Hannspree LT13-23A1 User's Manual
Contents
1. eh jm o0000 DVD LINE IN ANT DC IN A A AA QG ke e E E Eg Esc E amp aa SS Ss E E o Eh E SS H ps BI AV1 AV cables Cables and connectors are color coded red blue green HANNSpree 27 Connecting to a Video Camera using S Video The following illustration shows how to connect the TV toa camcorder using the AV2 S video port Actual connections may vary according to the make and model of the device Refer to the user s manual included with the camcorder for more detailed instructions HANINSPree Video cable Audio cable Note When connecting the S Video Cables and connectors are color connector and AV connectors at the coded red white yellow same time the priority is given to the S Video connector 28 Hannspree Connecting to a VCR VCD or DVD Player using composite video The illustration presented here shows how to connect your TV to a VCR VCD or DVD player using the AV3 composite video port Actual connections may vary according to the make and model of your device Refer to the user s manual included with the AV device for more detailed instructions A V cable Cables and connectors are color2. 32 Hannspree Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated 2 Plug the power adapter connector into the DC IN on the rear panel of the TV 3 Plug the three pronged plug at the other end of the power cord into a power outlet Power outlet Three pronged plug Power cord Power adapter Hannspree 33 Using the TV Using the Remote Control For best result use the remote control within a distance of 6 meters 20 feet from the front of the TV s signal sensor Do not exceed an angle of 30 degrees when pointing at the signal sensor Refer to the following illustration 34 Hannspree Turning the TV On and Off 1 Press the POWER button on the remote control or on the TV control MAIN CATV CH 033 panel The power LED indicator on the front of the TV changes from red to green indicating that the power is on 2 Press the POWER button again The power LED changes from green to red indicating that the TV is off Power button and LED Selecting Channels 1 Press the CH A button to increase the channel number by one 2 Press the CH YW button to decrease the channel number by one MAIN CATV CH 033 3 Enter the specific channel number by press
3. SELECT lt lt gt ADJUST MENU CLOSE 1 Press the CHANNEL A or V button to select PRESET 2 Press the VOLUME Aor V button ON appears in the brackets All audio settings are returned to the factory set default values Note The preset function erases all of your custom audio settings Hannspree DS TV Settings MAIN MENU POWER SOURCE A A TV VOLUME CHANNEL V 7 SELECT lt gt ENTER MENU CLOSE MENU S video Video Press CHANNEL A or to Press MENU to enter the OSD select TV Main Menu screen Press VOLUME A or to enter the TV Menu Notes e Operate the OSD with either the remote control or the front panel con trol e The TV OSD menu is not available if the input source is not TV 56 HANNSpree TV CATV TV TV CATV CATV J ZS SELECT lt lt gt ADJUST MENU CLOSE 1 Press the CHANNEL A or V button to select TV CATV The current setting is shown in brackets 2 Press the VOLUME A button to select CATV in order to receive cable TV signals A Press the VOLUME Y button to select TV in order to receive broadcast TV signals Note The default TV setting is CATV HANNspree 97 MTS 1 Press the CHANNEL Aor V button to select MTS The TV MTS MAIN j current setting is shown in brackets 2 Press the VOLUME A org 4 SELECT lt gt ADJUST MENU
4. pree POWER ss _SOURCE 8 ES a a VOLUME CHANNEL Oooo POWER SOURCE Description Power button and LED 2 Adjust volume 20 Hannspree A A VOLUME CHANNEL V V 2 3 4 5 Function Turns the TV on and off The green LED indicates power on In PC mode amber light indicates sleep status Press the A button to increase the volume Press the V button to decrease the volume These buttons are also used to navigate OSD menus Description Infrared sensor Select channel Source Menu Mute Speakers Function Point the remote control towards the sensor to operate the TV Changes the channel Press A to increase the channel number Press V to decrease the channel number These buttons are also used to navigate OSD menus Selects the input source to be displayed TV AV1 AV2 AV3 AV4 or PC Turns the on screen display OSD menus on and off Press this button to disable sound Press this button again or press the volume adjust buttons directly to restore sound In PC mode press this button to automatically adjust the screen for your PC s display adapter Produce high quality sound Hannspree 21 Front View Ports Description 1 AV4 2 Earphone line out Function Use the AV
