Grundig Color Television LXW 68-8720 User's Manual
Contents
1. 3 Select letters or numbers with P lt or P move to the next position with amp or P and repeat 4 Store the channel name with OK Note skip To enter additional channel names repeat steps 1 to 4 j Select Move is Delete n e e Q m Namo Skipping television channels You can mark television channels which should be skipped during selection with P or P A selection with the number keys is also possible 01 ARD S m 1 In the Program table menu select the desired channel with OE P P 4 or Ps 03 BR SHE z 2 Highlight the channel with red 05 SAT 1 An S appears behind the name of the television station You can deselect the selected channel by pressing the red button again 06 PRO7 14 07 BR 08 TELS a a N o o o Concluding the settings 1 Press i to finish the settings ENGLISH Picture Brightness Contrast E Sharp User To Page 2 Select O Back PES 8 and edit Exit SS Volume Balance Sound type Stereo Effect Normal AVL On Headphones up Select O Back q and ec Exit 12 SETTINGS Picture settings 1 Press i to open the MAIN MENU The MAIN MENU appears 2 Select Picture with P lt or P and confirm with OK The Picture menu appears 3 Select Default settings with P or P and the setting2. the audio video signal from the cinch sockets AV3 AV output TV the television channel that you are viewing or AV2 the audio video signal from the Euro AV socket AV2 T Call up the MAIN MENU menu with i 2 Select Features with P or P and press OK to con firm 3 Select AV2 output or AV output with P or P Select the desired option with 4 or gt 5 Press i to conclude the setting Headphones Connecting headphones 1 Plug the headphone jack 3 5 mm jack plug into the head phone socket on the left side of the television Selecting the sound settings for the headphones 1 Press i to open the MAIN MENU 2 Select Sound with P or P and confirm with OK 3 Select Headphones with P or P and confirm with OK 4 Select Volume Balance Bass Treble or Soundtype with P lt or P and set with amp or P 5 Press i to finish the setting USING EXTERNAL DEVICES Decoder or satellite receiver In order for the television to receive encoded programs from a privately operated station a decoder is needed Connecting a decoder or satellite receiver Decoder LERRA PAY TV c3 A J 1 Connect the AV 1 socket on the television set and the appro priate socket on the decoder using a E
3. Have antenna cable or system checked No colour Colour intensity af minimum Turn up the colour TV standard setting if setting option is available Select the correct colour standard Problem at station Test with another channel Picture but no sound Volume set to minimum Turn up or switch on the volume Problem at station Test with another channel Teletext missing or faulty Television station has no teletext or antenna system Test another channel for fine tuning and ghosts Station signal too weak Check the antenna system Remote control does not work No optical connection Point the remote control at the television set Remote control batteries Check the batteries change if necessary Operating condition unde fined Switch off the television with the main power button for approximately 2 minutes Picture is dark in PC mode Incorrect setting for picure resolution and picture fre quency on the PC Change the setting on the PC for example picture resolution 1024x768 pic ture frequency 60Hz Note This is a Class A product During operation the device can cause radio interference In this case the user may have to remedy this Please contact your specialist dealer INFORMATION Additional Information for units sold in fhe UK Units sold in the UK are suitable for operation from a 240V ac 50Hz mains supply The range
4. Any other use is expressly prohibited The ideal viewing distance is 5 times the screen diagonal External light falling on the screen impairs picture quality To assure sufficient ventilation make sure there is enough space around it in the wall unit The television set is designed for use in dry rooms If you do use it in the open please ensure that it is protected from moisture such as rain or splashing water Do not expose the television set to any moisture Do not place any vessels such as vases on the television as they may spill liquid thus presenting a safety risk Place the television set on a solid level surface Do not place any objects such as newspapers on the television set or cloth or similar items beneath it Do not place the television set close to heating units or in direct sunlight as this will impair cooling Heat build up can be dangerous and shortens the operating life of the television set For reasons of safety have a specialist remove any dirt deposits in the set from time to time Do not open the television set under any circumstances Warranty claims are excluded for damage resulting from improper handling Make sure the power cord or the power supply unit if provided are not damaged The television set may only be operated with the mains cable adapter supplied Thunderstorms are a danger to all electrical devices Even if the tele vision set is switched off it can be damaged by a lightning s
