GPX TE2382B User's Manual
Contents
1. Connecting Other Devices Computer and Optical Audio Output Connecting a Computer You will need a PC with a VGA output and a VGA cable not included 1 Connect the computer s VGA output to the VGA PC Input on the television Power the television on and press the Source button to switch to the PC Mode Audio from the connected PC can be input to the television through the TV s PC Audio Input by using a 3 5mm audio cable not included Using the Optical Audio Output 2828282 You will need a home theater with an Optical Audio Input and a Digital Optical Audio Cable not included al Connect the Digital Optical Audio Cable to the home theater system and the television Adjust the settings on your home theater to play audio from the connected Optical Audio Input Please note home theater systems may label the Optical Audio Input source differently such as PCM or Digital Audio Input Please consult your home theater system s user manual in order to select the correct input source Audio from the television will now be played through the connected home theater system OPTICAL OUT Customer Support 1 888 999 4215 13 Loading Media 1 Load a USB thumb drive into the USB Port as shown in the image to the right Using a USB Thumb Drive 1 Follow the instructions for Connect2. CS GPX USER S GUIDE V 0933 0109 12 TE2382B 23 LED TV For the most up to date version of this User s Guide go to www gpx com Warnings and Precautions CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture AVERTISSEMENT Pour r duire le risque d incendie ou de choc lectrique ne pas exposer cet appareil sous la pluie et l humidit CAUTION Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment WARNING Do not place the unit on top of any soft porous or sensitive surfaces to avoid damaging the surface Use a protective barrier between the unit and surface to protect the surface WARNING Use of this unit near fluorescent lighting may cause interference regarding use of the remote If the unit is displaying erratic behavior move away from any fluorescent lighting as it may be the cause CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type PR CAUTION Danger d explosion si les piles sont remplac es de fa on incorrect Remplacer les piles seuleme
3. buttons to highlight the CHANNEL icon Press the Enter button Press the Arrow v a buttons to highlight SIGNAL TYPE Press the Arrow 4 gt buttons to select AIR Press the Arrow buttons to highlight AUTO CHANNEL SEARCH Press the Enter button to begin scanning for available channels Connecting a Set Top box If your Set Top Box has an HDMI Output Requires a cable connection Connect a cable to the RF Input on the television Press the Source button to switch to TV mode Press the Setup button to access the setup menu Press the Arrow 4 gt buttons to highlight the CHANNEL icon Press the Enter button Press the Arrow v a buttons to highlight SIGNAL TYPE Press the Arrow 4 gt buttons to select CABLE Press the Arrow v buttons to highlight AUTO CHANNEL SEARCH Press the Enter button to begin scanning for available channels Requires a Set Top Box not included Connect the HDMI output on the Set Top Box to the HDMI Input on the television using an HDMI cable not included If your Set Top Box has a Composite Video Output Connect the video output on the Set Top Box to the Composite Video Input on the television using an A V RCA cable not included Connect the audio output on the Set Top Box to the RCA Audio Input on the television If your Set Top Box has a Component Video Output Connect the component video output on the Set Top Box to the Component Video Input on the te
4. USER and DYNAMIC The user mode can be customized by accessing Sound Settings in the menu Mute Press to mute the volume Audio CC Press to adjust the current audio settings In TV mode press to turn closed captioning off or on Setup Press to view the television setup menu Skip Press to skip backward in Media Mode Stop Press to stop in Media Mode Power Press to power the television off or on Number Keypad Freeze Press to freeze or unfreeze the current frame in TV mode Favorites In TV mode press to view your favorites list Guide In TV mode press to view the on screen television guide Channel Press to adjust the television channel Prev In TV mode press to switch to the previous channel Sleep Press repeatedly to set the sleep timer After the set time has expired the television will automatically power off Arrows Enter Press to make selections in the on screen or disc menus Exit Press to exit the current on screen menu Skip Press to skip forward in Media Mode Play Pause Press to play or pause in Media Mode Customer Support 1 888 999 4215 Setup Connecting a TV Antenna Connecting Basic Cable Requires a TV antenna not included Connect a VHF UHF or HDTV antenna to the RF Input on the television Press the Source button to switch to TV mode Press the Setup button to access the setup menu Press the Arrow 4 gt
