Home

Fujitsu T4310 User's Manual

Contents

1. 38 Fujitsu Technology Solutions Working with the notebook Setting the pen Operating system Mew SCS Windows XP You can access the various pen settings for instance the pressure sensitivity under Fujitsu Pen Settings or Tablet and Pen Settings in the Control Panel Windows Vista You can access the various pen settings under Start Settings Control Panel Mobile PC Pen and Input Device or Tablet PC Settings in the Control Panel Windows 7 Under Hardware and Sound Pen and Input Devices in the Control Panel you can change various settings for the pen assignment and function of the rocker button Calibrating the pen Before using the pen for the first time you should calibrate it so that the cursor follows the movements of the pen as accurately as possible You should also always repeat the calibration if the co ordination between the pen and cursor movement deteriorates Please note There are separate calibration programs available for calibrating the stylus pen and for calibrating finger based operation In each case use the calibration tool described in the supplementary sheet Do not use the calibration tool for the stylus pen to calibrate finger based operation Operating system Mew OOOO O SOS Windows XP To calibrate run the Tablet and Pen Settings function in the Control Panel You need to calibrate both portrait and landscape formats Windows Vista To calibrate run the Tablet PC Settings function
2. Protect your data carriers against dust mechanical vibrations and direct sunlight Avoid storing a data carrier in areas subject to high temperatures or humidity You may use both 8 cm and 12 cm data carriers in the optical drive When using a data carrier of lesser quality vibrations and reading errors may occur CD DVD indicator The CD DVD indicator flashes when a data carrier is inserted The indicator goes out when the drive is ready for reading The indicator lights up when the drive is being accessed You may only remove the data carrier when the indicator is unlit If the CD DVD indicator does not go out after a data carrier has been inserted but instead continues to flash this means that the drive cannot access the data carrier Either the data carrier is damaged or dirty or you are using a data carrier that the drive cannot read 60 Fujitsu Technology Solutions Working with the notebook Inserting or removing a data carrier The notebook must be switched on gt Push the insert eject button 1 Ly The drive tray will open gt Gently pull the drive tray 2 completely out gt Place the data carrier in the drive tray with the printed side facing upwards or X gt Remove a data carrier that has been inserted gt Push in the drive tray until you feel it lock into place AOS Manual removal emergency removal In the event of a power failure or damage to the drive you can remove the data
3. e Any changes you have made to the hardware or software since receiving the notebook Any changes you have made to the BIOS Setup settings since receiving the notebook e Your system configuration and all peripheral devices connected to your system e Your sales contract means that considerable effort has been made to optimise components and equipment in terms of weight space and energy requirements Depending on the particular configuration you have purchased it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor intensive gaming software e g games with intensive 3D graphics Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses data losses or malfunction of the equipment A list of approved drivers and current BIOS versions can be downloaded from http ts fujitsu com support downloads html Our notebooks have been designed primarily with mobile applications in mind This Fujitsu Technology Solutions 99 Troubleshooting and tips Help if problems occur Should you at any time have a problem with your computer that you can t solve yourself in many cases you can quickly solve it by using the SystemDiagnostics program which is pre installed on your computer The SystemDiagnostics program is already installed on devices which were delivered with a Windows operating system gt To start the
4. 107 Technical data Microphone por Eine I Headphones porine Out FireWire pori Docking por USB Universal Serial Bus Kensington Lock Ambient conditions Environment class DIN IEC 721 Mechanism class DIN TEC 721 Operating temperature 5S 44585 O Transport temperature 2K2 15 C 60 C Port Replicator optional Electrical data Safety regulations complied with Protection class Ports Monitor port analogue 5 pin Monitor port digital 25 pin DVI D LAN port RJ45 USB Universal Serial Bus 4x USB 2 0 Audio Line out Docking port 80 pin Ambient conditions Environment class DIN IEC 721 7K1 Mechanism class DIN TEC 721 Operating temperature 5 C 35 C Transport temperature 15 C 60 C 108 Fujitsu Technology Solutions Technical data Rechargeable battery You can find information on the batteries used in your device on the Internet at http ts fujitsu com support You can use different batteries When ordering your device you can select between main battery 1 and main battery 2 In addition you can order the optional battery for installation in the module compartment All batteries are 6 cell batteries Optional battery fitting in the module Main battery 1 Main battery 2 bay Rated voltage 10 8 V 10 8 V 10 8 V Rated capacity 62 6 Wh 56 2 Wh 41 Wh 5 800 mAh 5 200 mAh 3 800 mAh The operating time depends on the device configuration the active applications
