Haier WMS650 User's Manual
Contents
1. Water level Water quantity about Maximum 43L Medium 36L Minimum 30L Rated washing capacity kg 6 5 Rated spinning capacity kg 5 0 Rated input power W Wash 320 Spin 150 Dimension mm L760 W440 H900 Wash pattern New current Weight kg 23 5 Injection pressure 0 02MPa 0 2MPa2. Do not put the machine at damp place Do not wash water proof laundries such like the bathroom Never wash it with as the raincoat bicycle shelter etc To water Do not place wet laundries on the avoid abnormal vibration during spinning control panel Do not share one receptacle with other electric appliances Do not use it in case that the power plug is damaged or the inserting into the receptacle is loose Safety precautions Before Using Do not put handinto the rotating tub Itis dangerous even if the rotation speedis slow Take special care of thechildren Keep children awayfromthe washing machine to avoid them climbing on it Do not decompose repair or alter the machine by yourself Do not put anyhot orheavy items such as the kettle with hot water onthe washing machine Do not wash laundries with volatile materials suchas thinner petroletc The handicapped or children shall not use the machine without care Toprotect your laundries and washing machine please take out all of the coins buttons sand hairpin and other foreign materials before washing T Fo P Keepthe machine away from direct sunlight and heat source like the heater Please check if the water faucetis open and if the connection of the water inlet pipe is proper itis suggested to use foamless washing powder Installation and adjustment Before Using Please install and adjust the machine acc
3. WMS650 Haier Twin tub Washing Machine with Pump Please read this manual carefully before using Retain it for future reference Please check if the power receptacle has good earthing condition before using to guarantee your safety The manufacturer will not bear the responsibility for those risks occurred from not obeying this manual Contents Before using Names of the parts the 2na cover Safety precautions c cece 1 Installation and adjustment 3 Introduction of the major functions 5 Using process Preparation before washing 6 The musts in washing neeese 7 Usage of the detergent 8 Washing sequence seese 9 Disposal after washing 13 Trouble shooting Answers to question 1S Packing SE c 26tnce cece ortticwbaeieeey 17 Specification the back cover Names of the parts Before Using Control panel Spin water filling entrance Spin timer Outer cover of the spin tub Wash selector Inner cover of the spin tub Wash timer Spin tub frame Spin tub Transparent lid Overflow filter Wash water filling entrance Water level adjusting lever Cabinet Drain hose hook Power cord Lint filter Installed by user Pulsator Wash tub Drain hose Wash tub cover Base frame Accessories Meaning and description of the symbols Water filling jointer one piece C
4. Figure 3 Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine Please clean it every two months 1 Take off the overflow filter As indicated in the figure nip the elastic fixing claw and pull it to the direction of the arrow to take it off Elastic fixin claw 13 14 Cleaning the overflow filter 2 Take off the corrugation pipe Dismantle the upper part of the corrugation pipe inside the overflow filter as indicated in Figure 1 Cleaning the overflow filter Clean the lint around the filter and flush with tap water Install the overflow filter 1 Install the corrugation pipe 2 Insert the mounting plate at the bottom of the filter into original position 3 Hang up the hook at the left upper side 4 Push the upper part in as indicated in Figure 2 Using process Water level adjusting lever Corrugation Pipe Figure 1 Figure 2 Disposal of the complete unit Wipe the complete unit with soft cloth twisted dry Wipe with neutral detergent if too dirty Do not wash it directly by water After washing dismount the water inlet hose Do not store water in the tub for long period Discharge the water immediately after each using Pull off the power plug and hang up the power cord Hang up the drain hose Wipe off the water drops on the surface and inside the tub with clean soft cloth Open the c
5. dard laundries under dry condition that can be washed or spinned in one time Laundries quantity in one washing cycle shall be lower than the rated capacity e The thickness size type of the cloth will influence the actual washing capacity It is suitable to put in reasonable amount of laundries and the laundries can be turned round in washing for one time washing Do not select Maximum water level for laundries less than 2 4kg so as to avoid splashing of water Working suit up down cotton about 1120g Jeans about 800g Blanket Ccotton about 900g lt 2 Gp Blending coat about Le gt Jacket Shirt F cotton about Ccotton about A 800g 300g Y k SS Single bed sheet gA p cotton about 600g Undershirt kin cotton about 180g Underpants Socking g cotton about 70g blending about 50g Usage of the detergent Using process How to use the whitener Fill water to decided level Dilute the whitener with container Pour it slowly into the washing tub Avoid using whitener on laundries with color or pattern as they are prone to lose color The whitener shall not touch the laundries directly Refer to the user s manual for the usage and quantity of the whitener For powder whitener please dissolve it before using How to use the washing powder Direct dissolved in the machine The powder is more prone to pollute the 1 Fill small quantity of water laundries than t
