Harbor Freight Tools 0.19 Cubic Ft. Electronic Digital Safe Product manual
Contents
1. 353 Page 5 Maintenance 1 Protect the Safe from moist or wet conditions 3 Occasionally apply a small amount of light Moisture may cause electronic damage in oil or lock lubricant to the mechanical lock the keypad or corrosion of the steel mechanism Be careful not to get any oil or other liquids on or near the electronic mechanism 2 Occasionally wipe the safe and keypad clean with a soft dry cloth or brush Bunker Hill Security Page 6 For technical questions please call 1 800 444 3353 Item 94985 Replacing the Batteries 1 If the Red Light illuminates the 4 Remove used batteries Batteries need to be changed Dispose of them properly or recycle them 2 Follow the instructions for opening the Safe 5 Insert four new AA Batteries in their place Position batteries in proper polarity and do not install batteries of different types charge levels or capacities together 6 Reinstall battery cover by placing it low against the Battery Compartment and snapping it into place Figure E 7 After changing the batteries test the Code and 3 The Battery Compartment is located on change it as needed before closing the Door the inside of the Door Unsnap the Battery Cover from the Battery Compartment Bunker Hill Security Item 94985 For technical questions please call 1 800 444 3353 Page 7 Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet hig2. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference Bunker Hill Security Electronic Digital Safe Batteries sold separately To ensure security of your safe Bunker Hill Security does NOT provide replacement keys Visit our website at http www harborfreight com REV 13h Email our technical support at tech harborfreight com ITEM 94985 When unpacking make sure that the product is intact and undamaged If any parts are missing or broken AWARNING please call 1 800 444 3353 as soon as possible Copyright 2006 by Harbor Freight Tools All rights reserved i No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Specifications Overa
3. e 4 User Code of changing the code a Press the Code Reset Button until the Yellow Light On the inside of the Door near the hinge on the Front Control Panel lights up there is the small red Code Reset Button BESOA b Input your new Code 3 to 8 digits into the Key Pad followed by A beep will sound for every digit entered c The green light will go on to confirm that the Code has been changed Page 4 For technical questions please call 1 800 444 3353 Item 94985 Important The knob on the door must be turned b Once the latch is in the locked position within 5 seconds of the green light coming on or the use the new Code to open the latch code will be rejected and must be entered again and ensure that it works 5 With the door still open test the new code Note If desired make a note of the a First extend the door lock latch to the locked new Code and store it in a safe place position by turning the Knob counterclockwise Closing AWARNING Keep closed and locked whenever unattended Check inside before closing Do not allow children to play with or near safe Keep keys and codes away from children 1 Close the door and turn the Knob counterclockwise 2 Pull on the door to make certain it is properly locked J J J SS RS mn 7 WY 7 VS 0S HO w ASA T 7 Ta S Fa Q Ta S Knob Figure D Bunker Hill Security Item 94985 For technical questions please call 1 800 444 3
4. ection at the beginning of this document including all text under subheadings therein before set up or use of this product Opening with Code Green Light Red Light Yellow Light Note The Safe comes preset with a code of 1 5 9 Knob Ready Low Battery Proceed 1 Press the numbers 1 5 9 onthe Key Pad then press either the A or B Key Note The Yellow Light will illuminate each time a key is pressed If it does not open the safe with the key see below and replace the batteries see Figure E 2 Once the Green light is on a turn the Knob clockwise and b pull the Door open Note Three wrong entries will Key Hole A Key B Key disable the Key Pad for 20 seconds Figure A Opening with Key Note The Manual Override Key is used to open the safe if you forget your PIN if the batteries are not installed in the safe or if the batteries are dead Do not store keys in safe ea 0 B 1 Atthe center of the Safe door is the Key Hole for the Override Key es es es Ge 0 IEN ZN 2 Insert Override Key into the lock and turn counterclockwise Then a turn the Knob clockwise and b pull the Door open Changing the Code Note The Safe comes preset with a code of 1 5 9 1 Follow the instructions for opening the Safe to open the door 2 Make sure that the Override Key is available before changing the code Figure C 3 Keep door open during the entire procedur
5. h quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of o
6. ll Dimensions 9 L x 6 3 4 W x 6 3 4 H A AA sold separately IMPORTANT SAFETY INFORMATION Installation Precautions 1 Verify that installation surface has no hidden utility lines before drilling or driving screws 2 Wear ANSI approved safety goggles during installation oa Mount securely before use Install only according to these instructions Improper installation can create hazards Use Precautions 1 Keep closed and locked whenever unattended RISK OF CHILD ENTRAPMENT AND SUFFOCATION Check inside before closing Do not allow children to play with or near safe Keep keys and codes away from children 2 Keep clear of door when closing 3 Position batteries in proper polarity and do not install batteries of different types charge levels or capacities together 4 Use as intended only 5 Inspect before every use do not use if parts are loose or damaged 6 Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement 5 Keep installation area clean and well lit 6 Keep bystanders out of the area during installation 7 Do not install when tired or when under the influence of alcohol drugs or medication 8 Place the Safe on correct surface Only use this Safe on a stable level clean and dry surface that is capable of sustaining the load 7 Donot store Keys inside of the Safe Place
7. the emergency keys in a location outside of the safe making sure they are in a secure location that you can find 8 Warning The brass components of this product contain lead a chemical known to the State of California to cause birth defects or other reproductive harm California Health amp Safety code 25249 5 et seq 9 The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator 10 The Safe is not fireproof NOTE Harbor Freight Tools is not responsible for the loss of any property stored within this safe due to theft fire or any other circumstance Bunker Hill Security Page 2 For technical questions please call 1 800 444 3353 Item 94985 Mounting the Safe 1 To mount the Safe to a wall or surface use 2 Use wall anchors not included as necessary a drill to set the path for each Sheet Metal Screw Make certain that the drilling 3 Insert the Screws included through each path is clear and free of obstacles such drilled hole and into a stud to secure as wires cables and electrical lines the Safe to the desired surface Bunker Hill Security Item 94985 For technical questions please call 1 800 444 3353 Page 3 Read the entire Important Safety Information s
8. ur warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state Record Serial Number Here Note If product has no serial number record Note Replacement parts are not available for this item month and year of purchase instead Bunker Hill Security 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353
Download Pdf Manuals
Related Search