Harbor Freight Tools 3358 User's Manual
Contents
1. is rechargeable It can be charged by either using the Power Adapter 17 or the Car Adapter 16 To recharge your Battery 9 using the AC DC Adapter 17 Step 1 Insert the cord end of the Power Adapter 17 into the outlet on the back of the Spotlight Plug the Power Adapter 17 into an electrical outlet Step 2 The red light on the side of the Housing 1 will light indicating that the unit is properly plugged in For the initial charge of the Spotlight leave the Power Adapter 17 plugged in for between 12 and 14 hours until the Spotlight is fully charged The red light will shut off automatically when the battery is fully charged Subsequent charges of the Battery will take approximately 8 to 10 hours Important Always unplug the Power Adapter 17 from the Spotlight after the Spotlight is charged The Spotlight will not function properly if the Power Adapter is plugged into the Spotlight Note After each use of the Spotlight always fully recharge the battery Note This unit is equipped with an automatic shutoff If the Battery s power is running low the unit will automatically stop operating to protect the battery Charge the battery immediately To recharge your Battery 9 using the Car Adapter 16 Step 1 Insert the cord end of the Car Adapter 16 into the outlet on the back of the Spotlight Plug the plug end of the Car Adapter 16 into your car s lighter For the initial charge the Spotlight must b2. wire connections from the old battery Attach these two wire connections to the new replacement battery NOTE Make sure red battery wire connects to red battery terminal and black battery wire connects to black battery terminal Carefully slide the new Battery into Housing 1 making sure that the wires are not damaged Slide Battery Cover 15 back into place 03358 REV 06 03 REV 06 04 Page 3 Warning Battery Disposal The Spotlight is powered by a battery which will have a long life span When the battery is no longer functioning it should be removed from the Spotlight and properly recycled Many states require recycling Contact your local solid waste authority for information on recycling Before disposing of the battery wrap exposed terminals with heavy tape to prevent a shorting condition which could cause fire and or injury NEVER EXPOSE THE BATTERY TO HIGH HEAT OR FIRE BATTERY MAY EXPLODE UNDER THESE CONDITIONS PLEASE READTHE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM INTHIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT ORTHAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LI
3. CENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTSTHERETO 03358 Page 4 REPLACINGTHE BULB E Take away the pin on the back of the reflector Step 2 Take out the old bulb with cord Step 3 Pull out the old bulb from the cord connection Replace cord connection and reassemble by reversing the steps shown above 03358 REV 04 03 Page 5 Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Parts Diagram 14 l0 6 Es 25 M PO i Parts List 1 ABS HOUSING 6 CHARGER PLUG 11 TRIGGER 2 REFLECTOR GLASS 7 CIRCUIT BOARD 12 HANGING STRAP 3 BULB SWITCH 13 TRIPOD ADAPTER 4 GLASS 9 BATTERY 14 CUSHION GRIP 5 LAMP LID 10 LOCKING TRIGGER HOLD 15 BATTERY COVER 16 CAR ADAPTOR 17 AC DC ADAPTOR 03358 REV 04 03 Page 6
4. CHICAGO 3C YeijiteiPower Tools SPOTLIGHT 1 000 000 CANDLE POWER ASSEMBLY amp OPERATING INSTRUCTIONS n 3491 Mission Oaks Blvd Camarillo CA 9301 1 Copyright 2002 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For Technical questions and replacement parts please call 1 800 444 3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product For future reference please complete the owner s record below Model Serial No Purchase Date SAVE THE RECEIPT WARRANTY AND THESE INSTRUCTIONS It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly Technical Specifications Tool Name Spotlight 1 000 000 Candle Power Item Number 03358 Housing Diameter 6 Battery 6 VDC 5AH ULL Listed Lens Adapter 5 Lens Construction 3 16 Glass Candle Power 1 000 000 Light Source Quartz Halogen Bulb 115W Handle 4 Pistol Grip Trigger Squeeze Type with Trigger Hold Power Adapter 120 VAC 60 Hz 6 VDC Charger U L Listed Car Adapter Lighter Type with 5 1 2 Cord Tool Weight 3 LBS i IMPORTANT SAFETY INSTRUCTIONS i READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situati
5. e charged for between 9 and 12 hours The red light will shut off automatically when the battery is fully charged Subsequent charges of the Battery will take approximately 5 to 8 hours Note When charging the Spotlight only place the Spotlight on a non flammable surface Important Always unplug the Car Adapter 16 from the Spotlight after the Spotlight is charged The Spotlight will not function properly if the Car Adapter is plugged into the Spotlight Tripod Adapter Step 1 Your Spotlight can be mounted onto a tripod or workstand neither is included At the bottom of the Trigger Grip Handle there is a Tripod Adapter 13 Thread the tripod or workstand into this Tripod Adapter On Off with Locking Trigger Hold Your Spotlight is equipped with a Trigger Hold to allow you to have the Spotlight on while leaving your hands free for work Step 1 To turn on your Spotlight press down on the Trigger 11 To lock on the Spotlight for an extended amount of time activate the Locking Trigger Hold 10 Push in on the Locking Trigger Hold button while the Trigger is depressed The Spotlight will stay on until the Locking Trigger Hold button on the other side of the handle is pushed in If there is any question about a condition being safe or unsafe do not operate the tool Replacing Battery When the Battery 9 is dead it can be easily replaced To replace battery slide off Battery Cover 15 and pull out Battery Remove red and black
6. ons that may occur It must be understood by the operator that COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTOTHIS PRODUCT BUT MUST BE SUPPLIED BY THE OPERATOR The Operator PLEASE REMEMBER Never look directly into the Spotlight Avoid touching the Lens as it may become hot during operation Do not dissassemble the Battery or remove any parts from the Battery and surrounding connections Do not allow the Spotlight to be exposed to fire or high heat as this may result in an explosion Grounding Voltage Warning Common household current is 110 120 volts As long as the outlet used with the tool is rated from 110 120V there will be no complications using it with household receptacles Plug the Power Adapter into a 110 120V properly grounded outlet protected by a 15 amp dual element time delay or circuit breaker NEVER try to plug a 110 120V tool into a 220 240V circuit or serious complications and possible injury to the operator may occur The plugs have different shapes to prevent this 03358 Page 2 Assembly Your Spotlight comes completely assembled When unpacking your Spotlight check to make sure that all the parts are included If any parts are missing or broken please call HARBOR FREIGHT TOOLS at 1 800 444 3353 Operation To assist you with operating your Spotlight please refer to Figure 1 and Figure 2 on page 4 and to the Parts List and Assembly Diagram located on page 5 Charging Your Spotlight Battery 9
Download Pdf Manuals
Related Search