5. 75 Hz 832 X 624 75 Hz Mac 60 Hz 70 Hz 1024 X 768 75 Hz 75 Hz Mac HANNspree f f Glossary Aspect Ratio The ratio of width to height of a film image or display screen BBE A proprietary audio enhancement technology BBE compensates for distortion common to loudspeakers Broadcast TV Broadcasting video signals using high frequency electromagnetic waves to distribute television channels to viewers standard TV broadcast CATV Community Antenna Television the original name for cable TV A television distribution system that uses coaxial cable instead of the traditional radio broad casting over the air method to deliver television FM radio and other services to consumers Color Temperature Adjusting the color temperature enables you to set the inten sity of white light Color temperature is measured in Kelvin K Higher color tem peratures result in a blue tint Lower temperatures result in a red tint EALA 3D surround sound enhancement technology that provides a more immer sive and realistic soundscape Hue Colors in a color system are measured by hue saturation and luminance Hue indicates the predominant color LCD Liquid Crystal Display A display technology that uses rod shaped molecules liquid crystals that flow like liquid and bend light MTS Multi channel Television Sound Enables reception of audio other than the primary MAIN audio signal DUAL enables reception of a stereo audio si
6. For best results use a clean lens cloth to remove dust and fingerprints from the screen Do not wipe the shell of the TV with alcohol methanol gasoline or oil products to avoid damaging the finish Wipe the shell with a dry soft cloth and use neutral cleaning fluids If your TV model has leather components wipe the leather parts with a dry cloth and keep the area dry Place the TV far from sources of steam to avoid making the leather wet Be careful to remove the power plug correctly Hold the plug instead of pulling the power cord Arrange the power cord with other cords to avoid knotting or bending which may cause fire due to damage or electric leakage Troubleshootin Situation No picture and sound No picture or poor picture sound is OK Picture is not in color Picture is OK no sound One of the speakers has no sound Can t receive some TV channels using cable TV Want to reset TV settings Cannot operate menus No image but sound available Solution Connect the power cord properly Press the POWER button on the control panel or remote control Press the SOURCE button to cycle through connected video sources Press the CHANNEL UP or CHANNEL DOWN button to switch to other TV stations Check the TV CATV OSD settings See TV CATV on page 57 Make sure all cables are connected properly Check the antenna and cable connections Adjust the brightness in the OSD menus S
7. HANNSpree HANNSpree Inc 2F No 362 Ruei Guang Rd Neihu District Taipei City 114 Taiwan R O C TEL 886 2 87520000 FAX 886 2 87527092 www hannspree com BBE SRS i TruSurround _eala NTSCTVTWENO804 MAC 001226 HANNSpree 23 Liquid Crystal Display Television LT13 23A1 User s Manual Table of Contents 1 Warranty and Service cece eee ence ee eeee tease enaeeeaes 4 ee Ne E 5 3 Description of Warning Gvmbols cece cence eens 6 e EK e uer T 5 Regulatory Information ccc cece cece cece eee eeeeeeeeee ens 15 6 Mirodu cing the EE 17 FEAE EE 18 7 Checking Package Contents cece cence eeeee ees 19 8 Getting to Know Your IV 20 Front View Controls ccccc cece cece cece eeeeeeeeeeeeneeens 20 Front View e EE 22 Rear Panel Input and Output Portes 23 o CUMING SACO EE 25 Making Connechons cece cece cence cess eeaeeeeaeeees 25 Connecting to an Antenna or Cable Ve 26 Connecting to AV Devices ccc cece eee e eee eeenee ees 27 Connecting to a VCR VCD or DVD Player using component videgn ccc eee eee cece eee eeneeeeeeeneeeeees 27 Connecting to a Video Camera using S Video 28 Connecting to a VCR VCD or DVD Player using composite video 29 Connecting Earphone cc ccc cece cece eee eeeeeeeeeens 30 Connecting an Amplifier or Speaker 31 COMMG CHG to a E 32 Connecting the Power Adapter ees 33 AO USINO CG EE 34 Using the Remote Control
8. coded red white yellow HANNspree 29 Connecting Earphone You can use earphone to listen to the TV instead of using the built in speakers Connect earphone to the earphone line out port as illustrated Earphone Earphone port Note Earphone is not included with the product 30 HANNSpree Connecting an Amplifier or Speakers Connect an external amplifier or soeakers to the line out port to provide better sound quality Refer to the following illustration Amplifier and speakers f i w O O l am u O00000000 f HANNSPree A al o O PRE oO EI e pe e Eo O O 00000000000 Line out Hannspree 31 Connecting to a PC Connect the TV to your PC to use it as the monitor using the DVI port as shown Connect the DVI port of the TV to the DVI output of the PC Connect the line out port of the PC to the line in port of your TV to listen to audio from the PC Note When changing from TV mode to PC Pare mode the Power LED changes to amber 000000090 0 se ss indicating that the pc is in sleep status o o o o o Line in b oos B foro Gis IE COD Eh Ep fa
9. 34 Turning the TV On and Ont 35 Selecting Channels cece ecceeeeeeeeneeeeaeeenaees 35 Adjusting the Volume EE 36 Switching Source Signals ccc cece eee ee eeeeeeeeeeaees 36 SUA MM PA PO EEN 37 HANNspree 1 Table of Contents 11 Adjusting On Screen Display OSD Settings 39 OSD Setting UE UE 39 Picture Settings cc ccc cece cece eee e eee eeeeeeeeaeeeseeeeas 40 Ey GUNN EE 41 Contrast EE EE 42 Backlight PC model 43 el 44 SUNAO EE 45 SONS SS eege Eege 46 Bl ck EE 47 Color Temperature 48 i EE 49 PUTO OGORIN EE 50 Ren 51 KE 52 Balance EEN 53 BBE TruSurround and EALA ccceee eee ee 53 tal Lat EE 54 OSCE E 55 TY SEINO EE 56 TN GAT ee 57 VK 58 AUO SCAN EE 59 Channel Add Erase cece eee neeeeeeeeeenaeeees 60 Favorite Channel 61 mero de e Coe a ee ee ee ee 62 East 63 COG enee 64 Auto AGUSTIN GT EE 65 DOS WOO eegene tee 65 Horizontal bosmton cc ccc cece cee e eee eee ee eee eeees 66 Vertical Hosmtton cece cece e ee ee eee eee eeneeeeeenes 67 Miscellaneous Settings cccc cece ecee cece eeeeeeeeeee ees 68 2 Hannspree Table of Contents WV viciss ic Gage dE EEN 69 Ez igh 0 0 eee eee ane nee eee ee 69 ZGleener enonesruk r ren EA rian 70 TANG a tirae A E ueeeaseetaeens I 12 Taking Care of vourfN cence eee eeeneeeeeaees 72 t3 Troubleshooting cansarse AE 73 tA PECCO ON EE 75 PIP Operation Mode 76 Computer Compatibility Char
