Grundig Color Television Elegance 37 LXW 94-8616 Dolby User's Manual
Contents
1. ELEGANCE 37 LXW 94 8616 DOLBY ELEGANCE 40 LXW 102 8616 DOLBY DEUTSCH ENGLISH FRANCAIS ITALIANO NEDERLANDS POLSKI GRUNDIG 20 21 22 23 28 23 26 CONTENTS Set up and safety Connection Preparation Mounting the table base Connecting the loudspeakers Connecting the antenna and the mains cable Inserting batteries in the remote control Overview Connections on the television Controls on the television The remote control Settings Setting television channels automatically Changing stored channels Picture settings Audio settings Television operation Basic functions Zap function Zoom function Changing the picture format PIP mode Teletext mode TOP text or FLOF text mode Normal text mode Additional functions Convenience functions Convenience functions with the Features menu Using external devices DVD player DVD recorder video recorder or set top box Decoder or satellite receiver Hi fi system AV receiver Camcorder PC Monitor Mode Connecting a PC Selecting the channel position for the PC Settings for the PC Special settings Setting television channels Information Technical data Service information for dealers Environmental note Troubleshooting Additional Information for units sold in the UK SET UP AND SAFETY Please note the following information when setting up yo2. ENGLISH 10 gt w O O O O A A Q I O Q vU OD 7 Va j lt D GRUNDIG Tele Pilot 170 C O 696 g OVERVIEW SCAN PAT S P DR DVD AUX Reveals answers in teletext mode Selects the Double Window function Selects the sub pages in teletext mode Updates a page in teletext mode Switches to operation of a GRUNDIG digital receiver GRUNDIG digital receiver with hard disk PDR GRUNDIG DVD player or GRUNDIG DVD recorder Keep the appropriate button DR DVD pressed down Then press the appropriate button Note The DR button has been programmed for operating a GRUNDIG digital receiver remote control level 1 The DVD button has been programmed for operating a GRUNDIG DVD player You can change this programming see AUX button The functions available depend on the model of the device you are using Just try it out Programming the remote control for the operation of external devices Press AUX and hold it down and press three numerical buttons to enter the appropriate code 1 2 3 for a GRUNDIG DVD player 4 5 6 for a GRUNDIG DVD recorder 1 4 7 for a GRUNDIG digital receiver remote control level 1 2 5 8 for a GRUNDIG digital receiver remote control level 2 3 6 9 for a GRUNDIG digital receiver with hard disk PDR SETTINGS Setting televis
3. The ATS menu appears 4 Press lt or gt to select the country 5 Select Autoprogram with P or P and confirm with SOK lt A warning message appears 6 Press green to start the search The search begins It may last a few minutes depending on the number of television stations found The automatic search may last a few minutes depending on the number of television channels received Note You can interrupt the search by pressing OK CE pat INFORMATION Technical data Operating voltage 100 240V 50 60 Hz Power consumption in operation 175 W in standby approx 2 W Elegance 37 in operation 240 W in standby approx 2 W Elegance 40 Sound output 2 x 20 watts music 2 x 10 sine wave Reception range C01 C80 special channels 501 S41 Preset channels 99 and 8 AV Screen size 94 cm 37 Elegance 37 102 cm 40 Elegance 40 Max resolution WXGA 1366 x 768 Weight WEEE approx 32 20 kg Elegance 37 approx 35 20 kg Elegance 40 Service information for dealers The television set may only be operated with the mains adapter sup plied The product complies with the following EU directives 73 23 EEC directive for electrical equipment to be used within defined voltage ranges 89 336 EEC directive on electromagnetic compatibility The device complies with the following standards EN 60065 EN 55013 EN 55020 Environmental note This
4. All of the channels that follow move up one position Note To sort the other television channels repeat steps 1 to 3 Entering the channel names maximum of 5 characters In the Program table menu select the desired channel with P P A or gt lt Highlight the channel with blue Select letters or numbers with P or P move to the next position with lt or P gt and repeat Store the channel name with OK Note To enter additional channel names repeat steps 1 to 4 Skipping television channels You can mark television channels which should be skipped during selection with P or P A selection with the number keys is also possible In the Program table menu select the desired channel with P P A or P Highlight the channel with lt red An S appears behind the name of the television station You can deselect the selected channel by pressing the red button again Concluding the settings Press I to finish the settings SETTINGS Picture settings 1 Press i to open the MAIN MENU Picture TE The MAIN MENU appears cour 2 Select Picture with P or P and confirm with OK The Picture menu appears Hue Sharp 3 Select Default settings with P or P and the setting nay User with lt 4 or gt oe ser Wi or ie Select O