5. User with or gt lt 4 Select Brightness Contrast Colour Sharpness or Noise reduction with P or P and press OK to con firm Note The setting Hue only applies to NTSC programmes e g for playback of American television programmes on the video recorder 5 Press lt or P to select the level and then press OK to confirm 6 Press i to finish the settings Audio settings 1 Press i to open the MAIN MENU The MAIN MENU appears 2 Select Sound with P lt or P and confirm with OK The Sound menu appears Volume 1 Select Volume with P or P and adjust the setting with 4 or gt Balance 1 Select Balance with P or P and adjust the setting with 4 or P Stereo two channel mono If the device receives two channel programmes e g a film with the original sound on sound channel B display Dual B and the dubbed version on sound channel A display Dual A you can select the sound channel you desire IF the device receives stereo or Nicam programmes it switches automatically to stereo sound display Stereo You can switch the sound to Mono if the stereo reception quality is poor 1 Select Sound type with P lt or P and adjust the setting with A or P gt lt Egualizer so Select and edit SETTINGS Dol
6. ENGLISH N 22 HD USING EXTERNAL DEVICES DVD player DVD recorder video recorder or set top box Note Which television socket s you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available Note that with many external devices the resolution of the video signal must be adapted to the input sockets on the television check the external device s instruction manual You can find out which values you need to set by referring to the guidelines in the section about connection options Note Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have connected the external devices High definition HD ready Your television can playback high definition television signals HDTV You can connect the input sources HDTV set top box or High Definition DVD player to the HDMI 1 or HDMI 2 socket digital HDTV This ensures that you can view digital HDTV programmes even if they are copy protected HDCP High Bandwidth Digital Content Protection USING EXTERNAL DEVICES Connecting a DVD player DVD recorder video recorder or set top box With a digital audio video signal Video signal digital video resolution standard 576p HDTV 720p 1080 Audio signal digital audio stereo multi channel compression uncompresse
7. Press i to open the MAIN MENU menu The MAIN MENU menu appears Select Picture with P or P and press OK to confirm The Picture menu appears Select Brightness with P or P and press P again Zoom is selected Press OK to activate the zoom function Press P lt or P to change the size of the picture To change the picture section press OK and then amp gt P or P to select the section Press i to quit the zoom function The display disappears TELEVISION OPERATION Changing the picture format The television automatically switches to the 16 9 format if this format is detected via the Euro AV socket 1 Select the picture format with amp 3 The selected picture format for example 16 9 appears on the screen You can choose between the following picture formats 4 3 format The picture is shown in 4 3 format Auto format The picture format is automatically switched to 16 9 for 16 9 programmes For programmes in 4 3 format the picture automatically fills the screen 16 9 and 14 9 formats During programmes in 4 3 format the picture is stretched horizon tally if 16 9 or 14 9 is selected The picture geometry is stretched horizontally With actual 16 9 signal sources from a set top box on the Euro AV socket the picture fills the screen completely and with the cor
8. needed on the television are there on the wall bracket and that they are all used when it is mounted CONNECTION PREPARATION Connecting the antenna and the mains cable mme f N i GR DIC 2 Plug the antenna cable of the rooftop antenna into the ANT IN anten na socket on the television Plug the mains cable supplied into the AC IN mains socket of the tele vision Plug the mains cable into the wall socket Notes Do not plug in the power cord of your device until you have connected the external equipment and the antenna Only connect the television using the power cord supplied to a suitable earthed safety socket Do not use an adapter plug or extension lead which does not meet the applicable safety standards Do not tamper with the power cord Inserting batteries in the remote control 1 2 Open the battery compartment by removing the lid Insert the batteries Mignon type for example UM 3 or AA 2x1 5V Observe the polarity marked on the base of the battery compartment Close the battery compartment Note If the television no longer reacts properly to remote control commands the batteries may be flat Be sure to remove used batteries The manufacturer accepts no liability for damage resulting from used batteries Environmental
9. vd or gt and press off OK to confirm QU Select Back 3 Press i to finish the setting and open Geit Entering the switch off time for the sleep timer You can enter a switch off time After this time has elapsed the tele Features os TCR qu vision switches to standby mode aur 1 Select Sleep timer with P or P and press OK to TV TV confirm Sleep timer Off 2 To enter the switch off time from 15 to 120 minutes press ot Scar seek FD Select Back JP Out 3 Press i to conclude the setting av Child lock If the child lock is activated the buttons on the television are not ES operable Features vcRmode IET TN 1 Select Parental lock with P or P M Av2output AV output T 2 Press lt or P to activate or deactivate the child lock On or Off Parental lock E Pm 3 Press i to conclude the setting ED 8 and edit Ed Automatic picture format modification Auto Blackline Detect If this function is activated and a programme with black bars Features n 7 WoR mods of at the top and bottom is showing the picture is enlarged proportionally TV TV 1 Select Auto Blackline Detect with P lt or P 0 Auto Blackline Detect 2 Press amp or P to activate or deactivate the function Off 3 Press i to finish the setting ED Select Back 8 9 and edit Exit es o