10. In addition read the following Safety Notices on page 7 carefully before using the product to ensure that your TV s safety D Hannspree Safety Notices E Power Supply Safety Notes To avoid electric shocks do not use an extended power cord or an outlet that does not match this product s plug or leaves the plug exposed This product has a 3 pin grounded plug The third pin connects to ground do not remove it If the power cord or plug is damaged or worn unplug it immedi ately and contact a qualified service technician for mainte nance To avoid fire or electric shocks do not overload electric power outlets A Installation Safety Notes Antenna We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system You may however use an antenna indoors if it is placed in a location free from interference Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat HANNSpree f MN Before You Proceed 1 Read the Safety Notices and the User s Manual carefully before turning the product on Keep your User s Manual in a safe place for future reference Keep the box and packaging in case the product needs to be shipped in the future Follow the product and warning label instructions Any change
11. lt 50 button to select CONTRAST The slider bar shows the current setting 2 Press the VOLUME A button to increase the contrast 3 Press the VOLUME button to decrease the contrast SELECT lt lt gt ADJUST MENU CLOSE Note The new setting is confirmed automati cally when the OSD times out commer o 42 Hannspree Backlight PC mode PICTURE BACKLIGHT HIH 100 7 SELECT lt gt ADJUST MENU CLOSI 1 Press the CHANNEL Aor V button to select BACKLIGHT The slider bar shows the current setting 2 Press the VOLUME A button to increase the backlight intensity 3 Press the VOLUME button to decrease the backlight intensity Note The new setting is confirmed automati Cally HANNspree 43 Hue 1 Press the CHANNEL Aor V button to select HUE The slider bar shows the current setting 2 Press the VOLUME A button to increase the hue A Press the VOLUME button to decrease the hue PICTURE HUE UT eenn 50 7 SELECT lt lt gt ADJUST MENU CLOSE Note The new setting is confirmed automati cally when the OSD times out 44 nannspree Saturation PICTURE SATURATION UT enn 50 SELECT lt gt ADJUST MENU CLOSE 1 Press the CHANNEL A or button to select SATURATION The slider bar shows the current setting 2 Press the VOLUME A button to increase the saturation 3 Press the VOLUME button to decrease the saturation Note The new settin
12. CLOSE button to select from the various MTS options e MAIN select the main audio signal e SAP select the secondary audio signal e DUAL enable both pri mary and secondary audio signals The primary signal is output through the speakers The secondary signal is output through the earphone e EX DUAL exchange the primary and external sec ondary audio signals for speakers and earphone i e the primary signal is output through the ear phones and the secondary signal is output through the speaker Note If no secondary language is avail able the MTS setting is always set to the main audio signal 58 HANNSpree Auto Scan TV AUTO SCAN OFF SELECT 4 ADJUST MENU CLOSE 1 Press the CHANNEL A or V button to select AUTO SCAN The current setting is shown in brackets 2 Press the VOLUME A button to enable auto scanning ON is displayed in brackets and the TV starts scanning automatically for TV channels Note The TV screen displays the current channel that is successfully tuned after scanning is completed HANNspree 59 Channel Add Erase 1 Press the CHANNEL A org button to select CH ADD ERASE TV CH ADD ERASECTADD J The current setting is shown in brackets SELECT at AD UST MENU CLOSE 2 Press the VOLUME A button to add the current channel 3 Press the VOLUME button to delete the current channel Note You can still access the erased
13. Resolution TV System Video System Component Format Audio System Built in stereo audio amplifier Power Supply Power Consumption Weight including base Dimensions including base LT13 23A1 23 inch TFT 15 9 1280 horizontal x 768 vertical NTSC AV1 Component Video RCA jack YPbPr AV2 Composite Video RCA jack yellow S Video AV3 Composite Video RCA jack AV4 Composite Video RCA jack yellow S Video 480i 480p 576i 576p 720p 1080i AV1 AV2 AV3 AV4 L R RCA jacks audio input 8 mm line in jack audio input 3 5 mm earphone and L R line out jacks audio output 7 5W 7 5W 100 240V 50 60 Hz 20V DC lt 150W 16 35 KG 515 mm H x 596 mm W x 237 1 mm D HANNspree f9 PIP Operation Mode The following table shows which main sources are compatible with PIP and POP sources Main Source PIP Source POP Source AV2 AV1 AV3 YPbPr or YCbCr AV4 TV2 AV2 AV2 AV2 S or CVBS A E AV4 AV4 TV2 TV2 AV2 AV2 AV3 CVBS ES SC AV4 AV4 TV2 TV2 AV2 AV2 AV4 S or CVBS Front N Ne AV4 AV4 TV2 TV2 AV2 AV2 TV AV3 AV3 AV4 AV4 TV2 TV2 AV2 AV2 PC AV3 AV3 AV4 AV4 TV2 TV2 76 nannspree Computer Compatibility Chart The following table shows resolution and frequency values supported by the TV Resolution Frequency Remarks 640 X 400 70 Hz 60 Hz 67 Hz Mac 640 X 480 72 Hz 75 Hz 56 Hz 60 Hz 800 X 600 72 Hz