5. 2 Connect the socket PC DVI Audio In on the television to the corresponding socket on the PC using a cinch cable audio signal Note Adjust your PC to the monitor for example picture resolution 1366 x 768 picture frequency 60 Hz Selecting the channel position for the PC I Press AV lt select the PC or DVI channel with P or P and press OK to confirm Settings for the PC 1 Press i to open the MAIN MENU menu The MAIN MENU menu appears 2 Select Picture with P or P and press OK lt to confirm The Picture menu appears 3 Select Brightness with P lt or P and press P lt again The second page of the picture menu appears Picture 4 Press P or P to select the function or setting re Phase Jl Options H Position adjust the horizontal picture position V Position adjust the vertical picture position zoom Phase removes horizontal flicker blurring and horizontal lines To Page 1 nn Select Back Auto position for automatic adjustment to the PC A nd edi xi f se oa 2 5 Press OK to activate the function and lt or gt to adjust O Z Lu Press I to finish the setting N Setup SPECIAL SETTINGS Setting television channels This setting is only necessary if a new channel comes on air and you do not want to change the order of
6. ENGLISH od SETTINGS Dolby Virtual Dolby Virtual is an innovative electronic solution which is integra ted in the television set and only requires the built in speakers to produce Dolby Surround effects 1 Select Sound mode lt with P lt or P 2 Select Dolby Virtual with lt or gt Stereo width Widens the audio output for stereo programmes and improves the sound with mono reception 1 Select Sound type with P or P 2 Press lt or P gt to select the setting Automatic volume The television channels broadcast at different volumes The automa tic volume limiting AVL function means the volume is kept the same when you switch between channels T Select AVL with P or P and then select On with A or gt gt Equaliser The equaliser offers you four preset sound settings Music Sport Cinema and Dialogue and one which you can create yourself User 1 Select Equalizer with P lt or P and confirm with Equalizer 4 OK The Equalizer menu appears 2 Select the audio setting User with P or P and confirm with OK The frequency band 120 Hz is activated 3 Set the desired value with P or P and select the next frequency band with lt or gt Select Back gt LU and edit Ext 4 Press blue to save the setting Concluding the settings
7. Page stop A multiple page may contain several sub pages which are automa tically scrolled by the transmitting station 1 Stop the sub pages with E lt 2 Press E 7 lt to quit the function Calling up a sub page directly If the selected teletext page contains further pages the number of the current sub page as well as the total number of pages is displayed 1 Call up the sub pages with S 2 Press P to scroll back a page 3 Press P lt to scroll to the next page 4 Press S to quit the function Reveal answer Certain teletext pages contain hidden answers or information which can be called up 1 Display information with SCANx 2 Conceal information with SCAN GRUNDIG Tele Pilot 170 C Split screen Split Screen With this function you can see the television channel on the left and the teletext page on the right 1 To activate the split screen function press PAT The television channel and the teletext page appear next to each other on the screen 2 To deactivate the split screen function press PAT ENGLISH ho val 22 Features Off Menu Language AV2 output TV TV 0 Auto Blackline Detect Off ED Select and open Features Off TV TV Sleep timer Auto Blackline Detect Off GD Select 89 and edit Features Off Menu Language AV2 output TV AV output TV Sleep timer 0 Auto Blackline Detect GD Select 89 and
8. L R lt on the televi sion and the corresponding sockets on the hi fi system AV receiver with a cinch cable 2 Connect the yellow AV Out Video socket on the television to the corresponding socket on the AV receiver using a cinch cable video signal ENGLISH N NI USING EXTERNAL DEVICES gt Camcorder Connecting the camcorder 1 Connect the yellow socket AV 3 Video on the television and the corresponding socket on the camcorder VHS Video 8 with a cinch cable picture signal or connect the S VHS socket picture signal on the television and the corresponding socket on the camcorder S VHS Hi 8 with a S Video cable 2 Connect the white and red sockets AV 3 L Rx on the televi sion and the corresponding sockets on the camcorder with a cinch cable audio signal Note There must not be video signals at AV 3 Video and S VHS lt sockets at the same time This could lead to picture disturbances Operating with a camcorder 1 Switch on the camcorder insert a cassette and start playback 2 Press AV select the AV3 or SVHS channel with P lt or P and press OK lt to confirm 28 PC MONITOR MODE Connecting a PC 1 Connect the socket PC IN or DVI D on the television to the corresponding socket on the PC using a VGA cable
9. antenna system Station signal too weak No optical connection Remote control batteries Operating condition unde fined Incorrect setting for picure resolution and picture fre quency on the PC Remedy Is the antenna cable connected Start the station search Adjust the oe contrast or colour setting Test with another channel Change the position of the device Automatic or manual chan nel setting fine tuning Have antenna cable or system checked Turn up the colour Select the correct colour standard Test with another channel Turn up or switch on the volume Test with another channel Test another channel for fine tuning and ghosts Check the antenna system Point the remote control at the television set Check the batteries change if necessary Switch off the television with the main power button for approximately 2 minutes Change the setting on the PC for example picture resolution 1366 x 768 pic ture frequency 60Hz INFORMATION Additional Information for units sold in the UK Units sold in the UK are suitable for operation from a 240V ac 50Hz mains supply The range of multi system receivers is built to work in most European coun tries However the mains plug and socket system for the UK differs from many European countries This appliance has been supplied with a fitted non removable approved converter plug for use in the UK This converter plug
