Grundig AMIRA 15 User's Manual
Contents
1. SET UP AND SAFETY Please note the following information when setting up your television set This television set is designed to receive and display video and audio signals Any other use is expressly prohibited The ideal viewing distance is 5 times the screen diagonal External light falling on the screen impairs picture quality Ensure sufficient clearance between the TV and the wall cabinet The television set is designed for use in dry rooms If you do use it in the open please ensure that it is protected from moisture such as rain or splashing water Do not expose the television set to any moisture Do not place any vessels such as vases on the television as they may spill liquid thus presenting a safety risk Place the television set on a solid level surface Do not place any objects such as newspapers on the television set or cloth or similar items beneath it Do not place the television set close to heating units or in direct sunlight as this will impair cooling Heat build up can be dangerous and shortens the operating life of the television set For reasons of safety have a specialist remove any dirt deposits in the set from time to time Do not open the television set under any circumstances Warranty claims are excluded for damage resulting from improper handling Ensure that the mains cable and the mains adapter are not da2. The STORED message appears 6 Press to finish the setting INFO SOUND PICTURE SETUP FEATURES Setting the television channels by entering the channel numbers 1 Press to open the INFO menu The INFO menu appears GRUNDIG GE SELECT er 2 Select SETUP with P or P and confirm with OK LU sees The SETUP menu appears 3 Select MANUAL SETTING with P or P and confirm MANUAL SETTING with SOK lt PROGRAM NO 2 4 Select PROGRAM NOx with P lt or P and set the preset SYSTEM BG channel with lt 4 or gt SEARCH 5 Select CHANNEL with P or P FINE TUNE J ve Press OK to choose between S special channel and C channel GE SELECT Exit 0 ge o 7 Press lt or B to switch up and down channels or use 1 0 to enter the channel number directly Note MANUAL SETHNG The current system is displayed in the SYSTEM line PROGRAM NO AY 8 Select STORE with P or P and confirm with SOK lt CHANNEL The STORED message appears SEARCH Note ees i To set the other television stations repeat steps 3 to 8 9 Press i to finish the setting SELECT exit Ga LU AND EDIT Back 24 SPECIAL SETT NGS SETUP STATION SEARCH MANUAL INSTALL PROGRAM TABLE E gt SELECT Exit 4 AND OPEN lt gt Back COUNTRY SELECTION BE
3. Select MANUAL SETTING with P or P and confirm with SOK lt Select PROGRAM NOx with P lt or P and set the preset channel with lt or gt Select SEARCH with P or P and start the search with zd or gt If a strong station signal is received the search is interrupted and the picture appears Repeat the search until the channel you want appears on the screen Note The current system is automatically displayed in the SYSTEM line Select STORE with P or P and confirm with SOK lt The STORED message appears Note To set other television stations repeat steps 3 to 6 Press to finish the setting ENGLISH N Gi SPECIAL SETT NGS Fine tuning television channels The television automatically tunes itself to the best possible recepti on You may need to carry out manual fine tuning in areas where there is poor reception MANUAL SETTING 1 Press i to open the INFO menu e 5 The INFO menu appears SYSTEM BG CHANNEL C 40 2 Select SETUP with P or P and confirm with OK SEARCH The SETUP menu appears STORE 3 Select MANUAL SETTING with P or P and confirm with SOK lt gt SELECT exit KU ee Back 4 Select FINE TUNE with P or P and set it with lt or SPP lt 5 Select STORE with P or P and confirm with OK
4. may not be disposed of with household waste Please dispose of used batteries in an environmentally sound manner Find out about the legal regulations which apply in your area Adjusting the inclination of the screen 1 Hold the television stand 2 Carefully tilt the screen forward or back OVERVIEW Controls on the television Operation indicator P Switches the television on from standby Channel selection TV AV _ Selects the AV channels and the most recently viewed television channel MENU Opens the INFO menu e Adjusts the volume IO Switches the television into and out of standby mode AV 1 AV 2 DC 12 V Amira 15 17 DC 15 V Amira 20 ANT IN ar PC INPUT AUDIO OUT LR AV 3 LR VIDEO AV 1 Euro AV socket FBAS RGB AV 2 Euro AV FBAS socket Amira 17 20 only ANT IN ir Antenna socket AUDIO OUTL R Audio output AV 3L R VIDEO Audio video input S VHS S VHS video input Q Headphone connection 3 5 mm jack PC INPUT VGA connection for PC DC 12 V Power pack connection socket Amira 15 17 DC 15 V Power pack connection socket Amira 20 N ENGL SH 0 PIP E 1 0 P P OK TXT AV SCAN PAP SIZE POS OVERVIEW The remote control Switches off the television set stand by Key has no function Switches between picture formats Switches to the PC channel position switch