14. channel by entering the channel number using the number buttons on the remote control Add the channel again if it was erased accidentally 60 HANNSpree Favorite Channel 1 Press the CHANNEL Aor V button to select FAV CHANNEL 2 Press the VOLUME A org button to enter the 4 SELECT gt ADJUST MENU CLOSE FAV CHANNEL menu TV FAV CHANNEL 3 Press the CHANNEL A or V button to select a favorite FAV CHANNEL SETTING channel number 1 4 4 Press the VOLUME A or V 4 SELECT lt gt ADJUST MENU CLOSE button to choose a channel to assign to the favorite channel number you selected in step 3 Note Assigning a channel to one of the four favorite channel numbers replaces a previously stored channel assignment Hannspree 61 PC Settings POWER SOURCE A A VOLUME CHANNEL V V 7 SELECT lt gt ENTER MENU CLOSE MENU S video Video L R Press CHANNEL A or to Press MENU to enter the OSD select TV Main Menu screen Press VOLUME A or to enter the TV Menu Notes e Operate the OSD with either the remote control or the front panel con trol e The PC OSD menu is not available if the input source is not PC 62 Hannspree Phase PC PHASE UT i 15 7 SELECT lt gt ADJUST MENU CLOSE 1 Press the CHANNEL Aor V button to select PHASE The slider bar shows the current setting 2 Pre
15. where they exit from the apparatus Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Only use attachments accessories specified by the manufacturer Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as if the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or mois ture does not operate normally or has been dropped Hannspree 11 Personal Safety 412 Hannspree To avoid overloading the power supply do not plug too many electrical devices into an outlet or extension cable Dangerous high voltage electric power compo nents are located inside the TV To avoid electric shock do not disassemble the casing Do not place or drop metals small objects or flammable materials in the vent to avoid an elec tric shock or a fire If the TV is dropped falls down or is otherwise damaged unplug the power cord immediately and notify a qualified service technician If any fluid is sprayed or dropped into the TV remove the power plug immediately and notify a qualified service technician The scree
16. 4 input to connect an external device such as a VCR or a VCD DVD player Audio Input L R white and red audio cables Video Input S Video or Video yellow video or S Video cable Connects to earphone 22 Hannspree Rear Panel Input and Output Ports LINE OUT AVI AV2 AV 3 LINE IN L I l l I SL R L v s R PR PB Y R L L V ANT DC IN Description Function 1 DVI Connects to a PC s DVI port 2 Line in Connects to a PC s line audio out port Connects to external amplifier or 3 Line out speakers HANNspree 23 Description 4 AV 1 5 AV2 6 AV3 Antenna cable TV line in 8 DC IN Function Use the AV1 input to connect an external device such as a VCR or a VCD DVD player with a component output Audio Input R L white and red audio cables Video Input Y PB PR video cables Use the AV2 input to connect an external device such as a VCR or a VCD DVD player Audio Input R L white and red audio cables Video Input S or V yellow video or S Video cable Use the AV3 input to connect an external device such as a VCR or a VCD DVD player with a composite output Audio Input R L white and red audio cables Video Input V yellow video cable Connects to an antenna or CATV cable television line Connects to the included power adapter 24 Hannspree Getting Started Making Connecti
17. JUST MENU CLOSE 2 Press the VOLUME A org button to select the language from the following English Traditional Chinese Note The default language setting is Tradi tional Chinese Hannspree 69 Sleeper The sleep timer turns the TV off automatically after a set time MISCELLANEOUS SLEEPER C OFF al SELECT lt gt ADJUST MENU CLOSE ZU nannspree 1 Press the CHANNEL A or V button to select SLEEPER The current setting is shown in brackets 2 Press the VOLUME A or button to select a sleep timer value from the following OFF 30 60 90 or 120 minutes You can also press SLEEP on the remote control to select OFF 30 60 90 or 120 minutes Press display the setting appears on the TV screen The remaining time is updated every 1 minute on the display Time This setting allows you to set the system time MISCELLANEOUS TIME SELECT lt lt gt ADJUST MENU CLOSE TIME SETTING HOUR SELECT lt gt ADJUST MENU CLOSE 1 Press the CHANNEL Aor V button to select TIME Press the VOLUME A button to change the time Press the CHANNEL Aor V button to select HOUR Press the VOLUME A or button to increase or decrease the hour Press the CHANNEL Aor V button to select MINUTE Press the VOLUME A or button to increase or decrease the minutes Hannspree 71 Taking Care of Your TV S LE Z HANNSpree Turn the power off before you begin cleaning the TV