10. device to another by connecting the playback device to the AV 1 socket and the recording device to the AV 2 socket then selecting the AV1 channel However you will not be able to watch a television channel Using the EURO AV socket S Video signal Video signal FBAS Y C Audio signal stereo analogue Preset AV2S 1 Connect the AV 2 socket on the television and the corresponding socket on the external device using a EURO AV cable video and audio signal Features Menu Language AV2 output AV output Sleep timer Auto Blackline Detect GD Select 89 and edit USING EXTERNAL DEVICES With S Video signal Video signal Y C Audio signal stereo analogue Channel position SVHS Connect the S VHS socket on the television and the corre sponding socket on the external device using an S Video cable video signal Connect the AV 3 L R sockets on the television to the corre sponding sockets on the external device using cinch cables audio signal With an analog TV signal Video signal FBAS Audio signal stereo analogue Channel position AV3 Connect the AV 3 Videos cinch socket on the television and the corresponding socket on the external device using cinch cables video signal Connect the AV 3 L R sockets on the television to the corre sponding sockets on the external device using cinch cables audio signal Using a video recorder DVD player
11. is fitted with a 5A rated fuse In case this appliance is supplied with a moulded 2 pin Euro plug only which is unsuitable for UK operation this must be cut off and immediately disposed of An approved 13A 3 pin UK plug should then be fitted by a qualified electrician Note The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket elsewhere If a non rewireable 3 pin plug or a rewireable 13A BS1363 3 pin plug is used it must be fitted with a 5A ASTA or BSI approved BS1362 fuse If any other type of plug is used it must be protected by a 5A fuse either in the plug or at the distribution board If this type of plug becomes defective ensure that the fuse is removed before disposal to eliminate potential shock hazard If it is necessary to change the fuse in the non rewireable plug the correct type and rating 5A ASTA or BSI approved BS1362 must be used and the fuse cover must be refitted If the fuse cover is lost or damaged the lead and plug must not be used until a replacement is obtained Replacement fuse covers should be obtained from your dealer Important The wires in the mains lead are colour coded in accordance with the follo wing code BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of your appliance may not cor respond with the coloured marking identifying terminals in your plug pro ceed as follows Connect the BLUE coloured w
12. or set top box Switch on the video recorder DVD player or set top box and select the function you wish to use Press AV select the input signal channel with P or P AV1 AV2 AV3 SVHS HDMI DVI or YPBPR and press OK lt to confirm Switching VCR mode on and off On certain video recorders you can improve the picture stability of the playback using this mode Press AV lt select the channel with the connected VCR with P or P and press OKx to confirm Call up the MAIN MENU menu with i The MAIN MENU menu appears Select Features with P lt or P and press OK lt to con firm Select VCR mode with P or P and select On with A or gt gt Press i to conclude the setting ENGLISH ho Ui 26 Features VCR mode Off Menu Language AV2 output TV 0 Auto Blackline Detect Off GD Select 9 and edit Q Back Ext USING EXTERNAL DEVICES gt Selecting the signal for the AV output With this setting you can select which signal is output at the Euro AV socket AV1 or at the AV OUT V LR cinch sockets The television station or the video audio signal from connected devices This enables you to transmit recordings from one external device e g a DVD player to another using the television Connect the playback device to Euro AV socket AV1 and the recording device to Euro AV soc
13. Back 4 Select Brightness Contrastx Colour Sharpness or d edit Exit 6 P As oei Qu Noise reduction with P or P and press OK lt to con firm Note The setting Hue only applies to NTSC programmes e g for playback of American television programmes on the video recorder 5 Press lt or P gt lt to select the level and then press OK lt to confirm 6 Press ik to finish the settings Audio settings 1 Press i to open the MAIN MENU The MAIN MENU appears EN 2 Select Sound with P or P and confirm with SOK Normal The Sound menu appears AVL on Volume E gt Select Back 1 Select Volume with P or P and adjust the setting with s and edit Exit A or gt Balance 1 Select Balance with P or P and adjust the setting with A or P lt Stereo two channel mono If the device receives two channel programmes e g a film with the original sound on sound channel B display Dual B and the dubbed version on sound channel A display Dual A you can select the sound channel you desire If the device receives stereo or Nicam programmes it switches automatically to stereo sound display Stereo lt You can switch the sound to Mono if the stereo reception quality is poor 1 Select Sound type with P lt or P and adjust the setting with lt 4 or X gt lt
