Harbor Freight Tools 2_1/2 in. Table Swivel Vise Product manual
Contents
1. be performed Use of the product for operations different from those intended could result in a hazardous situation SERVICE Have product serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the product is maintained Maintain labels and nameplates on the product These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement MISCELLANEOUS Keeps hands clear while closing Jaws can damage workpieces Do not overtighten Keep the face of the Jaws clean Vise may chip if struck with another hardened tool damaging Vise and possibly causing injury Inspect before use discard if chipped The warnings precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator AXSAVE THESE INSTRUCTIONS For technical questions please call 1 800 444 3353 Page 2 Clamp SPECIFICATIONS Capacity Tables up to 1 5 8 IN Thick Adjusts 360 at Base and Jaw Maximum Jaw Opening 2 IN Maximum Vise Travel 2 IN aws A 2 1 2 IN L x 5 8 IN H SET UP INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadi2. Forge 2 1 2 Table Swivel Vise Item 97160 AWARNING Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 800 444 3353 as soon as possible Visit our website at http www harborfreight com Email our technical support at tech harborfreight com Copyright 2010 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Revised Manual 11f SAVE THIS MANUAL Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference WARNING Read all instructions Failure to follow all instructions listed below may result in serious injury SAVE THESE INSTRUCTIONS WORK AREA SAFETY 1 Keep children and bystanders
3. away while operating Distractions can cause you to lose control 2 Keep work area clean and well lit Cluttered or dark areas invite accidents PERSONAL SAFETY 1 Wear ANSI approved safety goggles NIOSH approved dust mask respirator and heavy duty work gloves during installation or during use when conditions warrant 2 Stay alert and use common sense when operating Do not use when tired or under the influence of drugs alcohol or medication 3 Do not overreach Keep proper footing and balance at all times This enables better control in unexpected situations 4 Dress properly Do not wear loose clothing or jewelry Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts PRODUCT USE AND CARE 1 This product is not a toy Keep it out of reach of children 2 Use the correct product for your application The correct product will do the job better and safer at the rate for which it was designed Do not modify this product or use it for a purpose for which it is not intended SKU 97160 Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the product s operation If damaged have the product repaired before use Use the product in accordance with these instructions and in the manner intended for the particular type of product taking into account the working conditions and the work to
4. cal questions please call 1 800 444 3353 Part ___ Description Qty 9 Nut 15 ClampJaw _ d eee Se eee j To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 Page 4
5. month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 97160 For technical questions please call 1 800 444 3353 Page 3 PARTS LIST amp ASSEMBLY DIAGRAM Description Qty 1 LeadScrew Tt 2 MovingHead 1 3 Diamond Jaw Plate _ _ 1 6 8 1 1 1 Jaw Screw Swivel Head Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS SKU 97160 For techni
6. ngs therein before set up or use of this product Note For additional information regarding the parts listed in the following pages refer to the Assembly Di agram near the end of this manual Connect the Clamp to a work surface The work surface must be able to hold the combined weight of the Vise and intended workpieces 2 For heavy duty use or long term installation mount the Vise directly to the work surface Use the holes in the Vise as a template to mark the work surface Verify that installation surface has no hidden utility lines before drilling or driving screws Drill holes and attach the Vise firmly to the work surface with appropriate hardware O PERATING INSTRUCTIONS A Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product 1 Choose the Jaws that are most appropriate for the job 2 Loosen the T handles and turn the Vise in the best position for the job Tighten the T handles 3 Turn the Handle to open the Jaws of the Vise Place the workpiece between the Jaws and close the Vise The Jaws can damage soft workpieces do not overtighten 4 CI ean then store the product indoors out of children s reach REV 11f MAINTENANCE AND SERVICING ACAUTION Damaged products can fail causing personal injury Do not use a damaged product If abnormal noise or vibration
7. occurs have the problem corrected before further use 1 BEFORE EACH USE inspect the general condition of the product Check for loose screws misalignment or binding of moving parts cracked or broken parts and any other condition that may affect its safe operation 2 AFTER USE clean external surfaces of the product with clean cloth 3 Keep the Vise well lubricated Clean Jaws to prevent soiling workpieces Replacing the Jaws To replace or attach different jaws Use a screwdriver to remove the screws in the face of the jaw Attach the new jaws with the same screws PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYERASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Record Product s Serial Number Here Note If product has no serial number record
Download Pdf Manuals
Related Search