5. 4215 TE2382B e 23 LED display e Component video input e AC DC power adapter e HDTV supports up to 1080p e USB port supports JPEG MP3 e Remote control requires 2 e 1920 x 1080 native resolution file formats AAA batteries included e Aspect ratio 16 9 e VGA PC video input Stand Brightness 450cd m e RF input e Max color 16 7 million Stereo headphone jack e Contrast 3000 1 e Sleep timer e Response time lt 6 5ms e Full function remote e Viewing angle 176 H 176 V e DC power input requires e ATSC NTSC tuner an AC DC power adapter e Closed captioning included e Electronic program guide V chip e HDMI input e Optical digital audio output Setup Power Remote AC power requires an AC DC power adapter Requires 2 AAA batteries included included C anue Attaching the Stand Use a philips head screwdriver to tighten or remove the screws Using an power drill could damage the TV stand Table of Contents Warnings and Precautions secsec oooi sess pais 6s na TI 50 6 bow ole EEEE E EE also eda blows ersleg E 2 Important Safety INstructlONs sser ee eee REEE RERE a e EEEE EE seers nee ceuemes 3 MEZ3 82 Bier E E e E AE e A A ee EE a e E 4 Features Includes SETUD Eeee e E E A E AEE AE EE AE e eE e EE E A E
6. E E A ea 4 Power Attaching the Stand Remote Table of Contents oee eee eeoa ena EEE Eaa EEE EEEE EE EE A EE e Ee ts E EE EE E a 5 Introduction ee ere e E E E E E E E E EE E S EEEE E EE 6 SQ EU Price cc ckeve ss reor e rero EEEE E S ES EEEE EDES EEEE SEED oie S ovens SERES EE EERE TS 8 Connecting a TV Antenna Connecting a Set Top box Connecting Basic Cable FavoritesandiClock oneei eeo eee ee eeaeee Eae ayecie EEEE E E E EEE EEEE E aea EEEE EE EEEE Ee 9 Adding Favorites Viewing Favorites Setting the Clock Channels so oee eooo ors ose ocevaverete ore avers eE E EE a a EEE EEE EE EEEE sia s ove EE EEEE EE EE E E E E E 10 Auto Scanning for Channels a a E E E E E A A E A E A A O A E R 11 Parental Controls V Chip Connecting Other Devicesc wc seicsun case ccetauienw emo tenten sNasee eens wns ose EE S eo 12 Set Top Box Gaming Device DVD Player Or VCR ccc cece cece cece eee eee eee e eee eeceees 12 Connecting a Set Top Box Connecting a Gaming Device Connecting a DVD Player or VCR Connecting Other Devices s soesseeme sss sonete Enns oeeo erates rd O ersere ais o baie EE leas ofa 13 Computer and Optica AdO Op E E E R 13 Connecting a Computer Using the Optical Audio Output toading Medid isses ecs iecere tres nae E EEEE E EE EE E GEE EE os 50 EEE 14 Connecting a USB Thumb Drive Using a USB Thumb Drive MOUNT NOR e eee e e e e E E E A E E A E E E 15 Mounting the Television Company INformation lt lt 41
7. SETUP TIME and use the Arrow and Enter buttons to manually set the time and date Customer Support 1 888 999 4215 Channels Auto Scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television 1 2 3 4 5 Press the Source button to switch to TV mode Press the Setup button to access the setup menu Press the Arrow 4 gt buttons to highlight the CHANNEL icon Press the Enter button Press the Arrow v buttons to highlight SIGNAL TYPE Press the Arrow 4 gt buttons to select AIR Press the Arrow v buttons to highlight AUTO CHANNEL SEARCH Press the Enter button to begin scanning for available channels Parental Controls Parental Controls V Chip ds 2 3 Press the Source button to switch to TV mode Press the Setup button Press the Arrow 4 gt buttons highlight the PARENTAL CONTROL picture and press the Enter button The default passcode for the parental lock is 0000 Enter the passcode to access the PARENTAL CONTROL preferences From this menu you can lock specific ratings from the United States rating system or the Canadian rating system by accessing the V CHIP settings You can also lock the buttons on the television or lock specific sources from access Customer Support 1 888 999 4215 11 Connecting Other Devices Set Top Box Gaming Device DVD Player or VCR Connecting a Set Top Box SX You will need a
8. caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Special note When placing your unit on a lacquered or natural finish protect your furniture with a cloth or other protective material FCC Warnings WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception wh
9. hock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Important Safety Instructions 1 2 10 11 13 14 Read these Instructions Keep these Instructions Heed all Warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use
10. ich can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Additional Warnings The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus L appareil ne doit pas tre expos aux coulements ou aux claboussures et aucun objet ne contenant de liquide tel qu un vase ne doit tre plac sur l objet Battery shall not be exposed to excessive heat such as sunshine fire or the like Les piles ne doivent pas tre expos es a de forte chaleur tel qu la lumi re du soleil au feu ou autres choses de semblable Caution marking is located at the rear or bottom of the apparatus Attention marquage est situ sur le paneau arri re ou inf rieur de l unit The marking information is located at the rear or bottom of apparatus Le marquage est situ sur le paneau arri re ou inf rieur de l unit This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts Customer Support 1 888 999
11. ing a USB thumb drive 2 Press the Source button to switch to Media mode 3 Use the Arrow and Enter buttons to select and play content from the connected USB thumb drive Mounting e 3 0 3O8O2O8O2O2O8O2O2O502O 80208080 208090 8050905090 8050 208090805090 80908050 Mounting the Television Please consult a professional before attempting to mount the television 3 93 100 mm 3 93 100 mm Tar a e p E vc yv AUDIO ANTENNA Jam VOA PCIN VIDEO HDMI meur AEL L INPUT Customer Support 1 888 999 4215 15 Company Information International Support To download this User s Guide in English Spanish and French or to get answers to frequently asked questions visit the support section at www gpx com Para descargar este Manual del Usuario en ingl s espanol y franc s o para obtener respuestas a preguntas frecuentes visite la secci n de apoyo en WWww gpx com Pour t l charger ce guide de l utilisateur en anglais espagnol ou fran ais ou pour obtenir des r ponses a des questions fr quemment pos es consultez la rubrique d assistance sur www gpx com Contact Information Phone 1 888 999 4215 Email prodinfo gpx com Parts Email partsinfo dpi global com Website www gpx com MADE GRE protect for today sustain for tomorrow Environmen
12. levision using a component RCA cable not included Connect the audio output on the Set Top Box to the RCA Audio Input on the television After connecting your Set Top Box Press the Source button to switch to YPBPR AV or HDMI to match the connection used Favorites and Clock Setting the Clock 1 Press the Source button to switch to TV mode 1 Press the Setup button to access the setup menu 2 Press the Setup button to access the setup menu 2 Press the Arrow 4 gt buttons to highlight the 3 Press the Arrow 4 gt buttons to highlight the SETUP ICON Prest the Enter button CHANNEL icon Press the Enter button 3 Press the Arrow buttons to highlight 4 Press the Arrow v a buttons to highlight the PLOCK Ine Enter Dany CHANNEL SETTING icon Press the Enter button 4 Press the Arrow a buttons to highlight TIME ZONE Press the Arrow 4 gt buttons to select 5 Usethe Arrow 4 gt and Enter buttons to your current time zone select the channel as a favorite 5 Press the Arrow buttons to highlight Waste 7 AUTO CLOCK Press the Arrow 4 gt buttons to Viewing Favorites turn auto clock off and on 1 Press the Source button to switch to TV mode When the correct time zone is set auto clock will 2 Press the Favorites button to view a list of your automatically set your clock and date for you saved favorites 6 To set the time and date manually turn auto clock off highlight