18. V V MUTE CC 4 SELECT ap ENTER MENU CLOSE R MENU S video Video L Press MENU to enter the OSD The Main Menu appears Main Menu screen Notes e Press the MENU button to open and close the OSD menu at any time e Alternatively select the CLOSE option in the menu to return to the previous menu HANNspree 39 Picture Settings MAIN MENU POWER SOURCE PICTURE A A VOLUME CHANNEL V J 7 SELECT lt gt ENTER MENU CLOSE MENU S video Video Press CHANNEL A or to Press MENU to enter the OSD select PICTURE Main Menu screen Press VOLUME A or to enter the PICTURE Menu e You can control the OSD with either the remote control or the front panel control e PC picture mode and TV picture mode have different menu items PC picture mode includes a Backlight adjustment 40 nannspree Brightness PICTURE BRIGHTNESS UT nnn 50 SELECT lt lt gt ADJUST MENU CLOSE 1 Press the CHANNEL Aor V button to select BRIGHTNESS The slider bar shows the current setting 2 Press the VOLUME A button to increase the brightness A Press the VOLUME button to decrease the brightness Note The new setting is confirmed automat ically when the OSD times out Hannspree di Contrast ee 1 Press the CHANNEL A or VW CONTRAST W
19. ee Brightness on page 41 Adjust the saturation in the OSD menus See Sharpness on page 46 Press the VOLUME UP button on the control panel or remote control Make sure the MTS option is set to MAIN Adjust the balance in the OSD menus See Balance on page 53 Try the Auto Program function in the TV Set tings menu See Auto Scan on page 59 Use the Preset function in the OSD Picture and Audio menu If OSD items are colored light blue it means that these settings are not available For exam ple TV settings are available in TV mode when source is selected to be TV Make sure the video signal cable is connected properly HANNspree ZA Situation Solution e Make sure the source device is functioning properly e Set the volume to a higher level e Make sure the audio cable is connected securely e Turn the mute off No sound but have image e Make sure the video signal cable is connected Screen image turns over properly e Adjust the location of the antenna placing it as far as possible from roads or sources of inter Snow appears on the screen ference e Check the antenna and the video signal line connections e Readjust the sharpness setting e Choose programs with high quality signals e Adjust the direction of the antenna or change the video signal cable Blurred or overlapped images 74 Hannspree Specifications LCD Panel Size Aspect Ratio Panel Best
20. en the OSD times out The default color temperature is STD 48 Hannspree Preset PICTURE PRESET OFF J SELECT lt lt gt ADJUST MENU CLOSE 1 Press the CHANNEL A or V button to select PRESET 2 Press the VOLUME Aor V button ON appears in the brackets All picture settings are returned to the factory set default values Note The preset function erases all of your custom picture settings HANNspree 49 Audio Settings MAIN MENU POWER SOURCE AUDIO A A VOLUME CHANNEL V a SELECT 4 gt ENTER MENU CLOSE MENU S video Video Press CHANNEL A or to Press MENU to enter the OSD select AUDIO Main Menu screen Press VOLUME A or to enter the AUDIO Menu Note You can control the OSD with either the remote control or the front panel control 50 HANNSpree Treble AUDIO TREBLE UT i 108 SELECT lt gt ADJUST MENU CLOSE 1 Press the CHANNEL A or V button to select TREBLE The slider bar shows the current setting 2 Press the VOLUME A button to increase the treble A Press the VOLUME button to decrease the treble Note The new setting is confirmed automati cally when the OSD times out Hannspree 51 Bass SES 1 Press the CHANNEL Aor V Ge we button to select BASS The slider bar shows the current setting 2 Press the VOLUME A button t
21. g is confirmed automati cally when the OSD times out Hannspree 45 Sharpness 1 Press the CHANNEL Aor V button to select SHARPNESS The slider bar shows the current PICTURE SHARPNESS Uiluussssupssuuser 4 setting 2 Press the VOLUME A button to increase the sharpness A Press the VOLUME button to decrease the sharpness 7 SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed automati cally when the OSD times out 46 nannspree Black Level PICTURE BLACK LEVEL Wille 7 SELECT lt gt ADJUST wun 50 MENU CLOSE 1 Press the CHANNEL A or button to select BLACK LEVEL The slider bar shows the current setting 2 Press the VOLUME A button to increase the black level 3 Press the VOLUME button to decrease the black level Note The new setting is confirmed automati cally when the OSD times out HANNspree 47 Color Temperature 1 Press the CHANNEL Aor V button to select COLOR TEMP 2 Press the VOLUME A or button COLORTEMP STD J to change the color temperature PICTURE The current setting is shown in SELECT lt lt gt ADJUST MENU CLOSE brackets The following options are available e STD Color for standard color settings e WARM Color for color set tings with red as the dominant color e COLD Color for color set tings with blue as the dominant color Notes e The new setting is confirmed automatically wh
22. gnal while SAP Second Audio Program enables reception of a separate channel that may be a different language or completely different information such as the news Saturation Chromatic purity indicating the amount of white contained in a color Fully saturated colors are pure colors less saturated colors appear as pastel shades S Video Super video a video cabling standard used to transmit video by keeping brightness Y and color information C on separate channels Most often used with camcorders VCRs and quality receivers and amplifiers to provide sharper pic tures TruSurround 3D audio surround technology that delivers virtual surround sound experience through any two speaker system including internal television speakers and earphone VCD A compact disk format developed in 1993 by Sony and Philips to capture full motion video A standard Video CD can hold 74 minutes of near VHS quality video and CD quality sound 78 Hannspree MEMO MEMO
