Harbor Freight Tools 94142 User's Manual
Contents
1. for which this Tricycle was designed Do not modify this Tricycle and do not use this Tricycle for a purpose for which it was not intended Only one person allowed on the Tricyle at any time Only one seated rider should be on the Tricycle at a time No other passengers should be standing on the rear of the frame or sitting on the handlebars The Tricycle is meant for off road use and is not for use as transportation on main streets and highways Do not exceed the maximum weight capacity of 250 Lbs Always make sure tires are properly inflated see page 2 WARNING The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking your Tricycle with Pneumatic Tires check to make sure all parts listed on page 5 are included If any parts are missing or broken please call HARBOR FREIGHT TOOLS at 1 800 444 3353 Assembly Your Rolling Tricycle with Pneumatic Tires will require complete assembly It is important that you read the entire manual to become familiar with the product BEFORE you assemble and use the Tricycle Before assembling the Tricycle be sure that you have all parts described in the Parts List and Assembly Diagram located on the last pages of this manual TH2. is correct see Technical Specification on page 2 A low tire inflation will force the rider to exert greater energy to move the Tricycle The tires may wear prematurely if the proper tire pressure is not maintained 2 Wheels and Hubs should be greased periodically Parts List Part Description Quantity Part Description Quantity 1 Handlebar 1 19a Crank right 1 2 Grip 2 20 Pedal 2 3 Lock Bolt 1 21 Screw 2 4 Sleeve 1 22 Nylon Cap 2 5 Lock Nut 1 23 Pin 2 6 Lock 1 24 Screw M6 4 7 Upper Cap 1 25 Front Axle 1 8 Stem 1 26 Front Wheel 1 9 Bolt M6 1 27 Lower Cap 1 10 Seat 1 28 Bearing Holder 1 11 Seat Bracket 1 29 Fork 1 12 Pin 1 30 Bearing 2 13 Frame 1 31 Nut M8 1 14 Cotter Pin 2 32 Washer 1 15 Rear Wheel 2 33 Bolt 1 16 Washer 4 34 Lock Nut 1 17 Nut M6 2 35 Rear Axle 1 18 Washer 2 36 Bearing Ring 1 19 Crank left 1 37 Bolt M8 1 Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Rev 05 06 SKU 94142 For technical questions please call 1 800 444 3353 Page 5 Parts and Assembly Diagram 33 3 3 A A PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY OF REPLACEMENT PARTS THERETO Rev 05 06 SKU 94142 For technical questions please call 1 800 444 3353 Page 6
3. E RIDER OF THE TRICYCLE MUST BE AT LEAST 48 TALL TO PROPERLY REACH THE PEDALS Handlebars To attach the Handlebar 1 loosen Nut 31 and slide out Bolt 83 and Washer 82 Insert Handlebar 1 see Figure 1 Adjust Handlebar so that it is centered on the Stem 8 and set at the angle that is most comfortable for the rider Now insert Bolt 33 with Washer 32 and thread on Nut 31 Tighten into place Apply pressure to the Handlebars 1 to make certain that they do not rotate Slide a Grip 2 onto the end of each Handlebar 1 Insert the Handlebar 1 and Stem 8 down through the Locknut 5 Upper Cap 7 and Bearing Ring 36 and into the Frame 13 Lock Bolt 3 Handlebar 1 Washer 32 Nut 31 SKU 94142 For technical questions please call 1 800 444 3353 Page 3 CAUTION Make certain that the Stem 8 and Handlebar 1 are set at an appropriate height for the rider Make certain that the Stem 8 is not raised beyond where it is secure in the Frame 13 Make certain it is stable and tightly in place before riding the Tricycle 4 To raise or lower the Stem 8 use a hex wrench to loosen the Lock Bolt 3 Gently pull up on the Stem 8 or push it down until it is at the desired height Make certain that it is centered with the frame and Front Wheel 26 Tighten the Lock Bolt 3 into place see Figure 1 Attaching the Seat and Seat Bracket 1 Line up the Seat Bracket 11 with one of the two sets of holes in th
4. JUMBO TRICYCLE WITH PNEUMATIC TIRES lea 941 ASSEMBLY amp OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web Site at www harborfreight com Copyright 2006 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product For future reference please complete the owner s record below Model Serial No Purchase Date SAVE THE RECEIPT WARRANTY AND THESE INSTRUCTIONS It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly Technical Specifications Construction Formed and welded square tubular steel frame high impact poly plastic pedals with reflector strips vinyl seat and foam rubber grips Frame Size 41 1 2 X 27 W Tire Tire Seat Dimensions 10 1 2 L X 10 1 4 W X 3 thick Maximum Weight Capacity 250 Lbs Seat Height from ground 23 with a maximum height of 26 Height from ground to handlebars 38 Ground to frame clearance 4 1 2 Maximum Tire PSI Front Tire 30 PSI maximum Two Rear Tires 40 PSI maximum IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT Safety Warnings and Precautions WARNING When usi
5. e frame see Figure 2 Insert Bolt 9 and thread on Lock Nut 34 2 If desired the Seat 10 can be rotated up and down or moved forward or backward by loosening the Nut located directly under the Seat 10 Figure 2 Seat and Seat Bracket Figure 3 Rear Wheel Nut under Seat 10 Seat D u Pi f Cotter Bracket 11 a mi Pin 14 Axle 35 Attaching Rear Wheels 1 Slide one Rear Wheel 15 onto the Rear Axle 35 Slide on Washer 16 and insert Cotter Pin 14 through the outside hole in the Axle 35 see Figure 3 Repeat for second Rear Wheel 15 see Figure 3 Replacing Front Wheel 1 To fix or replace the Front Wheel 26 first remove Screws 24 from Front Wheel 26 rim see Figure 4 and Assembly Diagram on page 6 Pull out Front Axle 25 and remove the Front Wheel 26 To put it back in position line up Front Wheel 26 with holes in the Fork 29 Insert Front Axle 25 and thread in Screws 24 Fork 29 Front Wheel 26 Screw 24 SKU 94142 For technical questions please call 1 800 444 3353 Page 4 Inserting the Pin I The Tricycle can be set up to carry a small cart or trailer neither is included behind it by attaching them to the rear of the Tricycle Unhook the Pin 12 from the rear of the Tricycle Attach the cart to the Tricycle and insert the Pin 12 back through the carrier and Tricycle see Figure 5 Maintenance 1 Check the tire pressure often Make certain that tire PSI
6. ng product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 Keep work area clean Cluttered areas invite injuries 2 Check for damaged parts Before using any product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for any broken or damaged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately 3 Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty 4 Always check hardware and assembled parts after assembling All connections should be tight and hardware tightened 5 Keep children away Children must never be allowed in the work area during Tricycle assembly Only older children taller than 48 and adults should ride this Tricycle 6 Dress properly Gloves are recommended when assembling the Tricycle Wear restrictive hair covering to contain long hair 7 Use eye protection Always wear ANSI approved impact safety goggles when assembling this product 8 Maintain product with care Store the Tricycle in a dry location SKU 94142 For technical questions please call 1 800 444 3353 Page 2 10 11 12 13 Use the right Tricycle for the situation There are certain applications
Download Pdf Manuals
Related Search