GE WPRE8150KWT User's Manual
Contents
1. Avoid a Use clamps and screws for drain r hose installation without them leaks and flooding may occur Repair 7 Level your washer and plug it in A ENN p lt a F Zp wW Ser lA PA N P l oe Tilt washer Level forward 4 to 6 frontlegs inches and left to right then set it back down rear legs will self align Avoid a Ensure washer is properly wr leveled otherwise damage WILL occur Repair Avoid a Ensure that washer is powered Sr by 115V 15 or 20 amp wall receptacle Repair hoses to back of washer Install washers Washers should be brand new Replace them if they are old or worn Use pliers to tighten 1 2 turn beyond hand tight Avoida EEEE A hoses and do not forget to install the washers Flooding may occur Repair 8 Installation complete Congratulations Your installation is successful and complete Refer to your Owner s Manual for operation instructions Check for leaks after you turn on the water Repair2. Installation Instruction Quick Reference Guide peie ia vuelta para instrucciones en espa ol For the complete and detailed installation instructions as well as all safety concerns and warnings please refer to the installation instructions manual 1 Unpack your washer 2 Remove metal rod from 3 Install drain hose to the 4 Connect water supply Circles or ovals are color matched between pictures to help show location on product Tools you will need gt Phillips Head Slip Joint Level Screwdriver or 1 4 Pliers Nut Driver Styrofoam block amp owner s manual Fill hoses and parts bag Drain hose 5 Connect water supply hoses to wall faucets Install screens Screens should be brand new Replace them if they are old or worn Use pliers to tighten 1 2 turn beyond hand tight Avoid a Install screen washers without Sr them debris will clog the valve and flooding will occur Repair Do not mix hot and cold water supplies Mixing them will result in poor wash perfomance Repair Avoid a bottom right Remove rod by pulling on yellow plastic handle wr in place WILL result in severe damage to the washer Repair 6 Connect drain hose to drain opening Use cable tie Meet 30 drain hose height requirement Less than 30 without U clip WILL NOT allow Repair proper washer operation Remove metal rod Leaving rod back of the washer
Download Pdf Manuals
Related Search