Hannspree 9.6" Liquid Crystal Display User's Manual
Contents
1. data MSnu 1 Press menu to enter the OSD menus Ole Seles 2 Press menu again and the brightness Brightness slide bar appears mmmm 50 3 Press channel up to increase the 4 brightness 4 Press channel down to decrease the brightness 5 Press menu to confirm the setting and return to the Main menu Note The new setting is confirmed automatically when the OSD times out HANNSpree 33 Contrast Main Menu 3 amp LO amp 3 C a amp Contrast a 50 34 HANNSpree Press menu to enter the OSD menus 2 Press channel up or channel down to select Contrast 3 Press menu The contrast slide bar appears 4 Press channel up to increase the contrast 5 Press channel down to decrease the contrast 6 Press menu to confirm the setting and return to the Main menu Note The new setting is confirmed automatically when the OSD times out Video Setting Press menu to enter the OSD Main Menu menus LOS SSis1s 1 Press channel up or channel down to select Video Setting 2 Press menu to enter the Video Setting2. Reset 1 2 Press channel up or channel down to select Reset Press menu to enter the Reset menu Press channel up or channel down to select Yes or No By default No is already selected highlighted in red Press menu to confirm your choice HANNSpree 55 Taking Care of Your TV amp Remote Control Turn the power off before you begin cleaning the TV For best results use a clean lens cloth to remove dust and fingerprints from the screen Do not wipe the shell of the TV with alcohol methanol gasoline or oil products to avoid damaging the finish Wipe the shell with a dry soft cloth and use neutral cleaning fluids J leather parts with a dry cloth and keep the area EE dry Place the TV far from sources of steam to avoid making the leather wet If your model has leather components wipe the Be careful to disconnect the power plug correctly Hold the plug Do not attempt to disconnect the plug by pulling on the power cord Arrange and store the power cord neatly as shown to the left to avoid knotting or bending which may cause fire due to damage or electric leakage Note Protect the remote control from shock or vibration to avoid damage Do not place the remote control in hot or humid locations 56 HANNSpree Troubleshooting Situation No picture and sound Solution Conn
3. HO 55 11 Taking Care of Your TV amp Remote Control 56 T2 LPOUBISSIOOUNG oe decas Gear ea Resa E hex aud baa Ru sits dat Maa nd NUEE 57 13 Warranty and SerVviGB iesienriiemi cnc raso texte a eR ea qeu RET E gedudRE 59 14 Specifications ssesssssssssssssssssssme 60 TOASIOSSALY LTEM 61 2 Hannspree Regulatory Information FCC Compliance Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Additional Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of
4. ENTER 9 1 Press menu to enter the OSD Position menu The following options are available Horizontal Position 1 2 Press menu Press channel down to move the OSD screen to the left Press channel up to move the OSD screen to the right Press menu to confirm the setting Vertical Position 1 2 3 Press channel up or channel down to select V Position Press menu Press channel down to move the OSD screen downward Press channel up to move the OSD screen upward Press menu to confirm the setting HANNSpree 51 Language Miscellaneous 1 Press channel up or channel down to Soe ie select Language Language 0 2 Press menu to enter the Language Eepane menu The screen displays the available OSD languages English and Espa ol 3 Press channel up or channel down to select a language 4 Press menu to confirm your choice 52 HANNSpree Sleeper The Sleeper turns the TV off automatically after a set period of time 30 60 90 12 Miscellaneous 1 amp amp 5 C9 e Ig Sle
5. E Sharpness 38 HANNSpree 1 Press channel up or channel down to select Sharpness 2 Press menu to enter the Sharpness menu 3 Press channel up to increase the sharpness 4 Press channel down to decrease the sharpness 5 Press menu again to confirm the setting and return to the Video Setting menu Note The new setting is confirmed automatically when the OSD times out Color Temperature Video Setting 1 Press channel up or channel down to EFT ES 89 Iss select Color Color 2 Press menu to enter the Color menu The following three color temperatures are available Standard Color Press channel up or channel down to select Standard then press menu Warm Color Press channel up or channel down to select Warm then press menu Cold Color Press channel up or channel down to select Cold then press menu Note The new setting is confirmed automatically when the OSD times out HANNSpree 39 Audio Setting Press menu to enter the OSD Main menu menus LO ex 99 3 f 13 1 Press channe