10. 2 We sr x E Press red to scroll back a page 0 Or Press green to scroll to the next page os 0800 Press slk yellow to select chapters Press 2 blue to select topics N QU AO gt Press TXT lt to switch off teletext mode Normal text mode Press TXT to switch to teletext mode O D 00 90 o GRUNDIG Tele Pilot 170 C 00 0 Ov O OF You can directly select teletext pages with 1 0 Press P to scroll back a page Press P to scroll to the next page U BOON Press TXT to switch off teletext mode Additional functions Skipping the waiting time While a page is being searched for you can switch to the television channel 1 Enter the teletext page number using 1 0 and then press P As soon as the page is found the page number is displayed 2 Press P to switch to the teletext page Increasing character size If you have difficulty reading the text on the screen you can double the character size 1 To enlarge the character size of a teletext page press repeatedly ENGLISH 20 gt g E z Z Oz Os pr o 2 o e lt Qs Or f ooo cS O O 00 0 o Q O Tele Pilot 170 C TELETEXT MODE Page stop multiple page may contain several sub pages which are automa tically scrolled by the transmitting station
11. of multi system receivers is built to work in most European coun tries However the mains plug and socket system for the UK differs from many European countries This appliance has been supplied with a fitted non removable approved converter plug for use in the UK This converter plug is fitted with a 5A rated fuse In case this appliance is supplied with a moulded 2 pin Euro plug only which is unsuitable for UK operation this must be cut off and immediately disposed of An approved 13A 3 pin UK plug should then be fitted by a qualified electrician Note The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket elsewhere If a non rewireable 3 pin plug or a rewireable 13A BS1363 3 pin plug is used it must be fitted with a 5A ASTA or BSI approved BS1362 fuse If any other type of plug is used it must be protected by a 5A fuse either in the plug or at the distribution board If this type of plug becomes defective ensure that the fuse is removed before disposal to eliminate potential shock hazard If it is necessary to change the fuse in the non rewireable plug the correct type and rating 5A ASTA or BSI approved BS1362 must be used and the fuse cover must be refitted If the fuse cover is lost or damaged the lead and plug must not be used until a replacement is obtained Replacement fuse covers should be obtained from your dealer Important The wires in the mains lead are
12. or P and confirm with OK The ATS menu appears 4 Press 4 or P gt to select the country Select Autoprogram with P or P and confirm with OK A warning message appears 6 Press green to start the search The search begins It may last a few minutes depending on the number of television stations found The automatic search may last a few minutes depending on the number of television channels received Note You can interrupt the search by pressing OK CE b INFORMATION Technical data Operating voltage 100 240 V 50 60 Hz Power consumption in operation 120 W in standby approx 2 W Lenaro 26 in operation 165 W in standby approx 2 W Lenaro 32 Sound output 2 x 14 watts music 2 x 7 sine wave Lenaro 26 2 x 20 watts music 2 x 10 sine wave Lenaro 32 Reception range CO1 C80 special channels S01 S41 Preset channels 99 and 8 AV Screen size 66 cm 26 Lenaro 26 81 cm 32 Lenaro 32 Max resolution WXGA 1366 x 768 Weight WEEE approx 14 21 kg Lenaro 26 approx 20 91 kg Lenaro 32 Service information for dealers The television set may only be operated with the mains adapter sup plied The product complies with the following EU directives 73 23 EEC directive for electrical equipment to be used within defined voltage ranges 89 336 EEC directive on electromagnetic compatibility The device complies with the following stan
13. search the television switches to channel position 1 lt and the Program table menu appears Changing stored channels You can delete channels that have been stored more than once during the automatic search You can also store channels in a diffe rent preset position change or enter the name of a channel as well as skip channels Deleting channels Program Table T7 5 1 In the Program table menu select the station to be deleted Highlight the channel with IIk yellow Press slk yellow to delete the channel 24 S Note Fa ET To delete other stations repeat steps 1 and 3 g 9 Select Move o Delete Exit Name 10 SETTINGS Sorting television channels 1 In the Program table menu select the channel to be moved Program ane i ith P P 4 or b vili ops ot dore Highlight the channel with SO green oson sto s AE Y green sel ad elect a new channel position by pressing P P amp or sat 13 sjm 8 and OE ME SE TENG an en press io confirm All of the channels that follow move up one position 16 S 24 5 Note pe skp To sort the other television channels repeat steps 1 to 3 q setect E av Delete O Bi Name Entering the channel names maximum of 5 characters 1 In the Program table menu select the desired channel with P P 4 or P Highlight the channel with blue