14. Elegance Oe Operation indicator Red standby Blue operation O a v OQ pr wn D 169 oc GRUNDIG gt w A A lt Q O Tele Pilot 170 C PIP AV P P OK TXT IG OVERVIEW The remote control Switches off the television set stand by Switches the television on from standby mode Selects channels directly Displays the number and name of a station Switches to double character size in teletext mode Switches between picture formats Page stop in teletext mode Shows an inset picture activates the double window function two different TV programmes on separate halves of the screen switches back to normal size Opens the pre selection for AV channels Then selection with P or P Sound on off mute Calls up the Main menu Zap function Switches the television on from standby selects stations step by step moves the cursor in the menus up and down Adjusts the volume moves the cursor left right Calls up the preset channels activates various functions Switches between teletext and TV modes Key has no function Selects various picture settings scrolls back a page in teletext mode Displays the time selects the next page in teletext mode Freeze frame selects the desired chapter in teletext mode Selects various audio settings selects the desired topic in teletext mode
15. I Press i to finish the settings Under license from Dolby Laboratories Licensing Corporation 14 DOLBY and the Double D symbol D0 are registered trademarks of the Dolby Laboratories Licensing Corporation yY g orp Q TUV a O v QRS 3 Q S D Os On 000 O0 Q TAN 0 0 NWO a lt gt gt O O GRUNDIG Tele Pilot 170 C TELEVISION OPERATION Basic functions Switching on and off 1 Press IO on the television set to switch it to standby 2 Press 1 0 or P or P to switch on the device from standby mode 3 Press the button to switch the television to standby mode Press IO on the television set to switch it off completely This saves electricity Selecting channels 1 Use 1 0 to select channels directly 2 Press P or P to move up and down channels 3 Open the channel list by pressing OK select the station with P or P and press OK lt to switch off the channel list Selecting AV channels 1 Call up the Source table menu with AV 2 Select the desired AV channel position with P lt or P and press OK to confirm 3 Switch back to the television channel with 1 0 Adjusting the volume 1 Adjust the volume with lt or P gt lt Muting 1 Use to switch the sound off mute and to switch it on again Displaying time 1 You can display the time by pressing
16. Installation with P or P and confirm with OK Select Program no with P or P and set the preset channel with lt or P gt lt Select Band with P lt or P Press lt or gt to choose between S special channel and C channel Select Channel with P lt or P Press lt or B gt lt to switch up and down channels or use 1 0 to enter the channel number directly Note The current system is automatically displayed in the System line Select System with P lt or P if the colour or sound are incorrect Select the setting required with lt or P gt Select Store with P or P and confirm with OK lt The Stored message appears Note To set the other television stations repeat steps 3 to 9 10 Press i to finish the setting ENGLISH Q wi Setup ATS Installation Program table SD Select Back and open Exit ATS Country United Kingdom Autoprogram GD Select Back g gt and edit Exit lt gt 32 SPECIAL SETTINGS Re tuning all television channels You can re tune all the television stations for example if you move to another town Press i to open the MAIN MENUK 2 Select Setup with P or P and confirm with OK The Setup menu appears 3 Select ATS with P or P and confirm with SOK lt
17. an inset picture from a second picture source in addition to the current channel Other television stations DVD players video recorders or satellite receivers can be used as video sources They must be connected to the input sockets on the back of the device Displaying the inset picture 1 To display the inset picture press PIP once Double window 1 To activate the double window function split screen keep pressing PIP The last selected main and inset pictures are shown next to each other Selecting the channels for the inset picture and the left side of the screen double window 1 Press P or P to move up and down channel positions one ata time Selecting the channels for the main picture and the right side of the screen double window 1 Press 1 0 to select channels directly or select the video source DVD player video recorder SAT receiver then call the Source table menu by pressing AV lt select the desired AV channel position with P or P and press OK to confirm Swapping the main and inset pictures 1 Press Z to swap the main and inset pictures Changing the position of the inset picture 1 Press P to move the inset picture Changing the size of the inset picture 1 Press S to change the size of the inset picture Ending the PIP function 1 To hide the inset picture press PIP twice Quitting the double window 1 To quit the double windo
