H2O Audio S3-1A1 User's Manual
Contents
1. authorized to perform service The warranty is non transferable and extends to the original purchaser only and is valid only if the equipment was purchased from an authorized dealer Warranty does not extend to cover damage from accident abuse tampering lack o maintenance theft or loss Service or modifications by anyone other than an Authorized H2O Audio agent will void the warranty H2O Audio will not be responsible for recovery or replacement of the product in the event of loss or theft H2O Audio its Authorized International Distributors and Authorized Dealers make no other warranties either express or implied or orally or in writing with respect to any other warranty coverage except those expressly stated within the preceding sentences H2O Audio will not be held responsible for any agreements orally or in writing with the exception of those expressly included in this warranty statement The warranty registration card and the terms contained herein supersede all statements contained in any and all owner s guides instruction cards or other equipment literature or catalogs In no event will H2O Audio its Authorized International Distributors and Authorized Dealers be held responsible or liable for any personal injuries resulting from the use of the covered equipment or for any other damages whether direct indirect incidental or consequential even if H2O Audio has been advised of such damages Warranty does not extend to any damages that2. may occur to the iPod or loss of any data Returning for Service Prior to any return a Return Authorization RA number must be attained Proof of purchase from an Authorized Dealer will be required Contact Custom Support to attain an RA number and shipping instructions A copy of the original sales receipt and a copy of the owner s portion of the warranty card must accompany all correspondence regarding the equipment covered by this warranty agreement or in direct reference to this warranty Customer Support is available Monday to Friday 9AM to 5PM PST Website http www h2oaudio com Phone 800 708 6080 or 858 623 0339 Fax 858 225 0815 Email support h2oaudio com SV iP3G rev 01B General Housing Operations Latch Unlock Lock Operations iPod Insertion Removal Operations T a Connector Step ae latch button towards the Step 1 Lift the top latch over the lid Step 1 Align audio port with stereo Display unlock icon hooks Compress the lid to the base if jack in the housing Window the latch does not clear the lid hooks Step 1 Slide the player off of the stereo jack N G tef Pl ill slid h i f A g ayer will slide up the Click Wheel Ga j Scroll Wheel i a a Push Button A J ee r HIII the housing Step 2 While holding the latch button Step 2 Snap the latch downwards to Mare ane is on the unlock f icon simultaneously lock it in place plug into the push up on the side o
3. off the barbs one by one to obtain the best fit for you Ensure a clean cut and remove any debris from the earplug prior to inserting into your ear FOR OPTIMAL PERFORMANCE For the best performance it is important that the earplug make a complete seal with the walls of your inner ear Many users have had good results by cutting off the first barb as shown above Take some time to find the best configuration for you Modifying both the length of the earplug and its angle of insertion are crucial steps in achieving an optimum fit DISCONTINUE USE AT THE FIRST SIGN OF PAIN OR DISCOMFORT CLEANING PROCEDURES To remove dirt and ear wax wash with warm water and a mild soap Rinse and completely dry the ear tip before placing it back on the speaker Align earplug _ Invert the wide Place the inverted Wrap the with the speaker openingofthe earplug directly earplug around earplug againstthe the speaker until speaker shield it holds securely NOTE Make sure the earplugs are securely in place before proceeding with use IMPORTANT SAFETY INFORMATION Using earplugs limits your ability to hear noises around you regardless of listening volume Use with extreme caution Exercise caution and extreme safety when wearing earphones while surfing wakeboarding swimming walking jogging or other activity Never wear earphones while operating any motorized vehicle bicycle or other machinery It may create a hazard and is il