14. television stations repeat steps 3 to 6 7 Press i to finish the setting p Select Back 10 d edit Exit 1e ande Q Exi 30 Installation Program no 1 BIG SPECIAL SETTINGS Fine tuning television channels The television automatically tunes itself to the best possible recepti on You may need to carry out manual fine tuning in areas where there is poor reception 1 Fine tuning ED Select O Back 8 9 and edit Exit Setup ATS Installation Program table C Select O Back and open Q Exit Installation Program no 1 B G Channel c Store D Select O Back 6 q and edit Exit us 9 Installation Program no System Channel Band Search Fine tuning Store gt Select O Back 10 and edit Q Exit PA 6 Press i to open the MAIN MENU The MAIN MENU appears Select Setup with P or P and confirm with OK The Setup menu appears Select Installation with P or P and confirm with OK Select Fine tuning with P or P and set it with lt or Select Store with P lt or P and confirm with OK The Stored message appears Press i to finish the setting Setting the television channels by entering the channel numbers 1 Press i to open the MAIN MENU The MAIN MENU appears Select Setup with P
15. 1 Stop the sub pages with amp 3 2 Press E 3 to quit the function Calling up a sub page directly If the selected teletext page contains further pages the number of the current sub page as well as the total number of pages is displayed Call up the sub pages with S 2 Press P to scroll back a page 3 Press P lt to scroll to the next page 4 Press S to quit the function Reveal answer Certain teletext pages contain hidden answers or information which can be called up 1 Display information with SCAN 2 Conceal information with SCAN Split screen Split Screen With this function you can see the television channel on the left and the teletext page on the right 1 To activate the split screen function press SPAT The television channel and the teletext page appear next to each other on the screen 2 To deactivate the split screen function press PAT CONVENIENCE FUNCTIONS 0 Convenience functions with the Features menu To open the MAIN MENU press i 2 Select Features with P lt or P and confirm with OK Note Further operation is explained in the following sections Changing the menu language Features VcRmode loi 1 Select Menu Language with P lt or P and confirm with Menu Language OK AV2 output TV The Menu Language menu appears TV Sleep timer 0 ie nae 2 Select the language with P P
16. GRUNDIG made for you COLOR TELEVISION LENARO 26 LXW 68 8720 DOLBY LENARO 32 LXW 82 8720 DOLBY de en fr it Coi CONTENTS Set up and safety Connection Preparation Connecting the antenna and the mains cable Inserting batteries in the remote control Overview Connections on the television Controls on the television The remote control Settings Setting television channels automatically Changing stored channels Picture settings Audio settings Television operation Basic functions Zap function Zoom function Changing the picture format PIP mode Teletext mode TOP text or FLOF text mode Normal text mode Additional functions Convenience functions Convenience functions with the Features menu Using external devices DVD player DVD recorder video recorder or set top box Headphones Decoder or satellite receiver Camcorder Hi fi system AV receiver PC Monitor Mode Connecting a PC Selecting the channel position for the PC Settings for the PC Special settings Setting television channels Information Technical data service information for dealers environmental note Troubleshooting Additional Information for units sold in the UK SET UP AND SAFETY Please note the following information when setting up your television set This television set is designed to receive and display video and audio signals
17. K to activate the function and amp or P to adjust Press i to finish the setting ENGLISH N SPECIAL SETTINGS Setting television channels This setting is only necessary if a new channel comes on air and you do not want to change the order of your channels The television channel can be set directly or using the search Setting channels using the search PEE 1 Press i to open the MAIN MENU SE The MAIN MENU appears 2 Select Setup with P or P and confirm with OK The Setup menu appears ED Select Back 7 X i and open Q ext 3 Select Installation with P or P and confirm with OK 4 Select Program no with P or P and set the preset eget channel with amp or gt i 5 Select Search with P or P and start the search with 4 or P If a strong station signal is received the search is interrupted and the picture appears Repeat the search until the channel you want appears on the screen SEP Select O Back q 9 and edit Ext Note The current system is automatically displayed in the System line Select System with P lt or P if the colour or sound Installation are incorrect Select the setting required with amp or gt Program no p 6 Select Store with P lt or P and confirm with OK The Stored message appears Note To set other