18. ble digital video and audio signal ENGLISH N Gd USING EXTERNAL DEVICES With a digital audio video signal Video signal digital video resolution standard 576p HDTV 720p 1080i Audio signal stereo analogue Channel position DVI 1 Connect the DVI D socket on the television and the corre sponding DVI socket on the external device using a standard DVI cable digital video and audio signal 2 Connect the PC DVI Audio In socket 3 5 mm jack on the television to the corresponding sockets on the external device with cinch cables audio signal PC DvI JO Audio in With an analogue video signal progressive Video signal YUV resolution standard 576p HDTV 720p 1080i Audio signal stereo analogue Channel position YPBPR 1 Connect the Y Pb Pr sockets on the television and the corre sponding sockets on the external device using cinch cables video signal 2 Connect the Y Pb Pr Audio In L R sockets on the tele vision to the corresponding sockets on the external device using cinch cables audio signal Using the Euro AV socket Video signal FBAS RGB AV 1 FBAS AV 2 Audio signal stereo analogue Channel position AV1 or AV2 1 Connect the AV 1 or AV 2 socket on the television and the corresponding socket on the external device using a EURO AV cable video and audio signal Note You can copy recordings via the television from one external
19. e table base using the hex socket screws supplied 2 Remove four fixing screws for each bracket from the back of the device 3 Place the stand on a level surface Put the device on top of the stand 5 Fasten the stand to the device by screwing four screws to the back of the device for each bracket Connecting the loudspeakers 1 Use the speaker cable supplied to connect the SPEAKER OUT terminals on the device to the INPUT termi nals on each speaker Connect the cables marked in red to the red terminal U ENGLISH VE CONNECTION PREPARATION____ Connecting the antenna and the mains cable 1 Plug the antenna cable of the rooftop antenna into the ANT IN anten na socket on the television 2 Plug the mains cable supplied into the AC IN mains socket of the tele vision 3 Plug the mains cable into the wall socket Note Only plug the device into the mains socket after you have connected the external devices and the antenna Inserting batteries in the remote control 1 Open the battery compartment by removing the lid 2 Insert the batteries Mignon type for example UM 3 or AA 2x1 5V Observe the polarity marked on the base of the battery compartment 3 Close the battery compartment Note If the television no longer reacts properly to remote control commands the bat
20. edit 2 Back Exit Back Ext Q Back Exi CONVENIENCE FUNCTIONS _ Convenience functions with the Features menu 3 To open the MAIN MENUK press i Select Features with P lt or P and confirm with SOK Note Further operation is explained in the following sections Changing the menu language Select Menu Language lt with P or P and confirm with OK The Menu Language menu appears Select the language with P P lt lt or gt and press OKx to confirm Press I to finish the setting Entering the switch off time for the sleep timer 3 You can enter a switch off time After this time has elapsed the tele vision switches to standby mode Select Sleep timer with P or P and press OK lt to confirm To enter the switch off time from 15 to 120 minutes press A or P Press i to conclude the setting Automatic picture format modification Auto Blackline Detect 1 2 3 If this function is activated and a programme with black bars at the top and bottom is showing the picture is enlarged proportionally Select Auto Blackline Detect with P lt or P lt Press lt 4 or P gt lt to activate or deactivate the function Press i to finish the setting USING EXTERNAL DEVICES gt DVD player DVD recorder video recorder or set top box Note Which televis
21. electrical devices Even if the tele vision set is switched off it can be damaged by a lightning strike to the mains or the antenna cable Always disconnect the mains and antenna plugs during a storm Clean the screen with a soft damp cloth Only use plain water Note Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have connected the external devices and the antenna ENGLISH SET UP AND SAFETY Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic most of which contain chemical additives These may cause corrosion to the feet of the device thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove The screen of your LCD television meets the highest quality standards and has been checked for pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds specified by the DIN norm pixel faults of this kind cannot be regarded as a defect as defined by the warranty CONNECTION PREPARATION Mounting the table base Diagrams are contained in the assembly instructions enclosed with the table base 1 Fasten the two brackets to th