4. Before using this system please be sure to read understand and follow the instruction of this manual a p hzoaudio SV iP3G www h2oaudio com Copyright Notice This owner s manual is copyrighted all rights reserved It may not in whole or in part be copied photocopied reproduced translated or formed into any electronic format without prior consent in writing H2O Audio is a registrated trademark of Diver Entertainment Systems Inc iPod and Apple are registered trademarks of Apple Computers Inc H20 Audio Products are covered by US Patents 6396769 6614722 Others Pending 1 General Storage Procedures For long term storage keep out of direct sunlight If the housing will not be used for a long period of time store in a plastic bag out of direct sunlight CAUTION The life of a T Seal is typically one 1 year Contact H2O Audio for spare T Seals or a maintenance kit Always remember to reinstall the T Seal before next use Do not expose the housing to extreme heat such as the inside of a hot car or in hot direct sunlight such as a beach or boat deck Doing so may cause damage and subsequent flooding CAUTION The housing is succeptible to internal condensation with extreme temperature fluctuations Use above 105 F 40C can result in internal condensation When used in temperatures below freezing frost will appear on the interior of the housing CAUTION Do not store housing in following environments Solvent
5. MP3 PLAYER VOLUME TURNED TO ZERO AND THE SPEAKERS AWAY FROM THE EARS WHEN TURNING ON THE H20 AUDIO SV UNIT IF THE VOLUME LEVEL IS NOT ZERO WHEN THE H20 AUDIO SV IS TURNED ON IT MAY CAUSE EAR INJURY DUE TO A SUDDEN BURST OF VOLUME THE VOLUME SHOULD BE SLOWLY INCREASED WITH AN AUDIO FILE PLAYING TO SET THE SPEAKER VOLUME TO COMFORTABLE OUTPUT LEVELS PRIOR TO POSITIONING THE SPEAKERS NEXT TO THE EARS DO NOT USE THE HEADPHONES WHILE DRIVING CYCLING OR OPERATING ANY MOTORIZED VEHICLE IT MAY CREATE A TRAFFIC HAZARD AND IS ILLEGAL IN SOME AREAS IT CAN ALSO BE POTENTIALLY DANGEROUS TO PLAY YOUR HEADSETS AT HIGH VOLUME WHILE WALKING OR ENGAGING IN OTHER ACTIVITIES ESPECIALLY AT PEDESTRIAN CROSSINGS YOU SHOULD EXERCISE EXTREME CAUTION OR DISCONTINUE USE IN POTENTIALLY HAZARDOUS SITUATIONS AVOID USING HEADPHONES AT HIGH VOLUME HEARING EXPERTS ADVISE AGAINST CONTINUOUSLY LOUD AND EXTENDED PLAY IF YOU EXPERIENCE RINGING IN YOUR EARS REDUCE VOLUME OR DISCONTINUE USE THE MANUFACTURER DOES NOT WARRANT AND WILL NOT BE HELD RESPONSIBLE IN ANY WAY FOR DAMAGES TO THE iPod OR LOSS OF DATA INCLUDING LOSS OF DATA STORED IN THE iPod RESULTING FROM AN EXCESSIVE IMPACT THUNDER OR AN ELECTRICITY FAILURE OR WATER DAMAGE YOU WILL BE RESPONSIBLE FOR SAFE GUARDING ALL DATA STORED ON YOUR DEVICE 5 Housing Seal This product uses a high grade T Seal DO NOT USE SILICONE GREASE as this will damage the seal The T Seal between the base and the lid o
6. arated from and reattached to the ear wrap While holding the neck band rotate the ear wrap 90 degrees gim A sN my Note Push neckband and ear a wrap together to reattach Step 3 Fully seat the rubber boot Note Do not bend the stereo jack PA There will be two distinct snaps connector during disassembly Scroll Wheel Scroll Wheel overcome during seating Step 3 Wipe clean exposed parts Rotat Cloekwise Rotate Counter Clockwise Select Button Speaker is able to move up and down and swivel for best fit adjustments SV iP3G rev 01A H20 AUDIO SV iP3G Scroll Wheel Assembly Masking Stickers These stickers are to be used to optimize the performance of the Scroll Wheel Assembly of the SV iP3G waterproof housing for the 3RD Generation Apple iPod The 3RD Generation Apple iPod player has a feature in the touch wheel that freezes the buttons of the player if there is a finger on the touch wheel After prolonged continuous use the H20 Audio Scroll Wheel Assembly can activate this feature If this occurs please refrain from touching the controls for a few seconds to let the hard drive come to rest and then regain function of the buttons If function does not resume in a timely manner please follow Steps 1 and 2 SV iP3G Scroll Wheel Assembly Location SV iP3G Housing Scroll Wheel Assembly 3GSticker_revO1 SV iP3G Scroll Wheel Tuning Each iPod is slightly different in thickness For this reason we