6. h tub See to Figure 3 Embed the drain hose into the groove with m hands Take care not to damage the drain Extend to the spin tub side hose in fastening the fixing clamp Embed into the groove in turn Extend the drain hose from the rear side Figure 3 e Take out the drain hose from the fixing groove Extend it from the rear side as per the direction of the arrow When the drain hose is extended from the rear side it can be hung on the point for drain hose at the two sides of the cabinet D See to Figure 4 Figure 4 Select the water level Select water level according to the quantity of the laundries e Set the water level adjusting lever Water level to needed line indicator Maximum about 43L gt Medium Cabout 36L gt Minimum about 30L Introduction of the major function Before Using The machine has good comprehensive performance and nice appearance It adopts streamline appearance and full plastic shell which will never get rust For the design on safety and reliability it adopts the wash shelf spin shelf and water inlet groove design and reduces the unfavorable influence on the electrical component by the vapor Therefore it guarantees more safe and reliable washing It adopts complete enclosed base frame and low noise motor and thus reduces the working noise significantly We can guarantee that the purchase of this machine will bring you a Clean
7. he detergent Therefore 2 Add the powder Run for 30 seconds to please use it with proper quantity dissolve it completely iti edmi hih Sudsi 3 Put it in the laundries Select suitable nre lala a water level SAEIJS The instant dissolving of the washing powder Dosage of different washing powder is 1 Prepare warm water of 30 C and a container different Please refer to the instruction 2 Add the powder while stirring to fully of the washing powder for the detail dissolve it dosage Selection of the quantity of the washing powder list 1 Standard dosage Laundries Water level quantity Water quantity Concentrated washing Common washing powder powder 3 6kg 6 5kg Maximum about55L About 36g About 43g 2 0kg 3 6kg Medium about46L About 30g About 36g Below2 0kg Minimum about36L About 25g About 30g Selection of the current water level and washing time list 2 i Washing time ae ae anna Laundries minutes Knitwear About3 6 a Cotton blending linen About8 10 Maximum about43L Very dirty and thick About10 13 Bed sheet About7 13 Minimum about30L Silk thin laundries About2 4 Below2 4kg n Chemical fiber About3 6 Medium about36L Cotton blending inen About8 10 Medium about36L 2 4kg 6 5kg Washing sequence Using process Wash timer Spin timer To set to below 2 minute Wash selector no se n os ow ainue irst set to 5 minute then Soft curren
8. me according to the laundries and do spinning encina min Within 1 minute During spinning if there s abnormal sound it is generally owing to slanting placement of the laundries Please stop the machine and re order the laundries In spinning it will pause the work if you open the outer cover of the spin tub Close it to resume the spinning ra N To do spinning and draining or rinsing o with water filling together please first do spinning for around 1 minute then do draining or rinsing with water filling Otherwise the spinning will stop owing to too much water stored in the spin tub a T Disposal after washing Using process After using please clean the lint and foreign materials of the lint filter and overflow filter in time Otherwise it may influence your using the machine Please first pull off the power plug from the receptacle before cleaning Cleaning the lint filter The lint filter must be used during washing it must be cleaned in time after each using 1 Take off the lint filter Put hand at the indicated position Push down to take it off See to Figure 1 Figure 1 2 Clean the lint Put it in water and clean while it is still wet See to Figure 2 Figure 2 3 Install the lint filter After cleaning insert the bottom of the lint filter marked with DOWN SIDE into the overflow filter then push the upper part of the filter in marked with UP SIDE See to Figure 3
