Hanns.G Hi221 User's Manual
Contents
1. Screen Base Cables and User manual gt DVI D Cable dual input User s manual Warranty card mode optional 8 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual INSTALLATION INSTRUCTIONS Install Remove Figure 1 Installing and Removing the Base INSTALLATION _ Align the monitor with the opening the base 2 Note that the longer section of the base points forward 3 Snap the monitor into its base A clear click sound will affirm that the base is connected correctly 4 Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base REMOVAL 1 Flip over the monitor so that it is upside down 2 Press the button on the arm that holds the monitor in place 3 Gently pull the base from the monitor untill they are unattached POWER POWER SOURCE 1 Make sure that the power cord is the correct type required in your area 2 This LCD monitor has an Internal universal power supply that allows operation in either 100 120V AC or 220 240V AC voltage area No user adjustment is required 3 Connect the AC power cord one end to your LCD monitor s AC input socket the other end to wall outlet 9 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual MAKING CONNECTIONS CONNECT2. Energy saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields e Noise emissions Ecology e The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 e Restrictions on e chlorinated and brominated flame retardants and polymers e heavy metals such as cadmium mercury and lead The requirements included in this label have been developed by TCO Development in cooperation with scientists experts users as well as manufacturers all over the world Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user friendly direction Our labelling system started with displays in 1992 and is now requested by users IT manufacturers all over the world For more information please visit www tcodevelopment com 3 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual Recycling Information We Hanns G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end of life These devices contain recyclable materials which can be re decomposed and re integrated into brand new marvels On the contrary other material can be classified to hazardous and poisoned sub
3. and click Apply 18 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual ERROR MESSAGE amp POSSIBLE SOLUTIONS CABLE NOT CONNECTED 1 Check that the signal cable is properly connected If the connector is loose tighten the connector s screws 2 Check the signal cable s connection pins for damage INPUT NOT SUPPORT Your computer has been set to unsuitable display mode set the computer to display mode given in the following table FACTORY PRESET TIMING TABLE Analog Digital mode HORIZONTAL VERTICAL iad FREQUENCY KHz FREQUENCY Hz 1 640x480 60Hz 31 469 59 94 2 640x480 67Hz 35 66 667 3 640x480 72Hz 37 861 72 809 4 640x480 75Hz 37 5 75 5 720x400 70Hz 31 469 70 087 6 800x600 56Hz 35 156 56 25 800x600 60Hz 37 879 60 317 8 800x600 72Hz 48 077 72 188 9 800x600 75Hz 46 875 75 10 832x624 74 6Hz 49 725 74 5 11 1024x768 60Hz 48 363 60 004 12 1024x768 70Hz 56 476 70 069 13 1024x768 75Hz 60 023 75 029 14 1152x864 75Hz 67 5 75 15 1152x870 75Hz 68 681 75 062 16 1280x960 60Hz 60 60 17 1280x1024 60Hz 63 981 60 02 18 1280x1024 75Hz 79 976 75 025 19 1400x1050 60Hz 64 744 59 948 20 1400x1050 75Hz 65 317 59 978 21 1600x1200 60Hz 75 00 60 00 122 1600x1200 75Hz 93 750 75 00 23 1680x1050 60Hz 65 290 59 954 124 1680x1050 75Hz 82 306 74 892 DVI input source Does not support modes 2
4. if the Video Card is Plug amp Play compatible Check if any plug pins on the D Sub or DVI D connector are bent The display is too dark or too bright Adjust the Contrast and Brightness Controls Picture bounces or a wave pattern is present in the picture electrical devices that may cause electrical interference The power LED is ON orange but there s no video or no picture Computer Power Switch should be the ON position Computer Video Card should be snugly seated in its slot sure monitor s video cable is properly connected to the computer Inspect monitor s video cable and make sure of the pins are bent Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED The LED should either turn ON or OFF after hitting the CAPS LOCK key Missing one of the primary colors RED GREEN or BLUE Inspect the monitor s video cable make sure that none of the pins are bent Screen image is not centered or sized properly Adjust pixel frequency CLOCK and PHASE or press hot key AUTO Picture has color defects white does not look white Adjust RGB color or select color temperature The screen resolution needs to be adjusted Use win 2000 ME XP Right click anywhere on desktop and select Properties gt Settings gt Screen Resolution Use the silder to adjust the reslution
