Home

Grundig LCD TV 46 VLE 6220 BF User's Manual

1. or gt to set the volume 7 Select the line Set Hour with w or A and enter the time with 1 0 8 Save the data with ee green Note m You can abort the entry by pressing e red 9 Press MENU to end the setting Switch off timer In the Auto Off menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Select the line Auto Off with w or A and press OK to confirm 2 Select the line Mode with W or A and use or gt to set the preferred mode 3 Select the line Set Hour with w or A and enter the time with 1 0 4 Save the data with ee green Note m You can abort the entry by pressing e red 5 Press MENUs to end the setting Automatic switch off Auto Sleep If this function is activated the television switches to standby after 5 minutes if no video signal is broadcast 1 Select the line Auto Sleep with w or DAK 2 Activate the function with On Note m To switch off the function use or gt to select the setting Off 3 Press MENU to end the setting or gt Parental control settings Authorising programmes There are films which may be wholly or partially unsuitable for children These programmes contain information which marks the content or scenes with acc
2. 2 Select the subtitles with w or A and press OK to confirm Zoom function 1 Open the Tools menu with TOOLS 2 Select the menu item Zoom with Ww or DAK 3 Press OK repeatedly to enlarge the display in three steps Eco mode This function allows you to reduce the power consumption 1 Open the Tools menu with TOOLS 2 Select the menu item Eco TV with W or A 3 Switch on the Eco mode with or gt 4 Switch the Eco mode off again with or gt Zapping function This function remembers the channel you are currently watching while you switch over to other ones zapping 1 Press 1 0 or P P to select the channel to be stored in the zapping memory and press 4 to confirm 2 Press 1 0 or A W to switch to another television channel 3 Press lt to switch between the saved tel evision channel and the last television chan nel viewed 4 End the function with MENU 22 ENGLISH Electronic TV guide The electronic TV guide provides an overview of all programmes that will be broadcast in the next week for digital channels only 1 Press GUIDE to display channel informa tion Notes m Not all channels supply provide a detailed TV guide m Many broadcasters transmit the current schedule but do not offer detailed descrip tions m There are broadcasters which do not pro vide any information at
3. is deactivated m MEMC will only appear in menus of LCD products with 200 Hz PPR Feature and LED products with 400 Hz PPR feature 5 Press MENU to end the setting SETTINGS Sound settings 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with W or A and press OK to confirm The SOUND SETTINGS menu appears SOUND SETTINGS Volume Balance AVL Sound Type Stereo Sound Mode Normal Sound Preset Speech External connections Audio Output Setup lity Settings Note m Additional operations are explained in the following sections Volume 1 Select the line Volume with W or A and change the setting with or gt Balance 1 Select the line Balance with w or A and change the setting with or gt Automatic volume Television stations broadcast at different vol umes The automatic volume limiting AVL func tion means the volume is kept the same when you switch between channels 1 Select the line AVL with w or A and select the option On with or gt Note m If the SRS TS HD setting has been selected in the Audio Modes line the AVL line can not be selected Stereo two channel sound mono If the device receives two channel sound pro grammes e g a film with the original soundtrack on audio channel B display Dual Il and the dubbed version on sound chan
4. 6 24 7 HD Sport DIV DIV D DTV ca 16 TV Sport DTV Life eters COROT 22O 16 ENGLISH 3 SAT1 DTV 8 HD Test DTV DTV D 13 Film 14 DTV D 18 SKY 19 20 DTV Selecting channel lists 1 Open the menu with MENU 2 Select the SOURCE SETUP menu with w or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Programe Table with w or A and press OK to confirm The menu PROGRAM TABLE appears Important m Programe table and favourites lists are saved separately according to the different input sources cable and air m When opening the programme table the respective channel list for the current input signal appears Note m If in the Program Table 4 appears added to the name of the channel you need a Cl module and a Smart Card for watching these channals Network ALL 4 N24 5 SAT3 DTV DTV 9 3sat 10 RTL DTV Promo 15 DTV DTV Sport1 DTV DTV Select favourites 1 SETTINGS Creating lists of favourites You can save your favourite channels in up to four favourites lists FAV 1 to FAV 4 Notes m Favourites lists must be created separately for all input sources cable and air m You can select the favourites list by pressing FAV 1 In the PROGRAM TABLE menu switch over to the list view with eee yellow 2 Select the channel of your choice with w or A 3 Push t
5. Auto matic OAD with w or A and use or gt to select the option On The software will be updated automati cally as far as possible 2 Press MENU to end the setting Restoring the television to the default settings This function allows you to delete the channel lists and all custom settings 1 In the SETTINGS menu select the line Restore Factory Defaults with w or A and press OK to confirm 2 Press ee green to confirm the warning message The Source Setup menu appears 3 Continue the settings with the chapter Initial setup and tuning television channels on page 14 OPERATION USING EXTERNAL DEVICES___ DIGI LINK Your television is equipped with the DIGI LINK function Qg This function uses the CEC Consumer Electronics Control protocol CEC allows external devices which are connect ed to the HDMI sockets by an HDMI cable e g DVD player to be operated with a remote control Prerequisite is that the devices connected support CEC Read the operating manual for the external device to find out how to activate the correspond ing function The DIGI LINK functions on your television Switching on the television automatically from standby If the Autom switch on TV function is activated On then once the external device e g DVD player is switched on the television also switches on and the appropriate HDMI preset is sele
6. Card Ask your specialist dealer The range of channels available from the pub lic broadcasting institutions ARD with EinsEx tra EinsFestival or ZDF with ZDF Info and all third party broadcasters are not encrypted and can be received without a SmartCard GENERAL INFORMATION Important notes on environmental protection m The following information will help you to save resources and money as well m f you are not using your television set for several days you should pull out the mains plug for environmental and safety reasons This way the television does not consume any electricity m As switching off the television set does not completely disconnect it from the mains pull out the plug to disconnect it from the mains completely m If the device is equipped with a power switch switching it off using this switch will be suffi cient The energy consumed by the television set is reduced to virtually O W m In standby mode the television set uses very litle energy However it may be necessary to leave the television set in standby mode for cer tain functions for example automatic switch on and switch off and for timer functions m The television set uses less energy when the brightness is reduced ENGLISH _7 CONNECTION AND PREPARATION Connecting the antenna and power cord la To receive terrestrial digital broadcasters DVB T connect the cable for the rooftop or indoor antenna passive or active indoo
7. HDMI1 to HDMI3 and press OK to confirm 2 Open the menu with MENU 3 Select the menu item SOURCE SETUP with W or A and press OK to confirm The SOURCE SETUP menu appears HDMI SOURCE SETUP n Source DIGILINK Device Selection GRUNDIG DVD RC Passthrough 4 Select the line Remote Control with w or AK 5 Select the type of operation RC Pass through Deck or Tuner with or gt Notes m RC Passthrough can be used for all devices Deck and Tuner can be selected in ac cordance with the external device which has been connected m Try out which type of remote control opera tion the external device reacts to the best m Read about the scope of functions of the DIGILINK compatible device in the respec tive operating manual 6 Press MEINU to end the setting 36 ENGLISH Switching the device to standby This option switches the external device to standby Press mb gt k use W A or gt to select the preset HDMI1 to HDMI3 and press OK to confirm Open the menu with MENU Select the menu item SOURCE SETUP with V or A and press OK to confirm The SOURCE SETUP menu appears Select Device Standby with w or A and press OK to confirm The external device switches itself off OPERATION USING EXTERNAL DEVICES__ High definition HD r
8. and press OK to confirm The settings used in Home Mode help to save energy Alternatively the menu item Shop Mode can be selected which the retailer can use for demonstrating the device functions Note m End the Shop Modex by restoring the tel evision set to its default settings see page 34 4 Select the country in which the television set is operated with gt W or A and press OK to confirm The Source Setup menu appears with the Connection Typex line marked Note m You can find a description of how to tune the television channel of your choice de pending on the antenna connected in the following chapters SETTINGS Tuning terrestrial television channels DVB T In the Source Setup menu in the Connec tion Typex line select the option Air with or gt Select the line Scan Type with w or DANK Use or gt to set the required scan type DTV scan for digital television channels ATV scan for analogue television channels ATV amp DTV scan for analogue and digital television channels Caution m The antenna power supply 5V may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irrepara bly damage your antenna