7. f the housing is what keeps your iPod safe and dry Itis very important that the seal always be fully seated and free of sand dirt hair lint or other debris Visually inspect the T Seal and Contact Surface prior to each use If you see damage scratches or other imperfections do not use the housing Wipe clean as necessary If you have questions contact H20 Audio Customer Support Contact Surface To ensure the T Seal is fully seated in the base of the housing firmly squeeze on both sides of the housing after each insertion of the player Always check to make sure the latch is closed and locked prior to use 3 Warranty Coverage H20 Audio guarantees to the original purchaser only that the equipment purchased EXCLUDING THE iPod is free of defects in material and or under normal recreational use for a period of one year 1 from date of consumer purchase from an Authorized Dealer provided that proper care and maintenance have been performed as prescribed by the owner s guide included with the equipment Should this product prove to be defective for any reason other than those isted as limitations below the product will be serviced or replaced at H2O Audio s sole discretion at no charge excluding shipping and handling This warranty shall be void if the registration is not completed and sent to H2O Audio Customer Services within 30 days ol purchase This warranty shall be void if the equipment has been tampered with by anyone not
8. f the latch stereo jack Be gentle Do not bend the stereo jack Step 2 Rotate the housing to drop the player into your hand Check the seal and contact surface to make sure it is clean of all debris before closing the lid Y Nex 3 i N f mA Step 2 Gently snap j the player onto the Step 3 Lift the top latch over the lid Step 3 Verify the lid and latch are audio jack hooks Compress the lid to the base if closed and the button is positioned on the latch does not clear the lid hooks the icon prior to entering the water Verify the player is completely seated on the audio jack k i Do not disturb the T Seal during IMPORTANT Make sure the seal is fully seated against Ee removal of the player If the T Seal the housing base each time you close the housing Use j is moved please use the housing lid i z A to completely seat the T Seal the lid to compress the seal into the base if required Headset Connector Operations Headset Operations Refer to iPod Instruction Manual for complete IMPORTANT Mak t the Super O Lub ided to lubricate th i EEE E R A OE a E function details of the player functions connector prior to assembly Refer to instructions included with lubricant Connect Disconnect Step 1 Align jack to connector Step 1 Firmly grab onto rubber boot below the taper of the connector Ear Wrap Separation The neck band can be sep
9. have provided stickers for use on the puck of the scroll wheel shown below to help you set up your housing perfectly for your iPod player Follow the steps to make your SV iP3G work its very best STEP 1 Place your iPod in the housing See Instruction Manual for Details Close the cover then use the Scroll Wheel Assembly and the buttons for several minutes If the Scroll Wheel Assembly and the buttons work well stop there is no need for any modification If the Scroll Wheel Assembly or Sor stop working proceed to If the Scroll Wheel Assembly stops epi working you have too many stickers Note Some iPod Players might require up to 5 stickers Note Remove the iPod from the housing when storing for long periods Note Stickers go on the puck of scroll wheel on top of the existing sticker CUSTOMER SUPPORT H20 Audio 11211 Sorrento Valley Rd Suite Fe San Diego CA 92121 USA Direct 858 623 0339 Fax 858 225 0815 support h2oaudio com STEP 2 If the buttons stop working add a sticker to the scroll wheel Repeat Step 1 by layering the stickers to increase the thickness 3GSticker_rev01 H20 AUDIO SV HEADSET EARPLUG INSTRUCTIONS H20 Audio SV Speaker headsets feature removable earplugs designed to keep water from freely flowing in and out of the ear canal during use TRIMMING EARPLUGS These earplugs were designed to be customized by the user to obtain an optimal fit Use a sharp pair of scissors to cut
