Harbor Freight Tools 93245 User's Manual
Contents
1. Gordon 30 MAGNETIC SWEEPER WITH WHEELS uea 93245 ASSEMBLY amp OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2005 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product For future reference please complete the owner s record below Model Serial No Purchase Date SAVE THE RECEIPT WARRANTY AND THESE INSTRUCTIONS It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly The 30 Magnetic Sweeper with Wheels will pick up nails pins bolts etc Rolls on hard surfaces and on carpets Technical Specifications Tires Rubber 7 x 1 1 2 Head Dimensions 30 Lx3 Wx4 H Handle Telescopes from 30 to 44 1 2 in length Capacity 50 Lb magnet pull Weight 19 Lbs2. 800 444 3353 Page 3 OPERATION 1 Adjust the handle to the desired height the handle telescopes from 30 L to 44 1 2 L The 1 handle can be adjusted by loosening the Plastic Knob 12 and pulling up on the Plastic Handle This will extend the Thick Tube 2 from the Thin Tube 3 When the desired height level is reached tighten the Plastic Knob 12 into place 2 While holding the handle roll the Magnetic Sweeper across the desired area such as a 2 workshop garage warehouse etc The Magnetic Sweeper will pick up metal objects such as nails pins bolts screws and metal shavings 3 To release the material that has been picked up by the Magnetic Sweeper place the Aluminum 3 Body 9 over a trash can or desired debris destination Pull up on the Adjustable Handle 11 as in Figure 1 Move the Sweeper away from the debris before releasing the Handle 11 or it will pick up the debris again Figure 1 Releasing Debris Pull up on Adjustable Handle 11 to release material from Sweeper Parts List Plastic Handle Thick Tube M6 x 12mm Bolt M6 x 35mm Pan Head Bolt ra swewe i rs faco dD re vanesse o mmeo 1 6mm Lock Washer 6mm Washer Adjustable Handle E3 1 Plastic Knob 2 14 M12mm Hex Nut SKU 93245 For technical questions please call 1 800 444 3353 Page 4 REV 08e Assembly Diagram Note Some parts are listed and shown for illustration purposes only and are not available i
3. IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT Safety Warnings and Precautions WARNING When using product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 Keep work area clean Cluttered areas invite injuries 2 Observe work area conditions Keep work area well lighted 3 Store idle equipment When not in use the Sweeper must be stored in a safe and clean location Always lock up products and keep out of reach of children 4 Use the right product for the job There are certain applications for which the Sweeper was designed Do not modify the Sweeper and do not use the Sweeper for a purpose for which it was not intended 5 Check for damaged parts Before using any product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for any broken or damaged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately 6 Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty 7 The Sweeper contains a 50 Lb magnetic pull capacity and should not be used around materials and components that can be damaged when exposed to a magnet 8 People with pacemakers should consult
4. their physician s before using this product Electromagnetic fields in close proximity to a heart pacemaker could cause interference or failure of the pacemaker REV 08e SKU 93245 For technical questions please call 1 800 444 3353 Page 2 9 Do not operate product if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not operate the product 10 Use eye protection Always wear ANSI approved impact safety goggles 11 Dress properly Do not wear loose clothing or jewelry as they can be caught in moving parts Non Skid footwear is recommended when assembling and when using the Sweeper 12 Do not force this product Do not use inappropriate attachments in an attempt to exceed the Sweepers capacity 13 Keep children away Children must never be allowed in the work area Do not allow children to play with or on the Sweeper 14 Keep the Sweeper clean Prior to each use clean nails staples or any debris off the Sweeper Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking your Magnetic Sweeper make certain that all parts on pag
5. e 5 of this manual are included If any parts are missing or broken please call HARBOR FREIGHT TOOLS at 1 800 444 3353 Assembly Your 30 Magnetic Sweeper with Wheels will require simple assembly It is important that you read the entire manual to become familiar with the product BEFORE you assemble and use the Magnetic Sweeper 1 As necessary attach the Connecting Plate 10 to the Aluminum Body 9 using two Bolts 17 2 Slide the Thin Tube 3 down into the slot in the Connecting Plate 10 Secure the Thin Tube 3 to the Connecting Plate with Pan Head Bolt 16 and Nut 23 3 Slide the Thin Tube 3 into the Thick Tube 2 and secure in place with Plastic Knob 12 If not already attached slide on Plastic Handle 1 Operation To release the material that has been picked up by the Magnetic Sweeper place the Aluminum Body 9 over a trash can or desired debris destination Pull up on the Adjustable Handle 11 as in Figure 1 Move the Sweeper away from the debris before releasing the Handle 11 or it will pick up the debris again Adjust the handle to the desired height the handle telescopes from 30 L to 44 1 2 L The 1 handle can be adjusted by loosening the Plastic Knob 12 and pulling up on the Plastic Handle This will extend the Thick Tube 2 from the Thin Tube 3 When the desired height level is reached tighten the Plastic Knob 12 into place 7 REV 08e SKU 93245 For technical questions please call 1
6. ndividually as replacement parts SKU 93245 For technical questions please call 1 800 444 3353 Page 5
Download Pdf Manuals
Related Search