9. uncompressed m Presets HDMI 1 HDMI 2 or HDMI3 1 Connect the HDMI1 HDMI2 or HDMI3 socket on the television and the corresponding HDMI socket on the external device using a standard HDMI cable digital video and audio signal With analogue video signal progressive m Suitable devices DVD recorders players games consoles m Video signal YUV resolution standard 576p HDTV 720p 1080i 1080p m Audio signal stereo analogue E Component preset 1 Connect the COMPONENT Y AV2 Pb Pr sockets on the television to the corre sponding sockets of the external device with RCA cables video signal 2 Connect the gt COMPONENT L R sockets on the television to the corresponding sock ets of the external device with RCA cables audio signal 38 ENGLISH Using the SCART socket CVBS RGB signal m Suitable devices Digital satellite receiver DVD player recorder set top box games con sole video recorder decoder m Video signal CVBS RGB m Audio signal stereo analogue E AV 1 preset 1 Connect the AV1 S VHS socket on the television and the corresponding socket on the external device using a SCART cable video and audio signal Activating a decoder If a decoder is connected to the AV1 S VHS socket this must be activated to provide an unencrypted video audio signal 1 Open the menu with MENU 2 Select SETTINGS with w or A and pr
10. 3 4 with 1 0 3 Enter your new four digit PIN code with 1 0 4 Enter your new four digit PIN code with 1 0 again 5 Press MENUs to end the setting Locking television channels You can lock individual television channels for example channels unsuitable for children using a personal PIN code 1 Open the menu with MENU 2 Select the SOURCE SETUP menu with w or A and press OK to confirm 3 Select the line Program Table with w or A and press OK to confirm The PROGRAM TABLE menu is dis played 4 In the PROGRAM TABLE menu switch over to the list view with eee yellow 5 Select the channel to be locked with w or A 6 Select the column Lock with or gt and press OK to lock the channel 7 Enter the PIN code 1234 with 1 O The channel is marked using Note m To remove the lock select the channel again with W or A press OK to confirm and then enter the PIN code 1 2 3 4 using 1 Ok 8 Press MENU to end the setting 34 ENGLISH Updating software for digital channels only 1 In the SETTINGS menu select the line Check For Updates updates with w or A and press OK to confirm A search for new software will be made and if available it will be installed Note m If a search for software updates should be made automatically select the line
11. 46 inch Maximum power consumption Maximum resolution Operational 180 W WUXGA 1920 x 1080 Annual power consumption ee 120 kWh Weight approx 20 kg Audio output 2 x 20 W music power output 2 x 10 W Sine wave power Rohs Limits Pb Lead Hg Mercury Pb meets ROHS directive O mg Peak luminance ratio 65 Digital reception ranges Cable Overall band 110 MHz 862 MHz Modulation 16QAM 32QAM 64QAM 128QAM and 256QAM Symbol rate 4 0 Msym s to 7 0 Msym s Terrestrial DVB T VHF UHF band Bandwidth 7 MHz and 8 MHz FFT Size 2k 8k Modulation 16QAM 64QAM QPSK Guard Interval 1 4 1 8 1 16 1 32 Terrestrial DVB T2 VHF UHF band Bandwidth 7 MHz and 8 MHz FFT Size 1k 2k 4k 8k 16k 32k Modulation 16QAM 64QAM 256QAM QPSK Guard Interval 1 4 19 256 1 8 19 128 1 16 1 32 1 128 As this feature is optional it is not available in all products Dimensions W H D 108 3 cm 66 6 cm 4 3 cm Analogue reception ranges C02 C80 special channels SO1 41 Technical changes and errors reserved 50 ENGLISH INFORMATION Troubleshooting If the information provided below does not help please consult an authorised GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers Screen lit snow but no Antenna cable Is the antenna cable connected station visible No TV channel tuned Start a channel
12. A and press OK to confirm The SOURCE SETUP menu appears Select the line Source with w or A and press OK to confirm Select the option Air with gt W or A and press OK to confirm Caution m The antenna power supply line Active Antenna Power may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irreparably dam age your antenna Select the Active Antenna Power with w or A Switch on the antenna power supply for the antenna with or gt On Select Digital Manual Tuning with w or A and press OK to confirm The menu appears Enter the channel number directly with 1 O and press OK to confirm After the search is complete the channels found are displayed in the Results menu Press MENUkK to finish the setting ENGLISH 45 SPECIAL SETTINGS Tuning analogue television channels This setting is only necessary if you cannot re ceive any digital channels and you have not car ried out an analogue search during initial setup The television channels can be set directly or using the scan Setting all analogue television channels Analogue channels are displayed in the channel list after the digital channels Note m Plug th
13. V A or gt and confirm with OK Repeat the entry for further letters numbers Note m Use the ABC button to switch to upper case letters and use the 123 button to switch to symbols and numbers 4 Save the channel name by using W A or gt to select Submit and confirm with OK Note m f you wish to enter other channel names repeat steps 1 to 4 Skipping television channels You can highlight television channels to be skipped when you select with A or w Selection is still possible using the number buttons 1 Inthe PROGRAMETABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with w or A 3 Select the column Skip with or gt and use OK to mark the channel The channel is marked using Note m Channels can also be reactivated Select the channel with w or A then select the column Skip and reactivate the channel with OK as ENGLISH Creating lists of favourites You can select your favourite channels and save them in up to four favourites lists Fav 1 to Fav 4 1 In the PROGRAME TABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with w or A 3 Use or gt to push the channel into one of the favourites lists 1 to 4 and press OK to confirm The positio
14. all 2 Press W or A to select a television channel Today s programmes on the television channel selected are displayed 3 Switch to the information about the current programme with gt Notes m You can open and switch off the extensive programme information with m You can can added the selected broadcast to the memory timer by pressing OK 4 Press W to select information on the next programme and A to return to the infor mation for the current programme 5 Select programmes on over the coming days with ee green and switch back to the cur rent day with e red 6 Switch back to the channel selection with Note m Filter for certain programmes with eeee blue select the channel type with gt V or A and press OK to con firm Programmes which match the selected channel type are displayed 7 Quit the electronic TV guide with gt MENU TELEVISION OPERATION Changing the picture format The television automatically switches to the 16 9 format if this format is detected via the SCART socket 1 Select the picture format with lt gt The picture format for example 16 9 is displayed You can choose between the following picture formats A Auto format The picture format is automatically switched to 16 9 for 16 9 programmes The picture format is automatically switched to 4
15. as direct sunlight fire etc Do not use old and unused batteries together m Only replace the exhausted batteries with those having the same model value and prop erties m To avoid environmental health problems aris ing from the product batteries and accesso ries m Make sure the mains plug is freely accessible Caution m If you plan on using a wall bracket for your television make sure you read the assembly manual for the wall bracket or have a spe cialist assemble it m When purchasing the wall bracket make sure that all the fastening points on the televi sion are also on the wall bracket and that they are all used when mounting it ENGLISH _5 GENERAL INFORMATION Special features of your television set m You can receive and watch digital TV channels using your television set via DVB T and DVB C including High Definition programmes HD However the reception of digital TV channels in HD is currently limited to a few countries in Europe m Although this television set complies with the current DVB T and DVB C standards status August 2010 the compatibility with future ter restrial DVB T and DVB C cable programmes cannot be guaranteed Your television set can receive and process all analogue and non encrypted digital TV channels The television set is also equipped with digital and analogue receivers m The electronic TV guide for digital channels only informs you about any schedule ch
16. channel search which searches for terrestrial channels DVB T cable channels DVB C and analogue channels You start the search and can then copy the tel evision channels into four favourite lists and sort them there into your order of preference For DVB T and DVB C channels 1000 presets and 100 presets for analogue channels The various settings Depending on the type of antenna connected you can decide which channels you would like the television to search for m Tunes digital terrestrial television channels on page 15 m Tunes digital television channels from the cable provider on page 15 m Tunes analogue television channels in the chapter Special functions starting on page m Further settings for digital television channels after the initial se up can also be found in the chapter Special functions starting on page 43 Note m Make the language and country selection for all types then continue reading the respective chapter 14 ENGLISH Selecting language country and operating mode 1 Switch on the television set from standby with 1 0 or P or P During initial set up the Installation Guide will be displayed Help m lf this menu is not displayed restore the television set to its default settings see page 34 2 Select the menu language with gt W or A and press OK to confirm 3 Select the mode with or gt