5. battery 22d A aid 52 Charging caring for and maintaining the battery 000s cece eee eee eee 53 Removing and installing the battery 0 00 cece ennaa aanrennen 54 Batteries with a capacity of 5800 MAh 6 aee 56 Module ue a A A At cao E ed 57 Removing aiModule init A nia da 58 Installing a MOQU S 00 a O es whites o da 59 Optical E r a E o ON aa Vado aa RR 59 Handling data carriers ico A NN asia 60 CD DVD indicator edicion a AAA A A tos 60 Inserting or removing a data Carrier cece enn eee nes 61 Manual removal emergency removal 0 00 c cece eee eee nae 61 Removing and fitting the dust removal cover ventilation slot Cover ooooooocccoo 62 Using the power management features 0 cece eect naee 63 Memorycards ici id O Pee aang 64 Supported Formals sn NE ene a Match aaa ee 64 Inserting the memory Card 6 ccc cece eee eee Eaa aG 64 Removing the memory Card 00 cece cece eee eee eee eee eee naee 65 EXPressGards surta O A he Ae ote yyy od e 65 MES A NA 66 Removing the card Verid er 67 Loudspeakers and microphones 0 00 c cence eee eee eee eee eee eee 67 SIMMGCANA marmo em rooriniraria ios reee d DE Wh eee a is LIE oda dE EE Maen e e ae in RI 68 Inserting theSIM card ta AA dle la oee te ts 68 Removing a SIM Card iy cee ee thte aa aa 68 Wireless LAN Bluetooth UMTS 1 1 cece cee n tnt e nnn e nent en
6. Solutions 11 Ports and controls I Pen slot 3 Unlocking lever for module bay Module bay with optical drive N I 12 Fujitsu Technology Solutions Ports and controls a I I Hard disk service compartment 3 2 Dust chamber cover 4 Memory service compartment Rechargeable battery I Fujitsu Technology Solutions 13 Important notes Important notes This chapter contains essential safety information which must be followed when working with your notebook Other notes also provide useful information which will help you with your notebook Safety notes Please note the information provided in the Safety manual and in the following safety notes Please pay special attention to the sections in the manual marked with the symbol on the left When connecting and disconnecting cables observe the relevant notes in this operating manual Read the information on the ambient conditions in the Technical data Page 107 and First time setup of your device Page 17 before preparing your notebook for use and switching it on for the first time When cleaning the device please observe the relevant notes in the section Cleaning the notebook Page 16 Pay atte
7. cursor gt Place your finger tip on the screen and move your finger in the direction required Fujitsu Technology Solutions 35 Working with the notebook Scrolling gt Use one finger to quickly stroke across the screen upwards downwards left or right to navigate through the document or to quickly page through the document Dragging gt Place your finger on an item on the screen and then move your finger without removing it from the display this will drag the item to another position You can also use this movement to page slowly through documents Contracting and extending gt Touch the screen at two edges of an area with two fingers spread apart then slide the fingers together to make the area smaller Spread the fingers to make the area larger Rotating gt Touch two corners of a picture on the screen then turn the picture clockwise or counter clockwise at the corners by using your fingers Enlarging a view gt Put two fingers on the touch screen and move them apart 36 Fujitsu Technology Solutions Working with the notebook Reducing a view gt Put two fingers on the touch screen and move them towards each other Using the stylus pen 1 pen tip 2 rocker button 3 eyelet for pen cord 4 eraser You can use the pen on your notebook as an electronic writing implement to select items and to navigate through menu options and programs Programs that support handwriting reco
8. eee tenes 92 Attaching the COVEN ains 555 03 2 dsc pnae A A atados 92 Removing and installing the hard disk 0 0 c cece eect eee ee eeeeaee 93 REMOVING a COVEN esc ea PEREA a eee 93 Removing a hard disk 0 0 eanna ia a e eee nent enna 94 Installing a hard disks ccs hua aaa ee donnie GaN Gee CA NSS edit 95 Attaching the cover ceuta ANA yee dee Aha 96 Finishing component removal ccc cece ene e eae 96 Settings in BIOS Setup Utility ooooooccccccncannncnnrn rr 97 Starting the BIOS Setup Utility 2 0 0 cee nent e nent e nee eeee 97 Operating BIOS Setup Utility 0 0 00 e nuronan 97 Exiting BIOS Setup Utility ias Hoag ron cent a e deena ade 98 Exit Saving Changes save changes and exit BIOS Setup Utility 98 Exit Discarding Changes Discard changes and exit BIOS Setup Utility 98 Load Setup Defaults Copy Standard Entries 0 000 cece 98 Discard Changes Discard changes without exiting the BIOS Setup Utility 98 Save Changes save changes without exiting the BIOS Setup Utility 98 Save Changes and Power Off 2 cece cece ete nann 98 Troubleshooting and tips 00 e ccc eeee eee eee e eee e eens 99 Help if problems OCCU vvvocccic cin AAA as Fide ade es reece eres 100 Restoring the hard disk contents under Windows 2 0e cece eee eee e eee teens 100 The note