6. Features Built in TV tuner e 4 IN 1 A V cable On Screen Display OSD menu system Built in stereo speakers HANNSpree 1 5 Checking Package Contents Make sure the following components are included in the box Please contact Hannspree Customer Service immediately if anything is missing or damaged e TV User s manual Quick start guide Warranty and service manual Power cord Power adapter e 4 IN 1 A V cable Remote control and battery batteries RCA jack x 3 Stop Card 1 6 HANNSpree Getting Started Control Panel Description Icon Function Power D POWER Turns the TV on and off Power LED Indicates power status Selects the input source to be Source SOURCE displayed TV CATV AV or S Video Turns the On Screen Display OSD MENU Menu menu on and off channel up Changes channels Press channel up Select Pi A to increase the channel number channel channel down Press channel down to decrease the 41 1 V channel number Press volume up to increase the audio volume Press volume down to decrease the audio volume Adjust volume up volume volume down HANNSpree 1 7 Input and Output Jacks Description Connector Function Use the included 4 IN 1 A V cable to connect external devices such as a VCR VCD DVD player CVBS RCA 4 IN 1 cables or a game device AV AV IN Audio Input AV connector audio white and red cables Video Input AV
7. Donotuse this apparatus near water 6 Clean only with dry cloth 7 Donotblock any ventilation openings Install in accordance with manufacturer s instructions 8 Do not install near any heat sources such as BS radiators heat registers stoves or other EEE apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 8 HANNSpree 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord
8. To ensure the safe and correct installation and operations of the TV it is important that the safety and operation instructions in this manual are followed This instruction manual is designed to assist you in setting up and using the TV The information in this manual has been carefully checked for accuracy however no guarantee is given to the correctness of the contents The information in this manual is subject to change without notice To the extent allowed by applicable law Hannspree California Inc Hannspree shall not be liable for direct indirect special exemplary incidental or consequential damages arising from any defect or omission in this manual even if advised of the possibility of such damages in advance Hannspree 13 Copyright Copyright 2004 Hannspree California Inc All rights reserved This manual is protected by copyright and distributed under licenses restricting its use copying and distribution No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree The TV described in this manual may include copyrighted software of Hannspree or other third parties Hannspree or other third parties preserves the exclusive rights for copyrighted software such as the right to distribute or reproduce the copyrighted software Accordingly and to the extent allowed by applicable law any copyrighted software contained in the product described herein sh
9. the antenna socket or CATV cable Antenna ANT jack VHF UHF IN jack Antenna CATV socket Antenna CATV coaxial cable Note If you cannot receive channels after connecting to an antenna or cable TV line try scanning for channels See Auto Program on page 47 24 HANNSpree Connecting to AV Devices Connect external devices such as a VCR VCD DVD player or video game console to the TV using the supplied 4 IN 1 A V cable Connecting to a VCR VCD DVD Player The illustration presented here shows how to connect the TV to a VCR VCD or DVD player Actual connections may vary according to the make and model of the device Refer to the user s manual included with the device for more detailed instructions VCR DVD VCD 4 IN 1 209 900 44N 1 AN jack S Video connector AV connectors Note The cables are color coded black red white yellow Connect each color coded cable to the appropriate connector on your device When connecting the S Video connector and AV connector at the same time the priority is given to the S Video connector HANNSpree 25 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digital camera Actual connections may vary according to the make and model of the device Refer to the user s manual included with the camcorder or camera for more detailed instruction
