Haier L39Z10A User's Manual
Contents
1. Picture Mode Color Contrast Brightness Tint Sharpness Color Color Temperature Tint Noise Reduction PICTURE PICTURE HO MHOS OOMOS See Basic Operation for using the menu system Picture Mode Choose from Dynamic Standard Mild and User Set this to your preference using the lt gt buttons Press OK to memorise Note Contrast Brightness Color and sharpness can be adjusted in the User mode only They are set in the same way as picture mode Contrast Controls the difference between the brightest and darkest regions of the picture Brightness Controls the overall brightness of the picture Color Control the color saturation Tint Controls the tint NTSC mode only Sharpness Increase this setting to see crisp edges in the picture decrease it for soft edges Color Temperature Choose from Medium Cool and Warm Noise Reduction Choose interference noise modes form Off Low Middle and High OSD Menu 3 SOUND menu Sound Mode Treble Treble Bass Bass Balance Balance Auto Volume SPDIF Mode Auto Volume gt SOUND OM SOUND OMe See Basic Operation for using the menu system Sound Mode Allows you to select among Standard Music Movie Sports and User Set this to your prefered setting Treble Could be adjusted when the sound mode is User Controls the relative intensity of higher pitched sounds Bass Can be adjusted when the sound mode is set to Use2. select the input source make sure the connections are prepared Basic OSD Menu operation Press MENU button to display the OSD menu as below Picture Mode Contrast papas Submenu Color Main menu isa Chanel menu CHANNEL for example PICTURE PICTURE SOUND TIME sa KOROKI Use lt gt button to select the main menu and press V button to enter the submenu In the submenu use W V button to select the function item press lt gt button to adjust setup or press OK button to enter the submenu Press MENU button to return to the previous menu Press EXIT button to exit the menu display Note1 Only when you input the suitable signal the relevant items can be activated Note2 Please operating the OSD menu according to hint on the bottom of the banner OSD Menu 1 CHANNEL menu Auto Tuning ATV Manual Tuning Programme Edit CHANNEL WRI See Basic Operation for using the menu system Auto Tuning Channel Tuning Press OK button to start Auto Tuning You could press MENU EXIT button to exit the process of tuning there will be a hint on the screen and you should press lt button to confirm or press gt button to cancel the operation 0 Programme s 0 48 25 MHz TV Menu ATV Manual Tuning Press OK button to enter the ATV Manual Tuning menu Current CH ATV Manual Tuning Select a Channel for storing the programme r Color System Color System S
3. such as wet or damp places high humidity strong vibration extremely high or low temperatures strong sunlight places which are very dusty Never fit makeshift stands or legs to the television Never push objects into holes and ventilation slots Don t touch the LCD display as it gets warm when operating this is normal and is not a fault To prevent electric shock do not remove any cover If anything goes wrong don t try and fix it yourself get a qualified service agent to look at it To prevent injury this television must be securely attached to the wall or it s supplied stand in accordance with the installation instructions Pull the mains plug out of the wall socket and disconnect the aerial lead during thunderstorms Eye Fatigue When using this product as a computer monitor health and safety experts recommend short frequent breaks rather than occasional longer breaks for example a 5 10 minute break after an hour of continuous screen work is likely to be better than a 15 minute break every 2 hours Do not use the monitor against a bright background or where sunlight or other bright light source will shine directly on the screen CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNINGS e The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus e No naked fl
4. video device Use red for right audio R and white for left audio L Shared with S Video and YPbPr2 S Video Connect the S Video cable from adevice AV OUT VIDEO Connect the Video cable to an external video device R L out Connect the audio cables from the composite video device PC AUDIO AC POWER IN Coax Digital audio output Headphone Connect headphones When it is inserted to the jack the integrated speakers will be muted RF IN Connect to an antenna or digital cable out of the wall not from Cable Box for Digital TV AC POWER IN Connect the power cable to a wall outlet Remote Control Remote Control The remote control is using Infra Red IR Point it towards the front of the TV The remote control may not work correctly if it is operated out of range or out of angle FAV ASPECT 4 INDEX SUBPAGE w wD SIZE REVEAL E E I I I I I l 1 1 l I l I l l l l I I I I I _ I l l I l 1 I I I I I I I I I I I I I I I l l l POWER Turn on standby the TV MUTE Silence status INPUT Source select DISPLAY Display playing status AY Cursor up down keys in OSD menu lt gt Cursor left right keys in OSD menu OK Comfirm button MENU TV system menu EXIT Exit from the current menu 0 9 Choose channel C Go to program you latest program AUTO Auto adjust in the PC mode VOL4 Volume up down PICTURE Select the picture mode SOUND Se