9. fire police or medical assistance personnel Hospital rooms residential health care facilities convalescent homes and prisons e Hotel motel or apartment lobbies Stores where telephones are used by patrons to order merchandise 112 Fujitsu Technology Solutions Manufacturer s notes e Public transportation terminals where telephones are used to call taxis or to reserve lodging or rental cars In hotel and motel rooms as at least ten percent of the rooms must contain hearing aid compatible telephones or jacks for plug in hearing aid compatible telephones which will be provided to hearing impaired customers on request DOC Industry CANADA notices Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference Causing Equipment Regulations CET appareil num rique de la class B respecte toutes les exigence du R glement sur le mat rial brouilleur du Canada Notice to Users of the Canadian Telephone Network NOTICE This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications This is confirmed by the registration number The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met It does not imply that Industry Canada approved the equipment Before connecting this equipment to a telephone line
10. in the Control Panel You need to calibrate both portrait and landscape formats Windows 7 To calibrate run the Hardware and Sound Tablet PC Settings function in the Control Panel You need to calibrate both portrait and landscape formats Fujitsu Technology Solutions 39 Working with the notebook Replacing the pen tip With use the pen tip may become worn or may pick up foreign particles that can scratch the screen A damaged or worn tip may not move freely causing unpredictable results when using the pen If problems like these occur with your pen you should replace the pen tip To do this use the pen tip removal tool included with your pen gt Position the tip in the gap between the two ends of the tool to remove the tip b gt Pinch the two ends of the tip changer together so that the tip is firmly clasped 1 then pull it from the barrel gt Use one of the new tips that were supplied with your pen to replace the tip Insert the flat end of the tip into the barrel and push it in firmly until it is in place Do not continue to use a tip which is worn or damaged Installing a pen cord You should attach the pen with a pen cord to prevent accidentally dropping or losing it gt Attach the end of the pen cord with the smaller loop to your pen gt Attach the end of the pen cord with the larger loop to your notebook 40 Fujitsu Technology Solutions Working with the notebook Using the device as a notebo
11. is subject to continuous wear through normal use The key markings are especially prone to wear The key markings are liable to wear away over the life of the notebook The keyboard has been designed to provide all the functions of an enhanced keyboard Some enhanced keyboard functions are mapped with key combinations The following description of keys refers to Windows Additional functions supported by the keys are described in the relevant manuals supplied with your application programs The figure below shows how to access the different characters on keys with overlaid functions The example applies when the Caps Lock key has not been activated The illustrations shown below may differ from your actual device 42 Fujitsu Technology Solutions Working with the notebook Num iy Backspace key The Backspace key deletes the character to the left of the cursor Tab key The Tab key moves the cursor to the next tab stop Enter key return The Enter key terminates a command line The command you have entered is executed when you press this key Caps Lock key The Caps Lock key activates the Caps Lock mode and the corresponding icon is displayed in the Windows information area In Caps Lock mode all of the characters you type appear in upper case In the case of overlay keys the character printed on the upper left of the key will appear when that key is pressed To cancel the Caps Lock function simply press the