17. input I Switches the television on and HDMI3 HDMI socket back into standby mode audio videoinput V V Adjusts the volume Q Headphone jack 3 5 mm selects menu functions jack plug Sockets for audio output MENU A with USB USB socket for external P or P data media Activate the function with k V HDMI HDMI S08 et Confirm the function with audio video input V or V CI Common Interface Slot Press MENU to quit the menu SOURCE Opens the pre selection for AV channels In the menu press P or P to select and press SOURCE to confirm P P Switches the television on from standby selects channels in steps selects function in the menu ENGLISH 11 OVERVIEW The remote control Main functions Switches on from standby Selects channel directly Selects the channel list All FAV 1 to FAV 4 Opens the selection menu to change picture formats Then select with or gt and press OK to confirm Displays information Opens the main menu Opens the channel list Opens the TOOLS menu Adjusts the volume Muting Navigation in the menus GRUNDIG Switches on and off Standby Switches between teletext and TV mode Opens the HDMI CEC De vice List Zapping function switches back one menu level in the menus Opens the electronic TV guide Opens menu for AV channels and USB input Th
18. scan Insufficient contrast in picture The picture settings are not correct Adjust the brightness contrast or colour setting Problem at station Try another channel Picture and or sound distorted Interference from other devices Place the device in a different position Ghosting reflection Channel setting Automatic or manual tuning fine tuning Have antenna cable or system checked No colour Colour intensity too low Turn up the colour Adjust TV standard if setting option Select the correct colour standard is available Problem at station Try a different channel Picture but no sound Volume is set to a minimum Turn up or switch on the volume Teletext impaired or absent Problem at station Try a different channel Television channel no teletext Try with a different TV channel or antenna system carry out fine tuning Station signal too weak Check antenna The remote control does Obstacle between remote control Point remote control at television not work and device Battery problem Check batteries and replace if necessary Operating mode undefined Switch off the television at the mains switch for two minutes Picture too dark in PC mode Incorrect setting for picture resolution Change settings on the PC and picture frequency on the PC e g 1280 x 768 resolution refresh rate 60 Hz Note m This is a Class A product During operation the device could cause radio interference In this case the user may have to remedy this Pleas
19. search function Quick sets the channels according to the information provided by your cable provide in the transmission signal If the option Full is selected the entire fre quency range will be scanned The search can take a long time with this option This op tion is recommended if your cable provider does not support the search type Quick 7 Note m You can accelerate the search To do this you need information about the frequency and network ID You are usually able to get this data from your cable operator or find it in forums on the Internet For example the frequency 402MHz and network ID 61441 can be entered for Germany Start the scan with e red All channel and favourites lists will be deleted and compiled anew Note m After starting the scan a security query will appear Press ee green to confirm the option Yes The Results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note mYou can abort the search by pressing MENU 8 Press MENU to end the setting ENGLISH 43 SPECIAL SETTINGS Searching for television channels from the cable provider manu ally 1 Open the menu with MENU 2 Select the line SOURCE SETUP with w or A and press OK to confirm The SOURCE
20. setting USB OPERATION DivX VOD You must have your device registered in order to play the protected video that you will buy from DivX 1 Select DivX VOD with w or A and confirm with OK Registration Code appears 2 Visit http vod divx com and register the device with the registration code 3 Press MENU to end the setting DI VX DivX Certified to play DivX and DivX Plus HD H 264 MKV video up to HD 1080p HD including premium content ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified de vice must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device USB setup menu Go to vod divx com for more information on how to complete your registration Basic playback functions 1 Select the data medium by pressing gt use V A or gt to select the option USB and press OK to confirm The file browser appears 2 Select the file format video files audio files picture files with W or A 3 Switch to the folder file list with OK Note m USB data medium with several partitions is connected to the US
21. with W or A and press OK to confirm The menu appears SOURCE SETUP 15a AUTOMATIC CHANNEL SEARCH Connection Type Air Country UK Scan Type ATV amp DTV SPECIAL SETTINGS 6 Select the line Scan Typ with w or A and set the option DTV with or gt 7 Start the scan with e red All channel and favourites lists will be deleted and compiled anew Note m After starting the scan a security query will appear Press ee green to confirm the option Yes The Reults menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PROGRAM TABLE appears Note m You can abort the search by pressing MENU 8 Press MENU to end the setting Automatic service update If this function is activated possible changes of network operators are updated automatically The unit must be located in stand by mode 1 Open the menu with MENU 2 Select the line SOURCE SETUP with w or A and press OK to confirm 3 Select the line Automatic Service Update with W or A 4 Select the automatic update with or gt Ong 5 Press WENU to end setting Searching for digital terrestrial TV channels manually 1 2 Open the menu with MENU Select the line SOURCE SETUP with w or
22. 3 for 4 3 programmes 16 9 and 14 9 formats For programmes in 4 3 format the picture is stretched horizontally if the 16 9 format or 14 9 format is selected The picture geometry is stretched horizontally With actual 16 9 input sources from a set top box on the SCART socket the picture fills the screen completely and with the correct geometry 4 3 format The picture is shown in 4 3 format LetterBox format The letterbox format is especially suitable for programmes in 16 9 format The black borders which are usually at the top and bottom of the screen are eliminated 4 3 pic tures fill the screen The transmitted pictures are enlarged but are slightly cropped at the top and bottom The pic ture geometry remains unchanged Subtitle format If you cannot see the subtitles at the bottom of the screen select Subtitle Panorama format This setting is suitable for films in an especially wide format During programmes in 4 3 format the picture is stretched horizontally if the Panoramax function is selected The picture geometry is stretched horizontally Overscan format In this mode HD pictures are not cropped by the HDMI sockets or component sockets and are displayed in their original size This only applies in HDMI mode and for resolutions of 720p or above ENGLISH 23 USB OPERATION File formats Your television can work with the following file forma
23. 3 Select the line Active Antenna Power with W or A Switch on the antenna power supply for the antenna with or gt Ong 4 Start the scan with ee green The Search Results menu appears and the search for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLE appears Note mYou can abort the scan by pressing MENU 5 Press MENU to end the setting Tuning television channels from the cable provider DVB C In the Source Setup menu in the Connec tion Type line select the option Cable with or gt Select the line Scan Type with w or DANK Use or gt to set the required scan type DTV scan for digital television channels ATV scan for analogue television channels ATV amp DTV scan for analogue and digital television channels Select the line Cabel Scan Type with w or A Select the preferred option Quick or Full with or gt The search function Quick sets up the channels according to the information pro vided by your cable provider in the trans mission signal If the option Full is selected the entire frequency range will be scanned The search can take a long time with this op tion This option is recommended if your cable pro
24. A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line CA Module with W or A and press OK to confirm Notes m This menu provides operating instructions and after you enter your PIN code ac cess to the PAY TV provider s channels m The remaining settings are described in the operating manuals for your Cl module and smart card m The CA modul is not supported in certain countries and regions please consult your authorised dealer 4 Press MENUs to end the setting SPECIAL SETTINGS Searching for television chan nels from the cable provider automatically 1 Open the menu with MENU 2 Select the line SOURCE SETUP with w or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Cable with gt W or A and press OK to confirm 4 Select the line Automatic Channel Search with W or A and press OK to confirm The menu appears m SOURCE SETUP 15 T AUTOMATIC CHANNEL SEARCH Connection Type Country Scan Type Cable Scan Type Frequency MHz Network ID Select the line Scan Typ with W or A and set the option DTV with or gt Select the line Cable Scan Type with w or A and set the option Quick or Full with or gt The
25. B OPERATION Selecting a track or picture in steps SKIP 1 During playback select the next track picture with P 2 During playback select the previous track picture with 4 Playback begins with the track or picture you selected Selecting a certain passage for playback video files only 1 During playback press OK 2 Enter the passage time with 1 O and press ee green or OK to confirm Fast forward for video and audio files only You can select different speeds 2 fold 4 fold 8 fold 16 fold and 32 fold forwards and back wards 1 Select the playback speed during playback with 4q or D gt P 2 Press gt to resume normal playback Rotating pictures picture files only You can rotate pictures by 90 1 During playback press or gt to rotate the pictures by 90 Repeat functions Options One Repeat the current track will be repeated All Repeat all tracks will be repeated 1 Open the Tools menu with TOOLS 2 Select the menu item Repeat with w or DAK 3 Select All Random One or None by pressing or gt ENGLISH 29 TELETEXT OPERATION TOP text or FLOF text mode 1 Press TXT to switch on teletext 2 Select teletext pages directly with 1 0 or step by step with w and A Return to teletext page 100 with Note m At the bottom of the screen there