9. n the outer cover of the spin tub 2 Insert the water inlet hose into the spin water filling entrance on the control panel Oy Spin water filling Fill water for about 1 minute entrance 3 Close the outer cover of the spin tub Spin for 1 2 minutes 10 Using process Rinsing Rinse with water filing 1 Put the laundries into the wash tub Select suitable current according to the laundries Page Jl gt 2 Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity Then fill suitable water continuously 3 Rinse Adjust the wash timer to 5 7 minutes to do rinsing Repeat the midway spinning and Rinse with stored water rinsing with stored water for 2 3 times 1 Put the laundries into the wash tub Select suitable current according to the laundries Page J gt 2 Fill water to preset water level 3 Rinse Adjust the wash timer to 2 3 minutes to do rinsing When the laundries quantity is below 2 4kg please use SOFT current If you use STRONG current it may splash 11 12 Using process Spinning 1 Put the laundries into the spin tub Selection of the spin time list 3 evenly and smoothly in ti Laundries antes Press the gland in the tub properly eae or About 4 5 Close the inner and outer cover of the spin tub Underwear T knitwear About 2 4 Swear Spin chemical fiber About 1 2 Select suitable spin ti
10. ontents marked with that symbol are related to the safety of the product and the personal safety of the users Please operate in strict conformity to the contents otherwise it may cause damage of the machine or injure the personal safety of the user Warning sign Water inlet hose one piece Forbidding sign Contents marked with that symbol are actions forbidden to perform Performing of those actions may result in damage of the machine or injure the personal safety of the user Gland one piece Lint filter One plece Safety precautions Before Using Please insert the power cord into special The washing machine must be positioned receptacle with rated voltage Be sure to so that the plugis accessible Be sure use single phase three pins receptacle to pull the plug off when there s power The earthing terminal of the receptacle failure or the machine is being moved must be earthed reliably If possible please d hen itis idi adopt electric leakage protector me TE ONE IPS tale If the supply cordis damaged it must be replaced by the manufacturer it s service agent or similarly qualified persons in order to avoid ahazard Keep the pin of the power plug clean KAY A O N The carpet must not obstruct the Do not use water hotter than 50 C ventilation openings in the base of the washing machine Ventilation hole at the bottom of the washing machine
11. ording to the requirement of the manual It is very important to your security and correct operating the machine Usage of the drain hose The drainage shall be smooth with the drain hose 1 The height of the drain hose shall be less than 10cm or the drainage will not be smooth enough and cause incomplete drainage 2 Do not tramp or press the drain hose 3 If the drain hose is too long cut it at mid point To make smooth drainage cut the front end of the hose slantingly 4 f extra drain hose is needed please make separate purchase The inner diameter of the extra hose shall not less than 30mm and the length shall not exceed 1 5m 5 If the extra hose is too long cut it either at point Aor B Install the lint filter After opening the package please take out the lint filter from the document bag install it to the overflow filter of the cabinet See to the figure Before Using How to change the direction of the drain hoses eFigure 1 indicates the ex factory installation position of the drain hose Extend the drain hose from the side of wash tub e Put soft items on the ground Lean the machine down gently with the front surface facing the ZS ground Take off the drain hose from the cabinet O K2 Take the hose out of the fixing groove fro o See to Figure 2 gical Soft item Embed the drain hose into the groove along the side of thewash tub in the order of 1 2 heading for the side of the was
12. over of the wash tub and the inner outer cover of the spin tub for some time about one hour then close them Trouble shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub please take them out immediately 1 Dismantle As indicated in the figure push the point marked with X to pull the spin tub frame to oblique upwards to dismantle it 2 Install After install the back edge of the spin tub frame to proper position push the four points marked with X by force to reset it Please check carefully The laundries may fall to the lower part of the outer side of the spin tub as indicated in the figure If the laundries fall to the outer side of the spin tub during spinning the draining will get blocked and the rotation speed of the spin tub is reduced Oe a Laundries When the remained water is frozen Prevent the freezing be sure to discharge the water completely after using After complete draining set the WASH SELECTOR at STRONG or SOFT If itis set at DRAIN it will be rather difficult for the frozen water to melt When the water is frozen Pour hot water below 50 C into the wash tub to soak it completely Then turn the pulsator with hands gently Please confirm the drainage can work normally before next using 15 16 Trouble shooting Answers to question If there s breakdown please