18. URO AV cable Using a decoder or satellite receiver 1 Switch on the television and the decoder or the satellite receiver 2 Press AV select the channel AV1 with P lt or P and press OK to confirm ENGLISH N N USING EXTERNAL DEVICES Camcorder Connecting the camcorder 1 Connect the yellow socket Video on the television and the corresponding socket on the camcorder VHS Video 8 with a cinch cable picture signal or connect the S VHS socket picture signal on the television and the corresponding socket on the camcorder S VHS Hi 8 with a S Video cable 2 Connect the white and red sockets L R on the television and the corresponding sockets on the camcorder with a cinch cable audio signal Note There must not be video signals at Video and S VHS sockets at the same time This could lead to picture disturbances Operating with a camcorder 1 Switch on the camcorder insert a cassette and start playback 2 Press AV select the AV3 or SVHS channel with P lt or P and press OK to confirm Hi fi system AV receiver Connecting the hi fi system AV receiver j 1 Connect the white and red sockets AV OUT L R on the tele vision and the corresponding sockets on the hi fi system AV receiver with a cinch cable 2 C
19. by Virtual Dolby Virtual is an innovative electronic solution which is integra ted in the television set and only requires the built in speakers to produce Dolby Surround effects 1 Select Sound mode with P lt or P 2 Select Dolby Virtual with amp or gt Stereo width Widens the audio output for stereo programmes and improves the sound with mono reception 1 Select Sound type with P or P 2 Press lt or P to select the setting Automatic volume The television channels broadcast at different volumes The automa tic volume limiting AVL function means the volume is kept the same when you switch between channels 1 Select AVL with P or P and then select On with 4 or P Equaliser The equaliser offers you four preset sound settings Music Sport Cinema and Dialogue and one which you can create yourself User 1 Select Equalizer with P or P and confirm with OK The Equalizer menu appears 2 Select the audio setting User with P or P and confirm with OK The frequency band 120 Hz is activated 3 Set the desired value with P or P and select the next frequency band with amp or P 4 Press 2 blue to save the setting Concluding the settings 1 Press i to finish the settings Under license from Dolby Laboratories Licensing Corporation DOLBY and
20. colour coded in accordance with the follo wing code BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of your appliance may not cor respond with the coloured marking identifying terminals in your plug pro ceed as follows Connect the BLUE coloured wire to plug terminal marked with the letter N or coloured black Connect the BROWN coloured wire to the plug terminal marked with the let ter L or coloured red In no circumstance must any of the wires be connected to the terminal mar ked with the letter E earth symbol coloured green or green amp yel low ENGLISH Q Ui Grundig Multimedia B V Atrium Strawinskylaan 3105 e NL 1077 ZX Amsterdam e http www grundig com
21. d Channel position HDMI 1 or HDMI 2 Se i 1 Connect the HDMI 1 or HDMI 2 socket on the television and the corresponding HDMI socket on the external device using a standard HDMI cable digital video and audio signal ENGLISH N Go 24 C0 UNENT VIDEO INPUT USING EXTERNAL DEVICES With an analogue video signal progressive Video signal YUV resolution standard 576p HDTV 720p 1080i Audio signal stereo analogue Channel position YPBPR Vitro OOO Connect the COMPONENT VIDEO INPUT Y Pb Pr sockets on the television and the corresponding sockets on the external device using cinch cables video signal Connect the COMPONENT VIDEO INPUT L AUDIO R sockets on the television to the corresponding sockets on the external device using cinch cables audio signal Using the Euro AV socket Video signal FBAS RGB AV 1 FBAS AV 2 Audio signal stereo analogue Channel position AV1 or AV2 1 Connect the AV 1 or AV 2 socket on the television and the corresponding socket on the external device using a EURO AV coble video and audio signal Note You can copy recordings via the television from one externa
22. dards EN 60065 EN 55013 EN 55020 Environmental note This product has been made from high quality parts and materials which can be re used and recycled Therefore do not throw the product away with normal household waste at the end of its life Take it to a collection point for recycling electrical and electronic devices This is indicated by this symbol on the product in the operating manual and on the packaging Please find out about collection points operated by your local authority Help protect the environment by recycling used products Subject to alteration and correction ENGLISH a 34 INFORMATION Troubleshooting If the remedies given below do not work please consult an authori sed GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satel lite receivers Fault Possible cause Remedy Screen lit snow but no station Antenna cable Is the antenna cable connected No television station pro grammed Start the station search Poor picture contrast Picture settings incorrectly set Adjust the brightness contrast or colour setting Problem at station Test with another channel Interference to picture and or sound Interference from other devices Change the position of the evice Ghosts reflection Channel setting Automatic or manual chan nel setting fine tuning Antenna