23. he VOLUME button to move the display to the left Note The new setting is confirmed automati Cally Cec 66 HANNSpree Vertical Position PC V POSITION UT i 15 7 SELECT lt lt gt ADJUST MENU CLOSE 1 Press the CHANNEL Aor V button to select V POSITION The slider bar shows the current setting 2 Press the VOLUME A button to move the display upward 3 Press the VOLUME button to move the display downward Note The new setting is confirmed automati Cally Cc Hannspree 67 Miscellaneous Settings MAIN MENU POWER SOURCE A A VOLUME CHANNEL MISCELLANEOUS Vv 7 SELECT lt gt ENTER MENU CLOSE MENU S video Video Press CHANNEL A or to Press MENU to enter the OSD select MISCELLANEOUS Main Menu screen Press VOLUME A or Y to enter the MISCELLANEOUS Menu Note Operate the OSD with either the remote control or the front panel control 68 HANNSpree Wide Fee 1 Press the CHANNEL A or V WO GE button to select WIDE The current setting is shown in brackets 4 SELECT lt gt ADJUST MENU CLOSE 2 Press the VOLUME A org button to select the screen format from the following 16 9 4 3 Anamorphic Language SEENEN 1 Press the CHANNEL A or V LANGUAGE ENGLISH J button to select LANGUAGE The current setting is shown in brackets 4 SELECT gt AD
24. hnician Ask the ser vice technician to complete a safety inspection before switching on the power after completing any maintenance Regulatory Information FCC Compliance Statement This device complies with part 15 of the FCC Rules Operation is sub ject to the following two conditions 1 This device may not cause harm ful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These lim its are designed to provide reasonable protection against harmful inter ference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be deter mined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connec
25. ing and distribution No part of this documentation may be reproduced in any form by any means without prior written authorization of Hannspree Inc and its licensors if any BBE SRS EALA Statement BBE E e Manufactured under license from BBE Sound Inc e Licensed by BBE Sound Inc under USP4638258 5510752 and 5736897 e BBE and BBE symbol are registered trademarks of BBE Sound Inc e BBE High Definition Sound restores clarity and presence for bet ter speech intelligibility and musical realism i atrademark of SRS Labs Inc TruSurround SRS AR technology is incorporated under license from SRS Labs Inc z EALA is a trademark of New Japan Radio Co Ltd HANNspree 9 Description of Warning Symbols This symbol is used to remind users to pay attention to important descriptions regard ing usage and maintenance repair or additional impor This symbol is used to remind users to pay attention to the danger of electric shocks due to dangerous internal non insulated components tant information related to this product Electric Power Notice Electric power may cause personal injury and mechanical damage if it is misused Although safety has been taken into consideration during the design and production of this product electric shock or fire can result when the product is misused To prevent potential danger follow the instructions below when installing operating and cleaning the product
26. ing the number buttons on the remote control The channel is displayed on the screen Channel down Channel up Hannspree 35 Adjusting the Volume 1 Press the VOL A button to increase the volume 2 Press the VOL button to decrease the volume 3 Press the MUTE button The word MUTE appears on the bottom right MAIN CATV CH 033 corner of the screen and sound is turned off 4 Press the MUTE button again to restore the original volume I J MUTE MENU S video Video B R Mute Volume down Volume up Switching Source Signals Press the SOURCE button repeatedly to select different source TE The selected source TV AV1 AV2 AV3 AV4 and PC appear on the top left corner of the screen in that order Note The TV supports S Video input in addition to normal video and audio signals The TV detects the signal type automatically and gives priority to S video when two signals Source are detected at the same time 36 HANNSpree Using PIP and POP The TV features Picture in Picture PIP and Picture outside Picture POP enabling you to view two sources at the same time Follow these instructions 1 Turn on the TV and select a MAIN TV CH 007 source signal 2 Press the PIP button on the remo
