Grundig 4 in 1 multi hair trimmer MT 6740 User's Manual
Contents
1. GRUNDIG made for you 4 IN 1 MULTI HAIR TRIMMER s MT 6740 de en Cr es Le es Ur el DEUTSCH ENGLISH FRANCAIS PORTUGUES ESPANOL POLSKI CESKY TURKCE EAAHNIKA 4 18 30 42 54 66 78 17 29 Al 53 65 77 89 90 101 102 113 SAFETY Please note the following instructions when using the appliance The appliance is designed for domestic use only Observe these instructions in order to prevent damage to the appliance or danger arising from improper use Keep them in a safe place Never use the appliance in the bath shower or over a wash basin filled with water nor should it be operated with wet hands Do not immerse the appliance in water or let it come into contact with water even during cleaning Do not drop the appliance 18 ENGLISH Always disconnect the power supply unit if the appliance is not being charged or used IF not already present for addi tional protection it is recommend to install a residual current oper ated protective device RCD with a rated residual operating current not exceeding 30 mA in the electrical circuit of your bath room Ask your electrician for advice Never use the appliance if it is visibly damaged Keep the appliance away from children Do not open the appliance under any circumstances No warranty claims are accepted for damage caused by incorrect handling OVERVIEW See the illustrations on p2. age 2 Controls Professional cutting head made from industrial ceramic width 38 mm Side catches for removing attachments On off switch up red when charging and green when it is fully charged H Socket for plugging into the charging unit or connecting the power supply unit B Charging unit Accessories Beard trimming attachment width 30 mm Charging display LED Lights E Extendable plug in comb system suitable for both cutting widths with precise trimming grade display for hair lengths of 2 4 6 8 10 12 14 and 16 mm Thinning comb for 2 mm cutting length B Shaving attachment with single blade foil for a smooth shave Power supply unit Other accessories 1 x two combs 1 x cleaning brush 1 oil for cutting head ENGLISH 19 POWER SUPPLY Rechargeable battery operation When operating the appliance with the built in nickel metal hydride battery only use the power unit supplied for charging Check if the mains voltage on the type plate of the power supply unit supplied corresponds to your local mains supply 1 Plug the power cord into the appliance socket i and the power supply unit into the wall socket Notes m Charge up the batteries comp letely before you use them for the first time or if you have not used them for a long time approx 12 hours timer controlled charging The charging display J lights up red when charging and cha
3. ar half of the cutting head using the thinning comb from above and let it click into thinning at a length of 2 mm place 4 After use remove thinning comb by pressing the locking tab at the back If necessary remove the attach ment by pressing in both side catches and lifting off 2 Insert attachment EJ width 38 mm or d width 30 mm carefully at the top and press down until it clicks into place 26 ENGLISH CLEANING AND CARE Cleaning and care 1 Switch off the appliance and unplug it from the mains 2 Remove the attachment and clean the blade head with the brush supplied Caution m If cleaning with the brush is not sufficient you can also rinse the attachment under running water However only do this once the attachment has been removed The cutting head on the attachment does not normally need to be oiled If you clean the attachment under running water regularly but you also want to maintain the original condition of the cutting head for as long as possible it is worth oiling it at regular intervals with the oil provided Use a soft dry cloth or the brush supplied to clean the appliance housing and the charging unit Caution Never put the appliance charging unit or power supply unit in water or any other liquid 4 Before using the appliance again dry all the attachments properly using a soft towel 5 Do not use any cleaning agents Note Remove any clippin