23. e the frame of the current programme 1 Press slik yellow 2 To quit this function press slk again TELEVISION OPERATION Picture settings You can select four different picture settings 1 Select the desired picture setting from User Natural Rich or Soft with D You can alter the User picture setting see the Picture settings chapter on page 12 Audio settings You can select six different audio settings 1 Select the desired sound setting from User Music Sport Cinema or Speech with J You can alter the User sound settings see the Equaliser chapter on page 13 Zap function This function allows you to save the television channel which you are currently watching and switch to other channels zapping 1 Select the channel you want to save in the zap memory with 1 0 or P P e g channel 1 BBC 1 and save by pressing Z The display BBC 1 appears in the screen Change channels with 1 0 or P P You can now use Z to switch between the saved channel in the example BBC1 and the channel you were watching befo re 4 Press i to quit the zap function The display disappears ENGLISH c oi 16 Picture Auto position To Page 1 jo Select and edit O Back Q Exit TELEVISION OPERATION Zoom function This function enables you to enlarge the television or PC picture 1
24. ects various audio settings selects the desired topic in teletext mode OVERVIEW SCAN Reveals answers in teletext mode PAT Selects the Double Window function M S Selects the sub pages in teletext mode E P Updates a page in teletext mode DR DVD Switches to operation of a GRUNDIG digital receiver GRUNDIG digital receiver with hard disk PDR GRUNDIG DVD player or GRUNDIG DVD recorder Keep the appropriate button DR DVD pressed down Then press the appropriate button Note The DR button has been programmed for operating a GRUNDIG digital receiver remote control level 1 The DVD button has been programmed for operating a GRUNDIG DVD player You can change this programming see AUX button The functions available depend on the model of the device you are using Just try it out AUX Programming the remote control for the operation of external devices Press AUX and hold it down and press three numerical buttons to enter the appropriate code 1 2 3 for a GRUNDIG DVD player 4 5 6 for a GRUNDIG DVD recorder 1 4 7 for a GRUNDIG digital receiver remote control level 1 2 5 8 for a GRUNDIG digital receiver remote control level 2 3 6 9 for a GRUNDIG digital receiver with hard disk PDR GRUNDIG Tele Pilot 170 C ENGLISH SETTINGS Setting television channels automatically S The television set is equipped
25. is mode 1 Features VCR mode 2 Menu Language AV2 output TV Tv 3 0 of E ED Select Back X and edit Exit an 9 Press AV select the channel with the connected VCR with P or P and press OK to confirm Call up the MAIN MENU menu with i The MAIN MENU menu appears Select Features with P or P and press OK to con firm Select VCR mode with P or P and select On with vd or P Press i to conclude the setting ENGLISH N Ui Features VCR mode Off Menu Language AV2 output AV output TV Sleep timer 0 Auto Blackline Detect Off Parental lock Off ED Select JA and edit Headphones Balance Back Get Sound type Stereo ie 26 Select and edit Back Geit USING EXTERNAL DEVICES Selecting the signal for the AV output With this setting you can select which signal is output at the Euro AV socket AV1 or at the AV OUT V LR cinch sockets The television station or the video audio signal from connected devices This enables you to transmit recordings from one external device e g a DVD player to another using the television Connect the playback device to Euro AV socket AV1 and the recording device to Euro AV socket AV2 and select the setting you require in the Special functions menu AV 2 output TV the television channel that you are viewing or AV3
26. l device to another by connecting the playback device to the AV 1 socket and the recording device to the AV 2 socket then selecting the AV1 channel However you will not be able to watch a television channel USING EXTERNAL DEVICES B With S Video signal Audio signal stereo analogue Channel position SVHS 1 Connect the S VHS socket on the television and the corre sponding socket on the external device using an S Video cable video signal Connect the L R sockets on the television to the correspond ing sockets on the external device using cinch cables audio sig nal With an analog TV signal Audio signal stereo analogue Channel position AV3 1 Connect the Video cinch socket on the television and the corresponding socket on the external device using cinch cables video signal Connect the L R sockets on the television to the correspond ing sockets on the external device using cinch cables audio sig nal Using a video recorder DVD player or set top box 1 Switch on the video recorder DVD player or set top box and select the function you wish to use Press AV select the input signal channel with P or P AV1 AV2 AV3 SVHS HDMI 1 HDMI 2 or YPBPR and press OK to confirm Switching VCR mode on and off On certain video recorders you can improve the picture stability of the playback using th