12. notebook 2 5 0 0 e eee ee een eee ene e bbe ne nee eebeeeebenneees 29 Switching off the notebook 00 ccc a EEEE RE EEE e eee eee 31 Closing the nOtebOok hoi te at a ee BERS tiesa 32 Language selection Windows XP only 0 e cece eee teen eee eee eee 32 Selecting the language for menu texts cece cect eee eee eee 32 Selecting the language for handwriting recognition and keyboard 0055 33 Handwriting recognition under Windows Vista 000 c eee eee eee eee 33 Handwriting recognition under Windows 7 0000c cece eee eee eee nnna 33 LOD S ran iia AAA Aaa 34 Ambient ight Sensor cx iii A a ie 34 Using the device as a Tablet PC 0c cece enna 35 USING INGOTS caia co Gls be dette 35 Using the stylus pen 2 4 94 440 540 5 pease eae goannas ah ance eee 37 Using the device as a notebook 000 cece eens 41 Touchpad and touchpad buttons 000 cece eee eee eens 41 Keyboard iii a is ee pie fe died eG ead A aa eae eee 42 Virtual numetic keypad ii Gee ee beeen 44 Country and keyboard settings 00 cece cece teen ete eens 45 KeV COMBINATONS do da E a tetrad E rail RE 45 Tablet buttons ai A A A A A as 47 Key combinations easier A eae eae eke terraces 51 Programming the tablet buttons 0 c cece nr 52 Webcam crcl ities lca A AAA uur beds QA UA SME ds 52 Fujitsu Technology Solutions 3 Contents Rechargeable
13. operating system Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used Software oriented components of these instructions refer to Microsoft products if they come within the scope of the delivery If you install other software products pay attention to the operating instructions of the manufacturer Fujitsu Technology Solutions 7 Innovative technology Notational conventions Pay particular attention to text marked with this symbol Failure to observe these warnings could pose a risk to health damage the device or lead to loss of data The warranty will be invalidated if the device becomes defective through failure to observe these warnings LJ Indicates important information for the proper use of the device Indicates an activity that must be performed Indicates a result This font indicates data entered using the keyboard in a program dialogue or at the command line e g your password Name123 or a command used to start a program start exe This font indicates information that is displayed on the screen by a program e g Installation is complete This font indicates terms and texts used in a software interface e g Click on Save names of programs or files e g Windows or setup exe This font indicates cross references to another section e g Safety information cross references to an external source e g a web address For more information go to ht
14. requested to do so in order to start the operating system Detailed information can be found in the chapter Security functions Page 76 Different ways to use your notebook During your daily work you can use your notebook as a tablet PC or as a notebook just as you wish The conversion is lightning fast and effortless Note the direction of rotation in the following description No guarantee claims can be met for damage caused by turning in the wrong direction You must note that the display cannot be turned completely on its own axis 24 Fujitsu Technology Solutions Working with the notebook From notebook to Tablet PC gt Press the release button and unfold the LCD screen upwards slightly gt Rotate the hook from position 1 to position 2 gt Raise the screen into a vertical position Fujitsu Technology Solutions 25 Working with the notebook gt Hold the screen as low as possible on both sides Turn the screen to the left or right in the direction of the arrow At first you will feel some slight resistance then it will turn easily and without friction gt Rotate the display further until it has turned 180 and the hinge latches in 26 Fujitsu Technology Solutions Working with the notebook gt Now fold the screen down until the back of the screen is flat on top of the keyboard and the hook latches in L The screen is now secured in the tablet position F
15. screw 1 gt Slide the hard disk in the direction of the arrow 2 until the contacts disengage gt Remove the hard disk 3 from the hard disk compartment 94 Fujitsu Technology Solutions Removing and installing components during servicing Installing a hard disk gt Place the hard disk into the hard disk compartment 1 gt Slide the hard disk in the direction of the arrow 2 Ensure that the contacts engage gt Tighten the screw 3 Fujitsu Technology Solutions 95 Removing and installing components during servicing Attaching the cover gt Place the cover in the correct mounting position 1 Fasten the screws 2 gt Replace the dust chamber cover see Removing and fitting the dust removal cover ventilation slot cover Page 62 v Finishing component removal After you have removed or changed the system components as you required please prepare your device for operation again as follows gt Install the battery again see Installing a battery Page 55 Turn the notebook the right way up again and place it on a flat surface gt Reconnect the cables that you disconnected before 96 Fujitsu Technology Solutions Settings in BIOS Setup Utility Settings in BIOS Setup Utility The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the notebook When it is delivered the notebook is set to factory default