26. B sockets the letter for the respective drive e g C appears behind the folder symbol Select the letter of the drive with W or A and press OK to confirm 4 Select the folder or file with w or A and press OK to open it A list of subdirectories appears Note m Switch back to the main folder with lt m 5 Select the track or picture with W or A and press gt to start playing You can view information on the film data by pressing When playing MP3 or WMA data infor mation on the album track and singer is displayed at the left of the menu When playing picture files you can use to display information about the reso lution and size When playing picture cdta press twice to enter the DivX Settings menu Note m When playing picture data the file browser switches off Press llll to display the file browser again 6 Press flJ to pause playback 7 Press gt to resume normal playback 8 Press lill to end playback The file browser appears ENGLISH 27 USB OPERATION Notes m Use A to select Up Folder when you would like to return to the last folder Use Root and then press OK to return to the main folder m t is possible that files which are actually supported do not function correctly in USB mode This is because certain files are not recorded with standardised compression processes although
27. LCD TV 46 VLE 6220 BF AUS GUTEM GRUND CONTENTS SETUP AND SAFETY GENERAL INFORMATION Special features of your television set Receiving digital channels Important notes on environmental protection NOOC p gt 8 CONNECTION AND PREPARATION 8 Connecting the antenna and power cord 9 Inserting batteries into the remote control 10 OVERVIEW 10 Connections on the television set 11 Controls on the television set 12 The remote control Main functions 13 The remote control All functions 14 SETTINGS 14 Initial set up and tuning television channels 14 Selecting language country and operating mode 15 Tuning terrestrial television channels DVB T 15 Tuning television channels from the cable provider DVB C 16 Changing the program table for the digital channels 18 Picture settings 19 Sound settings 21 TELEVISION OPERATION 21 Basic functions 22 Zoom function 22 Eco mode 22 Zapping function 22 Electronic TV guide 23 Changing the picture format 2 ENGLISH 35 35 35 36 37 37 38 39 39 40 41 41 Al Al 42 42 42 42 USB OPERATION File formats Connecting external data media The file browser Settings in the USB setup menu Basic playback functions Additional playback functions TELETEXT OPERATION TOP text or FLOF text mode Additional functions CONVENIENCE FUNCTIONS Opening the SETTINGS menu Language settings Setting the date and time Timer settings Parental contro
28. Notes m If you select Adjustable the volume can be changed in the menu option Audio Out Volume m f the audio should only be output via the HiFi system AV receiver select the option Off in the line TV Speaker with or gt 6 Press MEINU to end the setting OPERATION AS A PC MONITOR Connecting a PC 1 Connect the PC IN socket on the television to the corresponding socket on the PC using a VGA cable video signal 2 Connect the Audiox socket on the televi sion to the corresponding socket on the PC using a suitable cable audio signal Note m Adjust your PC to the monitor for example picture resolution 1280 x 768 picture fre quency 60 Hz Selecting presets for the PC 1 Press sf gt and use W A or gt to select the preset PC and press OK to confirm Settings for PC mode 1 Open the menu with MENU 2 Select the SOURCE SETUP menu item with W or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the function or setting with w or A and then use W A or gt to implement it Auto Ajust Extended settings Auto Ajust Mode On Position 50H 50V Size 0 30 Options Auto Ajust for automatic PC configura tion Auto Ajust Mode select the option On if the configuration should be imple mented automatically in PC
29. SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Cable with gt W or A and press OK to confirm 4 Select Digital Manual Tuning with w or A and press OK to confirm The menu appears 5 Enter the four digit frequency with 1 O and press OK lt to confirm The search starts after confirming the channels found are displayed in the Re sults menu 6 Press MENU to finish the setting 44 ENGLISH Searching for digital terrestrial TV channels automatically 1 2 Open the menu with MENU Select the line SOURCE SETUP with w or A and press OK to confirm The SOURCE SETUP menu appears Select the line Source with or A and press OK to confirm Select the option Air with gt W or A and press OK to confirm VW Caution mThe antenna power supply line Active Antenna Power may only be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irreparably dam age your antenna Select the Active Antenna Power with w or A Switch on the antenna power supply for the antenna with or gt Ong Select the line Automatic Channel Search
30. Speech with or gt Under licence from SRS Labs Inc TruSurround HD SRS and the SfS symbol are trademarks of SRS Labs Inc 20 ENGLISH Equalizer Equalizer offers a sound setting that you can cre ate Equaliser appears in the menu when Sound modex is selected as Spatial or Normale and Sound Medium as User 1 Select Equalizer with w or A and press OK to confirm The EQUALIZER menu appears Note m If the SRS TS HD setting has been selected in the Sound Modex line the Equalizer line will not indicate 2 Select the frequency bandwidth 120Hz with W or A Set the preferred value with or gt 3 Set the next frequency bandwidth with w or A and repeat the setting 4 Press m to save the setting Audio description Audio subtitles Audio description is an additional audio channel for visually impaired persons Descriptions are provided of activities surroundings changes of scene gestures and actors facial expressions This audio channel is transmitted simultaneously with the normal sound on digital channels Avail ability depends on the respective channel and broadcaster 1 Select the line Audio Description with w or A and select the option On with or gt 2 Select the line Volume with W or A and change the volume with or gt Exiting the setting 1 Pr
31. an enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Select the line Sleep Timer with w or rAA 2 Enter the switch off time with or gt Note m To switch off the function use or gt to set the switch off time to Off 3 Press MENU to end the setup Switch on timer In the Auto On menu you can enter a switch on time for the television After the preset time has elapsed the television switches on from standby at the preselected volume and the preselected television channel 1 Select the line Auto On with w or A and press OK to confirm 2 Select the line Mode with w or A and use or gt to select when the television should switch on 3 Select the line Input Source with W or A and use or gt to select the input source 4 Select the line Service Type with W or A and use or gt to select the preferred op tion ATV DTV Radio or DATA 5 Select the line Channel with w or A and use or gt to select the preferred channel Note m The line Channel is only active when the in put signal currently in use has been set If no entry has been made then the first channel of the selected input source will be used CONVENIENCE FUNCTIONS 6 Select the line Volume with W or A and use
32. anges at short notice and provides an overview of all the broadcasters schedules for the next few days Detailed information on the individual television programmes are when provided by the broadcasting station are also avail able in the electronic TV guide m You can connect various data media such as an external hard drive a USB memory stick or a digital camera to the USB socket Using the file browser you can then select and play the file formats of your choice for example MP4 MP3 or JPEG data 6 ENGLISH Receiving digital channels m You require a digital roof antenna or indoor antenna passive or active indoor antenna with its own power supply to receive digital television channels DVB T m If you wish to receive digital television chan nels via your cable system DVB C the an tenna cable for your cable operator must be connected to the television set m Unlike analogue broadcasting not every channel has its own transmission frequency Instead several channels are grouped into what are known as bouquets on a regional or national level You can find the current trans mission information on teletext from various broadcasters or by consulting a current TV guide or the Internet m Various digital television channels from private broadcasters are encrypted DVB T and DVB C Watching these channels and the record ing and playback functions are only possible with the appropriate Cl module and a Smart
33. cted Automatic selection of the HDMI preset on the television If your television is switched on and you then switch on the external device e g DVD player the appropriate HDMI preset on the television will be selected Selecting the menu language The television menu language is automatically selected on the external device e g DVD player The external device must support this function Switching off the external device automatically If you switch your television to standby the ex ternal device if it is switched on will also be switched to standby DIGI LINK is always active on your television set Searching for and activating external devices You can connect up to 11 devices with DIGI LINK functions to your television 1 Open the CEC device list with CEC The HDMI CEC Device List appears 2 Start the device search with e red The devices found are displayed in the menu 3 Select the device for operation with w A or gt and press OK to mark it If the selected device is connected to a different input to the current one a switch to the respective input will occur auto matically 4 Press MENU to end the setting ENGLISH 35 OPERATION USING EXTERNAL DEVICES__ Device operation You can decide whether external devices should react to your television s remote control 1 Press mfp x use W A or gt to select the preset