13. nt par le m me type de pile ou l quivalent WARNING Shock hazard Do Not Open AVIS RISQUE DE CHOC LECTRIQUE NE PAS OUVRIR Mains Plug or Direct plug in adapter is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the mains completely the Mains Plug or Direct plug in adapter should be disconnected from the mains socket outlet completely La fiche d alimentation ou adaptateur de courant est utilis comme dispositif de d connexion et doit rester accessible pendant l utilisation Pour mettre l appareil hors tension la fiche ou adaptateur de courant doit tre d branch de la prise de courant Do not mix old and new batteries Do not mix alkaline standard carbon zinc or rechargeable ni cad ni mh etc batteries No mezcle bater as viejas y nuevas No mezcle bater as alcalinas est ndar carbono zinc o recargables ni cad ni mh etc CAUTION WARNING TO REDUCE THE RISK OF eaaa ELECTRIC SHOCK DO NOT REMOVE DO ciao sta COVER OR BACK NO USER ATTENTION SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL RISQUE D ELECTROCUTION NE PAS OUVRIR The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric s
14. s reee ee eene Eee E REEE E EEE E saaees 16 International Support Contact Information Green Initiative Customer Support 1 888 999 4215 Introduction Source Press and use Power Press to power the Arrow Enter buttons Setup Press to view the television setup menu Channel Press to adjust Volume Press to adjust the television off or on to adjust the source the television channel the volume f T SETP SOURCE POWER Te CF e CHANNEL VQLUME T Composite Video Input 1 _ Component Video Input HDMI Input RCA Stereo 2000280808 989893939 250808060 _ 1 Optical Output USB Port PC Audio Input RF Input VGA PC Input Stereo Headphone Jack Source Press and use the Arrow Enter buttons to adjust the source Aspect Press to adjust the aspect ratio between WIDE CINEMA ZOOM and NORMAL Display Press to view the on screen display Picture Press to adjust the picture between STANDARD MOVIE USER and DYNAMIC The user mode can be customized by accessing Picture Settings in the menu Volume Press to adjust the volume Sound Press to adjust the sound between STANDARD SOFT
15. set top box composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable not included k TV UGAibe in VIDEO W AUDIO INPUT HDMI DC IN 12V NO ANTENNA INPUT INPUT oCo 1 Connect the set top box s audio and video outputs to the corresponding audio and video inputs on the television 2 Power the television on and press the Source ES button to switch to the connected input AV composite YPbPr component or HDMI Connecting a Gaming Device You will need a gaming device composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable not included 1 Connect the gaming device s audio and video outputs to the corresponding audio and video inputs on the television Tae 2 Power the television on and press the Source button to switch to the connected input AV composite YPbPr component or HDMI Connecting a DVD Player or VCR WY 8 You will need a DVD player or VCR composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable not included VIDEO W AUDIO INPUT HDMI DCIN 12V 1 Connect the DVD player or VCR s audio and video outputs to the corresponding audio and video gm inputs on the television 2 Power the television on and press the Source button to switch to the connected input AV composite YPbPr component or HDMI
16. tal Commitment to Protect for Today and Sustain for Tomorrow On acontinual basis DPI Inc is making efforts to sustain the environment and improve the recyclability of its products and packaging Focusing on protecting for today and sustaining for tomorrow DPI Inc has committed to reducing packaging size increasing the usage of recyclable plastics and ensuring that packaging and manuals are made with up to 85 recycled material In addition to material consideration DPI Inc has also focused on the finer details that positively impact the environment such as employing the usage of soy based inks DPI Inc also ensures that the factories that produce the company s wide variety of consumer electronics adhere to environmentally friendly air and water restrictions This is yet another example that every step of the way DPI Inc is making efforts to lessen any impact on the environment In 2011 DPI Inc also began conversations with Energy Star in order to ensure that the consumer electronics being produced meet high standards of energy efficiency The ultimate goal is keeping energy costs for consumers low while providing quality feature rich products Copyright 2011 Digital Products International DPI Inc All other trademarks appearing herein are the property of their respective owners Specifications are subject to change without notice
Download Pdf Manuals
Related Search