GE EDV Specification Sheet
Contents
1. specify ballast The plug in type ignitor for HPS only and ballast shall be prewired to the lamp socket requiring connection of power supply leads only The ballast shall be in full compliance with lamp ballast speci fications available to the fixture manufacturer from the lamp manufacturers at the time of fixture manufacture The ballast shall reliably start and operate the lamp in ambi ent temperatures down to 20 F for mercury or metal halide or 40 F for HPS The luminaire and ballast shall be from the same manufacturer O D gt AREA LIGHTING ii if Figure 1A Figure 1B Figure 1C Traditional Colonial Traditional Prismatic Prismatic Standard OPTICAL ASSEMBLY The optical assembly shall have a one piece impact resistant UV stabilized for color clarity formed polycarbonate globe The standard mogul base E39 socket with superior lamp gripping The socket shall have added insulation giving it the ability to handle the higher pulse ratings of newer HID systems For globe types A and B Traditional and Colonial there shall be prismatic tiered refractors integral to the globe providing reduced glare with improved light utilization REFER TO PRODUCT PAGE FOR BALLAST SELECTIONS FOR MORE DEFINITIVE INFORMATION REFER TO BALLAST SPECIFICATIONS IN TECHNICAL DATA SECTION Guide Form Specifications 2011 GE Lighting Solutions e 1 888 MY GE LED e www gelightingsolutions com 1 882. 8 69 43 533 GE Lighting Solutions is a subsidiary of the General Electric Company Evolve and other trademarks belong to GE Lighting Solutions The GE brand and logo are trademarks of the General Electric Company 2011 GE Lighting Solutions Information provided is subject to change without notice All values are design or typical values when measured under laboratory conditions
3. GE Lighting Solutions GUIDE FORM SPECIFICATIONS GE EDISON V LUMINAIRE GENERAL DESCRIPTION The traditional decorative post top luminaire designated identify shall be a GE EDISON V luminaire order ing number specify EDVX or EDVF plus ordering number logic from catalog or approved equal to operate one specify 50 70 100 or 150 55V watt high pressure sodium HPS or 70 100 175 watt metal halide lamp from a nominal specify 120 208 240 277 or 347 volt 60 Hertz power source and shall be capable of starting and operating the specified lamp within the limits specified by the lamp manufacturer The luminaire shall contain a completely prewired integral ballast and a UV stabilized polycarbonate resin or acrylic globe that shall provide an IES Distribution Type specify from Photometric Selection Guide in catalog The luminaire shall be UL cUL 1598 Listed SUITABLE FOR WET LOCATIONS Standard construction is IP54 MECHANICAL CONSTRUCTION The luminaire shall include a polycarbonate globe impact re sistant at 40 C socket ballast and ornamental black painted textured heavy gauge cast aluminum fitter to fit a 3 1 2 inch 89 mm maximum diameter pole An internal twist lock photoelectric control receptacle mounted in a removable cast aluminum door is available The luminaire shall include a removable ballast can which con tains ballast capacitor and starting aid HPS BALLAST OPERATION The luminaire shall have a
Download Pdf Manuals
Related Search