10. automatically when the OSD times out HANNSpree 45 TV Setting Stereo SAP Mono TV Setting al E amp mra Stereo TV Setting n SAP TV Setting g J se se S D TE Mono 46 HANNSpree Press channel up or channel down to select MTS Press menu to enter the MTS menu Stereo Press channel down to select Stereo Stereo is highlighted in red Press menu again to confirm the selection SAP Press channel up or channel down to select SAP SAP is highlighted in red Press menu again to confirm the selection This option may not be available in your local area Mono Press channel up to select Mono Mono is highlighted in red Press menu to confirm Mono which outputs sound through a single channel Note The new setting is confirmed automatically when the OSD times out Auto Program TV Setting 1 Press channel up or channel down to ELS sete
11. menu ENTERS HANNspree 35 Hue Video Setting A 36 HANNSpree Press menu to enter the Hue menu 2 Press channel up to increase the hue towards the red spectrum The image becomes more red 3 Press channel down to decrease the hue towards the green spectrum The image becomes more green 4 Press menu to confirm the setting and return to the Video Setting menu Note The new setting is confirmed automatically when the OSD times out Saturation Video Setting Eu E 9 Saturation 50 1 Press channel up or channel down to select Saturation 2 Press menu to enter the Saturation menu 3 Press channel up to increase the saturation The screen image becomes more vibrant 4 Press channel down to decrease the saturation The screen image becomes less vibrant 5 Press menu to confirm the setting and return to the Video Setting menu Note The new setting is confirmed automatically when the OSD times out HANNspree 37 Sharpness Video Setting OLLI
12. or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped CAUTION A These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so HANNSpree 9 Personal Safety To avoid overloading the power supply never plug too many electrical devices into an outlet power strip or extension cable Dangerous high voltage electric power components are located inside the TV To avoid electric shock do not disassemble the TV in any way Do not place or drop metals small objects or flammable materials into the vent of the TV If the TV is dropped falls down or is otherwise damaged unplug the power cord immediately and contact an authorized service technician If any fluid is sprayed or dropped into the TV contact an authorized service technician The screen of the TV is made of glass Avoid hitting or scraping it If the screen is broken do not touch the broken glass 1 0 HANNSpree Do not allow children to use the TV unattended Installation Do not place the TV in locations where there is excessive steam or dust Avoid blocking the TV s vents do not place the TV on a bed
13. sofa carpet or in a sealed cabinet Install the outdoor antenna not included away from power transmission lines to avoid possible danger Unplug the power cord and antenna connector when there is a storm or when the TV is not in use for long periods to avoid electric shock from lightning HANNSpree 1 1 Operation This TV is designed for home power sources as labeled on the casing Avoid using any other power accessories to avoid electric shock or other damage E The plug can be inserted into an outlet in only one direction as shown to the left Do not alter the plug Contact an authorized service technician if you cannot plug it in correctly If there is any problem that cannot be resolved according to the instructions given in this manual contact an authorized service technician immediately Do not attempt any methods not covered in this manual Maintenance Lo Do not attempt to repair the TV by yourself Contact an authorized service technician Ask the service technician to complete a safety inspection before switching the power on after completing any maintenance 1 2 HANNSpree Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television LCD TV Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology Please carefully read this manual in its entirety before setting up using or operating your TV
14. the following measures Reorient or relocate the receiving antenna ncrease the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Warning You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment 1 applies only to products purchased in the United States of America HANNspree 3 DOC Compliance Notice This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications This device complies with Canada ICES 003 Class B CE Conformity Statement This device complies with the requirements set out in the Council Directive on the approximation of the Laws of the Member States relating to Electromagnetic Compatibility 89 336 EEC and the Amendment Directive 92 31 EEC Low Voltage Directive 73 23 EEC and the Amendment Directive 93 68 EEC 1 applies only to products purchased in Canada 2 applies only to products purchased in the European Union 4 HANNSpree Description of Warning Symbols AN Before You Proceed 1 Read all Safety Notices in Section 2 of this manual and instructions in the User s Manual careful
