Harbor Freight Tools 2448 User's Manual
Contents
1. a dry location away from children Cleaning and Replacing the Filter Disconnect Dust Collector from power source 2 Loosen the Cover Nut and remove the Screen Cover as shown on the Assembly Diagram on page 7 Lift the Filter from the Screen and clean with a blow gun The Filter will last approximately one year if cleaned properly with a blow gun after each use 3 Replace the Filter Screen Cover and Cover Nut Tighten Cover Nut PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 2448 Page 6 Parts List and Assembly Diagram TEM DESCRIPTION QTY 1 Suction Hose 1 2 Connecting Hose 1 2 1 O Ring 1 2 2 Connecting Nut 1 3 Castor 3 4 1 4 Nut 62. 5 1 4 x 3 4 Screw 3 6 1 4 x 5 8 Screw 6 7 1 2 Valve 1 8 Leg 3 9 Connecting Plate 3 10 Vacuum Body with Air Switch Assembly 1 a i5 11 Tank 1 12_ Tank Cover 1 14 13 Filter 1 14 Screen 1 13 15 Screen Cover 1 1 16 Cover Nut 1 j 12 17 Sand Buffering Device 1 d 3 u AW 2 NOTE Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 2448 Page 7
3. by a qualified technician Note Performance of this product if powered by line voltage may vary depending on variations in local line voltage Extension cord usage may also affect performance Special Warnings for This Product Store this product in a dry location Do not leave outdoors for extended periods of time Never use this product to pick up items that are smoking or burning Never pick up flammable or combustible liquids with this product SKU 2448 Page 3 3 Do not vacuum toxic carcinogenic combustible or other hazardous materials There are specialized products that are specifically designed to pick up these types of materials 4 Donotuse this product without a filter installed 5 Disconnect this product from its power source before changing the filter or adjusting the hose 6 Itis recommended that you empty the Tank after each use or when it is 3 4 full of materials Warning The warnings cautions and instructions discussed in this instruc tion manual cannot cover all possible conditions and situations that may oc cur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking check to make sure all parts listed on Page 7 are included If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual Assembly Refer to the Parts Lis
4. using this product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 Keep children away This product is not a toy Do not let children play with this product or its attachments Keep them away from all electrical cords Store idle equipment Store this product in a dry location when not in use and keep away from children Do not force product It will do the job better and more safely at the rate for which it was intended Do not use inappropriate attachments in an attempt to exceed the product capacity Use the right product for the job Do not attempt to force a small product or attachment to do the work of a larger industrial product There are certain applications for which this product was designed Do not modify this product and do not use this product for a purpose for which it was not intended Dress properly Do not wear loose clothing or jewelry as it can be caught in moving parts Wear restrictive hair covering to contain long hair Do not overreach Keep proper footing and balance at all times Maintain product with care Inspect regularly for safer performance Follow instructions for changing accessories SKU 2448 Page 2 10 11 12 13 14 15 Disconnect power Unplug product when not in use Avoid unintentional starting Be sure the switch is in the Off position when not in use
5. PNEUMATIC DUST COLLECTOR lelo 2448 ASSEMBLY AND OPERATING INSTRUCTIONS Distributed Exclusively by ida HARBOR FREIGHT Los TOOLS t 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2003 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specifications ITEM DESCRIPTION sd Max Working Pressure 125 PSI Overall Dimensions 21 1 2 Triangulation at Wheels x 30 3 4 H Castor Dimensions Qty 3 Swivel Housing w 2 Dia x 7 8 Wheels Tank Dimensions 2 7 8 Dia to 11 1 2 Dia x 20 1 2 H x 3 16 Thick at top Filter Paper 30 Micron capacity one year lifespan if cleaned with blow gun after each use Compatibility Can be used with any 10 60 Gallon Abrasive Blast Cabinets with a 1 1 4 Dia Outlet Net Weight 18 8 Lbs Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When
6. and before plugging in Stay alert Watch what you are doing use common sense Do not operate any product when you are tired Check for damaged parts Before using any product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment and binding of moving parts any broken parts or mounting fixtures and any other condition that may affect proper operation Any part that is damaged should be properly repaired or replaced by a qualified technician Do not use the product if any switch does not turn On and Off properly Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty Only use accessories intended for use with this product Approved accessories are available from Harbor Freight Tools Do not operate product if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not operate the product Use proper size and type extension cord If an extension cord is required it must be of the proper size and type to supply the correct current to the tool without heating up Otherwise the extension cord could melt and catch fire or cause electrical damage to the tool Maintenance For your safety service and maintenance should be performed regularly
7. nnection QUICK QUICK QUICK Goe R COUPLER CONNECTOR OILER R FILTER j pe he S ee Eon On ie Ee j f i i TER EEA AIR HOSE COUPLER REGULATOR Note Air Compressor is not supplied 1 3 You will need to prepare a 1 2 Air Connector not included with this product and connect it to the valve located on the Vacuum Body with Air Switch Assembly Wrap the Air Connector with a pipe thread seal tape before connecting to a 3 8 D Air Source Hose not included Connect the Air Source Hose to the Valve Air pressure should not exceed 125 psi This air powered product requires lubrication during operation For best results it is recommended to have an oiler and water filter in line with the air supply as shown This will extend the life of the product Operation The product is intended for use with a 10 60 gallon Abrasive Blast Cabinet not included Read all instructions for Operating the Sand Blast Cabinet before using this product 1 Follow instructions in Step 8 above for connecting the Hose to the Sand Blast Cabinet Connect the Dust Collector to the Air Compressor according to the instructions on Page 5 Air Connection Use the Air Switch attached to the Air Switch Assembly to control the amount of air flow through the product Air Compressor pressure should not exceed 125 psi SKU 2448 Page 5 4 Disconnect the product from the Air Compressor when not in use and store in
8. t and Assembly Diagram on Page 7 for all parts numbers 1 Assemble your Dust Collector on a clean level surface 2 First arrange the three Connecting Plates 9 on the ground in the shape of a triangle At one of the joining points between two of the Connecting Plates position one of the Legs 8 perpendicular to the ground as shown in the Assembly Diagram Attach the two Connecting Plates and the Leg using a 1 4 x 3 4 Screw 5 and a 1 4 Nut 4 Repeat to secure to other two Legs 3 Position the Tank 11 between the three Legs and secure in place using the six 1 4 x 5 8 Screws 6 4 Place the Tank Cover 12 on top of the Tank and fasten the metal latches 5 Ifthe Filter 13 is not already in place insert a clean Filter into the Screen 14 cover with the Screen Cover 15 and fasten the Cover Nut 16 6 To attach the Castors 3 slide pegs at the top of each Castor through the holes in the bottom of the base you built in Steps 1 3 and secure with Nuts SKU 2448 Page 4 COLLECTOR Fit Suction Hose 1 over the Vacuum Body with Air Switch Assembly 10 To connect the Hose to an Abrasive Blast Cabinet not included unscrew the Connecting Nut 2 2 and remove the O Ring 2 1 Fit the Connecting Hose 2 into the 1 1 4 Dia outlet in the Blast Cabinet Reaffix the O Ring and the Connecting Nut to the Hose from the inside of the Blast Cabinet Be sure the Hose is tightly connected before use Air Co
Download Pdf Manuals
Related Search