16. settings You can change these settings in B OS Setup Utility Any changes you make take effect as soon as you save and exit the BIOS Setup Utility The BIOS Setup Utility program contains the following menus About Displays information relating to the BIOS processor and notebook System Advanced system settings Advanced Configuration of various hardware components such as mouse keyboard processor Security Password settings and security functions Boot Configuration of the start up sequence Exit Exits the BIOS Setup Utility Starting the BIOS Setup Utility gt Reboot the notebook switch off on or reboot the operating system L gt The following or a similar display appears on the screen at start up lt F2 gt BIOS Setup lt F12 gt Boot Menu gt Press the function key F2 gt If a password has been assigned enter the password and press the Enter key If you have forgotten the password contact your system administrator or contact our customer service centre The BIOS Setup Utility starts Operating BIOS Setup Utility Press the F1 key to display help on the operation of BIOS Setup Utility The description of the individual settings is shown in the right hand window of the BIOS Setup Utility With the F9 key you can load the default settings of the BIOS Setup Utility Use the cursor keys or gt to select the menu you wish to access to make ch
17. televisions have only two loudspeaker connections and therefore cannot reproduce Dolby digital or DTS In order to reproduce the sound you must go into Windows and adjust the sound settings Proceed as follows Select Startsymbol Settings Control Panel Hardware and Sound Sound Mark Realtek HDMI Output Select Properties Supported formats Deactivate the settings DTS audio and Dolby digital Confirm the settings with OK vvvvyv Fujitsu Technology Solutions 85 Connecting external devices Connecting USB devices On the USB ports you can connect external devices that also have a USB port e g a DVD drive a printer a scanner or a modem USB devices are hot pluggable This means you can connect and disconnect devices while your operating system is running USB 1 x has a maximum data transfer rate of 12 Mbit s USB 2 x has a data transfer rate of up to 480 Mbit s Additional information can be found in the documentation for the USB devices gt Connect the data cable to the external device gt Connect the data cable to a USB port of the notebook Device drivers USB devices will be automatically recognised and installed by your operating system How to remove USB devices correctly Always correctly remove the device according to the rules described below to ensure that none of your data is lost gt Left click on the icon to safely remove hardware located in the taskbar Selec
18. to work you must have set up at least two partitions on your hard drive The first partition contains the boot information The second larger partition is encrypted and contains the operating system as well as the user data Important The partitions must be set up before Windows Vista is installed Fujitsu Technology Solutions 81 Security functions Enabling TPM Requirement You have assigned a supervisor password see Security functions Page 76 Call up the BIOS Setup and select the Security menu Mark the TPM Security Chip Setting field and press the Enter key Select Enabled to activate the TPM Once you have activated the TPM the Clear Security Chip option appears Select Clear Security Chip to delete the holder in the TPM By clicking on Enabled all secret keys e g SRK Storage Root Keys AIK Attestation Identity Keys etc generated by applications are deleted Please note that you will then no longer be able to access the data you have encrypted with the keys based on that holder gt Select the Exit Saving Changes option in the Exit menu gt Press the Enter key and select Yes L The notebook will restart and TPM will be enabled after the reboot ryvy Disabling TPM Requirement You have assigned a supervisor password see Security functions Page 76 Call up the BIOS Setup and select the Security menu Mark the TPM Security Chip Setting field and press the Enter key Select Disabled to de
19. you that it is now safe to remove the memory card gt On devices with card locking Press on the storage card 1 L gt The storage card is released and can now be removed gt Pull the storage card out of the slot 2 E El ExpressCards An ExpressCard slot enables operation of an ExpressCard 34 or ExpressCard 54 Consult the documentation supplied by the ExpressCard s manufacturer and follow the instructions provided Never use force when installing or removing an ExpressCard Make sure that no foreign objects enter the ExpressCard slot Fujitsu Technology Solutions 65 Working with the notebook Inserting the card Keep the placeholder for the slot in a safe place When you remove the card again you must reinstall the placeholder This prevents foreign bodies from getting into the slot De If the eject button 1 is recessed press it once so that it disengages Now press the eject button again so that the placeholder protrudes slightly from the notebook Pull the card placeholder out of the slot 2 Insert the card into the slot guide with the connection contacts first Gently push the card into the slot either until it will go no further or you feel it engage Do not use excessive force Depending on the type the card may protrude slightly from the slot Please see the documentation relating to the card for driver installation instructions Fujitsu Technology Solutions Working with the notebo