5. 68 1280 720 1360 768 1600 900 1920 1080 Video System PAL NTSC SECAM GNBS Video level 1 0 Vp p 5 480i 480p 576i 576p 720p 1080i 1080p HDMI 480i 480p 576i 576p 720p 1080i 1080p VIDEO AV OUT Video System PAL NTSC OUTPUT only for TV AV APPENDIX APPENDIX Max Resolution And Frame Rate 640x450 30rps Max Date Rate 10 Mbps avi Xvid MPEG 2 MPEG 4 H 264 MPS YE Max Resolution And Frame Rate mp4 MPEG 2 MP2 PCM Py Max Date Rate 20 Mbps MPEG 2 H 264 Movie al mkv MPEG 4 H 264 MPEG 1 MPEG 2 Max Resolution 352x288 MPEG en Max Date Rate 20 Mbps vob MPEG 2 Max Resolution 720 576 Max Resolution And Frame Rate Im RV8 RV9 RV10 COOK 1280x720 30rps T Max Date Rate 10 Mbps P3 Sample Rate 16K 48KHz Bit Rate 16K 320Kbps WM Channel Mono Stereo Sample Rate 16K 48KHz AAC Bit Rate 32K 442Kbps Channel Mono Stereo Progressive JPEG Max Resolution 8195x8195 Beseline JPEG Max Resolution 8195x8195 Max Resolution 9600x6400 Pixel Depth 1 4 8 16 24 32 bpp Non Interlaced Max Resolution 9600x6400 Interleced Max Resolution 1800x1800 File system FAT32 FAT16 NTFS NTFS compressed file is not supported 3 lt ABB oF O jajo
6. Haier LCD TV OWNER S MANUAL MODEL L392Z10A Haier Please READ this manual carefully before operating your TV and retain it for future reference Contents Caution 1 Safety Information 2 3 Accessories 4 Technical Specification 4 Product Introduction 5 Front View 5 Rear View 5 Connections 6 Remote Control 7 8 Basic Operation 9 OSD Menu 10 17 1 CHANNEL menu 10 11 2 PICTURE menu 12 3 SOUND menu 13 4 TIME menu 14 5 OPTION menu 15 Hotel Mode 16 6 PC Steup menu 17 Multimedia Operation 18 21 Simple Troubleshooting 22 Caution Caution Ih pp The lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Correct disposal of this Product Waste Electrical amp Electronic Equipment WEEE Your product is designed and manufactured with high quality materials and components which can be recycled and reused This symbol means that electrical and electronic equipment at their end of life should be disposed of separately from your household waste Please dispose of this equipment at your
7. ame sources such as lighted candles should be placed on the apparatus e To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions e The mains plug shall be the main disconnect device and shall be operable at all times e This appliance is intended for domestic household use only and should not be used for any other purpose Any other use may invalidate the warranty and might be dangerous e If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Accessories amp Technical Specification Accessories User s Manual Remote control Batteries Power code Technical Specification TV System PAL BG DK I SECAM BG DK Screen Size 39 inch diagonal Resolution 1920 x 1080 Aerial input 75 Q unbalanced Audio output power 2x8W Power Consumption 100 240V 50 60Hz 150W Remote Control Type infrared Control distance 5m Control angle 30 horizontal Batteries 2 x 1 5V size AAA Product Introduction Product Introduction Front View S 5 Display the input source menu im Display exit the OSD menu voL Adjust the volume ACHR Scan through channels O Turn on standby the TV set LED indicator o O Remote Control window keep clear IR Infrared Receiver Receives IR signals from the remote co
8. creen and play the file by V button and OK button you can press button to select CANCEL and press OK button to cancel the list displaying Info Display the information of the file Rotate Rotate the photo clockwise counterclockwise Zoom Out In Zoom out in the photo Move View Move the photo in Zoom in mode 2 Music Press lt gt button to select the option on the menu and press OK button to change Pause Play pause the music FB FF Fast backward fast forward Prev Next Play the previous next file Stop Stop the music Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Mute Mute the sound Playlist Display the playlist on the screen and play the file by V button and OK button you can press button to select CANCEL and press OK button to cancel the list displaying Info Display the information of the file Goto Time Play the music from the time you set 19 Multimedia Operation Multimedia Operation 3 Movie Play the movie Press lt gt button to select the option on the menu and press OK button to change Pause Play pause the music FB FF Fast backward fast forward Prev Next Play the previous next file Stop Stop the music Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Set A B Select and play the preferable part of the file by setting A and B at the beginning and end Press OK button to cancel Playlist D