22. he picture format is automatically switched to 16 9 for 16 9 programmes For programmes in 4 3 format the picture automatically fills the screen 16 9 and 14 9 formats During programmes in 4 3 format the picture is stretched horizon tally if 16 9 or 14 9 is selected The picture geometry is stretched horizontally With actual 16 9 signal sources from a set top box on the Euro AV socket the picture fills the screen completely and with the correct geometry Letterbox format The letterbox setting is especially suitable for programmes in 16 9 format The black borders which are usually at the top and bottom of the screen are eliminated 4 3 pictures fill the screen The transmitted pictures are enlarged but are slightly cropped at the top and bottom The picture geometry remains unchanged The Auto Letterbox message appears for PAL Plus television programmes Panorama format This setting is suited to films with a large width height ratio During programmes in 4 3 format the picture is stretched horizon tally if the Panorama lt function is selected The picture geometry is stretched horizontally Subtitles format If you cannot read the subtitles which appear on the bottom of the screen especially during programmes with 4 3 format and if the Subtitles format is selected then select Subtitles TELEVISION OPERATION PIP mode PIP picture in picture allows you to watch
23. ing befo re 4 Press I to quit the zap function The display disappears TELEVISION OPERATION Zoom function This function enables you to enlarge the television or PC picture Picture H Position V Position Phase 3 Auto position Zoom To Page 1 Tp Select Back 5 CE and edit Exit lt gt Press I to open the MAIN MENU menu The MAIN MENU menu appears Select Picture with P or P and press OK to confirm The Picture menu appears Select Brightness with P or P and press P again Zoomx is selected Press OKx to activate the zoom function Press P lt or P to change the size of the picture To change the picture section press OK and then A gt P or P to select the section Press I to quit the zoom function The display disappears ENGLISH N Na aN IN pone EZ A JAN D aj JA ja aa E a E ae Ee Dest i aga D NI EE eS ee ee DA ee 18 TELEVISION OPERATION Changing the picture format The television automatically switches to the 16 9 format if this format is detected via the Euro AV socket 1 Select the picture format with E 3 lt The selected picture format for example 16 9 appears on the screen You can choose between the following picture formats 4 3 format The picture is shown in 4 3 format Auto format T
24. ion channels automatically Sprache The television set is equipped with an automatic channel search Portugu s T rk e system Dansk Svenska EMnwk You start the search and can then sort the television channels into Espanol Suomi Hrvatski 7 h your order of preference Francais Cesky Pycckuh ke 5 R _ English Sloven cina Rom na 99 preset positions are provided to which you can assign television Italiano Slovensko Cpncku channels from the antenna or from the cable connection Norsk Magyar Bbnrapckn Dutch Polski 1 Switch on the television with IO lt on the television set then press P lt on the remote control The Sprache Menu language menu appears when the television is first switched on GH Ausw hlen g 0 und best tigen Ende lt gt o Hint If the Sprache Menu language menu does not appear on the screen then set it in accordance with the chapter on reset ting all television channels on page 32 Country Germany Greece Romania 2 Select language with P lt P lt or gt and press RE ene OK to confirm Bulgaria Ireland Spain The Country menu appears Croatia Italy Sweden Czech Luxembourg Switzerland 3 Press P P A or gt to select the country and Denmark Netherlands Turkey OK United Kingtom KONTAN Yugoslavia OK to confirm Finland Poland The search begins It may last a few minutes depending on France Portugal
25. ion socket s you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available Note that with many external devices the resolution of the video signal must be adapted to the input sockets on the television check the external device s instruction manual You can find out which values you need to set by referring to the guidelines in the section about connection options Note Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have connected the external devices High definition HD ready Your television can receive high definition television signals HDTV You can connect the input sources HDTV set top box or HDTV DVD player to the HDMI socket or DVI D digital HDTV signal This ensures that you can view digital HDTV programmes even if they are copy protected HDCP High Definition Copy Protection Connecting a DVD player DVD recorder video recorder or set top box With a digital audio video signal Video signal digital video resolution standard 576p HDTV 720p 1080i Audio signal digital audio stereo multi channel compression uncompressed Channel position HDMI 1 Connect the HDMI socket on the television and the corre sponding HDMI socket on the external device using a standard HDMI ca
26. ire to plug terminal marked with the letter N or coloured black Connect the BROWN coloured wire to the plug terminal marked with the let ter L or coloured red In no circumstance must any of the wires be connected to the terminal mar ked with the letter E earth symbol 7 coloured green or green amp yel low ENGLISH Q Ul Grundig Multimedia B V e Atrium Strawinskylaan 3105 amp NL 1077 ZX Amsterdam http www grundig com