15. E EAER 30 Using the Remote Control eeseeeseeesssss 30 Turning the TV On and Off aeee 30 Selecting Channels eese 30 Switching Source Signals esses 30 Adjusting the Volume uisus usc cpaateest ticxol ie Heinesen undas 30 10 Adjusting On Screen Display OSD Settings 31 OSD Setting MGA viciscicenscasnscnranannmiergemnaiabienenbaiimadnic 32 iji T RA 33 oan PCT ere ree 34 Video Setting iacs sess bEuseE ae RR ReERPRERMMeRUA ERR NER ERR RIRRKRE 35 pg rom 36 rum E 37 Sharpness ssssssssssssssssse mene 38 HANNSpree 1 Table of Contents Color Temperature ccececececee ee eeeeeeeeeeeeeees 39 Audio Setting ose windienceisisecaicc ape dnhas Atzwstehd piu maet tatus iniE 40 reble E 41 ICD IM MY 42 rire a EaR 43 EA RU UT 44 TVIGAT V gieecscetesxkvest Rent naa aE N KAEN EEE ERAAI AKA 45 MIS erena eee 46 AUG PO Ora ssccnccscacsneticetenced vending as aa e EE Eaa 47 Manual PTO GTA acs nee tesserae bx yia t bud badttalt 48 Channel Add Erase uio e ext ik nk eek R ae ha 49 Miscellaneous SBITITIB assess iuiqeuk ds eaux nb E E Dad 50 OSD POSION iudica sexes RexdS aitaita 51 Language M T 52 Sleeper oe p x AXE RRR RERRRARTE EK XX VATER ELO RT EG 53 OSD DISpl Y c T aan 54 hc I
16. HANNSpree HANNspree HANNSPREE CALIFORNIA INC T m APEE 9 6 Liquid Crystal Display S A uu d 12 1 Television FAX 1 510 360 3001 www hannspree com User s Manual MAK 000003 Table of Contents 1 Regulatory Information vcciccincececcecccciactimigiateeanciansencdiane bins 3 2 Description of Warning Symbols cceeeeeeeee eee ee eees 5 3 Safety NOU OOS c 6 4 Preface sarciicsentstedeanstaudiactametearesaudianieantrenixemediacksandsenke 13 Os Introd cing the Mp 15 crc green er er eee Peer EE eT erry er qm 15 6 Checking Package Contents 2 ccseeeeeeeeeeeeeeeees 16 Te Getting Startg RERUM 17 C ntrol Panel 2icusciskconiro oko Dx MrRtu PEN EUM 17 Input and Output Jacks ssssesssssssssssee 18 Remote Control scecitcccecoitesentescenesaaehatacouasoeseteuted atten 19 Inserting the Remote Control Battery Batteries 21 8 Making Connections isicctscsiacstscnicousiucxcacelioxeane UU eX MUR MEME KS 24 Connecting to an Antenna or Cable TV 24 Connecting to AV Devices seseeeeeenneeeeeee 25 Connecting to a VCR VCD DVD Player 25 Connecting to a Video Camera 26 Connecting to a Video Game Console 27 Connecting External Speakers or Headphones 28 Connecting the Power Adapter sesessssss 29 9 Using th TW steve eakbbaokeeE ek RR a
17. all not be distributed modified reverse engineered or reproduced in any manner without the prior written authorization of Hannspree or of other third parties The Hannspree logos presented herein are trademarks of Hannspree All other product names trademarks or logos mentioned herein are used for identification purpose only and may be the trademarks or registered trademarks of their respective owners The purchase of the product described herein shall not be deemed to grant either directly or by implication estoppel or otherwise any license under the copyrights patents patent applications or trademarks of Hannspree except for the normal non exclusive use that arises by operation of law in the sale of a product 1 4 HANNSpree Introducing the TV Thank you for purchasing this LCD TV Your LCD TV is designed to be safe versatile and easy to use The design makes it a fun addition to any room You can watch broadcast or cable television channels and easily connect a VCR VCD DVD player or a game device to the standard RCA and S Video input jacks that are included in the 4 IN 1 A V cable Convenient control buttons located on the TV and a handy remote control let you change channels adjust the volume and change display settings through an easy to use on screen display menu system The built in stereo speakers provide full rich sound and a convenient audio output port lets you connect to an external audio system or headphones
18. ance Lon r R menu 50 3 Press channel up to shift the balance ENTER to the right speaker 4 Press channel down to shift the balance to the left speaker 5 Press menu to confirm the setting and return to the Audio Setting menu Note The new setting is confirmed automatically when the OSD times out HANNSpree 43 TV Setting Press menu to enter the OSD menus Main Menu xe LO ES 9 we 1 Press channel up or channel down to select TV Setting 2 Press menu to enter the TV Setting menu ENTERO 44 HANNSpree TV CATV TV Setting OR fivicary TV CATV TV Setting CATV TV Setting 1 Press menu to enter the TV CATV menu The following choices are available Receiving Cable TV Press channel up to select CATV then press menu Receiving Broadcast TV Press channel down to select TV default then press menu Note The new setting is confirmed