34. e red to activate 2 Delete the currentchannel with e e yellow delete all channels with eeee blue 3 Confirm the deletion process with ee green 4 Quit the deletion process with 4 Skipping channels You can mark television channels which should be skipped when selecting with A or w It is still possible to select them using the number buttons 1 In the PROGRAM TABLE menu switch over to the list view with eee yellow 2 Select the preferred channel with w or A 3 Select the column Skip with or gt and use OK to mark the channel The channel is marked by Note m Channels can also be reactivated Select the channel with w or A then select the column Skip and reactivate the channel with OK ENGLISH 17 SETTINGS Picture settings 1 Open the menu with MENU 2 Select the menu item PICTURE SETTINGS with W or A and press OK to confirm The PICTURE SETTINGS menu appears O PICTURE SETTINGS n Picture Mode User Brightness 50 Contrast 100 Sharpness 75 Colour 65 Colour Temperature Medium 3 Select the line Picture Mode Bright ness Contrast Sharpness Colour or Colour Temperature with W or A Select the value with or gt and press OK to confirm Notes m When changing the values with or gt the screen will b
35. e contact your specialist dealer ENGLISH 51
36. e rooftop antenna cable for analogue television channels into the ANTIN socket on the television Open the menu with MENU 2 Select the line SOURCE SETUP with w or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Source with w or A and press OK to confirm Select the option Air or Cable with gt W or A and press OK to con firm 4 Select the line Automatic Channel Search with W or A and press OK to confirm CN SOURECE SETUP T Source Air Digital Manual Tuning Analogue Manual Tuning Program Table Signal Information Automatic Service Update ia oy Nea ero 0 Not inserted Active Antenna Power 46 ENGLISH 5 Select the line Scan Typ with w or A and set the option ATV with or gt 6 Start the scan with e red Note m After starting the scan a security query will appear Press ee green to confirm the option Yes All channel and favourites lists for the ana logue channels will be deleted and com piled anew The Results menu appears and the scan for TV channels begins Depending on the number of television channels received this can easily take a few minutes The search is complete as soon as the PRO GRAM TABLE appears Note m You can abort the search by pressing MENU 7 Press MENUK to end the
37. e split You can see the current setting on the left side the new setting on the right side m In the PICTURE SETTINGS menu you can also find other additional settings 4 Select the line DNR Mpeg NR Vibrant Colour Perfect Clear Film Mode Gammax Dynamic Contrast Dynamic Backlight Backlight or MEMC with V Or AK K Select the value with or gt and press OK to confirm 18 ENGLISH Notes m You can only select the Mpeg NR function on digital and AV presets Mpeg NR reduces any interference from artefacts pixel blocks from digital pro grammes due to MPEG compression such as from DVB T receivers or DVD players m The Film Mode detects and processes feature films automatically for all channel sources This means you will always receive an optimal picture This functions in the modi 480i 576i and 1080i in TV playback and for other channel sources If the Film mode is switched on for pro grammes without a feature film signal minor problems such as picture freeze defective subtitles or fine lines in the picture could occur m The function Dynamic Contrast adapts the contrast dynamically and optimally for the respective picture content m With Dynamic Backlight the device opti mally adapts the background lighting to the picture content m The Backlight can only be set manually when the function Dynamic Backlight
38. eady Connection options Connect the cor m Which television socket s you connect your HD responding input external devices to depends on the sockets sources e g HDTV the external device is equipped with and the receiver or HD signals which are available DVD player to the m Please note With many external devices 1080p HDMI sockets the resolution of the video signal must be for digital HDTV adjusted to the input sockets of the television see the operating manual of the external sources device You can find out which values you This ensures that you can view digital HDTV need to set by referring to the guidelines in programmes even if they are copy protected the sections about the various connection HDCP High Bandwidth Digital Content Protec options tion without encountering problems m Do not connect any other equipment while the device is switched on Also switch off the other equipment before connecting it m Do not plug in the power cord of the device until you have connected the external equip ment and the antenna ENGLISH 37 OPERATION USING EXTERNAL DEVICES____ Connecting external devices With digital audio video signals m Suitable devices Digital satellite receivers Playstation BluRay player DVD player recorder settop box notebook PCs m Video signal Digital video resolution stand ard 576p HDTV 720p 1080i 1080p m Audio signal digital audio stereo multichan nel compression
39. en select using W gt or A and press OK to confirm Switches on from standby Selects channel in steps A Moves the cursor up and down in the menus lt Q gt Moves the cursor to the left and right in the menus v Activates various functions and save functions settings 12 ENGLISH OVERVIEW The remote control All functions e red ee green weooek yellow ypeoeoed blue d gt gt l 4 b gt Selects pages in teletext Selects activates various functions in the menus Key has no function Starts playing a programme from an external data medium Freeze frame Playback pause from an exter nal data medium Ends playback of a pro gramme from an external data medium Splits the screen in teletext Switches to double character size in teletext Selects the next title next pic ture in the file browser Refreshes a teletext page Selects the previous track pre vious picture in the file browser Stops scrolling through pages in teletext Starts a fast reverse search in the file browser Reveals answers in teletext Starts a fast forward search in the file browser T Selects different subtitles only for digital television chan nels Selects different audio lan guages only for digital televi sion channels ENGLISH 13 SETTINGS Initial set up and tuning television channels The television set is equipped with automatic
40. es 2006 95 EC directive on electrical equipment for use within certain voltage limits 2004 108 EC directive on electromagnetic compatibility 2009 125 EC directive on ecodesign require ments for energy related products Power consumption values and classes are speci fied according to the regulations 2009 642 and 2010 1062 and the standards EN62087 and EN62301 as per European Union framework di rectives 2009 125 EC and 2010 30 EU Environmental note pi This product has been made from high quality parts and materials which can be re used and recycled Therefore do not dispose of the product along with normal household waste at the end of its service life Take it to a collection point for the recycling of electrical and electronic equipment Dispose of the used device at a collec tion point for electrical and electronic equipment The symbol on the product in the operating man ual or on the packaging indicates that recycling is possible Information on collection points is available from your local authorities Help protect the environment by recycling used products ENGLISH 49 INFORMATION GRUNDIG 46 VLE 6220 BF Preset channels TV Radio 1000 Cable DVB C or Technical data 100 Analogue Operating voltage 1000 Terrestrial DVB T or 220 240 V 50 60 Hz 100 Analogue 8 AV 1 USB Power consumption On mode 82 W Screen dm Standby lt 0 50 W 58 dm Energy Efficiency class Screen size 117 cm
41. ess MENU to end the setting TELEVISION OPERATION Basic functions Switching on and off 1 Press 1 0 or P or P to switch on the television from standby mode 2 Press W to switch the television to standby Selecting channels 1 Press 1 O to select presets directly 2 Select channels step by step with P or P 3 Open the channel list with OK select the preferred television channel with w A or gt and press OK to confirm Exit the channel list with MENU Selecting channels from lists You can select channels from various lists e g all channels FAV 1 to FAV 4 1 Press FAV to open an overview of pro grame tables The overview is displayed 2 Select a channel list with A or w and open it with OK 3 Select a television channel with w A or gt and press OK to confirm 4 Press MENU to exit the channel list Selecting a preset AV channel 1 Open the Select Source menu with f gt 2 Select an AV preset with w A or gt and press OK to confirm 3 Use 1 0 to switch back to the television channel Adjusting the volume 1 Adjust the volume with all Switching sound on off 1 Press to mute the sound or switch it on again Displaying information 1 Display information with The display disappears automatically af
42. ess OK to confirm The SETTINGS menu appears 3 Select the Decoder with W or A 4 Activate the function with On 5 Press MENUs to end the setting or gt With S Video signal m Suitable devices DVD player recorder video recorder camera recorder notebook PC m Video signal Y C m Audio signal stereo analogue m S VHS preset 1 Connect the AV1 S VHS socket on the television and the corresponding socket on the external device using an EURO AV ca ble video and audio signal OPERATION USING EXTERNAL DEVICES_____ With an analogue TV signal m Suitable devices Digital satellite receiver DVD player recorder set top box camera recorder m Video signal CVBS m Audio signal stereo analogue m AV2 lt preset 1 Connect the Y AV2 socket on the television to the corresponding socket of the external device with an RCA cable video signal 2 Connect the L R sockets on the television to the corresponding sockets of the external device with RCA cables audio signal Note m There must not be a video signal at the Y AV2 and AV1 S VHS socket at the same time This could lead to picture distur bances Using a DVD player DVD recorder video recorder or set top box 1 Switch on the external device and select the function you wish to use 2 Press use V A or gt to select the preset for t
