Harbor Freight Tools 100 Hook Key Box Product manual
Contents
1. 100 HOOK KEY BOX 95318 INSTRUCTIONS AND PRECAUTIONS Visit our website at http www harborfreight com SAVE THESE INSTRUCTIONS READ ALL PRECAUTIONS AND INSTRUCTIONS SPECIFICATIONS 20 gauge sheet steel Dimensions 21 5 8 H x 14 3 4 W x 3 1 8 T Two brass locking keys Accessories Number identification sheet 100 Thermoplastic key tags UNPACKING When unpacking make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at 1 800 444 3353 as soon as possible IMPORTANT SAFETY INFORMATION Assembly Precautions 1 Mount only according to these instructions Improper mounting can create hazards 2 Wear ANSI approved safety goggles and heavy duty work gloves during mounting 3 Verify that installation surface has no hidden utility lines before drilling or driving screws Be careful of sharp corners during mounting 5 Do not mount the Key Box when tired or when under the influence of drugs or medication Use Precautions 1 This product is not a toy Do not allow children to play with keys or the Key Box Use as intended only Keep locking keys stored in secure location away from children 4 The brass components of this product contain lead a chemical known to the State of California to cause birth defects or other reproductive harm California Health amp Safety code 25249 5 et seq 5 Mainta2. THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Page 2
3. the holes drilled into the wall Use the included mounting screws to fasten Key Box to wall 6 Continue to tighten the screws until the Key Box is fastened securely in place INSTRUCTIONS Hook the multi colored strips with key hooks in the spacers along the inside of the cabinet and along the door Be sure they are attached level and evenly spaced 2 Come up with an organizing system that best suits your purpose for the Key Box For example the multi colored strips could indicate which floor an auto is located on or which area the car is parked The corresponding Key Tags in the poly bag can also work as a location or identification device A numbered identification sheet is installed inside the Key Box to also help with organization See photo above 3 For security or for keys left unattended use the provided keys to lock the Key Box 4 To label the key tags remove the key ring from the hole in the tag Slide the plastic cover out through the slot in the tag Mark the label and replace the plastic slip cover and key ring 5 Keep Key Box clean and organized Wipe off dust using a damp cloth Then dry SKU 95318 For technical questions please call 1 800 444 3353 Key Hook Strips Key Tags Identification Sheet Record Serial Number Here Note If product has no serial number record month and year of purchase instead Note There are no replacement parts available for this Key Box PLEASE READ
4. in product labels and nameplates These Copyright 2006 by Harbor Freight Tools All rights reserved No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this document may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included For technical questions or replacement parts please call 1 800 444 3353 Revised Manual 10a carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement MOUNTING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY A INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product Set the Key Box up on the location where you wish to mount the Key Box Use a pencil to mark the location of four mounting holes Set the Key Box aside 2 NOTE It is best to mount on a wood surface If not available use the included dry wall anchors when mounting 3 Drill four holes of the appropriate size where previously marked with a pencil into the wall 4 CAUTION Before drilling holes verify that there are no hidden electrical wires or cords under mounting area 5 Line up the four mounting holes on the back of the Key Box with
Download Pdf Manuals
Related Search