19. as a 3 pin grounded plug The third pin connects to ground do not remove it or alter it in anyway If the power cord or plug is damaged or worn unplug it immediately and contact an authorized service technician for maintenance To avoid fire or electric shocks do not overload electric power outlets 6 HANNSpree N Installation Safety Notes Antenna We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system You may however use an antenna indoors if it is placed in a location free from interference Location Avoid prolonged exposure to sunlight or other strong sources of heat Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat N WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus AN Power To avoid danger of fires or electric shock only use those adapters listed below which are compatible with this TV e EDAC POWER ELECTRONICS CO LTD EA1050E 120 LI SHIN INTERNATIONAL ENTERPRISE CORP 0217B1240 HANNSpree 7 IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5
20. attention to the polarity markings inside the battery compartment B 3 Replace the battery compartment cover C Note Your remote control may have either AAA type batteries or CR2032 lithium battery batteries 22 HANNSpree CAUTION A If the remote control is not used for a long period remove the batteries and store them separately Handle damaged or leaking batteries carefully and wash hands after such handling If your remote control has two batteries do not mix new and old batteries because the life of the new batteries will be shortened Chemical fluids may leak from the old batteries Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the equipment manufacturer Discard used batteries according to manufacturer s instructions e Refer to your local recycling or waste disposal rules and contact a local waste disposal vendor to dispose of used batteries The remote control may have a magnet in it so do not place magnetic sensitive items such as watches credit cards or flash media close to the cover Donotuse force when pulling the remote control cover open you may damage the hinge HANNSpree 23 Making Connections Connecting to an Antenna or Cable TV 1 Connect one end of the VHF UHF Antenna or CATV cable to ANT Jack VHF UHF IN Jack on the back of the TV 2 Connect the other end of the VHF UHF Antenna or CATV cable to
21. connector video yellow or S Video cable O 399 990 Connects to an antenna or CATV cable television line ANT Connects to the included DC IN DC 12V power adapter Connects to headphones or Headphone external speakers Speakers jack GJ cS 1 8 HANNSpree Remote Control Description Menu Icon ENTER MENU M Function Press this button to activate the OSD menu system and to adjust various settings and personal preferences Arrow 14I V4 PressA VW 4 and P to scroll through the on screen display menus Favorite channels can be selected using the lt and P buttons on the remote control Number ono aN Use to select a channel directly Press 0 9 to enter the channel number press 1 and 0 for channel 10 Recall Last RECALL LAST Press this button to return to the last channel selected MTS MTS Press this button to enable the bilingual function when the program has stereo SAP MONO capabilities This option may not be available in your local area Power 0 Turns the TV power on or off Adjust volume VOL VOL gt VOL VOL lt VVOL VOLA VOL VOL VOL VOL Press volume up to increase the audio volume Press volume down to decrease the audio volume HANNSpree 1 9 Description Icon Function Press this button to eliminate sound Press mute again or press the MUTE Mute volume adjust butt
22. ect the power cord properly Check if the power LED is on or not Press power on the control panel or remote control Press source to cycle through connected video sources Press channel up or channel down to switch to other TV stations Check the TV CATV OSD settings See TV CATV on page 45 Make sure all cables are connected properly No picture or poor picture sound is OK Check the antenna and cable connections Adjust the brightness in the OSD menus See Brightness on page 33 Picture is not in color Adjust the saturation in the OSD menus See Saturation on page 37 Make sure all the cables are connected properly Picture is OK no sound Make sure the source device is functioning properly Make sure the audio cable is connected Securely Turn the mute off Press volume up on the control panel or remote control Make sure the MTS option is set to Stereo SAP or Mono See MTS on page 46 One of the speakers has no sound Adjust the balance in the OSD menus See Balance on page 43 Make sure the audio cable is connected securely Cannot receive some TV channels using cable TV Try the Auto Program function in the OSD TV Setting menu See Auto Program on page 47 Want to reset TV settings Use the Reset function in the OSD menu See Reset on page 55 HANNSpree 57 Situation Cannot operate menus Solution If OSD items are color