43. ess levels of 4 to 18 You can select one of the access levels thereby authorising playback 1 Select the line Parental Guidance with W or A and press OK to confirm 2 Enter the PIN code 1234 with 1 O 3 Select the access level with or gt 4 Press MEINU to end the setting Locking menus This function allows you to lock the Automatic Channel Search Digital Manual Tuning An alogue Manual Tuning and Program Table menus so that they can be only accessed by entering a PIN code 1 Select Menu Lock with W or A 2 Enter the PIN code 1234 with 1 O 3 Activate the lock with or gt Ong Note m To switch off the menu lock use or gt to select the setting Off 4 Press MEINU to end the setting Locking keys Parental lock When the key lock is activated the buttons on the television set do not function 1 Select the line Keypad Lock with w or DAK 2 Enter the PIN code 1234 with 1 O 3 Activate On or deactivate Off the key lock with or gt 4 Press MENU to end the setting ENGLISH 33 CONVENIENCE FUNCTIONS Changing the PIN code You can also enter a personal PIN code instead of the default code 1234 Please take note of your own PIN code 1 Select Set PIN with w or A and press OK to confirm 2 Enter the current PIN code 1 2
44. hannels were stored with the automatic chan nel search while tuning the television channels you can delete them You can also store chan nels in a different preset change or enter the name of a channel as well as skip channels Selecting a channel list 1 Open the menu with MENU 2 Select the line SOURCE SETUP with w or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Program Table with w or A and press OK to confirm The PROGRAME TABLE menu appears Note m Additional operations are explained in the following sections Deleting channels 1 In the PROGRAME TABLE menu select the television channel to be deleted with w A or gt and press e red to con firm 2 Press eee yellow to confirm the deletion process Note E eeeex blue allows all television channels to be deleted 3 Press ee green to confirm the deletion process ENGLISH 47 SPECIAL SETTINGS Entering channel names 8 digit maximum 1 In the PROGRAME TABLE menu select the television channel with v A or gt and press e red to confirm 2 Open the input keyboard with ee green Note m f necessary delete the current channel name To do this select the lt button with or gt and delete repeatedly using OK 3 Select the required letters or numbers with
45. he channel into the favourites lists 1 to 4 with or gt and press OK to confirm The position in the favourites list is marked with V You can enter the same channel in more than one favourite list Each favourite list can store up to 255 channels Note m Channels can also be deleted from the favourites lists Select the channel to be deleted with v A or gt and press OK to delete it m When deleting a channel from the favourites list the order within the favourites list will be updated 4 Press MENU to end the set up Sorting channels in the favourite list You can change the order of channels in the favourites list 1 In the PROGRAM TABLE menu select the favourites list 1 to 4 2 Select the channel which should be moved with W A or gt and mark it with e red 3 Move the channel to its new position with V A or gt and press OK to confirm Notes m Repeat steps 2 and 3 if you would like to change other channels within the same favourites list Repeat steps 1 to 3 if you would like to change channels in a different favourites list 4 Exit the current favourites list with eeee blue The entire programe table will appear again Deleting channels 1 In the PROGRAM TABLE menu select the television channel to be deleted with w A or gt and press
46. he file browser The file browser displays video audio and picture files stored on external data media If an external data medium contains files in different formats you can when necessary filter out the formats not required Main menu of the file browser 19 10 28 06 2010 VIDEO FILES E ROOT Selected data format Total number of folders on the data medium Preview of the selected file Information on the external data medium uh ON Menu navigation 26 ENGLISH Settings in the USB setup menu Selecting the menu 1 Open the menu with MENU 2 Select the SOURCE SETUP menu item with W or A and press OK to confirm The USB SETUP menu appears Note m Additional functions are explained in the following sections Switching on automatic preview If this function is switched on a preview of the selected file then appears in the file browser 1 Select the line Auto Preview with w or A 2 Switch on the function with or gt d Ong 3 Press MENU to end the setting Selecting the display mode 1 Select View Mode with W or A 2 Select the preferred option with or gt 3 Press MENU to end the setting Setting the display duration for pictures in a slideshow 1 Select Slide Show Interval with W or A 2 Selectthe display duration 3 5 10 seconds with or gt 3 Press MENU to end the
47. he input signal AV1 AV2 S VHS HDMI1 HDMI2 HDMI3 or Component and press OK to confirm Headphones Connecting the headphones 1 Plug the headphone jack 3 5 mm jack plug into the headphone socket on the left side of the television Changing the headphone volume 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with Ww or A and press OK to confirm The SOUND SETTINGS menu appears 3 Select the menu item Audio Output Setup with W or A and press OK to confirm The Audio Output Setup menu appears 4 Select the line Headphone with w or A 5 Set the preferred volume with and gt 6 Press MENU to end the setting Note m Prolonged listening with headphones at loud volumes can damage your hearing ENGLISH 39 OPERATION USING EXTERNAL DEVICES____ Hi fi system AV receiver Connecting the hi fi system AV receiver 1 Connect the Optic Out socket on the television to the corresponding socket of the device with an optical digital cable digital audio signal Setting the audio format You can select whether the audio signal output via the Optic Out socket should be in the PCM or AC2 format 1 Open the menu with MENU 2 Select the menu item SOUND SETTINGS with W or A and press OK to confirm The SOUND SETTINGS menu appears 3 Select Audio Output Setu
48. he selected teletext page contains additional pages the number of the current sub page and the total number of pages are displayed 1 Press to open the sub page function 2 Use or gt to select the sub page 3 Quit the function with gt Revealing answers Certain teletext pages contain hidden answers or information 1 Display information with PP 2 Press to conceal the information Split screen This functions allows you to display the televi sion channel on the left side the teletext on the right side 1 Switch the function on with B lt The television channel and teletext are dis played next to each other 2 Switch the function off with I lt CONVENIENCE FUNCTIONS Opening the SETTINGS menu 1 Open the menu with MENU 2 Select the SETTINGS menu with w or A and press OK to confirm The SETTINGS menu appears XX Language se SETTINGS Menu English Audio English Subtitle English Subtitle Mode iii Date and time settings Date amp Time Time Adjustment Time Zone Note m Additional operations are explained in the following sections Language settings Changing the menu language 1 Select the line Menu with W or A and press OK to confirm The Select Menu Language menu appears 2 Select the menu language with gt V or A and press OK to confirm 3 Press MENU
49. is an info bar with red green and depending on the channel yellow and blue panels Similarly the remote control also features buttons with different colours with which these pages can be selected 3 Go back a page with e red 4 Goto the next page with ee green 5 Select a particular chapter with eee yellow 6 Selecta particular subject with e ee e blue 7 Quit teletext with TXT Normal text mode 1 Press TXT to switch on teletext 2 Press 1 O0 to select teletext pages directly Return to teletext page 100 with 3 Go back a page with w 4 Go to the next page with A 5 Quit teletext with TXT Additional functions Skipping the waiting time While a page search is progressing you can switch to the TV programme 1 Enter the teletext page number with 1 0 and then press P As soon as the page is found the page number is displayed 2 Press gt to switch to the teletext page 30 ENGLISH Enlarging the character height If you have difficulty reading the text on the screen you can increase the character height 1 To enlarge the character height of a teletext page keep pressing Page hold A multiple page may contain several sub pages which are automatically scrolled by the broad casting station 1 Stop the automatic scrolling of the sub pages with odd 2 Quit the function with 4q Opening a sub page directly If t
50. l settings Updating software Restoring the television to the default settings OPERATION USING EXTERNAL DEVICES DIGI LINK The DIGI LINK functions on your television Device operation High definition HD ready Connection options Connecting external devices Using a DVD player DVD recorder video recorder or settop box Headphones Hi fi system AV receiver OPERATION AS A PC MONITOR Connecting a PC Selecting presets for the PC Settings for PC mode OPERATION WITH A COMMON INTERFACE What is a Common Interface Inserting the CA module Access control for Cl module and smart card CONTENTS 43 44 45 SPECIAL SETTINGS Searching for digital terrestrial TV channels automatically Searching for digital terrestrial TV channels manually Tuning analogue television channels Changing stored analogue channels INFORMATION Displaying signal information Service information for retailers Environmental note Technical data Troubleshooting Additional Information for units sold in the UK ENGLISH _3 SETUP AND SAFETY Please note the following instructions when setting up the television set m This television is designed to receive and dis play video and audio signals All other uses are expressly prohibited m The ideal viewing distance is five times the diagonal screen size m Light falling on the screen impairs picture quality m To ensure the device is always adequately ventilated make sure there is s