27. located at the rear and front of the unit You can also use the TV as a monitor for your PC by connecting it through the DVI port Convenient control buttons located on the front panel let you change channels adjust the volume and change display settings through an easy to use on screen menu system The TV speakers provide full rich stereo sound and a convenient audio output port lets you connect to an external audio system or earphone HANNspree 17 Features e 23 inch color TFT LCD TV e Safe sturdy construction e Built in dual TV tuner e Audio video support Stereo audio inputs Composite video inputs Component video input S Video inputs 3 5 mm stereo earphone output DVI input e On screen display OSD menu system e Multi channel Television Sound MTS with SAP e Built in 7 5 W 7 5W stereo audio amplifier e PIP POP e Image Enhancement Technology 3 2 pull down DCDi 3D Y C comb filter e Noise Reduction e De interlace e Edge Enhancement 18 Hannspree 7 Checking Package Contents Make sure the following components are included in the box Contact your vendor immediately if anything is missing or damaged TV User s Manual Quick Start Guide Warranty and Service Manual Ye E See Cables Power Cord Power Adapter Hannspree 19 Getting to Know Your TV Front View Controls 8 e e cl 1
28. n of the TV is made of glass be care ful to avoid hitting or scraping it If the screen is broken avoid cutting yourself on the broken glass Do not allow children to use the TV unattended to avoid accidents caused by improper opera tion Be careful not to your fingers at the hinge when rotating the TV panel Installation To avoid damage to power circuits do not place the TV in locations where there is excessive steam or dust Do not place the TV on a bed sofa carpet or in a sealed cabinet to avoid blocking the product s vents Install the outdoor antenna far from power trans mission lines to avoid possible danger Remove the power cord and antenna connector when there is a storm or when the TV is not in use for a long period to avoid electric shock from lightning Hannspree 13 Operation EH Ze Maintenance LU 14 Hannspree This product is designed for power sources as labeled on the casing Avoid using any other power accessories to avoid electric shock or other damage The plug can be inserted into an outlet in only one direction Notify a qualified service techni cian if you cannot plug it in correctly If there is any problem that cannot be resolved according to the instructions given in this man ual notify a qualified service technician immedi ately Do not attempt any methods not covered in this manual Do not attempt to repair the TV by yourself Notify a qualified service tec
29. o increase the bass 3 Press the VOLUME button to decrease the bass SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed automati cally when the OSD times out 52 HaANNspree Balance AUDIO BALANCE dnnnnnnnnssnng l ITOTTOTTOTT gt SELECT lt gt ADJUST MENU CLOSE BBE TruSurround and EALA AUDIO LON J TruSurround 7 SELECT lt lt gt ADJUST MENU CLOSE Press the CHANNEL A or V button to select BALANCE The slider bar shows the current setting Press the VOLUME A button to shift the balance to the right speaker Press the V button to shift the balance to the left speaker Note The new setting is confirmed automati cally when the OSD times out Press the CHANNEL A org button to select BBE TruSurround or EALA Press the VOLUME Aor V button to select a setting for each effect BBE off high low TruSurround on off EALA on off Note Only one sound effect can be selected at a time HANNspree 53 Earphone 1 Press the CHANNEL Aor V button to select EARPHONE The slider bar shows the current AUDIO setting 2 Press the VOLUME A button to increase the earphone volume 3 Press the VOLUME button to decrease the earphone volume EARPHONE n 20 SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed automati cally when the OSD times out 54 nannspree Preset AUDIO PRESET OFF J
30. ons Open the back cover as shown in the following illustration to get access to the input and output ports 1 Rotate the cover in 2 Pull the cover out the direction of the arrow HANNspree 25 Connecting to an Antenna or Cable TV 1 Connect one end of the VHF UHF Antenna or CATV cable to the ANT Jack VHF UHF IN Jack on the back of the TV 2 Connect the other end of the VHF UHF Antenna or CATV cable to the Antenna or CATV socket Antenna HANNSPree oa o o o o PO Antenna CATV socket ANT jack VHF UHF IN jack Antenna CATV coaxial cable Note If you cannot receive channels after connecting to an antenna or cable TV line try scanning for channels See Auto Scan on page 59 26 Hannspree Connecting to AV Devices Connect external devices such as VCD DVD players or VCRs to the TV using the AV1 AV2 AV3 and AV4 ports on the back or front of the TV Connecting to a VCR VCD or DVD Player using component video The illustration presented here shows how to connect your TV to a VCR VCD or DVD player using the AV1 component video port Actual connections may vary according to the make and model of your device Refer to the user s manual included with the AV device for more detailed instructions VCR HANNSOree VCD
31. s or modifications that do not follow the instructions in this manual will void this product s warranty AN Warning To reduce the risk of fire or electric shock do not expose this product to rain or moisture MN Power To avoid danger of fires or electric shock make sure that you use a proper adapter The TV is compatible with the following adapter e LI SHIN INTERNATIONAL ENTERPRISE CORP LSE0226B20150 8 Hannspree Optimal Viewing Distance HANNspree 9 Important Safety Instructions 10 Hannspree Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other appa ratus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A ground ing type plug has two blades and a third ground ing prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electri cian for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at the plug convenience receptacles and the point