10. igned for attachment around the ears and neck The headphones feature a removable connector for users who wish to use other standard headphones with 3 5mm male connectors NOTE Using this system with any other headphone will not be waterproof Leak Test Before utilizing the system for the first time it is highly recommended to perform a Leak Test Follow the instructions below DO NOT INSTALL THE iPod INSIDE THE HOUSING FOR THE LEAK TEST 1 Visually inspect the main housing seal by opening the unit 2 Verify the T Seal is fully seated and free of debris then close and lock the housing using the latch 3 Immerse the housing without the iPod in water and soak for 30 minutes 4 Manipulate the controls at various depths 5 Remove from the water dry the exterior and visual inspect inside the housing for any sign of leaks 6 Open the housing upside down to prevent water from dropping into the housing during opening 7 Only after a successful Leak Test install the iPod in the housing General Use Notice READ THIS MANUAL CAREFULLY IF YOU HAVE ANY QUESTIONS PLEASE CONTACT H20 AUDIO CUSTOMER SUPPORT PRIOR TO USE IMPROPER USE OF THIS SYSTEM MAY CAUSE THE USER TO MAKE MISTAKES OR DECISIONS THAT MAY LEAD TO SERIOUS INJURY OR DEATH IMPORTANT WARNING AND DISCLOSURE THOSE USERS THAT ELECT TO UTILIZE THIS SYSTEM AT OR NEAR THE WATER S SURFACE MUST MAINTAIN SAFETY AWARENESS OF MOVING WATER CRAFTS ALWAYS MAKE SURE TO HAVE THE
11. legal in many areas Never use the earplugs while SCUBA Diving The water pressure may cause damage to the inner ear CUSTOMER SUPPORT H20 Audio 11211 Sorrento Valley Rd Suite Fe San Diego CA 92121 USA Direct 858 623 0339 Fax 858 225 0815 support h2oaudio com EP rev06 Rail Removal for 30Gb or 40Gb iPod SV iP4G for 4TH Generation iPod with Click Wheel Leave rails in place for the 20Gb iPod Remove rails for the 40Gb iPod SV iP3G for 3RD Generation iPod with Touch Wheel Leave rails in place for the 10Gb 15Gb 20Gb iPod Remove rails for the 30Gb and 40Gb iPod Step 1 Use a small Phillips screwdriver in a counterclockwise direction to remove the three 3 screws from the rail Be very careful not to damage the T seal with the screwdriver z iPod is a Registered Trademark of Apple Computer Inc RailRemoval_0305
12. s or other chemical fumes High humidity High Ozone Extreme temperature fluctuations Storage in such conditions may lead to housing damage and leakage Rinse the EXTERIOR of the system in fresh water after EACH use 1 Make sure the housing is sealed and closed and the headphones attached 2 Soak in clean fresh water for 30 minutes 3 Rinse the entire system with freshwater 4 Then completely dry the entire exterior of the system using a clean soft cloth 5 Dry face down so water can properly drain from the Scroll Wheel Strong detergents soaps and chemicals MUST NEVER be used to clean the system If you must use soap it should be a very diluted Introduction The H20 Audio SV iP3G enables you to listen to digital audio while active in water sports to a depth of 10 feet 3m It houses the 3RD Generation Apple iPod With rails in place supports 3RD Generation iPods 10Gb 15Gb 20Gb With rails removed supports 3RD Generation iPod 30Gb 40Gb HOUSING The housing features a simple and secure locking mechanism to keep the unit waterproof during operation The H2O Audio SV housing allows for functional control of the player while submerged in an aqueous environment NOTE The iPod is NOT waterproof without the H2O Audio and NOT covered under the product warranty Any attempt to use the housing with an audio play er other than the 3RD Generation Apple iPod will void the Warranty SPEAKERS The speaker set is specially des
Download Pdf Manuals
Related Search