23. ed in light blue the system is in a state such that those settings are not available Screen image turns over Make sure the video signal cable is connected properly Snow appears on the screen Adjust the location of the antenna placing it far from roads or sources of interference Check the antenna and the video signal line connections Blurred or overlapped images Readjust the sharpness setting Choose programs with high quality signals Adjust the direction of the antenna or change the video signal cable Remote control doesn t work 58 HANNSpree Make sure the battery is inserted correctly Replace the battery with a new one Make sure the TV power cord is plugged in Make sure the path between the remote control and the sensor is clear Try operating the remote control at a closer distance to the TV Refer to Using the Remote Control on page 30 B Warranty and Service For complete warranty service information please refer to the Warranty and Service Manual enclosed with your TV HANNSpree 59 Specifications LCD Panel Size 9 6 12 1 inch LCD TV 9 6 12 1 inch TFT Aspect Ratio 4 3 Display Resolution 800 horizontal x 600 vertical TV System NTSC Video System S Video Input and Composite Video Input through the 4 IN 1 A V cable Audio System Input RCA Jack L R Audio Input with the 4 IN 1 A V cable Output 3 5mm headphone jack
24. een Display A control panel on the television screen that allows you to select viewing options Saturation Chromatic purity indicating the amount of white contained in a color Fully saturated colors are pure colors less saturated colors appear as pastel shades Stereo is the default audio signal belonging to a particular channel S Video Separate video a video cabling standard used to transmit video by keeping brightness Y and color information C on HANNSpree 61 separate channels Most often used with camcorders VCRs and quality receivers and amplifiers to provide sharper pictures 62 HANNSpree
25. ep 2 OFF 3 L Miscellaneous 4 amp amp lLe E Sleep 5 Press channel up or channel down to select Sleep Press menu to enter the Sleep menu The screen displays the available sleep timer setting OFF 30 minutes 60 minutes 90 minutes 120 minutes Press channel up or channel down to select a setting Press menu to confirm your choice HANNSpree 53 OSD Display When set to Off the OSD display source data on top left corner of the TV screen turns off after approximately 5 seconds When set to On the OSD does not turn off automatically Miscellaneous 1 Press channel up or channel down to merio select OSD Display OSD Display 2 Press menu to enter the OSD Display menu 3 Press channel up or channel down to select On or Off 4 Press menu to confirm your choice On 54 HANNSpree Reset The Reset function returns all of your TV s user settings to their factory defaults Warning The reset function will erase all of your custom settings and will reset all display settings such as contrast brightness etc to the factory default values The reset function cannot be reversed once it begins Miscellaneous ax Ole amp
26. f the following options Add Channel 1 Press channel up to select Add 2 Press menu to add the selected channel Erase Channel 1 Press channel down to select Erase 2 Press menu to delete the selected channel When you return to the normal TV screen and use channel up and channel down to browse channels an erased channel for example Channel 3 is skipped automatically Note You can still access the erased channel by entering the channel number using the number keys on the remote control HANNSpree 49 Miscellaneous Setting Press menu to enter the OSD menus 1 Press channel up or channel 5 ES E ms down to select Miscellaneous Setting 2 Press menu to enter the Miscellaneous Setting menu ENTERO Main Menu 50 HANNSpree OSD Position Miscellaneous KOl e le OSD Position 2 OSD Position eels L H Position RE EE 48 ENTER 9 OSD Position L c E b r IV Positio n
27. l up or channel down to select Audio Setting 2 Press menu to enter the Audio Setting menu ENTER 40 HANNSpree Treble M Audio Setting 1 Press menu to enter the Treble menu ANKH 2 Press channel up to increase the treble 48 3 Press channel down to decrease the treble ENTER 4 Press menu to confirm the setting and return to the Audio Setting menu Note The new setting is confirmed automatically when the OSD times out HANNSpree 41 Bass Audio Setting GaSb Bass Tn 48 ENTER 9 42 HANNSpree 1 Press channel up or channel down to select Bass Press menu to enter the Bass menu 3 Press channel up to increase the bass N 4 Press channel down to decrease the bass 5 Press menu to confirm the setting and return to the Audio Setting menu Note The new setting is confirmed automatically when the OSD times out Balance Setting 1 Press channel up or channel down to AING select Balance Balance 2 Press menu to enter the Bal
