GBC 250T User's Manual
Contents
1. E 250T THERM A BIND Operating Instructions 250T SET UP la Remove 4 book supports from storage compartment 1b Insert support 1 firmly in front slot Firmly insert remain ing supports in consecutive numerical order 4a Fan and jog paper to insure that all edges are even 4b Before inserting pages into binder square the spine along the 2 inside score lines 2a Plug in and switch on 250T The yellow wait light will illuminate 2b In about 4 minutes a beep will sound and the green light will iluminate At this time the 250T is ready for binding 5 Holding sheets firmly insert fully into cover until they are all directly and evenly seated against the spine adhesive BOOK PREPARATION 3 Firmly hold sheets to be bound and place binding edge on lined surface The first horizontal line above the paper will indicate the cover size to use 6 Holding the book loosely firmly tap spine two or three times against hard surface This will ensure that all sheet are in contact with spine adhesive 250T OPERATION 7b For Copy Bind Covers 8 Depress Bind button 7a For Therm A Bind Covers Insert only one book into Yellow Wait light will Insert one or several books Copy Bind slot Be sure illuminate After 40 seconds total thickness less then 25mm entire spine is resting all the a BEEP will sound and the or 1 inch into front Therm way into grooved heat surface green ready light will illumin2. ate A Bind slot Be sure entire Immediately ermove book s from spine is in complete contact with 250T heat surface 9 Hold the finished book with 10 Place the finished book s into 11 You may continue to bind one hand with other hand the rear cooling slot Allow 5 additional books during the cooling pinch one end of binding edge minutes for proper cooling period Switch off the 250T when you and run fingers along binding have finished binding all your books edge to ensure that sheets are securely bound CAUTION Binding edge will be warm to the touch
Download Pdf Manuals
Related Search