20. 6 62 Fujitsu Technology Solutions Working with the notebook Using the power management features The notebook uses less power when the available power management features are used You will then be able to work longer when using the battery before having to recharge it Power efficiency is increased and environmental pollution reduced By choosing the best power options you can make significant savings and at the same time help protect the environment When you fold down and close the LCD screen depending on the setting in Windows the notebook automatically enters a power saving mode We recommend the following settings On external power On battery power After 10 minutes After 5 minutes Turn off hard disk s After 15 minutes After 10 minutes Energy saving S3 After 20 minutes After 15 minutes Hibernate mode S4 After 1 hour After 30 minutes gt Select the power management functions in your Control Panel gt Select the Screen Saver in your Control Panel or gt Right click on the desktop Switch on the screen saver by clicking Personalization Change screen saver If you need further information about an option you can get help with most settings by pressing F1 to open the Microsoft Help When the notebook is in power saving mode the following must be remembered During power saving mode open files are held in the main memory or in a swap file on the hard disk Never turn off
21. Caps Lock key again Shift key The Shift key causes uppercase characters to appear In the case of overlay keys the character printed on the upper left of the key appears when that key is pressed Fujitsu Technology Solutions 43 Working with the notebook Fn button The Fn key enables the special functions indicated on overlay keys see Key combinations Page 45 Cursor keys The cursor keys move the cursor in the direction of the arrow i e up down left or right Start key The Start key opens the Windows Start menu Menu key The Menu key invokes the menu for the marked item Virtual numeric keypad To provide the convenience of a numeric keypad your keyboard is equipped with a virtual numeric keypad The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key If you have switched on the virtual numeric keypad you can output the characters shown on the upper right of the keys The keyboard layout shown below may differ from your actual device ues 7 ls lo ilo M e 0 i Mi 1 Valid characters when the Num 2 Valid characters when the key is not activated is activated Further information about the status indicators can be found in chapter Status indicators Page 20 44 Fujitsu Technology Solutions Working with the notebook Country and
22. Contact your sales outlet or our customer service centre System timer error gt Contact your sales outlet or our customer service centre 106 Fujitsu Technology Solutions Technical data Notebook Processor Main memory SO DIMM Electrical data Safety regulations complied with Protection class Maximum power consumption when the notebook is switched on and the battery is charged LCD screen Size Resolution Pixel class Brightness control Digitizer Graphics card Chip Recommended screen resolution of the external CRT monitor 53 34 cm Width x depth x height Weight depending on configuration Input devices Keyboard Touchpad Tablet buttons Pen ExpressCard slot Memory card slot SIM card slot optional Ports Monitor port analogue HDMI port LAN port Fujitsu Technology Solutions Technical data Intel Core 2 Duo processor Celeron Maximum 8 GB DDR3 2 slots for 1 GByte 2 GByte or 4 GByte modules CE CE II 80 W 100 W while a port replicator is being used 30 73 cm TFT WXGA 1280 x 800 32 Bit Touch panel LED Backlight Anti Glare matt screen surface 8 levels Dual Digitizer GMA 4500MHD 1280 x 1024 maximum 1920 x 1200 16 7 million colours at 85 Hz 297 mm x 233 mm x 36 4 mm from 1 99 kg 85 keys 2 keys 5 keys 1 rocker button eraser 1 x ExpressCard 34 or ExpressCard 54 1 x SD or MS card 15 pin female connector 19 pin socket Socket RJ45