27. main and inset pictures are shown next to each other Selecting the channels for the inset picture and the left side of the screen double window 1 Press P or P to move up and down channel positions one at a fime Selecting the channels for the main picture and the right side of the screen double window 1 Press 1 0 to select channels directly or select the video source DVD player video recorder SAT receiver then call the Source table menu by pressing AV select the desired AV channel position with P or P and press OK to confirm Swapping the main and inset pictures 1 Press Z to swap the main and inset pictures Changing the position of the inset picture 1 Press P to move the inset picture Changing the size of the inset picture 1 Press S to change the size of the inset picture Ending the PIP function 1 To hide the inset picture press PIP twice Quitting the double window 1 To quit the double window press PIP TELETEXT MODE TOP text or FLOF text mode Press TXT lt to switch to teletext mode N You can directly select teletext pages with 1 0 gt A Og Note At the bottom of the screen you will see an information line consisting of a red green and depending on the station yellow and blue text field Your remote control has buttons with the corresponding colours ES Qe Q e ES 30 jo 2
28. note Batteries including those which contain no heavy metal may not be dis posed of with household waste Please dispose of used batteries in an environmentally sound manner Find out about the legal regulations which apply in your area U ENGLISH OVERVIEW Connections on the television 000 00000 AUDIO L R Y Pb Pr HDMI 2 PC IN PC V L R ANTIN C AV OUT COMPONENT VIDEO INPUT AD AV 2 Euro AV socket FBAS signal AV 1 Euro AV socket FBAS signal RGB signal AVOUT V LR Audio and video output ANT IN Antenna socket COMPONENT VIDEO INPUT AUDIO LR Audio signal input YUV signal Y Pb Pr Video signal input YUV signal HDMI 1 HDMI socket audio video signal input HDMI HDMI 2 HDMI socket audio video signal input HDMI PC IN VGA socket video signal input for PC PC Audio in Audio signal input for PC AC IN Socket for the mains cable OVERVIEW Controls on the television Power switch switches the device to and from standby mode P Switch the television on from standby Channel selection Select a function in the menu TV AV Opens the pre selection for AV channels Select within the menu with P or P amp confirm with Bm MENU Opens the MAIN MENU menu Press P to select an item Press TV AV lt to activate a function Press Bm lt
29. onnect the yellow AV OUT V socket on the television to the corresponding socket on the AV receiver using a cinch cable video signal PC MONITOR MODE Connecting a PC 1 Connect the socket PC IN on the television to the corre sponding socket on the PC using a VGA cable 2 Connect the socket PC Audio in on the television to the cor responding socket on the PC using a cinch cable audio signal Note Adjust your PC to the monitor for example picture resolution 1024x768 picture frequency 60 Hz Selecting the channel position for the PC 1 Press AV select the PC channel with P or P and press OK to confirm Settings for the PC 1 Press i to open the MAIN MENU menu The MAIN MENU menu appears 2 Select Picture with P or P and press OK to confirm The Picture menu appears 3 Select Brightness with P or P and press P again The second page of the picture menu appears Picture 4 Press P or P to select the function or setting Options H Position adjust the horizontal picture position V Position adjust the vertical picture position Zoom Phase removes horizontal flicker blurring and horizontal To Page 1 lines 139 EFF Back Auto position for automatic adjustment to the PC JE ree Orn 5 Press O
30. or P and confirm with OK The Setup menu appears Select Installation with P or P and confirm with OK Select Program no with P or P and set the preset channel with lt or P Select Band with P lt or P Press lt or P to choose between S special channel and C channel Select Channel with P lt or P Press 4 or P to switch up and down channels or use 1 0 to enter the channel number directly Note The current system is automatically displayed in the System line Select System with P or P if the colour or sound are incorrect Select the setting required with amp or gt Select Store with P lt or P and confirm with OK The Stored message appears Note To set the other television stations repeat steps 3 to 9 10 Press i to finish the setting ENGLISH i Setup ATS Installation Program table CX Select Back and open Q Exit ATS Autoprogram ED Select Back f q and edit Exit lt gt 9 32 SPECIAL SETTINGS Re tuning all television channels You can re tune all the television stations for example if you move to another town 1 Press i to open the MAIN MENU 2 Select Setup with P or P and confirm with OK The Setup menu appears 3 Select ATS with P
31. rect geometry Letterbox format The letterbox setting is especially suitable for programmes in 16 9 format The black borders which are usually ot the top and bottom of the screen are eliminated 4 3 pictures fill the screen The transmitted pictures are enlarged but are slightly cropped at the top and bottom The picture geometry remains unchanged The Auto Letterbox message appears for PAL Plus television programmes Panorama format This setting is suited to films with a large width height ratio During programmes in 4 3 format the picture is stretched horizon tally if the Panorama function is selected The picture geometry is stretched horizontally Subtitles format If you cannot read the subtitles which appear on the bottom of the screen especially during programmes with 4 3 format and if the Subtitles format is selected then select Subtitles ENGLISH N TELEVISION OPERATION PIP mode PIP picture in picture allows you to watch an inset picture from a second picture source in addition to the current channel Other television stations DVD players video recorders or satellite receivers can be used as video sources They must be connected to the input sockets on the back of the device Displaying the inset picture 1 To display the inset picture press PIP once Double window 1 To activate the double window function split screen keep pressing PIP The last selected