9. e with the following instructions Remember to check the peripherals topinpiont the source of the failure If the display still fails to perform as expected connect your helpline for assistance No power Check all connections to the TV Press either the power button or the Standby button on the Remote control No picture or sound Ensure that the TV is plugged in and the power is on Ensure that the aerial is connected Try a different program Poor picture quality Check the aerial connections Check that the channel is tuned in properly Adjust the picture settings brightness color sharpness contrast hue Make sure that the TV is not located close to electrical appliances that may emit radio frequency interference No colour Adjust the color setting Check that the programme is broadcast in color Check that the channel is tuned properly TV does not respond to remote control Check that there are no obstructions between the remote control and the unit Check that the remote control is within range of the unit Check that the batteries in the remote control and not weak or exhausted This TV is for household use and registered as harmless on electromagnetic waves Therefor you can use it in every location as well as residential areas 22 APPENDIX APPENDIX VIDEO INPUT TV Max storage Channels U TELETEXT 1000Pages PC RGB Format 720 400 640 480 800 600 1024 7
10. elect from PAL and AUTO Sound System Select from BG DK Fine Tune Press lt gt button to fine tune AFC Automatic Frequency control ON OF Search Press lt gt button to manual search Sound System Fine Tune 41 25 MHz AFC On 10 OSD Menu Programme Edit Press OK button to enter the Program Edit menu Programme Edit Delete Rename Move Skip a Enter Fav gt Menu Delete Highlight a channel and press the RED button a red X will appear on the right of the program edit menu next to the channel you have chosen then press RED button again the program will be deleted However if you decide not to continue to delete press the menu button to quit Rename Select an analogue TV channel and press the GREEN button to change the name of the channel using A V lt gt buttons Move Select an analogue TV channel and press the YELLOW button then you can use A and V buttons to change the position of the program press YELLOW again to confirm the change Press menu to automatically save the channel list Skip Select a channel and press the BLUE button to label the channel as long as the channel has a skip label it will be skipped when searching through the channels with the CH buttons Skipped channels can be selected directly using the numeric buttons on the remote FAV Select a program press FAV button to set or delete the program as the favorite channel OSD Menu 2 PICTURE menu
11. isplay the playlist on the screen Info Display the information of the movie Slow Forward Play the movies at slow speed press button to cancel Step Forward Step quickly through the movie by using this option Goto Time Program the movie form the time you set Zoom out in Zoom out in the movie screen Aspect Ratio Select the aspect ratio of the screen display Move View Move the photo in Zoom in mode 20 Multimedia Operation Multimedia Operation 4 Text Play the text jdoajidjdsfjuoisdfjs df sfostjs Press lt gt button to select the option on the menu and press OK button to change Previous Next page Turn to previous next page of the text Prev Next Turn to previous next file Stop Stop auto turning pages Music Play pause the music programme Playlist Display the playlist on the screen Info Display the information of the text The television operation may be halted screen freezes no function operation due to excessive rate of information code errors In such a case restart the system by unplugging the TV from the AC power source waiting 15 seconds and then reconnecting the power source Please note that there are many non standard USB mobile devices in the market If a non standard device is used then an identi cation problem may occur 21 Simple Troubleshooting Simple Troubleshooting If the display fails or performance dramatically deteriorates check the Display in accordanc
12. lect the sound mode SLEEP Time shutting down NICAM Select NICAM mode CH a v Scan the channel Remote Control HOLD INDEX SUBPAGE E E ED SIZE REVEAL GoTo dd Remote Control FAV Display the favourite channel list FAV Scan the favourite channel ASPECT Change the screen display mode Buttons for teletexe TV TXT Teletext on off HOLD Hold or carry on the current subpage INDEX Direct recall of page 100 SUBPAGE Go to subpage SIZE Press to see top half of page double size Press again to see the bottom half of page double size Press again for normal size REVEAL Reveal any hidden text for example quiz answer Buttons for media rill Play Pause program m Stop program M previous chapter i next chapter ROOT Return to root menu GOTO Play your favorite title chapter track 4 fast reverse fast forward COLOUR BUTTONS Short cuts follow the coloured links in the text Basic Operation Basic Operation Power on off 1 Connect to the power supply with the power cord 2 To turn on the TV Press POWER button on the TV or remote control To turn off the TV Press POWER button on the TV or remote control Input Source select Press INPUT button on the TV set or remote control to display input source menu and use A V button on the TV set or A V button on remote control to select the input source press OK button on the remote control to enter Note Before you