27. ket AV2 and select the setting you require in the Special functions menu AV 2 output TV the television channel that you are viewing or AV3 the audio video signal from the cinch sockets AV3 AV output TV the television channel that you are viewing or AV2 the audio video signal from the Euro AV socket AV2 1 Call up the MAIN MENU menu with i 2 Select Features with P lt or P and press OK to con firm 3 Select AV2 output or AV output with P or P Select the desired option with lt or gt 5 Press i to conclude the setting USING EXTERNAL DEVICES gt Decoder or satellite receiver In order for the television to receive encoded programs from a privately operated station a decoder is needed Connecting a decoder or satellite receiver 1 Connect the AV 1 socket on the television set and the appro priate socket on the decoder using a EURO AV cable Using a decoder or satellite receiver 1 Switch on the television and the decoder or the satellite receiver 2 Press AV select the channel AV1 with P or P and press OKx to confirm Hi fi system AV receiver Connecting the hi fi system AV receiver I Connect the white and red sockets AV Out
28. product has been made from high quality parts and materials which can be re used and recycled Therefore do not throw the product away with normal household waste at the end of its life Take it to a collection point for recycling electrical and electronic devices This is indicated by this symbol on the product in the operating manual and on the packaging Please find out about collection points operated by your local authority Help protect the environment by recycling used products Subject to alteration and correction ENGLISH Go Go 34 INFORMATION Troubleshooting If the remedies given below do not work please consult an authori sed GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satel lite receivers Fault Screen lit snow but no station Poor picture contrast Interference to picture and or sound Ghosts reflection No colour Picture but no sound Teletext missing or faulty Remote control does not work Picture is dark in PC mode Possible cause Antenna cable No television station pro grammed Picture settings incorrectly set Problem at station Interference from other devices Channel setting Antenna Colour intensity at minimum TV standard setting if setting option is available Problem at station Volume set to minimum Problem at station Television station has no teletext or
29. ss I to finish the setting Installation Program no System Channel Band SPECIAL SETTINGS Fine tuning television channels The television automatically tunes itself to the best possible recepti on You may need to carry out manual fine tuning in areas where there is poor reception Fine tuning SD Select 9 and edit Back Exit Setup NES Installation Program table SD Select and open O Back Exit Installation Program no System Band Search Fine tuning Store G amp S Select v9 and edit Back Exit Installation Program no System Channel Band Search Fine tuning Store EG Select 10 and edit a Back Exit 6 Press i to open the MAIN MENU The MAIN MENU appears Select Setup with P or P and confirm with SOK lt The Setup menu appears Select Installation with P or P and confirm with OK Select Fine tuning with P or P and set it with lt or E lt Select Store with P or P and confirm with OK lt The Stored message appears Press ik to finish the setting Setting the television channels by entering the channel numbers Press i to open the MAIN MENU The MAIN MENU appears Select Setup with P or P and confirm with OK The Setup menu appears Select
30. teries may be flat Be sure to remove used batteries The manufacturer accepts no liability for damage re sulting from used batteries Environmental note Batteries including those which contain no heavy metal may not be disposed of with household waste Please dispose of used batteries in an environmentally sound manner Find out about the legal regulations which apply in your area OVERVIEW Connections on the television AV 2 AV 1 ANT IN S VHS AV 3 Video AV 3 L R AV Out Video L R Y Pb Pr Y Pb Pr Audio In L R SPEAKER OUT L R DVI D HDMI PC IN PC DVI Audio In IO Euro AV socket FBAS signal Euro AV socket FBAS signal RGB signal Antenna socket Video signal input for S Video camcorder Video signal input for camcorder Audio signal input for camcorder Audio and video output Video signal input YUV signal Audio signal input YUV signal Terminals for connecting external loudspeakers 2 x 20 W music power 2 x 10 W sine wave impedance 4 Q R right channel L left channel DVI D socket video signal input for PC DVI HDMI socket audio video signal input HDMI VGA socket video signal input for PC Audio signal input for PC Socket for the mains cable Power switch switches the device to and from standby mode N ENGLISH OVERVIEW Controls on the television GRUNDIG
31. the button only for channels with teletext Displaying information 1 Press to display the information The display disappears automatically after a short while Freeze frame If you wish to view a particular scene for longer you can freeze the frame of the current programme 1 Press LLk yellow 2 To quit this function press ULk again ENGLISH Ui 16 TELEVISION OPERATION Picture settings You can select four different picture settings 1 Select the desired picture setting from User Natural Rich or Soft with gt gt lt You can alter the User picture setting see the Picture settings chapter on page 13 Audio settings You can select six different audio settings 1 Select the desired sound setting from User Music Sport Cinemak or Speech with 2 lt You can alter the User sound settings see the Equaliser chapter on page 14 Zap function This function allows you to save the television channel which you are currently watching and switch to other channels zapping 1 Select the channel you want to save in the zap memory with 1 0 or P P e g channel 1 BBC 1 and save by pressing Z The display BBC 1 appears in the screen Change channels with 1 0 or P P You can now use Z to switch between the saved channel in the example BBC1 and the channel you were watch