51. mode Position to configure the horizontal and vertical picture position Size to set the cycle frequency Phase to eliminate flicker unfocused pictures or horizontal interference Press MENUs to end the setting ENGLISH 41 OPERATION WITH A COMMON INTERFACE____ What is a Common Interface Common Interface Cl is an interface for DVB receivers m Encrypted channels can only be viewed with a CA module suitable for the encryp tion system and in conjunction with the corresponding smart card m The television set is equipped with a Com mon Interface slot into which Cl modules from various providers can be inserted m You can insert the provider s smart card into the CA module in order to enable the en crypted channels you wish to view Inserting the CA module Note m Switch the device off before you insert a CA module into the Cl slot 1 Insert the corresponding smart card into the Cl module 2 Insert the Cl module with the smart card into the Cl slot on the television Note m In the CA Module sub menu you can see which CA module has been inserted in the Cl slot m If you are inserting a CA module into the Cl slot of the television for the first time you will need to wait a moment until the CA mod ule is detected 42 ENGLISH Access control for CI module and smart card 1 Open the menu with MENU 2 Select the line SOURCE SETUP with w or
52. n 0 004 lead Rechargeable batteries batteries including those which do not contain heavy metal may not be disposed of with household waste Always dispose of used batteries in accordance with local environmental regulations Make enquiries about the appli cable disposal regulations where you live 1 Open the battery compartment by removing the lid 2 Insert the batteries 2 x 1 5 V micro for example RO3 or AAA Observe the po larity marked in the bottom of the battery compartment 3 Close the battery compartment Note m If the television no longer reacts properly to remote control commands the batteries may be flat Always remove used batteries mThe manufacturer accepts no liability for damage caused by leaking batteries ENGLISH _9 OVERVIEW Connections on the television set AV1 S VHS SCART socket CVBS signal Optic Out RGB signal Video and sound socket for S Video camcorder COMPONENT Pb Pr Y AV2 Sockets for video input Audio YUV signal LR Sockets for audio input PC IN YUV signal Audio socket for camcorder ANT IN Y AV2 Video socket for camcorder 1o ENGLISH Socket for audio output optical for PCM AC3 signals For connecting digital AV amplifiers or AV receivers Socket for audio input for a PC VGA socket video input for PC Antenna socket for a DVB T DVB C and analogue antenna OVERVIEW HDMI2 HDMI socket Controls on the television set audio video
53. n in the favourites list is marked with You can enter the same channel in more than one favourite list Each favourite list can store up to 255 chan nels Note m Channels can also be deleted from favour ites lists Select the channel to be deleted with W A or gt and delete it with OK Exiting the settings 1 Press MENU to end the setting INFORMATION Displaying signal information for digital channels only 1 Open the menu with MENU 2 Select the line SOURCE SETUP with w or A and press OK to confirm 3 Select the line Signal Information with V or A and press OK to confirm Information on the channel network modulation symbol rate quality and signal strength is displayed Notes m The signal information changes in accord ance with the current input source m The signal properties are displayed in the lower section of the menu The further the bars for Quality and Signal Strenght extend to the right the better the reception signal m The signal level not only depends on your receiver system but also on the channel which is currently active Remember this when aligning your antenna based upon the signal level display 4 Press MENU to close the menu Service information for retailers Only operate the television with the power supply power cord provided The product complies with the following EU directiv
54. nel A dis play Dual I you can select the audio channel you prefer If the device receives stereo or Nicam pro grammes it switches automatically to stereo sound display Stereox You can switch the sound to Monos if the stereo sound quality is poor 1 Select the line Audio Type with w or A and adjust the setting with or gt Stereo width This broadens the sound output for stereo pro grammes and improves the sound with mono reception 1 Select the line Audio Mode with w or A 2 Select the option Spatial with or gt ENGLISH 19 SETTINGS Soundeffects This menu offers three preset sound effects Music Natural and Speech and one setting to be created by you User 1 Select the line Sound Preset with w or DAK 2 Select the sound effect Music Natural or Speech by pressing or gt Note m User option is active when Sound mode setting is selected as Normal or Spatial SRS TruSurround HD SRS TruSurround HD is a patented audio tech nology which is integrated into the television set and only requires the built in speakers to gener ate a Surround Sound effect 1 Select the line Sound Mode with w or A 2 Select the option SRS TS HD with or gt 3 Select the line SRS Sound Preset with w or A 4 Select the sound effect Music Natural or
55. p with w or A and press OK to confirm The menu appears 4 Select the Optic Out with w or A 5 Select the preferred audio format PCM or Autox with or gt Note m If you wish to output the audio only via a multi channel amplifier AV receiver set the option TV Speaker to Off in the menu 6 Press MENU to end the setting Dolby and the double D logo are trademarks of Dolby Laboratories Manufactured under licence from Dolby Laboratories 40 ENGLISH Playing the audio signal via the HiFi system 1 Connect the sockets on the television to the corresponding socket of the AV receiver with an cable digital audio signal Note m f this function is not activated the audio sig nal is transmitted to the HiFi system AV re ceiver connected to 3 5 mm jack plug into the headphone socket on the left side of the television Open the menu with MENU 2 Select the menu item SOUND SETTINGS with W or A and press OK to confirm The SOUND SETTINGS menu appears 3 Select Audio Output Setup with w or A and press OK to confirm The menu appears 4 Select the line Audio Out with W or A and press or gt to activate the audio output Line Outs 5 Select the line Audio Out Status with w or A and select the option Fixed or Ad justable with or gt
56. r antenna with its own power supply to the an tenna socket ANT IN on the television set or 1b To receive digital cable channels DVB C connect the cable for the rooftop antenna to the antenna socket ANT IN on the television set or lc To receive analogue TV channels connect the cable for the rooftop antenna to the an tenna socket ANT IN on the television set Note m When connecting an indoor antenna you may have to try it out at different positions until you get the best reception 8 ENGLISH 2 Plug the power cord into a wall socket Note m Do not plug in the power cord of the device until you have connected the external equip ment and the antenna m Only use the power cord supplied to connect the television set to a suitable earthed safety socket m Do not use an adapter plug or extension lead which does not meet the applicable safety standards Do not tamper with the power cord CONNECTION AND PREPARATION Inserting batteries into the Environmental note remote control m This symbol on recharge able batteries batteries or on the packaging indi Pb cates that the rechargea ble battery battery may not be disposed of with regular household rubbish For certain rechargeable batteries batteries this sym bol may be supplemented by a chemical symbol Symbols for mercury Hg or lead Pb are provided if the rechargeable batter ies batteries contain more than 0 0005 mercury or more tha
57. re process used to save image data with no or very little losses Picture files can be stored with other types of files on one medium These files can be organised into folders and subfolders USB OPERATION Connecting external data media Before connecting the data medium switch the television to standby using Y Connect the device and then switch the television on again Before removing the external data medium the television set must be switched to standby so that no data loss occurs Notes m If you use a network cable for external hard disks which are connected to the USB socket on the television this network cable must also be disconnected from the power supply when the television is switched off m External data media may not be disconnect ed from the television set while files on the data medium are being accessed m A bidirectional data transfer as defined for ITE Information Technology Equipment devices in EN 55022 EN 55024 is not possible m USB transfer is not in itself an operating mode It is only an additional function Connect the USB socket of the television and the corresponding socket on the data device external hard drive digital camera card reader or MP3 player using a USB ca ble or plug the memory stick into the USB interface USB of the television Confirm the display gt R with ee green The file browser appears ENGLISH 25 USB OPERATION T
58. setting SPECIAL SETTINGS Tuning the television channels by entering the channel numbers 1 Open the menu with MENU 2 Select the line SOURCE SETUP with w or A and press OK to confirm The SOURCE SETUP menu appears 3 Select the line Analogue Manual Tuning with W or A and press OK to confirm The menu appears aN INSTALLATION 2 ANALOGUE MANUAL TUNING Program No 1 TSystem Band Channel Fine Tuning 48 25 MHz 4 Select the line Program Nox by pressing w or A and use or gt to save the preset 5 Select Band by pressing W or A and use or gt to choose between S special channel or C normal channel 6 Selectthe line Channel with W or A and enter the channel number with or gt step by step or use 1 0 to enter it directly Notes m The current system is displayed in the System line If the colour or sound is not functioning properly select the line System with W or A Use or gt to select the preferred setting m f fine tuning is necessary select the line Fine Tuning with w or A and use or gt to make the setting 7 Press eeee blue to save the setting Note m If you wish to remedy other television channels repeat steps 4 to 8 8 Press MENU to end the setting Changing stored analogue channels If c