5. and the mains cable Take off the cover A 2 Plug the antenna cable of the rooftop antenna into the ANT IN Or antenna socket on the television 3 Plug the mains cable supplied into the mains socket of the power unit 4 Plug the power pack into the DC 12 V socket Amira 15 and Amira 17 or the DC 15 V socket Amira 20 on the tele vision 5 Plug the power cord plug into an earthed safety socket Note Only connect the television using the power cord supplied to a suitable earthed safety socket Do not use an adapter plug or extension lead which does not meet the applicable safety standards Do not tamper with the power cord Only plug the device into the mains socket after you have connected the external devices and the antenna 6 Puton the cover A U ENGL SH CONNECTION PREPARATION __ __ Inserting batteries in the remote control Open the battery compartment by removing the lid 2 nsert the batteries Mignon type for example UM 3 or AA 2x1 5V Observe the polarity marked on the base of the battery compartment 3 Close the battery compartment Note If the television no longer reacts properly to remote control commands the batteries may be flat Be sure to remove used batteries The manufacturer accepts no liability for damage re sulting from used batteries Environmental note Batteries including those which contain no heavy metal
6. AMIRA 15 LCD 38 6605 BS AMIRA 17 LW 45 6605 BS AMIRA 20 LCD 51 6605 BS DEUTSCH ENGLISH FRANCAIS ITALIANO NEDERLANDS TURKCE POLSKI GRUPIDIG 10 13 10 10 11 12 12 13 14 15 CONTENTS Set up and safety Connection Preparation Connecting the antenna and the mains cable Adjusting the inclination of the screen Overview Operating controls on the television Connections on the television The remote control Settings Setting television channels automatically Changing stored channels Picture settings Audio settings Television operation Basic functions Changing the picture format Zap function Teletext mode TOP text or FLOF text mode Normal text mode Additional functions Convenience functions Convenience functions with the FEATURES menu Using external devices Video recorder DVD player or SET TOP box Decoder or satellite receiver Headphones Camcorder HiFi system Operation as a PC Monitor Connecting a PC Selecting the channel position for the PC Settings for the PC Special settings Setting television channels Information Technical data Service information for dealers Environmental note Troubleshooting Additional Information for units sold in the UK
7. Connect the white and red sockets AV3 LR on the television and the corresponding sockets on the camcorder with a cinch cable audio signal Note If a mono camera is connected connect the white socket AV3 L on the television and the corresponding socket on the camera Select MONO in the SOUND menu for mono operation Operating with a camcorder VHS Video 8 1 2 Switch on the camcorder insert a cassette and start playback Select the AV3 for VHS Video 8 or AVS for S VHS Hi 8 by pressing AV repeatedly until AV3 or AVS lt is displayed on the television You will see the picture and hear the sound of the camcorder on the television HiFi system Connecting the HiFi system Connect the white and red sockets AUDIO OUT L R on the television and the corresponding sockets on the HiFi with a cinch cable ENGLISH N mi PC MENU CLOCK PHASE H POSITION V POSITION AUTO CONFIG Go 9 22 SELECT AND EDIT Exit Back PC MONITOR MODE Note The Amira 20 is not suitable for use with a PC Connecting a PC 1 Connect the WGA socket on the television set and the appro priate socket of the PC using a VGA cable Selecting the channel position for the PC 1 Select the PC channel position with PC settings These settings are only possible w
8. ESTATIGEN gt COUNTRY SELECTION BELGIUM CZECH REP DENMARK FINLAND FRANCE GERMANY GREECE HUNGARY IRELAND ITALY SELECT AND CONFIRM so INFO SOUND PICTURE SETUP FEATURES SELECT AND OPEN to 10 SETTINGS Setting television channels automatically The television set is eguipped with an automatic channel search system You start the search and can then sort the television channels into your order of preference 99 preset positions are provided to which you can assign television channels from the antenna or from the cable connection MAGYAR POLSK T RK E AVAN LI N N CPMCKU SUOMI CESKY ROMANESTE PYCCKUN HRVATSKI BbIITAPUA NETHERLANDS 3 NORWAY POLAND PORTUGAL SPAIN SWEDEN SWITZERLAND 4 TURKEY UK Exit Back Switch on the television with IO on the television set then press P on the remote control The SPRACHE LANGUAGE menu appears when the tele vision is first switched on Hint If the SPRACHE LANGUAGE menu does not appear on the screen then set it in accordance with the chapter on resetting all tele vision channels on page 25 Select language with P P lt or gt and press OK to confirm The COUNTRY SELECTION menu appears Press P P lt or B to select the country and OK to confirm A warning message appears Press OK to start the search The
9. LGIUM NETHERLANDS CZECH REP NORWAY DENMARK POLAND FINLAND PORTUGAL FRANCE SPAIN GERMANY SWEDEN GREECE SWITZERLAND HUNGARY TURKEY IRELAND ITALY gt SELECT Exit C AND CONFIRM lt gt Back Re tuning all television channels You can re tune all the television stations for example if you move to another town Press to open the INFO menu The INFO menu appears Select SETUP with P or P and confirm with OK The SETUP menu appears Select STATION SEARCH with P or P and confirm with SOK lt The COUNTRY SELECTION menu appears Press P P lt d or B to select the country and OK to confirm A warning message appears Press OK to start the search The search begins It may last a few minutes depending on the number of television stations found The automatic search may last a few minutes depending on the number of television channels received Note You can interrupt the search by pressing I ENGLISH N Y 26 CE pi INFORMATION Technical data Operating voltage DC 12 V 4 A with 100 240 V mains adapter 50 60 Hz Amira 15 DC 12 V 5 A with 100 240 V mains adapter 50 60 Hz Amira 17 DC 15V 4 5 A with 100 240 V mains adapter 50 60 Hz Amira 20 Power consumption in operation 36 W Amira 15 in operation 54 W Amira 17 in operation 60 W Amira 20 in standb
10. MER PROGRAM NO 0 ON TIME e OFF TIME SELECT exit Ga g 9 b AND EDIT ean 18 CONVENIENCE FUNCTIONS gt Convenience functions with the FEATURES menu Press to open the INFO menu 2 Select FEATURES with P or P and confirm with SOK lt Note Further operation is explained in the following sections Changing the menu language 1 Select LANGUAGE with P or P and confirm with OK The LANGUAGE menu appears 2 Select the language with P P lt or gt and press OK to confirm 3 Press I to finish the setting Parental lock 1 Select PARENTAL LOCK with P lt or P 2 Press lt or gt to activate the parental lock ON or deactivate it OFF 3 Press i to finish the setting Entering the time 1 Select CLOCK with P or P lt 2 Enter the time in four digits with 1 0 3 Press i to finish the setting Entering the switch on and off times You can set times for the television to switch on and off in the TIMER menu After this time has elapsed the television switches to standby mode or switches on from standby mode Under PROG NUMBER you can enter the TV station with which the tele vision switches on 1 Select TIMER with P or P and press OK to con firm 2 Select PROGRAM NOx ON TIME or OFF TIME with P or P 3 En
11. SETTINGS Deleting channels In the PROGRAM TABLE menu select the station to be dele ted with P P lt q or gt Press LLk yellow to delete the channel Note To delete other stations repeat steps 1 and 2 Sorting television channels In the PROGRAM TABLE menu select the channel to be moved with with P P lt or gt Highlight the channel with lt green Select a new channel position by pressing P P lt or gt and then press to confirm All of the channels that follow move up one position Note To sort the other television channels repeat steps 1 to 3 Entering the channel names maximum of 5 characters In the PROGRAM TABLE menu select the desired channel with P P lt or gt lt Highlight the channel with 9 blue Select letters or numbers with P or P move to the next position with lt or gt and repeat Store the channel name with blue Note To enter additional channel names repeat steps 1 to 4 Skipping television channels You can mark television channels which should be skipped during selection with P or P A selection with the number keys is also possible In the PROGRAM TABLE menu select the desired channel with P P lt or gt Highlight the channel with gt gt lt red The station is now displayed in
12. ber As soon as the page is found the page number is displayed Press POS to switch to the teletext page Increasing character size If you have difficulty reading the text on the screen you can double the character size To enlarge the character size of a teletext page press repeatedly TELETEXT MODE Page stop A multiple page may contain several sub pages which are automa tically scrolled by the transmitting station 1 Stop the sub pages with PAP 5 is displayed instead of the page number 2 Press PAP to quit the function Calling up a sub page directly If the selected teletext page contains further pages the number of the current sub page as well as the total number of pages is displayed 1 Call up the sub pages with SIZE 2 Enter the four digit number of the sub page with 1 0 The selected sub page is appears after a short delay Reveal answer Certain teletext pages contain hidden answers or information which can be called up 1 Display information with SCAN 2 Conceal information with SCAN FEATURES LANGUAGE PARENTAL LOCK OFF CLOCK 10 29 TIMER gt SELECT exit d AND OPEN lt gt Back FEATURES LANGUAGE PARENTAL LOCK CLOCK TIMER gt SELECT exit d AND OPEN lt gt Back FEATURES LANGUAGE PARENTAL LOCK OFF CLOCK 10 29 TIMER gt SELECT exit d AND OPEN lt gt Back TI
13. ective ensure that the fuse is removed before disposal to eliminate potential shock hazard If it is necessary to change the fuse in the non rewireable plug the correct type and rating 5A ASTA or BSI approved BS1362 must be used and the fuse cover must be refitted If the fuse cover is lost or damaged the lead and plug must not be used until a replacement is obtained Replacement fuse covers should be obtained from your dealer Important The wires in the mains lead are colour coded in accordance with the follo wing code BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of your appliance may not cor respond with the coloured marking identifying terminals in your plug pro ceed as follows Connect the BLUE coloured wire to plug terminal marked with the letter N or coloured black Connect the BROWN coloured wire to the plug terminal marked with the let ter L or coloured red In no circumstance must any of the wires be connected to the terminal mar ked with the letter E earth symbol 7h coloured green or green amp yel low Grundig Multimedia B V e Atrium Strawinskylaan 3105 e NL 1077 ZX Amsterdam http www grundig com
14. el Test another channel for fine tuning and ghosts Check the antenna system Point the remote control at the television set Check the batteries change if necessary Switch off the television with the main power button for approximately 2 minutes Switch off the parental lock ENGLISH N NI 28 INFORMATION Additional Information for units sold in the UK Units sold in the UK are suitable for operation from a 240V ac 50Hz mains supply The range of multi system receivers is built to work in most European coun tries However the mains plug and socket system for the UK differs from many European countries This appliance has been supplied with a fitted non removable approved converter plug for use in the UK This converter plug is fitted with a 5A rated fuse In case this appliance is supplied with a moulded 2 pin Euro plug only which is unsuitable for UK operation this must be cut off and immediately disposed of An approved 13A 3 pin UK plug should then be fitted by a qualified electrician Note The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket elsewhere If a non rewireable 3 pin plug or a rewireable 13A BS1363 3 pin plug is used it must be fitted with a 5A ASTA or BSI approved BS1362 fuse If any other type of plug is used it must be protected by a 5A fuse either in the plug or at the distribution board If this type of plug becomes def
15. es to double character size in teletext mode Switches the television on from standby mode selects channels directly Sound on off mute Opens and closes the INFO menu closes all menus Zap function Switches the television on from standby selects stations step by step moves the cursor in the menus up and down Adjusts the volume moves the cursor left right Calls up the preset channels activates various functions Switches between teletext and TV modes Selects the AV channels and the most recently viewed television channel Reveals answers in teletext mode Page stop in teletext mode Selects the sub pages in teletext mode Updates a page in teletext mode OVERVIEW VCR SAT DVD Selects various picture settings scrolls back a page in teletext mode Time on scrolls to the next page in teletext mode Selects the desired chapter in teletext mode Selects various audio settings selects the desired topic in teletext mode Switches to operating a GRUNDIG video recorder a GRUNDIG satellite receiver or a GRUNDIG DVD player Keep the relevant buttons WCR SAT DVD pressed down Then press the button you require Note The functions available to you depend on the model of the device you are using Just try it out SPRACHE DEUTSCH DANSK ESPA OL FRAN AIS ENGLISH ITALIANO NORSK NEDERLANDS PORTUGU S SLOVENSKO SVENSKA lt gt AUSW HLEN 40 UND B
16. g with lt 4 or X gt lt Stereo two channel mono If the device receives two channel programmes e g a film with the original sound on sound channel B display Dual Il lt and the dubbed version on sound channel A display DUAL I you can select the sound channel you desire If the device receives stereo or Nicam programmes it switches automatically to stereo sound display STEREOs You can switch the sound to MONO if the stereo reception quality is poor 1 Select SOUND with P or P and adjust the setting with ya or BK SOUND VOLUME BALANCE SOUND TYPE MONO SETTINGS SOUND MODE NORMAL EQUALIZER ED is SELECT AND EDIT EQUALIZER MUSIC SPORT CINEMA SPEECH USER 1 USER 2 to SELECT AND EDIT ExT Back 120 500 15 5 Hz Hz KHz KHz Exit Back 10 KHz Stereo width Widens the audio output for stereo programmes and improves the sound with mono reception 1 Select SOUND MODE with P lt or P 2 Press lt or gt to select the setting Equaliser The equaliser offers you four pre programmed sound settings Music Sport Cinema and Dialogue and two which you can modify yourself User 1 and User 2 1 Select EGUALIZER with P or P and confirm with OK The EQUALIZER menu appears 2 Select the audio setting USER 1 or USER 2 lt with P or P and confirm wit
17. h SOK lt The frequency band 120 Hz is activated 3 Set the desired value with P or P and select the next frequency band with lt or gt 4 Press OK to save the setting Concluding the settings 1 Press i to finish the settings ENGLISH amp 3 TELEVISION OPERATION Basic functions Switching on and off 1 Switch on the television by pressing the l O button on the television set The device switches to standby mode Switch the television on with 1 0 or P or P 2 Press the button to switch the television to standby mode Press 1 0 or P or P to switch on the device from standby mode 900 0 oO 06000096 3 Completely switch the television off by pressing IO on the television set This saves electricity Selecting channels lt gt lt gt I Use 1 0 to select channels directly 2 Press P or P to move up and down channels 00 0 0 0 6 Selecting AV channel positions 1 Use AV to select AV channels directly 2 Adjusting the volume 1 Adjust the volume with lt or gt lene Muting 1 Use to switch the sound off mute and to switch it on again Displaying time 1 You can display the time by pressing the button only for channels with teletext Picture settings You can select four different picture settings 1 Select
18. hen signals are received from a PC 1 Press i to open the INFO menu The INFO menu appears 2 Select SEARCH TUNE with P or P and press OK to confirm The PC menu appears 3 Select the function or setting you want with P or P and press lt or gt to execute it Options CLOCK Set the cycle frequency PHASE Remove horizontal flicker blurring and horizontal lines H POSITION Adjust the picture position horizontally V POSITION Adjust the picture position vertically AUTO CONFIG For automatic PC configuration 4 Press i to exit the PC menu SPECIAL SETT NGS Setting television channels INFO SOUND PICTURE SETUP FEATURES y a 5 o U gt SELECT exit g AND OPEN gt MANUAL SETTING PROGRAM NO 2 SYSTEM BG CHANNEL C 40 SEARCH cr FINE TUNE 1 STORE SELECT exit GS 1 AND EDIT e MANUAL SETTING PROGRAM NO SYSTEM CHANNEL SEARCH FINE TUNE t STORE SELECT exit Ga io AND EDIT o This setting is only necessary if a new channel comes on air and you do not want to change the order of your channels The television channel can be set directly or using the search Setting channels using the search Press to open the INFO menu The INFO menu appears Select SETUP with P or P and confirm with SOK lt The SETUP menu appears
19. maged The television set may only be operated with the mains cable adapter supplied Thunderstorms are a danger to all electrical devices Even if the tele vision set is switched off it can be damaged by a lightning strike to the mains or the antenna cable Always disconnect the mains and antenna plugs during a storm Clean the screen with a soft damp cloth Only use plain water Note Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have connected the external devices and the antenna ENGLISH SET UP AND SAFETY Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic most of which contain chemical additives These may cause corrosion to the feet of the device thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove The screen of your LCD television meets the highest quality standards and has been checked for pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds specified by the DIN norm pixel faults of this kind cannot be regarded as a defect as defined by the warranty CONNECTION PREPARATION Connecting the antenna
20. n below do not work please consult an authori sed GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satel lite receivers Fault Screen lit snow but no station Poor picture contrast Interference to picture and or sound Ghosts reflection No colour Picture but no sound Teletext missing or faulty Remote control does not work The picture is dark after switching on Possible cause Antenna cable No television station pro grammed Picture settings incorrectly set Problem at station Interference from other devices Channel setting Antenna Colour intensity at minimum TV standard setting if setting option is available Problem at station Volume set to minimum Problem at station Television station has no teletext or antenna system Station signal too weak No optical connection Remote control batteries Operating condition unde fined Parental lock has been activated Remedy Is the antenna cable connected Start the station search Adjust the Ene contrast or colour setting Test with another channel Change the position of the device Automatic or manual chan nel setting fine tuning Have antenna cable or system checked Turn up the colour Select the correct colour standard Test with another channel Turn up or switch on the volume Test with another chann
21. on the television ENGLISH USING EXTERNAL DEVICES Decoder or satellite receiver In order for the television to receive encoded programs from a privately operated station a decoder is needed Connecting a decoder or satellite receiver 1 Connect the AV1 socket on the television set and the appropriate socket on the decoder using a EURO AV cable Notes A satellite receiver can also be connected to this socket If you want to use both a satellite receiver and a decoder the decoder must be connected to the satellite receiver Using a decoder 1 Switch on the television and the decoder 2 Select the AV1 preset channel by pressing AV repeatedly until AV1 appears on the screen Headphones Connecting headphones 1 Insert the headphone jack 3 5 mm jack plug in the headpho ne socket on the bottom Adjusting the headphone volume 1 Press 5Q to mute the television sound 2 Press lt or gt to adjust the headphone volume 20 USING EXTERNAL DEVICES Camcorder Connecting the camcorder Connect the yellow socket AV3 Videos on the television and the corresponding socket on the camcorder VHS Video 8 with a cinch cable picture signal or connect the S VHSx socket picture signal on the television and the corresponding socket on the camcorder S VHS Hi 8 with a cinch cable
22. red You can deselect the selected channel by pressing the red button again Concluding the settings Press I to finish the settings ENGLISH SETTINGS Picture settings PICTURE BRIGHTNESS CONTRAST COLOUR SHARPNESS SMART CONTROL gt SELECT Exit de AND EDIT gt 1 Press i to open the INFO menu The INFO menu appears 2 Select PICTURE with P or P and confirm with SOK The PICTURE menu appears 3 Select BRIGHTNESS CONTRAST COLOUR or SHARPNESS with P or P and adjust them with lt or PPP lt Notes After a short while the PICTURE menu reappears The settings are saved as the USER picture default setting A Press i to finish the settings Audio settings SOUND VOLUME BALANCE SOUND TYPE MONO SOUND MODE NORMAL EGUALIZER TP SELECT Exit 2o AND EDIT lt gt Back 12 1 Press to open the INFO menu The INFO menu appears 2 Select SOUND lt with P or P and confirm with OK The SOUND menu appears Note Further operation is explained in the following sections Volume The standard volume is set here This is the volume of the device after switching on 1 Select VOLUME with P or P and adjust the setting with lt 4 or SP lt Balance 1 Select BALANCE with P or P and adjust the settin
23. search begins It may last a few minutes depending on the number of television stations found After the search the television switches to channel position and the PROGRAM TABLE menu appears Changing stored channels You can delete channels that have been stored more than once during the automatic search You can also store channels in a diffe rent preset position change or enter the name of a channel as well as skip channels Selecting the station list GRUNDIG N Exit Press to open the INFO menu The INFO menu appears Select SETUP with P or P and confirm with SOK lt The SETUP menu appears Select PROGRAM TABLE with P or P and confirm with SOK lt Note Further operation is explained in the following sections PROGRAM TABLE gt SELECT g 9 9 AND OPEN QO EXIT PROGRAM TABLE 1 ARD 2 RIL 3 SAI 4 ZDF 5 PRO7 gt SELECT g Ko 3 AND OPEN QO EXIT PROGRAM TABLE 1 ARD 2 RIL 3 SAI 4 ZDF 5 PRO7 SELECT AND OPEN ED so Pm PROGRAM TABLE 1 ARD 2 RIL 3 SAI 4 ZDF 5 PRO7 gt SELECT 4 5 9 AND OPEN Q EXIT BR3 TELES WDR VOX 10 SRTL skip MOVE DELETE NAME BR3 TELES WDR VOX 10 SRTL skip MOVE DELETE NAME BR3 TELES WDR VOX 10 SRTL skip MOVE DELETE NAME BR3 TELES WDR VOX 10 SRTL skip MOVE DELETE NAME
24. ter the station switch on time or switch off time with 1 0 4 Press i to finish the setting USING EXTERNAL DEVICES Note Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have connected the external devices and the antenna Video recorder DVD player or SET TOP box Connecting the video recorder DVD player or SET TOP box z UN j lt 1 Connect the AV1 or AV2 socket Amira 17 and 20 only on the television and the corresponding socket on the video recorder DVD player or the set top box with a Euro AV Scart cable Using a video recorder DVD player or SET TOP box 1 Switch on the video recorder DVD player or SET TOP box and select the function you wish to use 2 Select AV1 or AV2 Amira 17 and 20 only by pressing AV You can hear and see the video and audio information from the video recorder or the SET TOP box on the television set Connecting the SVHS video recorder If you own a SVHS video recorder you can connect it using a SVHS cable to the S WHS socket Using a SVHS video recorder 1 Switch on the video recorder and select the function you wish to use 2 Select the AVS preset channel with AV You will see the picture and hear the sound of the video recorder
25. the desired picture setting from USER NATURAL RICH or SOFT with lt You can alter the USER picture setting see the Picture settings chapter on page 12 Audio settings You can select six different audio settings I Select the desired sound setting from USER 1 lt USER 2x MUSIC SPORT CINEMA or SPEECH with You can alter the USER 1 lt and USER 2 lt sound settings see the Equaliser chapter on page 13 TELEVISION OPERATION Changing the picture format 1 Select the picture format with E 3 lt You can choose between the following picture formats 4 3 format The picture is shown in 4 3 format AUTO format The picture format is automatically switched to 16 9 for 16 9 programmes For programmes in 4 3 format the picture automatically fills the screen 16 9 format During programmes in 4 3 format the picture is stretched horizon tally if the 16 9 format is selected The picture geometry is stretched horizontally With actual 16 9 signal sources from a SET TOP box on the Euro AV socket the picture fills the screen completely and with the correct geometry Zap function This function allows you to save the television channel which you are currently watching and switch to other channels zapping 1 Select the channel you want to save in the zap memory with 1 0 or P P e g channel 1 BBC 1 and sa
26. ve by pressing Z The display z 1 appears in the screen Change channels with 1 0 or P P You can now use Z to switch between the saved channel in the example BBC1 and the channel you were watching befo re A Press to quit the zap function The display disappears ENGLISH od Y 16 TELETEXT MODE TOP text or FLOF text mode N O UU B OW Press TXT to switch to teletext mode You can directly select teletext pages with 1 0 Note At the bottom of the screen you will see an information line consisting of a red green and depending on the station yellow and blue text field Your remote control has buttons with the corresponding colours Press gt red to scroll back a page Press green to scroll to the next page Press LLk yellow to select chapters Press blue to select topics Press TXT to switch off teletext mode Normal text mode uh Q N Press TXT to switch to teletext mode You can directly select teletext pages with 1 0 Press P to scroll back a page Press P lt to scroll to the next page Press TXT to switch off teletext mode Additional functions Skipping the waiting time While a page is being searched for you can switch to the television channel 2 Enter the teletext page number using 1 0 and then press POS 2J appears instead of the page num
27. y approx 3 5 W Sound output 2 x 3 music power 2 x 2 sine wave Amira 15 2 x 5 music power 2 x 3 sine wave Amira 17 Amira 20 Reception range C01 C80 special channels S01 S41 Preset channels 99 and 5 AV Amira 17 Amira 20 99 and 4 AV Amira 15 Screen size 38 cm 15 Amira 15 43 cm 17 Amira 17 51 cm 20 Amira 20 Max resolution XGA 1024 x 768 Amira 15 WXGA 1280 x 768 Amira 17 VGA 640 x 480 Amira 20 Service information for dealers The television set may only be operated with the mains adapter sup plied The product complies with the following EU directives 73 23 EEC directive for electrical equipment to be used within defined voltage ranges 89 336 EEC directive on electromagnetic compatibility The device complies with the following standards EN 60065 EN 55013 EN 55020 Environmental note This product has been made from high quality parts and materials which can be re used and recycled Therefore do not throw the product away with normal household waste at the end of its life Take it to a collection point for recycling electrical and electronic devices This is indicated by this symbol on the product in the operating manual and on the packaging Please find out about collection points operated by your local authority Help protect the environment by recycling used products Subject to alteration and correction INFORMATION Troubleshooting If the remedies give
Download Pdf Manuals
Related Search