4. as four separate Trimming hair functions using the ceramic cutting head Function 1 precise hair trimming EX width 38 mm at a width of 38 mm Function 2 precise beard trimming at a width of 30 mm Function 3 hair or beard trimming with various cutting lengths 2 4 6 8 10 12 14 a 16 mm at widths of 38 mm or 6 30 Function 4 close shaving 1 If necessary remove the attach ment by pressing in both side Switching on and off catches J and lifting off 1 Press the button 9 to switch on 2 Insert ceramic cutting head 2 the appliance carefully at the top and press down until it clicks into place 2 Press the button d to switch off 3 Place towel around neck the appliance and shoulder of the person whose hair you are trimming 22 ENGLISH OPERATION 4 Make sure the person is seated Function 2 so that their head is roughly at your eye level Before trimming Beard trimming comb the hair so that it falls using the beard trimming attach naturally and you can see the ment d width 30 mm direction in which it grows Qi 1 If necessary remove the attach ment by pressing in both side catches and lifting off 2 Insert beard trimming attachment 9 carefully at the top and press down until it clicks into place 3 Loosen the beard hair comb ing the beard in the direction the hair grows ENGLISH 23 OPERATION Function 3 Trimm
5. gs after each use ENGLISH 27 CLEANING AND CARE Storage If you do not want to use the appli ance for a long period of time please store it carefully 1 Make sure it is unplugged has completely cooled down and all the accessories are completely dry 2 Store the parts in the original box in a cool dry place 3 Make sure the appliance is kept out of reach of children 28 ENGLISH Environmental note This product has been made from high quality parts and materials which can be re used and recycled Therefore do not throw the product away with normal household waste at the end of its service life Take it to a collection point for recycling electrical and electronic devices This is indicated by this symbol on the product in the operating manual and on the packaging Please find out about collection points operated by your local authority Help protect the environment by recycling used products INFORMATION Technical data This product fulfils the European directives 2004 108 EC and 2006 95 EC Power supply Batteries Nickel metal hydride Power supply unit Technical and design modifications reserved ENGLISH 29 Grundig Multimedia Atrium Strawinskylaan 3105 NL 1077 ZX Amsterdam http www grundig com 72011 903 8000
6. ing hair or beards at certain cutting lengths using the extendable attachment nunsl If necessary remove the attach ment by pressing in both side catches and lifting off Insert attachment EY width 38 mm or d width 30 mm carefully at the top and press down until it clicks into place 24 ENGLISH 3 Push the extendable attachment El carefully and firmly onto the rounded rear half of the cutting head from above and let it click into place Adjust the cutting length 2 4 6 8 or 10 mm by pressing on the lock next to the cutting length display and then move the comb to the setting you want After use remove extendable attachment z by pressing the locking tab at the back OPERATION Function 4 Note You can remove the single blade Close shaving foil of the shaving attachment To do this press both side catches on the shaving attachment Clean the blade head with the cleaning brush supplied using the shaving attachment RUNDIG 1 If necessary remove the attach ment by pressing in both side catches J and lifting off 2 Insert shaving attachment E carefully at the top and press down until it clicks into place Note m Do not apply a lot of pressure when shaving as this could damage the single blade foil ENGLISH 25 OPERATION Function 5 3 Push the thinning comb l care fully and firmly onto the rounded Thinning out hair re
7. nges to green when it is fully charged 20 ENGLISH m Charging time is approx 12 hours when the appliance is switched off If you switch on the appliance while it is charging charging will stop charging display disap pears m The ambient temperature should be between 5 C and 40 C m When fully charged the appliance works for around 60 minutes It is not advisable to charge the batteries after every use especially if you do not use the appliance for the full 60 minutes Only charge the batteries when they are completely discharged This increases their service life Do not charge it every day POWER SUPPLY Using the charging unit Put the socket of the appliance into the charging unit 2 Plug the power cord into the socket on the charging unit 3 Plug the power supply unit into the wall socket Mains operation with the power supply unit Check if the mains voltage on the type plate of the power supply unit supplied corresponds to your local mains supply The only way to disconnect the device from the mains is to unplug the power supply unit 1 Plug the power supply unit into the socket on the appliance 2 Plug the power supply unit into the wall socket Caution When in the bathroom or beside a water connection you must only use the appliance in battery mode never run it from the mains ENGLISH 21 OPERATION Special features Function 1 This appliance h
Download Pdf Manuals
Related Search