59. t m Only clean the housing of your television set with the cloth provided Do not use water with soap or detergent m When deciding where to put the device re member that furniture is often coated with vari ous types of varnish and plastic Many of these contain chemicals which can corrode the feet of the device leaving marks on the surface of the furniture which can be difficult or impossi ble to remove mThe screen of your LCD television meets the highest quality standards and has been checked for pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds speci fied by the DIN norm pixel faults of this kind cannot be regarded as a defect as defined by the warranty m To ensure fires do not occur always keep candles and other open flames away from the device SETUP AND SAFETY m Do not connect any other equipment while the device is switched on Also switch off other equipment before connecting it Do not plug in the power cord of the device until you have connected the external equip ment and the antenna m To avoid safety problems arising from the bat teries used with the product follow the instruc tions below m In case of misplacement of batteries they may cause explosion due to short circuit Do not expose the batteries to excessive heat such
60. ter a short while Freeze frame If you wish to view a particular scene for longer you can freeze the frame of the current pro gramme 1 Activate the freeze frame function with Ill 2 End the freeze frame function with Ii Picture settings Various picture settings are available 1 Open the Tools menu with TOOLS 2 Select the menu item Picture Mode with VW or A 3 Select User Eco TV Vivid Natural Moviex Sports or Gamex by pressing or D Note m Picture setting Gamex can only be selected in HDMI Component and PC modes Audio settings Various audio settings are available 1 Open the Tools menu with TOOLS 2 Select the menu item Sound Preset with VW or A 3 Select the audio setting User Music Natural or Speech by pressing or gt Note m User option is active when Sound mode setting is selected as Normal or Spatial ENGLISH 21 TELEVISION OPERATION Audio language Various languages are available on digital tele vision channels This depends on the programme being broadcast 1 Open the selection menu with g2 2 Select the language by pressing W or A and press OK to confirm Subtitles Various subtitles are available on digital televi sion channels This depends on the programme being broadcast 1 Open the selection menu with gt k
61. they feature the right file ending m If a video file features several audio tracks audio streams you can switch these over during playback in full screen mode with m When playing music files you can use other options in the USB mode at the same time This way you can for example enhance a slideshow with music m For films only subtitles in the SRT format are supported The names of the subtitle and film files must be identical Otherwise no subtitles will be shown 28 ENGLISH Additional playback functions Depending on the file format the following additional functions are available Selecting chapters on DivX files only video files 1 During playback select the next chapter with gt 2 During playback select the previous chapter with Note m You can also select chapters by entering the chapter number with 1 0 Selecting titles on DivX files only video files 1 During playback select the next title with DAK 2 During playback select the previous title with w Playing selected titles Only the marked tracks are played 1 Select the titles with w or A and press OK to mark it 2 Select the next title with w or A and press OK to mark it 3 Start playback with D gt 4 Press llll to end playback Note m To remove the marking select the title with V or A and press OK to remove the marking US
62. ting ENGLISH 31 CONVENIENCE FUNCTIONS Setting the date and time Automatic setting Your television set detects the difference in time to Greenwich Mean Time GMT automatically as long as the channel selected transmits a time signal 1 Select the line Time Adjustment with w then select the option Manual with or gt The lines Time Zone and Daylight Sav ing are active 2 Select the line Time Zone with w and press OK to confirm The Select Time Zone menu appears 3 Select the appropriate time zone with gt W or A and press OK to con firm 4 Select the line Daylight Saving with w and use or gt to set the option Autox Off or On 5 Press MENU to finish the setting Manual setting You can also set the difference in time manually for example when the correct time is not de tected automatically or does not correspond to local time for other reasons 1 Select the line Date amp Time with W or A and press OK to confirm 2 Select the line Auto with w or A and press OK to confirm Date and Time will be updated automatically or 3 Select the input box with W or A enter the data for Date and Time with 1 0 and press OK to confirm 32 ENGLISH Timer settings Entering the switch off time sleep timer In the Sleep Timer menu you c
63. to finish the setting Changing the audio language only for digital television channels You can define a primary and a secondary audio language 1 Select the line Audio with W or A and press OK to confirm The Select Audio Language menu appears 2 Select the audio language with gt V or A and then use e red to set it as the primary audio language or use ee green to set it as the secondary audio language The primary and secondary language is display at the top right in the menu 3 Press MENU to end the setting Changing the subtitle language and subtitle mode only for digital television channels You can switch the subtitles on and off select the subtitle language and allocate a second subtitle language 1 Select the line Subtitle with w or A and press OK to confirm The Select Subtitle Language menu ap pears 2 Select the subtitle language with w A or gt then use e red to set it as the primary subtitle language or use ee green to set it as the secondary subti tle language The primary and secondary language is displayed at the top right in the menu 3 To go back one menu level press 4 Select the line Subtitle Mode with w or A and then set the preferred option Off Hard of Hearing or Basic with or gt 5 Press MENUs to end the set
64. ts using the USB sockets Video data Special codecs for video compression and decompression provide more memory space without compromising the picture quality exces sively Your television plays video files in the formats DIVS XVID H 264 MPEG 4 AVC L4 1 4 ref erence pictures MPEG 4 MPEG 2 MPEG 1 MJPEG and MOV The following file name extensions are also sup ported AVI MKV MP4 TS MOV MPG DAT VOB These files can also contain audio files compressed using MP3 AAC or Dolby Digital Audio data Your television can play audio data in the for mats MP3 AAC WMA MP3 is the abbreviation for MPEG 1 Level 3 and is based on the MPEG 1 standard which was developed by the MPEG Motion Picture Expert Group AAC stands for Advanced Audio Coding and was also developed by MPEG AAC provides better sound quality at an identical data rate WMA Windows Media Audio is a compres sion standard for audio data developed by Microsoft These formats allow audio files to be recorded and played which sound as good as a CD while taking up only a fraction of the memory space File name extensions which are supported MP3 MP2 WMA M4A AAC MP3 files can be organised into folders and subfolders as on the computer 24 ENGLISH Image data Your television can display pictures in the formats JPEG PNG and BMP JPEG stands for Joint Picture Experts Group It denotes a process for compressing picture files PNG and BMP a
65. ufficient space between the television set and nearby furniture min 10 cm m The television is designed for use in dry rooms If you do use it outdoors make sure it is pro tected from moisture such as rain or splashing water Never expose the television set to moisture Do not place any vessels such as vases on the television as they may spill liquid thus present ing a safety risk m Place the television on a hard level surface Do not place any objects such as newspapers on the television or put cloth or similar items under it Do not place the television close to heating units or in direct sunlight as this will impair cooling m Heat build up can be dangerous and shortens the service life of the television For reasons of safety have a repairman remove any dirt in the television from time to time m Never open the television under any circum stances Warranty claims are excluded for damage resulting from improper handling a ENGLISH m Make sure the power cord or the power sup ply unit if provided are not damaged m Only operate the television with the power supply power cord provided m Thunderstorms are a danger to all electrical devices Even when the television is switched off it can be damaged by a lightning strike to the mains or the antenna Always disconnect the mains and antenna plugs during a storm m Use a damp soft cloth to clean the screen Do not use water with soap or detergen
66. vider does not support the scan type Quick Note m You can accelerate the search To do this you need information about the frequency and network ID You are usually able to get this data from your cable operator or find it in forums on the Internet 4 Start the scan with ee green The Search Results menu appears and the search for TV channels begins Depending on the number of television channels received this can easily take a few minutes The scan is complete as soon as the PRO GRAM TABLEx appears Note mYou can abort the scan by pressing MENU 5 Press MENUs to end the setting ENGLISH 15 SETTINGS Changing the program table for the digital channels Channels which are found using the scan are saved in the PROGRAM TABLE You can delete channels which are not required from the programe table and lock individual channels Parental control You can also add channels to the favourites list in addition you can change the order of chan nels within the favourites list With ee green you can display the channels which belong to one network Switch to the next page in the programe table with P and to the previous page with P With eee yellow you can open the LIST MANAGEMENT within the programe table In this List Management you can create your own favourites lists INSTALLATION PROGRAM TABLE Das Erste Service 2 ZDF DTV

Grundig LCD TV 46 VLE 6220 BF User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents