GE Level Crossing Installation Guide
Contents
1. GE Lighting Solutions Installation Instructions RG6 Pixelated LED Signals 12 300mm Railway Grade Crossing Impact Test Resistance Lenses ror BEFORE YOU BEGIN pare a e a Read these instructions completely and carefully W t Dorn WARNING AVERTISSEMENT e Follow all National Electric Codes NEC and local codes Risk of Electric Shock Disconnect Before Servicing or installing product Risque de choc lectrique Couper l alimentation avant le d pannage ou avant l installation du produit Operating Specifications Nominal Input Voltage 10 V AC DC Voltage Range 8 to 14 V AC DC Nominal Power Consumption 8 4W DC 10 7W AC e Always use a sun shielding apparatus such as a visor or hood over the signals e Donot attempt to open the LED module No assembly is required e Performance and behavior of the lamp including sidelights is guaranteed only when operated in the voltage range stated above Visor Hood Testing When testing the lamp before installation first check the electrical characteristics on the label on the back of the lamp see box B below to avoid damaging the lamp Installation Steps NOTE Failure to properly follow these instructions may cause signal to malfunction Remove the incandescent bulb reflector and lens assembly from the housing Feed wires of the LED signal module through the conduit in the housing Insert the LED signal into the lens slot and rotate it unt2. il the arrow on the back of the module A is aligned with the top of the housing 4 Lock the LED signal module in place by tightening metal tabs over the rim of the module or fastening a ring holder over the module as applicable 5 Connect the wires to the AAR terminals Ensure arrow ff points upward for proper beam alignment A Risk of Electric Shock Install unit in enclosure tested to be suitable for wet locations B Check label for required only voltage This product is intended solely for the use of rail signaling and is not intended for use in any other applications GE Lighting Solutions e 1 888 MY GE LED e www gelightingsolutions com 1 888 69 45 535 GE Lighting Solutions LLC is a subsidiary of the General Electric Company The GE brand and logo are trademarks of the General Electric Company 2013 GE Lighting Solutions LLC Information provided is subject to change without notice All values are design or typical values when measured under laboratory conditions RAIL251 R130816
Download Pdf Manuals
Related Search