13. local community waste collection recycling center In the USA there are separate collection systems for used electrical and electronic products Please help us to conserve the environment we live in Safety information Safety information Safety information Mains supply This television is designed to operate from a 100 240 Volts 50Hz AC mains supply Other power sources may damage it Check that the rating plate states 100 240V AC before you plug it in for the first time The manufacturer accepts NO liability for damage or injury caused by using the product with the wrong mains voltage Mains plug We have fitted this television with a standard mains plug e If for any reason you cut off the mains plug please destroy the old plug as it would be dangerous if inserted into a live power outlet Carefully follow the wiring instructions supplied with the new plug e If a fuse is fitted to the plug remove the fuse before throwing the plug away Never use a fused mains plug without the fuse cover e The mains plug shall be the main disconnect device and shall be operable at all times Safe use and care of your television We have designed and made this television to meet European safety standards but as with any electronic equipment you must take care to stay safe and get the best results Here is some good advice to help you do this Don t continue to use your television if you have spilt liquids in it if it is damaged in any wa
14. lock relative to the sync signal until a stable image is obtained Multimedia Operation Multimedia Operation Basic Operation 1 Press the INPUT button on the remote control to display the input source menu select Media using the lt gt V buttons and press OK to enter the Multimedia menu seen below Input Source J ar C i gt USB device list PHOTO MUSIC MOVIE TEXT 2 Aa D I MAIN MENU 3 Press lt gt button to select the kind of the files you want to display from a choice of PHOTO MUSIC MOVIE or TEXT Press A V button to select the device and press OK button to enter Preview Return to device list Bed 5 e Up Folder ERE TRE A i A p EAAS Information Up Folder mp __ RM TRM ERMS 2008 117 oo Press lt gt MV buttons to move and press OK button to select a file or open a folder Then press P II button to select files You can display the option table on the bottom of the screen by pressing OK press W button to hide Press W again to stop and exit fully 18 Multimedia Operation Multimedia Operation 1 Photo Play the photo Press lt gt button to select an option on the menu and press OK button to select it Pause Play pause the photo view Prev Next View the previous next photo Stop Stop the photo view Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Music Play Pause the music Playlist Display the playlist on the s
15. lt Software Update USB Press OK button to enter the software update menu 15 OSD Menu Hotel Mode You have to enter the code 1001 to enter the Hotel menu as below Default Prog Hotel Mode Source Lock Default Source Default Prog Max Volume v Max Volume Default Volume Clear Lock Set Password HOTEL OOo Hotel Mode Turn on off the Hotel Mode Source Lock Enable the input source you turn on Default Source Select the input source and the TV will play the programs in the source you select when it is turned on Default Prog Select the Start Channel Number and the TV will program the channel you select when it is turned on Max Volume Set the max volume value for the TV Clear Lock Clear all the locks you set above Set Password Set the password for your limiting TV to USB Clone all the hotel settings of the TV to the USB device USB to TV Change all the hotel settings of the TV by the USB device you have cloned HOTEL ODO 16 OSD Menu 6 PC Steup menu in PC mode Auto Adjust ia Horizontal Pos Vertical Pos Clock Phase v SCREEN SERVES Description Auto Adjust Press button to setup the parameter of the screen automatically H V Position Adjust the transverse vertical position of the screen Clock Adjust the pixel clock frequency until the image size is maximized for the screen Phase Adjust the phase of the ADC sampling c