32. the Double D symbol DI are registered trademarks of the Dolby Laboratories Licensing Corporation ENGLISH e TELEVISION OPERATION Basic functions Switching on and off 1 Press D on the television set to switch it to standby 2 Press 1 0 or P lt or P to switch on the device from standby mode Press the button to switch the television to standby mode Press D on the television set to switch it off completely This saves electricity Selecting channels 1 Use 1 0 to select channels directly 2 Press P lt or P to move up and down channels 3 Open the channel list by pressing OK select the station with P or P and press OK to switch off the channel list Selecting AV channels 1 Call up the Source table menu with AV 2 Select the desired AV channel position with P 4 or P and press OK to confirm 3 Switch back to the television channel with 1 0 GRUnDIG Tele Pilot 170 C Adjusting the volume 1 Adjust the volume with amp or P Muting 1 Use vd amp to switch the sound off mute and to switch it on again Displaying time 1 You can display the time by pressing the O button only for channels with teletext Displaying information 1 Press to display the information The display disappears automatically after a short while Freeze frame If you wish to view a particular scene for longer you can freez
33. to set a function Press MENU to close the menu m Adjust the volume Select menu functions Video Video signal input for camcorder LR Audio signal input for camcorder S VHS Video signal input for S Video camcorder e Headphone connection 3 5 mm jack N ENGLISH GRUNDIG Tele Pilot 170 C OVERVIEW The remote control PIP AV OK TXT TV G 00 Switches off the television set stand by Switches the television on from standby mode Selects channels directly Displays the number and name of a station Switches to double character size in teletext mode Switches between picture formats Page stop in teletext mode Shows an inset picture activates the double window function two different TV programmes on separate halves of the screen switches back to normal size Opens the pre selection for AV channels Then selection with P or P Sound on off mute Calls up the Main menu Zap function Switches the television on from standby selects stations step by step moves the cursor in the menus up and down Adjusts the volume moves the cursor left right Calls up the preset channels activates various functions Switches between teletext and TV modes Key has no function Selects various picture settings scrolls back a page in teletext mode Displays the time selects the next page in teletext mode Freeze frame selects the desired chapter in teletext mode Sel
34. trike to the mains or the antenna cable Always disconnect the mains and antenna plugs during a storm Clean the screen with a soft damp cloth Only use plain water Note Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have connected the external devices and the antenna ENGLISH SET UP AND SAFETY Please note when deciding where to put the device that furniture sur faces are covered by various types of lacquer and plastic most of which contain chemical additives These may cause corrosion to the feet of the device thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove The screen of your LCD television meets the highest quality standards and has been checked for pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds specified by the DIN norm pixel faults of this kind cannot be regarded as a defect as defined by the war ranty Caution If you want to use a wall bracket for your television make sure you read the assembly instructions for the wall bracket carefully or have your spe cialist dealer mount it for you When buying the wall bracket make sure that all the fastening points
35. with an automatic channel search Deutsch WESTERN es system 21 Dansk Svenska Edqvixd You start the search and can then sort the television channels into cupias ae RS your order of preference 7 English Slovenicina Rom na 99 preset positions are provided to which you can assign television Italiano Slovensko Cpncku channels from the antenna or from the cable connection Norsk DIETS ET Bbnrapoku Dutch Polski 1 Espa ol Suomi Hrvatski Switch on the television with O on the television set then press P lt on the remote control The Sprache Menu language menu appears when the television is first switched on ED Ausw hlen qo j und best tigen Ende d 9 Hint If the Sprache Menu language menu does not appear on the screen then set it in accordance with the chapter on reset ting all television channels on page 32 Country Germany Greece Romania 2 Select language with P P lt or gt and press pu are fuis OK to confirm Bulgaria Ireland Spain The Country menu appears Croatia Italy Sweden Czech Luxembourg Switzerland 3 Press Pre P 4 or gt to select the country and Denmark Netherlands Turkey s United Kingtom NIE Yugoslavia OK to confirm n Finland Poland The search begins It may last a few minutes depending on France Portugal the number of television stations found NECS Back du z P 1o EM 9 m After the
Download Pdf Manuals
Related Search