Volts Alternating Current Rte No Load Revolutions per Minute RPM UNPACKING When unpacking check to make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at the number shown on the cover of this manual as s
8. er interference or pacemaker failure GROUNDING A WARNING Improperly connecting the grounding wire can result in the risk of electric shock Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded Do not modify the power cord plug provided with this prod uct Never remove the grounding prong from the plug Do not use this product if the power cord or plug is damaged If damaged have it repaired by a service facility before use If the plug will not fit the outlet have a proper outlet installed by a qualified electrician GROUNDED PRODUCTS PRODUCTS WITH THREE PRONG PLUGS 1 Products marked with Grounding Required have a three wire cord and three prong grounding plug The plug must be connected to a properly grounded outlet If the tool should electrically malfunction or break down grounding provides a low resistance path to carry electricity away from the user reducing the risk of electric shock See 3 Prong Plug and Outlet 2 The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool The green wire in the cord must be the only wire connected to the tool s grounding system and must never be attached to an electrically live terminal See 3 Prong Plug and Outlet 3 Your product must be plugged into an appropriate outlet properly installed and grounded in accordance with all codes and ordinances The plug
9. fety eye goggles when assem bling this product PRODUCT USE AND CARE Do not force this product Use the correct product for your application The correct product will do the job better and safer at the rate for which it is designed Do not force this product and do not use this product for a purpose for which it is not intended SKU 95781 For technical questions please call 1 800 444 3353 Page 3 Do not use if Power Switch of the Timer does not turn it on or off Any product that cannot be controlled with Power Switch is dangerous and must be replaced Disconnect the Power Cord Plug from the power source before making any adjustments changing accessories or storing the tool Such preventive safety measures reduce the risk of starting the tool accidentally Always unplug this prouduct from its electrical outlet before performing any inspection mainte nance or cleaning procedures Store idle electrically powered products out of reach of children and other un trained persons Such products are dangerous in the hands of untrained users Maintain this product with care Keep this product clean Properly maintained products are less likely to malfunction and are easier to control Do not use dam aged products Tag damaged products Do not use until repaired Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect this product s operation If damaged have the product serviced
10. he black union and the short length of the Clear Tube 12 See Figures A and B d To use the Spray Nozzle 14 slip the male end of it 14 into the longest length of Clear Tube 12 that connects to the Water Pump 11 To use it with the Fountain function 14 1 remove the spray cover 14 2 See Figures A B and J e Turn on the Water Pump 11 and adjust the water flow by raising or lowering the Black Lever 13 which the Clear Tube passes through See Assembly diagram INSPECTION MAINTENANCE AND CLEANING 1 WARNING Make sure the Power Switch of the AC DC Adapter 9 is in its OFF position and that the Pet Water Fountain is unplugged from its electrical outlet before performing any inspection maintenance or cleaning procedures 2 BEFORE EACH USE inspect the general condition of the Pet Water Fountain Check for misalignment or binding of moving parts cracked or broken parts dam aged electrical wiring and any other condition that may affect its safe operation If abnormal noise or vibration occurs have the problem corrected before further use Do not use damaged equipment REV 07 SKU 95781 For technical questions please call 1 800 444 3353 Page 11 MAINTENANCE CHART Before Maintenance Type Inspect tool for damage S no Sag r Seer xt tt Ty Sx S S S x fof ST S S a ee ee ee Empty old water Refill with clean cool water Clean Water Filter TROUBLESHOOTING Problem Founta
11. in will not start 1 No power at outlet 1 Check power at outlet 2 Cord not connected 2 Check that cord is plugged in Improper water flow 1 Sharp bend s or kink s in Clear 1 Remove any bends or kinks in Tubes Clear Tubes 2 Improper adjustment of Black Lever 2 Slide Black Lever up or down until proper water flow is achieved Clogged water filter 1 Dirt or debris has clogged filter 1 Clean filter 2 Animal hair has clogged filter 2 Keep fountain clear of debris to prevent clogging PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEM BLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 95781 For technical questions please call 1 800 444 3353 Page 12 PARTS LIST AND DIAGRAM Q ty Part Description Q ty Clear Tube Water Tank Bl
12. o install a polarized outlet Do not change the plug in any way Double insulation El eliminates the need for the three wire grounded power cord and grounded power supply system Avoid body contact with grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is grounded Do not expose the AC DC Adapter of this product to rain or wet conditions Water entering the Adapter will increase the risk of electric shock Do not abuse the Power Cord Never use the Power Cord to carry this prod uct or pull the Plug from an outlet Keep the Power Cord away from heat oil sharp edges or moving parts Replace damaged Power Cords immediately Damaged Power Cords increase the risk of electric shock When operating a power tool outside use an outdoor extension cord marked W A or W These extension cords are rated for outdoor use and reduce the risk of electric shock PERSONAL SAFETY Stay alert Watch what you are doing and use common sense when operat ing this product Do not use this product while tired or under the influence of drugs alcohol or medication A moment of inattention while operating electrically powered products may result in serious personal injury Do not overreach Keep proper footing and balance at all times Proper footing and balance enables better control of the power tool in unexpected situations Use safety equipment Wear ANSI approved sa
13. oon as possible ASSEMBLY INSTRUCTIONS Note For additional information regarding the parts listed in the following pages refer to the Assembly Diagram near the end of this manual SKU 95781 For technical questions please call 1 800 444 3353 Page 7 1 WARNING Make sure the Power Switch of the Timer is in its OFF position and that the Pet Water Fountain is unplugged from its electrical outlet before making any adjustments to the unit 2 Insert the Pump 11 into the Base 1 Fit the Clear Tube 12 into the holding slot in the Base Then place the Pump s Power Cord in the wire holders along the side of the Base See Figure A PUMP 11 TE WOA oyk d n ina cig lt pai Bard F TEN aeo bina HL hela 2 Pan hAl ri eS anne 5 PUMP POWER CORD mappa enc ee ma TE FIGURE A 3 Make sure all Tubes are properly connected Remove any sharp bends or kinks in the Clear Tube 12 or water flow could be reduced See Figure B FILTER 3 ren a 4 FIGURE C 4 Align the Filter 3 into the corner slots of the Base 1 and press the Filter down into the water chamber Use the correct slot and do not use excessive force See Figure C 5 Feed the Power Cord of the Pump 11 through the square hole in the back of the Water Tank Stand 16 Make sure the Power Cord is secured by the wire holders on the side of the Base 1 See Figure D next page SKU 95781 For technic
14. rchase if product has no number Keep this manual and invoice in a safe and dry place for future reference GENERAL SAFETY RULES WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious injury SAVE THESE INSTRUCTIONS WORK AREA 1 Keep the watering area clean dry and well lit Cluttered wet and dark areas invite accidents 2 Do not operate this product in explosive atmospheres such as in the presence of flammable liquids gases or dust Electrically powered products can create sparks which may ignite the dust or fumes ELECTRICAL SAFETY 1 Grounded products must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances Never remove the SKU 95781 For technical questions please call 1 800 444 3353 Page 2 grounding prong or modify the plug in any way Do not use any adapter plugs Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded Ifthe product should electrically malfunction or break down grounding provides a low resistance path to carry electricity away from the user Double insulated products are equipped with a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician t
Download Pdf Manuals
Related Search