16. ntrol Power on Standby LED indicator Press l to turn on and off Indicator on Red Standby mode Indicator on Green Power on mode The effective receiving range for the signal is 5 8 metres from the front of the remote control window and 30 to the left or right side and 20 above or below the control window Rear View 200mm 400mm o o CNO Connections 6 See next page Connections Connections pi Y Rin i 1 ofey V 4 Video Rin Lin Pr Video R i out S Video Y Pb Pr USB Insert USB storage device to the USB port to view JPEG photos or listen to MP3 music This port is also used for software updates HDMI1 2 Connect the source s for digital video such as a Blu ray player video game console or set top box through this all digital connector VGA Connect a VGA D sub 15 cable from the 15 pin VGA connector on your PC PC audio Connect an audio cable from the audio output or headphone jack of your PC Component YPbPr1 2 Connect the component video cables from a device such as a DVD Player or cable box Use red for Pr blue for Pb and green for Y R L in1 Connect the audio cables from the component video device Use red for right audio R and white for left audio L AV IN Composite VIDEO Connect the cable for composite video from a device such as a DVD player VCR or camcorder R L in Connect the audio cables from the composite
17. off time repeat On Time Press OK button to enter the submenu you can set the time when the TV set will turn on automatically you can also set the on time repeat volume and program NOTE Repeat can be set to OFF ONCE EVERY DAY MON FRI MON SAT SATERDAY SUNDAY or SUNDAY Sleep Timer Allows you to set the sleep timer to 10min 20min 30min 60min 90min 120min 180min 240min and off When the set time has elapsed the TV will switch off Auto Sleep Press OK to enter this sub menu then use the V and A buttons to select the time This unit will switch off itself automatically if no change in status within the last 3 4 5 hours of operation OSD Timer Press OK to enter this sub menu then use the V and A buttons to select the time for the OSD menu display on the screen OSD Menu 5 OPTION menu a Blue Screen OSD Language English Key Lock Hotel Mode Reset TT Language Arabic Aspect Ratio 16 9 Blue Screen Key Lock v Software Update USB OPTION OPTION OBDO H OOO See Basic Operation for using the menu system OSD Language Allows you to select menu language TT Language Seclet the Teletext language Aspect Ratio Choose from 4 3 16 9 Zoom1 Zoom2 and Panorama Blue Screen Turn on off the blue screen function when there s no signal Key Lock Turn on the function and the buttons on the TV will be invalid Hotel Mode See next page Reset Press OK button to restore factory defau
18. r Controls the relative intensity of lower pitched sounds Balance To adjust the balance of the left and right sound track or turn off the volume of the left and right sound track Auto Volume Control the volume of the program automatically when you turn on the function by selecting On This function lowers the volume of loud passages of sound to avoid disturbing the neighbours late at night for example SPDIF MODE Allows you to select among Off PCM and Auto This function will allow connection to a 5 1 digital surround sound amplifier via the COAX output socket OFF will turn off the digital sound output PCM will select pulse code modulation digital sound and AUTO will select other sound formats if the decoder recognises them Set this option to AUTO for default settings OSD Menu 4 TIME menu a Clock Off Time Off Time On Time On Time Sleep Timer Sleep Timer Auto Sleep Auto Sleep OSD Timer v TIME TIME DATON OOO See Basic Operation for using the menu system Clock Use the lt and gt buttons to select the clock icon then use the V and A buttons to Select a sub menu setting the use lt and gt buttons to change the setting press EXIT to quit the menu Note The time is set from the DTV signal automatically and cannot be set manually TIME OPERATION Off Time Press OK button to enter the submenu you can set the time when the TV set will turn off automatically you can also set the
19. y or if it does not work normally Immediately unplug the television and get expert advice Switch off mains power or pull out the power plug when you leave the television unattended unless the function of the television requires a continuous power supply Protect the screen from fingerprints Ventilation Place the television on a hard flat surface away from direct sunlight and heat sources If it is in a cabinet allow at least a 10cm gap all around Don t obstruct the ventilation slots including those underneath with soft furnishings Overheating will shorten the life of the television and increase the risk of fire Cleaning Disconnect the mains supply and use only a lightly dampened soft cloth Do not use chemical solvents or strong detergents as these may damage the cabinet or screen Never allow water droplets to remain on the screen as moisture can cause permanent discolouration Greasy marks must only be removed with a commercial cleaner specifically recommended for LCD screens Safety information Safety information Batteries Remove batteries when the television is not to be used for a long time Batteries left in equipment may cause damage through deterioration and corrosive leakage invalidating the guarantee To protect the environment use local recycling facilities for battery disposal Protect the mains lead You must ensure the mains lead cannot be walked on crushed chafed cut trapped Avoid harsh conditions
Download Pdf Manuals
Related Search