28. ly before either plugging in or turning the TV on Keep this User s Manual in a safe place for future reference Keep the box and packaging in case the TV needs to be shipped in the future Follow the TV and warning label instructions Any uses operations changes alterations or modifications of the TV that do not follow the instructions in this manual will void this TV s warranty CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol is used to alert This symbol is used to alert users to pay attention to users to the risk of electric important descriptions shocks due to dangerous and regarding usage maintenance uninsulated components repair and additional important information related to this TV HANNspree 5 Safety Notices Electric Power Notice Electric power may cause personal injury and mechanical damage if misused Although safety has been taken into consideration during the design and production of this TV electric shock or fire can result if the TV is misused To prevent potential danger read and follow the instructions and warnings contained in this manual when setting up operating or cleaning the TV In addition please read all Safety Notices contained in this manual carefully before using the TV AN Power Supply Safety Notes 1 To avoid electric shocks do not use an extended power cord or an outlet that does not match this TV s plug or leaves the plug exposed This TV h
29. nd when headphones are plugged in e Use external speakers with built in amplifiers only 28 HANNSpree Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated 2 Plug the power adapter connector into the DC IN input jack on the rear panel of the TV 3 Insert the three pronged plug at the other end of the power cord into a power outlet DC IN 9 DC IN Power adapter plug Three pronged Power outlet Power cord HANNSpree 29 Using the TV Using the Remote Control For best results use the remote control within a distance of 16 feet 5 meters from the front of the TV Do not exceed an angle of 30 degrees when pointing at the TV Notes The operational distance may be shortened when the signal sensor is directly exposed to strong light Aim the transmitter on the remote control at the signal sensor and ensure that there are no obstacles between them Turning the TV On and Off 1 Press power l on the remote control or control panel to turn on the TV 2 Press power b again the TV is in off mode Selecting Channels Press channel up or channel down on the control panel to select the channel or enter the specific channel number by pressing the number buttons on the remote control Switching Source Signals Press source to select the incoming source signal The current source setting TV CATV AV or S Video appears on the upper left corner of the sc
30. ns select Auto Program 2 Press menu to enter the Auto POS B Program menu 3 Press channel up or channel down to select Yes or No 4 Press menu Channel indicator values range from 2 to 69 antenna connection or from 1 to 125 CATV cable connection HANNSpree 47 Manual Program This function allows you to search preset channels or to erase previously preset channels TV Setting BisJ jssyss E Manual Program 48 HANNSpree 1 Press channel up or channel down to select Manual Program 2 Press menu to enter the Manual Program menu 3 Press channel up or channel down to find the channel you want to add 4 When you have found the channel press menu When you have found the channel see the next section Channel Add Erase to add or erase the channel Channel Add Erase After you found a channel using Manual Program follow the following instruction to add or erase the channel ENSIS C 1 Press channel up or channel down to 7 e E select CH Add Erase CH Add Erase 2 Press menu to enter the CH Erase l d Add Erase menu Select one o