32. the number of television stations found Select Back Fees 10 ar o Er After the search the television switches to channel position 1 gt and the Program table menu appears Changing stored channels You can delete channels that have been stored more than once during the automatic search You can also store channels in a diffe rent preset position change or enter the name of a channel as well as skip channels Deleting channels Program Table oe ARL oe Wee 1 In the Program table menu select the station to be deleted S with P P A or P re Highlight the channel with LLk yellow Pas Press LLk yellow to delete the channel Note oe SET To delete other stations repeat steps 1 and 3 p Select Move lt gt O Delete i Exit Name ENGLISH SETTINGS Program Table 14 S 22 S ER Skip p Select O Move lt gt Delete i Exit Name Program Table O9 AS 16 S 24 S Gp Skip 4 9 Seleci Move REN O Delete Oo Exit Name Program Table 18 S 13 S 21 S Go Skip d Select Move D gt Delete i Exit Name 12 Sorting television channels In the Program table menu select the channel to be moved with with P P A or gt Highlight the channel with green Select a new channel position by pressing P P lt or gt and then press to confirm
33. ur television set This television set is designed to receive and display video and audio signals Any other use is expressly prohibited The ideal viewing distance is 5 times the screen diagonal External light falling on the screen impairs picture quality To assure sufficient ventilation make sure there is enough space around it in the wall unit The television set is designed for use in dry rooms If you do use it in the open please ensure that it is protected from moisture such as rain or splashing water Do not expose the television set to any moisture Do not place any vessels such as vases on the television as they may spill liquid thus presenting a safety risk Place the television set on a solid level surface Do not place any objects such as newspapers on the television set or cloth or similar items beneath it Do not place the television set close to heating units or in direct sunlight as this will impair cooling Heat build up can be dangerous and shortens the operating life of the television set For reasons of safety have a specialist remove any dirt deposits in the set from time to time Do not open the television set under any circumstances Warranty claims are excluded for damage resulting from improper handling Make sure the power cord or the power supply unit if provided are not damaged The television set may only be operated with the mains cable adapter supplied Thunderstorms are a danger to all
34. w press PIP ENGLISH 20 GRUNDIG Tele Pilot 170 C TELETEXT MODE TOP text or FLOF text mode N GQ UU RO Press TXT to switch to teletext mode You can directly select teletext pages with 1 0 Note At the bottom of the screen you will see an information line consisting of a red green and depending on the station yellow and blue text field Your remote control has buttons with the corresponding colours Press red to scroll back a page Press O green to scroll to the next page Press LLk yellow to select chapters Press 2 blue to select topics Press TXT to switch off teletext mode Normal text mode U A Q N Press TXT to switch to teletext mode You can directly select teletext pages with 1 0 Press P to scroll back a page Press P lt to scroll to the next page Press TXT to switch off teletext mode Additional functions Skipping the waiting time While a page is being searched for you can switch to the television channel 2 Enter the teletext page number using 1 0 and then press P As soon as the page is found the page number is displayed Press P to switch to the teletext page Increasing character size If you have difficulty reading the text on the screen you can double the character size To enlarge the character size of a teletext page press repeatedly TELETEXT MODE
35. your channels The television channel can be set directly or using the search NES Installation Program table 2 89 and edit 1 and edit 30 SD Select O Back Exit 3 and open Installation Program no System 5 Channel Band Search Fine tuning Store ES Select Back Q Exit Installation Program no 6 System Channel Band Search Fine tuning Store ED Back Q Exit Select Setting channels using the search Press i to open the MAIN MENU The MAIN MENU appears Select Setup with P or P and confirm with SOK lt The Setup menu appears Select Installation with P or P and confirm with OK Select Program no with P or P and set the preset channel with lt or P gt lt Select Search with P or P and start the search with A or gt gt If a strong station signal is received the search is interrupted and the picture appears Repeat the search until the channel you want appears on the screen Note The current system is automatically displayed in the System line Select System with P lt or P if the colour or sound are incorrect Select the setting required with lt or P Select Store with P or P and confirm with OK The Stored message appears Note To set other television stations repeat steps 3 to 6 Pre
Download Pdf Manuals
Related Search