5. 2 24 19 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 55 88 22 0 Pixel pitch 0 282mm H x 0 282mm V Size Ver 296 1mm lt 1W D Sub DVI D Dual Input Model Power Soure 0 40 Operating Temp 5 to 40 C Storage Temp 20 to 60 C Operating Humidity 20 to 80 Dimensions 510 W x423 H x202 D mm 20 iW 16 65 7 95 0 6 7 kg 4 9 kg 14 8 Ib 10 8 Ib above specification is subject to actual product specification and is subject to change without prior notice Input Connector Environmental Considerations NOTES The Maximum Resolution will depends on the display card supporting Related issue can refer to www hannsg com FAQ section 20 PDF created with pdfFactory Pro trial version www pdffactory com
6. 22 inch Wide Screen TFT LCD Monitor Hi221 USER S MANUAL PDF created with pdfFactory Pro trial version www pdffactory com User s Manual Before operating the monitor please read this manual thoroughly This manual should be retained for future reference FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 5 or relocate the receiving antenna 5 Increase the separation between the equipment and receiver B Connect the equipment into an outlet on a circuit different from that to which the receiver is connected B Consult the dealer or an experienced radio TV technician for help The device complies with Parts 15 of the FCC Rule Operati
7. ING TO A PC Turn off your computer before performing the procedure below 1 2 3 Connect one end of the D Sub cable to the back of the monitor connect the other end to the computer s D Sub port Connect one end of the DVI D cable Dual input mode optional to the back of the monitor and connect the other end to the computer s DVI D port Connect the audio cable between the monitor s audio input and the PC s audio output green port Plug one end of the AC power cord to the LCD monitor s AC input socket and the other end to Wall outlet Turn on your monitor and computer Figure 2 Connecting to a PC VGA Input DVI D Input optional Audio Input Power AC Input 10 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor then adjust the monitor s angle to your own preference e Hold the stand so you do not topple the monitor when you change the monitor s angle e You are able to adjust the monitor s angle from 5 to 20 Figure 3 monitor s angle NOTES Do not touch the LCD screen when you change the angle It may cause damage or break the LCD screen Be careful not to place fingers or hands near the hinges when tilting the monitor otherwise pinching can result 11 PDF created with pdfFactory Pro tr
8. User s Manual Select the Language option to change the language of the OSD Language Enter the option and select a language Reference only the OSD Language is depended on selected model Exit Exit the OSD menu function Other Settin Other Setting EES ovce On Off FUNCTION DESCRIPTION Select the DDC CI option to switch the function On or Off dual input DDC CI mode optional Select the Volume option to set the volume level from 0 to 100 Enter Volume the option and adjust the level F l Sharpness Select the Sharpness option to adjust the sharpness of the display Set the value from 0 to 6 Select the DOS mode option to set the monitor for use with PC Enter DOS mode the option and select 720 400 or 640 400 Factory Reset Select the Factory Reset option to reset to the monitor s default setting This will erase the current settings Enter the option and select On or Off Exit Exit the OSD menu function 16 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual PLUG AND PLAY Plug amp Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD It allows the monitor to inform the host system of its identity and depending on the level of DDC used communicate additional information about its display capabilities The DDC2B is a bidirectional data c
9. a bookcase or cabinet unless proper ventilation is provided e The monitor should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company e Unplug the unit during a lighting storm or when it will not be used for long period of time This will protect the monitor from damage due to power surges e Do not overload power strips and extension cords Overloading can result in fire or electric shock e Never push any object into the slot on the monitor cabinet It could short circuit parts causing a fire or electric shock Never spill liquids on the monitor Do not attempt to service the monitor by yourself opening or removing covers can expose you to dangerous voltages and other hazards Please refer all servicing to qualified service personnel To ensure satisfactory operation use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 240V AC Min 5A e The wall socket shall be installed near the equipment and shall be easily accessible 6 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem Due to the nature of the fluorescent light the screen may flicker during initial use Turn off the Power Switch and then turn i