31. ons to restore sound Changes channels Press channel YCHCH4 up to increase the channel number Select channel CH CH Press channel down to decrease the CH CH channel number In AV mode press either button to return to TV mode Press this button to cycle the video Source SOURCE input sources The source is displayed on the screen Press this button to automatically Auto selected AUTO adjust the screen parameters in PC models only mode Only available with 15 inch TVs Display selected DISPLAY models only Press this button to show messages on the screen such as the channel number Press this button again to close the displayed message Reset selected RESET models only 20 HANNSpree Press this button to reset the TV Inserting the Remote Control Battery Batteries Lithium battery batteries 1 Open the battery compartment cover at the back of the remote control A 2 Slide the battery batteries with the positive side facing up underneath the shorter set of metal contacts B 3 Press the battery batteries firmly into place in the battery compartment C 4 Replace the battery compartment cover D Note Your remote control may have either AAA type batteries or CR2032 lithium battery batteries HANNspree 21 AAA battery batteries 1 Open the battery compartment cover at the back of the remote control A 2 Insert the battery batteries paying
32. reen Adjusting the Volume Press volume up to increase the volume Press volume down to decrease the volume The volume level is displayed on the screen 30 HANNSpree Adjusting On Screen Display OSD Settings The On Screen Display OSD menu system provides a quick and simple method to adjust your TV s settings This chapter describes how to change each of the available settings The OSD can be used with either the remote control or the control panel Function Control Panel Icon Button Remote Control Icon Menu Menu Menu MENU ENTER M o CH A P Rightarrow gt gt Channel ddwn CH V 4 Leftarrow lt lt Enter Menu Enter MENU ENTER M Note The following sections explain how to adjust settings in the OSD menus using the control panel HANNspree 31 OSD Setting Menu Main Menu 1 FAAEE Ss Press menu to enter the OSD Brightness menus The Main menu appears MM 50 ENTERS Note To exit the OSD menus press channel up or channel down to select Exit L5 Then press menu to exit the OSD menus Also after you finish setting OSD parameters follow these instructions to exit the OSD menus 32 HANNSpree Brightness
33. s 4 IN 1 4 IN 1 A V jack S Video connector AV connectors Note The cables are color coded black red white yellow Connect each color coded cable to the appropriate connector on your device 26 HANNSpree Connecting to a Video Game Console The instructions presented here are a general guide to connecting the TV to a game console using the RCA Jacks some game devices may require a unique adapter that is not provided Actual connections may vary according to the make and model of the game device Refer to the user s manual included with the game console for more detailed instructions 4 IN 1 000 4 IN 1 A V jack S Video connector e Connect the 4 IN 1 A V cable connectors to the corresponding connectors on your game device adapter If the 4 IN 1 A V cable does not fit the game device then insert RCA jack between the 4 IN 1 A V cable and game device HANNSpree 27 Connecting External Speakers or Headphones External speakers or headphones may be used to listen to the TV rather than using the built in speakers Connect external speakers to the speaker line out port or headphones to the headphone port as illustrated Headphones HEADPHONE Headphone Speakers jack an lt Z E S I NI Speakers SIMIS Lj S A M Z Notes e External speakers or headphones are not included with the TV The internal TV speakers will not output sou
34. x 1 Built in Speakers 2W 2W 3W 3W Power Supply 100 240V 50 60 Hz 12V DC Power Consumption 60 W Maximum Optional Accessories 60 HANNSpree External Speakers Glossary Aspect Ratio The ratio of width to height of a film image or display screen Broadcast TV Broadcasting video signals using high frequency electromagnetic waves to distribute television channels to viewers standard TV broadcast CATV Community Antenna Television the original name for cable TV A television distribution system that uses coaxial cable instead of the traditional radio broadcasting over the air method to deliver television FM radio and other services to consumers Color Temperature Adjusting the color temperature enables you to set the intensity of white light Color temperature is measured in Kelvin K Higher color temperatures result in a blue tint Lower temperatures result in a red tint Hue Colors in a color system are measured by hue saturation and luminance Hue indicates the predominant color LCD Liquid Crystal Display A display technology that uses rod shaped molecules liquid crystals that flow like liquid and bend light MTS Multi channel Television Sound Enables reception of audio other than the primary stereo audio signal SAP Second Audio Program enables reception of a separate channel that may be a different language or completely different information such as the news OSD On Scr
Download Pdf Manuals
Related Search