23. French Italian Japanese Korean Chinese traditional and simplified Dutch Portuguese and Brazilian Handwriting recognition under Windows 7 Handwriting recognition under Windows 7 currently supports the following languages English German French Italian Japanese Korean Chinese traditional and simplified Dutch Portuguese Spanish Brazilian Norwegian Bokm l and Nynorsk Swedish Finnish Danish Polish Rumanian Serbian Cyrillic and Latin script Catalan Russian Czech and Croatian Fujitsu Technology Solutions 33 Working with the notebook LCD screen High quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH For technical reasons TFT monitors are manufactured for a specific resolution An optimal clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor A monitor resolution which differs from the specification can result in an unclear picture The screen resolution of the LCD monitor of your notebook is optimally set at the factory The standard of production techniques today cannot guarantee an absolutely fault free screen display A few isolated constant lit or unlit pixels picture elements may be present The maximum permitted number of pixels faults is stipulated in the international standard ISO 9241 3 Class II Example A monitor with a resolution of 1280 x 800 has 1280 x 800 1024000 pixels Each pixel consists of three su
24. Operating Manua System LIFEBOOK 14310 T4410 O FUJITSU Congratulations you have decided to buy an innovative Fujitsu product The latest information about our products useful tips updates etc is available from our website http ts fujitsu com For automatic driver updates go to http support ts fujitsu com com support index html Should you have any technical questions please contact our Hotline Service Desk see Service Desk list or visit http ts fujitsu com support servicedesk html Your sales partner e Your sales office We hope you really enjoy using your new Fujitsu system O FUJITSU Copyright Fujitsu Technology Solutions 01 2010 Published by Fujitsu Technology Solutions Mies van der Rohe StraRe 8 80807 Munich Germany Contact http ts fujitsu com support All rights reserved including intellectual property rights Subject to technical alterations Delivery subject to availability No warranty is offered or liability accepted in regard of the completeness correctness or current applicability of any data or illustrations Brand names may be protected trademarks of the respective manufacturer and or protected by copyright Use of these by third parties for their own purposes may constitute an infringement of the holders rights Further information can be found at http ts fujitsu com terms_of_use html Order No Fujitsu Technology Solutions GmbH A26391 K281 Z220 1 7619 ed
25. S The installation of radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device Switching the wireless components on and off Before switching on your device for the first time the on off switch for radio components must be in the ON position gt Slide the ON OFF switch into the ON position to activate the radio components or gt Slide the ON OFF switch to the E OFF position to deactivate the radio components E If you switch off the radio components the wireless LAN transmission unit antenna and if present the Bluetooth and UMTS module will also be switched off You can enable and disable the installed radio components individually using the WirelessSelector programme You can also deactivate the wireless components individually in the BIOS Setup For this to occur you must either not have assigned a supervisor password or if a supervisor password has been assigned you must know this password Pay attention to the additional safety notes for devices with wireless components provided in the Safety manual Details on using Wireless LAN can be found in the online help system included in the Wireless LAN software You can find more information on how to use Bluetooth on the CD you received with your Bluetooth software You can obtain more information on UMTS from your service provider Fujitsu Technology Solutions 69 Working with th
26. Switching off module 63 Switching on module 63 Fujitsu Technology Solutions
27. SystemDiagnostics program click on Startsymbol Program Fujitsu SystemDiagnostics gt If a problem is found during a test run the SystemDiagnostics program outputs a code e g DIFS Code YXXX123456789123 gt Make a note of the output DIFS code and the identity number of your device The identity number can be found on the type rating plate on the back of the casing gt For further clarification of the problem contact the Service Desk for your country see the Service Desk list or visit the Internet at http ts fujitsu com support servicedesk html When you do this please have ready the identity number and serial number of your system and the DIFS code Restoring the hard disk contents under Windows You can reinstall the operating system with the Windows Recovery CD and the Drivers 8 Utilities CD DVD The instructions are provided on the case of the Recovery CD will be deleted We advise you to backup your files to an external hard During the reinstall process your personal files and any installed programs drive or CD DVD disk before you start gt Switch the notebook on Ly The following display briefly appears on the screen during start up lt ESC gt Diagnostic screen lt F12 gt Boot Menu lt F2 gt BIOS Setup gt When this message appears press the function key F12 gt Insert the Windows Recovery CD into the optical drive gt Select CD ROM and press the Enter key gt Follow the ins