10. djustment function is used to optimized the H Position V Position Clock and Phase NOTES Do not install the monitor in a location near heat sources such as radiators or air dusts or in a place subject to direct sunlight or excessive dust or mechanical vibration or shock Save the original shipping box and packing materials as they will come in handy if you ever have to ship your monitor For maximum protection repackage your monitor as it was originally packed at the factory To keep the monitor looking new periodically clean it with a soft cloth Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution Never use strong solvents such as thinner benzene or abrasive cleaners since these will damage the cabinet As a safety precaution always unplug the monitor before cleaning it Function Key Lock Press the lt Volume gt Volume andthe Menu buttons simultaneously to enable the Function Key Lock When the Function Key Lock is enabled only the Power button is active Press the lt Volume gt Volume andthe Menu buttons simultaneously again to unlock the function keys 13 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual HOW TO ADJUST A SETTING Main Menu Main Menu ow 29 FUNCTION DESCRIPTION Select the Brightness the Main Menu Enter the option b
11. hannel based on the IPC protocol The host can request EDID information over the DDC2B channel THIS MONITOR WILL APPEAR TO BE NON FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY THERE MUST BE A VIDEO INPUT SIGNAL This monitor meets the Green monitor standards as set by the Video Electronics Standards Association VESA and or the United States Environmental Protection Agency EPA and The Swedish Confederation Employees NUTEK This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present When there is no video input signal this monitor following a time out period will automatically switch to power saving mode This reduces the monitor s internal power supply consumption After the video input signal is restored full power is restored and the display is automatically redrawn The appearance is similar to a Screen Saver feature except the display is completely off The display is restored by pressing a key on the keyboard or clicking the mouse 17 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual TECHNICAL SUPPORT FAQ amp AFOR GENERAL PROBLEMS PROBLEM amp QUESTION POSSIBLE SOLUTION Power LED is not on Check if the Power Switch is in the ON position Power Cord should be connected No Plug amp Play Check if the PC system is Plug amp Play compatible Check
12. ial version www pdffactory com User s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off The other control buttons are located on the front panel of the monitor See Figure 4 By changing these settings the picture can be adjusted to your personal preferences e The power cord should be connected Connect the Signal cable from the monitor to the VGA card e Press the power button to turn on the monitor The power indicator will light up MENU AUTO Figure 4 Control Panel Buttons CONTROL PANEL BUTTONS 1 Menu Enter 2 Auto Adjustment 3 Volume 4 Volume 5 Power Button 6 Power Indicator 12 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual FRONT PANEL CONTROL Power Button Press this button to switch ON OFF of monitor s power Power Indicator Green Power On mode Orange Power saving mode MENU ENTER 1 Activates the OSD menu or confirms adjustments to settings 2 Exit OSD volume display when in volume OSD status Volume gt lt 1 Activates the volume control when the OSD is OFF 2 Navigate through adjustment icons when OSD is ON or adjust a function when function is activated Auto Adjust button for D sub only When OSD menu is in off status press and hold this button for more than two seconds to activate the Auto Adjustment function The Auto A
13. ment option to reduce the horizontal flicker of Adjustment characters on the screen Enter the option and adjust the level Exit Exit the OSD menu function Color Settin Color Setting R G B TULL FUNCTION DESCRIPTION Move the cursor to one of the preset options and select it Move the cursor to the User option and select it 1 To adjust the red enter the option and adjust the level our 2 To adjust the green enter the G option and adjust the level 3 To adjust the blue enter the option and adjust the level Exit Exit the OSD menu function OSD Settin OSD Setting a oso H Position FUNCTION DESCRIPTION OSD H Position Select the OSD H Position option to adjust the horizontal position of the OSD Enter the option and adjust the level OSD V position Select the OSD V Position option to adjust the vertical position of the OSD Enter the option and adjust the level Select the OSD Time out option to set the OSD time out from 10 to Cenine our 120 seconds Enter the option and adjust the level OSD Select the OSD Transparency option to adjust the transparency of the Transparency OSD Enter the option and adjust the level OSD Color Select the OSD Color setting option to adjust the color of the OSD Enter the option and adjust the level 15 PDF created with pdfFactory Pro trial version www pdffactory com