32. ss the VOLUME A button to increase the phase 3 Press the VOLUME button to decrease the phase Note The new setting is confirmed automati Cally Hannspree 63 Clock i 1 Press the CHANNEL Aor V CLOCK Wen 50 button to select CLOCK The slider bar shows the current setting 2 Press the VOLUME A button to increase the clock 3 Press the VOLUME button to decrease the clock 7 SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed automati Cally D pannspree Auto Adjustment PC AUTO ADJ OFF J SELECT lt lt gt ADJUST MENU CLOSE DOS Mode PC DOS MODE TEXT J 7 SELECT lt lt gt ADJUST MENU CLOSE Press the CHANNEL A or V button to select AUTO ADJUSTMENT Press the VOLUME A button to enable auto adjustment The display is automatically configured for the attached computer s display properties Press the CHANNEL A or V button to select DOS MODE The current setting is shown in brackets Press the VOLUME Aor V button to toggle the setting between TEXT and GRAPHIC TEXT select this option when using DOS at the command line GRAPHIC select this option when using DOS based graphi cal programs Hannspree 65 Horizontal Position 1 Press the CHANNEL Aor V button to select H POSITION The slider bar shows the PC H POSITION UT i 50 current setting EE 2 Press the VOLUME A button to move the display to the right 3 Press t
33. t 77 To SIOSS e EE 78 HANNSpree 3 Warranty and Service The instructions on this manual are for the model s listed on the front cover Before you start reading check your product number by looking at the rear of your TV Thank you for purchasing our Liquid Crystal Display Television LCD TV With this product you will be able to enjoy superior audio and video while enriching your lifestyle with advanced technology The Hannspree TV is warranted for one year limited service from the date the product is received as shown on the Warranty and Service Manual please refer to the Warranty and Service Manual for the detailed warranty information Hannspree provides complete service information in the included Warranty and Service Manual or directly from the Hannspree cus tomer service center Our service representatives will be very happy to serve you to your satisfaction The Hannspree e mail address service hannspree com 4 Hannspree Preface This manual is designed to assist users in setting up and using the LCD TV Information in this document has been carefully checked for accu racy however no guarantee is given to the correctness of the contents The information in this document is subject to change without notice Copyright Copyright 2004 Hannspree Inc All rights reserved This product and related documentation are pro tected by copyright and are distributed under licenses restricting their use copy
34. te control CH 007 PIP CATV CH056 A picture in picture window appears on the display using the last selected source signal for the PIP Note Refer to PIP Operation Mode on page 76 for information on which sources are compatible with each other in PIP and POP mode 3 Press the SWAP button on the remote control to switch the focus MAIN TV CH 007 from the PIP to the main source The PIP identification line disappears and the PIP window border disappears HANNspree 37 4 Press the POSITION button on the remote control to move the PIP window to one of the four corners of the screen as shown 5 Press the PIP button to switch to POP mode The two signals are displayed POP TV CH 002 side by side 6 Press the PIP button again The eS screen displays the main source signal again 38 HANNSpree Adjusting On Screen Display OSD Settings The On Screen Display OSD menu system provides a quick and simple method to adjust your TV s setting This chapter describes how to change each of the available settings The OSD menu can be accessed through either the front control panel or the remote control Button Descriptions Front Panel Control Menu MENU CH Up A CH Down y VOL Up A VOL Down y The following sections explain how to adjust settings in the OSD menus using the front panel control OSD Setting Menus MAIN MENU SOURCE PICTURE A A VOLUME CHANNEL
35. ted e Consult the dealer or an experienced radio TV technician for help Warning You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment 1 applies only to products purchased in the United States of America Hannspree 15 DOC Compliance Notice This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications This device complies with Canada ICES 003 Class B CE Conformity Statement This device complies with the requirements set out in the Council Direc tive on the approximation of the Laws of the Member States relating to Electromagnetic Compatibility 89 336 EEC and the Amendment Direc tive 92 31 EEC Low Voltage Directive 73 23 EEC and the Amend ment Directive 93 68 EEC 1 applies only to products purchased in Canada 2 applies only to products purchased in the European Union 16 Hannspree Introducing the TV Thank you for purchasing this Liquid Crystal Display TV Your TV is designed to be safe versatile and easy to use Its sturdy design makes it a decorative addition to your living room You can watch standard NTSC broadcast or cable television channels and easily connect a VCR VCD or DVD player to the standard CVBS and S Video input ports
Download Pdf Manuals
Related Search