13. pull off the power plug before checking The following phenomena are not breakdowns sometimes Please confirm again before sending it to repair If there are real breakdowns please come to the special maintenance department or after sale service department of our company Do not repair it by yourself Phenomena The machine does not act The reason Is there power failure Is the power plug loose Is the pulsator twisted by foreign materials The draining does not work Is the drain hose put down Is the drain hose frozen Is the drain hose blocked by foreign material Are there laundries falling to the outer side of the spin tub There s abnormal sound during washing Are there hair pin coins or metal items brought inside the tub There s abnormal sound and violent vibration during spinning Is the machine slanting Is the gland pressed evenly Are there laundries falling to the outer side of the spin tub Are the laundries in spin tub too much There may be some water flowing out of the drain hose in the first use of the machine It is the water remained in the factory inspection of performance Packing list User s manual Water inlet hose Water filling jointer Gland Lint filter Twin tub washing machine 17 Specification Type Twin tub washing machine Model WMS650 Power source Rated voltage 220 240V Rated frequency 50Hz
14. t turn it back it can increase Spin water filling entrance the service life of the timer turn it back it can increase strong current the service life of the timer omens Bay Aum TIMER 1 LINEN WASH pI SPIN J Spin water filling entrance Wash 1 Fill the water and add the dissolved washing powder to make the water level reach the preset position Figure 1 Run washing program for some time to stir and dissolve the powder completely Figure 1 2 Put in the laundries If the water quantity is _ insufficient please add water sTRONG E SOFT ios WASH SELECTOR Fig ure 2 3 Select the current Select the strength of the current according to the laundries Figure 2 4 Select the washing time Select the washing time according to the laundries 12 j WASHTIMER 9 6 COTTON LINEN Figure 3 5 After washing set the WASH SELECTOR at DRAIN Figure 4 Figure 4 WASH SELECTOR Using process Midway spinning 1 Put the laundries into the spin tub evenly and smoothly 2 Spin 1 Put the gland in properly e Please put in the gland properly even if the laundries quantity is small Push Gland Proper The laundries are slanting Proper No gland 2 Close the inner and outer cover of the spin tub Outer cover of The spin tub Inner cover of 3 Spin for 1 2 minutes The spin tub 3 Run the foam removing spinning f Water inlet hose 1 Ope
15. wn the drain hose 4 Slanting or uneverf ground may result in unstable working or abnormal noise Please make the machine stand horizontally Pay attention to followings before washing the laundries Check ifi Clear the Tie the long The quantity of When the pulsator the laundries pocket Take strips fasten the laundries is running the has special out the coins the buttons shallnotbetoo buttons of the requirement sand hairpins close zippers large Stretch laundries may on washing etc and loosenthe cause noise For laundries before the sake of putting themin discretion please the tub put the laundries with buttons into other laundries e s SB Qa amp _ Check if the laundries are applicable for washing with machine Divide the laundries that are not colorfast from other laundries Put those laundries difficult to absorb water into water with hand Forthose laundries with heavy soil please first remove the dirt like mud or dust For the parts with heavy soil please apply detergent on them in advance which can makeit easierto remove the soil Forthose laundries that may get lint ball and those with long fur turnit over before putting in Donot putthose laundries polluted by chemicals into the washing machine directly The musts in washing Using process The capacity of washing and spinning of the machine refer to the largest weight of the stan
16. world without disturbing your quiet life Filling water from wash water filling entrance The appliance is to be connected to the water mains using new hose sets and that old hose sets should not be reused S imie Water inlet hose Insert the water inlet hose into the water filling Pusha entrance then push the water filling jointer into Como handie the entrance on the control panel To dismantle the water inlet pipe just push the control handle as indicated in the figure and pull it out Wash water filling entrance Foam removing spinning during high efficiency rinsing Use the foam removing spinning to Water inlet hos remove the extra detergent liquid It p can both shorten the washing time Py entrance and save the water consumption Foam removing spinnin Spin UNS Fill water for Spin for about about 1 minutes 1 2 minutes Remove most of the foam extra Remove the detergent detergent liquid liquid remained When foam removing spinning during ee Sore aon high efficiency rinsing please fill water 80 of the rated value from the spin water filling entrance Preparation before washing Using process Preparation before washing 1 Connect the water inlet hose 2 Confirm that the washing machine is earthed reliably Then insert the power plug into the receptacle Do not connect the earth terminal to the gas pipe and tap water pipe 3 Put do
Download Pdf Manuals
Related Search