14. on is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operations CANADA This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulation This device complies with requirement of EMC directive 89 336 EEC with regard to Electromagnetic Compatibility and 73 23 EEC and 93 68 EEC with regard to Low Voltage directive Socket outlet shall be near the equipment and shall be accessible 2 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual HODevelopment 0 lopment Congratulations The display you have just purchased carries the TCO 03 Displays label This means that your display is designed manufactured and tested according to some of the strictest DISPLAYS quality and environmental requirements in the world This makes www tcodevelapment com for a high performance product designed with the user in focus that also minimizes the impact on our natural environment Some of the features of the TCO 03 Display requirements Ergonomics e Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems Important parameters are luminance contrast resolution reflectance colour rendition and image stability Energy e
15. stances We strongly encourage you to contact the provided information to recycle this product For more information please visit www hannsg com 4 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual TABLE OF CONTENTS SAFETY NOTICE cccsssesssesssesssesssssscesssesssessessscssscsssesssesssessnesanesanessesseceseesssessses 6 PRECAUTIONS 6 SPECIAL NOTES ON LCD 7 BEFORE YOU OPERATE THE MONITOR 8 Be ee ia 8 CHECKING THE CONTENTS OF THE PACKAGE 8 INSTALLATION 9 9 MAKING 10 ADJUSTING THE VIEWING 11 OPERATING INSTRUCTIONS 12 GENERAL INSTRUCTIONS 12 FRONT PANEL 13 HOW TO ADJUST A 8 14 LUNG AND PLAY 17 TECHNICAL SUPPORT 18 Q amp A FOR GENERAL 18 ERROR MESSAGE amp POSSIBLE 5 19 SPECIFICATIONS 20 5 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual SAFETY NOTICE 1 The changes or modifications not expressly approved by the party responsible for compliance could
16. t on again to make sure the flicker disappears You may find slightly uneven brightness on the screen depending on the desktop pattern you use The LCD screen has effective pixels of 99 99 or more It may include blemishes of 0 01 or less such as a missing pixel or a pixel lit all of the time Due to the nature of the LCD screen an afterimage of the previous screen may remain after switching the image when the same image is displayed for hours In this case the screen is recovered slowly by changing the image or turning off the Power Switch for hours If the screen suddenly flashes erratically or the backlighting fails please contact your dealer or service center for repair Do not attempt to repair the monitor yourself Lamp Disposal Hg LAMP S INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS FOR MORE INFORMATION CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW EIAE ORG FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW LAMPRECYCLE ORG 7 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 22 Wide screen TFT Color LCD Monitor Crisp Clear Display for Windows Recommended Resolutions 1680 X 1050 60Hz EPA ENERGY STAR Ergonomic Design Space Saving Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items LCD Monitor
17. void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference WARNING To prevent fire or shock hazard do not expose the monitor to rain or moisture Dangerously high voltages are present inside the monitor Do not open the cabinet Refer servicing to qualified personnel only PRECAUTIONS e Do not use the monitor near water e g near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Do not place the monitor on an unstable cart stand or table If the monitor falls it can injure a person and cause serious damage to the appliance Use only a cart or stand recommended by the manufacturer or sold with the monitor If you mount the monitor on a wall or shelf use a mounting kit approved by the manufacturer and follow the kit instructions e Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of the monitor and to protect it from overheating be sure these openings are not blocked or covered Do not place the monitor on a bed sofa rug or similar surface Do not place the monitor near or over a radiator or heat register Do not place the monitor in
18. y 9 pressing the button again and adjust the level Senne Select the Contrast option the Main Menu Enter the option by pressing the Menu button again and adjust the level Image Setting Select the Image Setting on the Main Menu and then enter the option Color Setting Select the Color Setting option on the Main Menu and then enter the option are OSD Setting Select the OSD Setting option onthe Main Menu and then enter the option man Other Setting Select the Other Setting option on the Main Menu and then enter the option Input Settin Select the Input Setting joption to change between the analog D Sub j g or Digital DVI source Enter the option and select Analog or Digital Exit Exit the OSD menu function Image Setting Image Setting SSS H Position FUNCTION DESCRIPTION H position Select the H position option to shift the screen image to the left or right Enter the option and adjust the level V position Select the V position option to shift the screen image up or down Enter the option and adjust the level Clock Select the Clock Adjustment option to reduce the vertical flicker of Adjustment characters on the screen Enter the option and adjust the level 14 PDF created with pdfFactory Pro trial version www pdffactory com User s Manual Phase Select the Phase Adjust
Download Pdf Manuals
Related Search