Harbor Freight Tools 91729 User's Manual
Contents
1. will void the warranty Warning Locate the 3 Shelf Wooden Rack in a spot that is flat without an uneven surface Always distribute objects on Shelves evenly Uneven weight distribution could cause toppling Do not allow children to climb on the Shelves or play with the wooden rack Warning The warnings cautions and instructions discussed in this instruc tion manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking check to make sure the following parts are included If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual Assembly Instructions Assemble all parts on a smooth surface to avoid scratching Hardware is provided Set the Side Walls 1 on the floor Each Shelf 2 is to have the Back Stop 3 attached If not preassembled attach with Wood Screws 4 in the predrilled holes See Figure A Back Stops 3 Wood Screws 4 Shelf 2 Figure A Side Wall 1 Shelf 2 Figure B Attach each Side Wall 1 to the Three Shelves 2 with the Wood Screws 4 in the predrilled holes Do not tighten Screws 4 completely until all the Shelves 2 are assembled Check that all is level and then tighten all Screws 4 See Figure B A varnish or stain may2. 3 SHELF WOODEN RACK Wferel 191 729 ASSEMBLY INSTRUCTIONS Distributed Exclusively by ji HARBOR FREIGHT LS TOOLS matt 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2004 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specifications Overall Dimensions 35 25 High X 33 Long X 13 Wide X 5 Thick Maximum Weight Capacity Per Shelf 30 Lbs Materials Wood Unfinished Wood Color Weight 17 Lbs Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using this product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 2 Keep work area clean Cluttered areas invite injuries Keep children away Children must never be allowed in the work area Do not let children
3. be applied after assembly Avoid too much moisture on the shelving unless you use a waterproof bar finish Avoid tipping assembled Shelves SKU 91729 For technical questions please call 1 800 444 3353 Page 3 Parts List Part 2 Part 4 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE MENT PARTS THERETO NOTE Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 91729 For technical questions please call 1 800 444 3353 Page 4
4. play on this product Dress properly Do not wear loose clothing or jewelry as they can be caught in moving parts Protective electrically nonconductive clothes and nonskid footwear are recommended when working Use eye and ear protection Always wear ANSI approved impact safety goggles when assembling this product Goggles are available from Harbor Freight Tools Do not overreach Keep proper footing and balance at all times Two or more people are needed to assemble this product Use the right tool for the job Do not attempt to force a small product or attachment to do the work of a larger industrial product There are certain applications for which this product was designed Do not modify this product and do not use this product for a purpose for which it was not intended Stay alert Watch what you are doing use common sense Do not assemble this product when you are tired Check for damaged parts Before using this product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for loose parts and any other condition that may affect the operation of this product Replace loose or worn parts immediately Any part that is damaged should be properly repaired or replaced SKU 91729 For technical questions please call 1 800 444 3353 Page 2 10 11 Replacement parts When servicing use only identical replacement parts Use of any other parts
Download Pdf Manuals
Related Search