28. USA Although it is not explicitly forbidden to travel in the US trading area carrying this device to avoid trouble at customs clearance Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area Regulatory information for notebooks without radio device NOTICE Changes or modifications not expressly approved by Fujitsu Technology Solutions could void this user s authority to operate the equipment Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Fujitsu Technology Solutions 111 Manufacturer s notes Connect the equipment into an outlet that is on a different circuit than the receiver Consult the dealer or an experienced radio TV technician for help Noti
29. a Tablet PC You can execute commands as follows e using the stylus pen supplied with your device e using your finger Using fingers You can execute certain commands by using your finger tip on the touchscreen of your device Everything which you can select or activate using your finger tip can also be selected or activated using the stylus pen Calibrate the Dual Digitizer for finger based operation of the device Please see the appropriate supplementary sheet for instructions on how to calibrate your device to use Dual Digitizer Technology Please note There are separate calibration programs available for calibrating the stylus pen and for calibrating finger based operation In each case use the calibration tool described in the supplementary sheet Do not use the calibration tool for the stylus pen to calibrate finger based operation Selecting menu options click with the left mouse button gt Touch the menu option with your finger tip Starting programs double click with the left mouse button gt Briefly touch the program icon twice with your finger tip Moving objects windows drag while holding the left mouse button pressed gt Place your finger tip directly on the object window hold it pressed against the screen and move the desired object window Opening a context menu click with the right mouse button Touch the desired item once with your finger tip L gt The context menu appears Moving the
30. activate the TPM From the Exit menu choose the option Exit Saving Changes Press the Enter key and select Yes Your notebook will now restart and TPM will be disabled VVVVY 82 Fujitsu Technology Solutions Connecting external devices Connecting external devices A Always refer to the safety information provided in Important notes Page 14 before connecting or disconnecting any devices to or from your notebook Always read the documentation supplied with the device you wish to connect Never connect or disconnect cables during a thunderstorm Never pull at a cable when disconnecting it Always grasp the plug Follow the steps below in order when connecting or disconnecting devices to your notebook With some devices such as USB devices it is not necessary to switch off the notebook and the device before connecting disconnecting For more information about whether or not devices need to be switched off please refer to the documentation supplied with the external device Some of the external devices require special drivers see the operating system and external device documentation Connecting devices to the notebook 1 Turn off your notebook and all external devices 2 Unplug your notebook and all devices from the mains sockets 3 Connect the cables for your external devices following the instructions 4 Plug all power cables into the mains sockets Disconnecting devices from the notebook 1 Turn off
31. an find information on programming the tablet buttons in Programming the tablet buttons Page 52 Shortcut C Starting predefined application A This button allows you to start a previously defined application By default the button is preconfigured to start the Launch Center application Starting predefined application B This button allows you to start a previously defined application By default the button is preconfigured to start the Windows Journal application Toggle output screen Use this key combination to select which screen s is are used for display if an external monitor is connected Screen output is possible only on the notebook s LCD screen only on the external monitor both the LCD screen and the external monitor Press the key combination several times to switch through all possible settings If you have connected two external monitors to the port replicator the following display outputs are possible only on the notebook s LCD screen e just the external monitor analogue simultaneously on the LCD screen digital both the LCD screen of the notebook and the external monitor analogue You cannot switch output to both external monitors on the Port Replicator via the key combination The tablet button FN has a practical delay function This allows you to press the two buttons for a shortcut one after the other instead of needing to press them both at the same time After pressi
32. and the energy saving settings Mains adapter Primary Rated voltage 100 V to 240 V automatic Rated frequency 50 Hz to 60 Hz automatic Max rated current 0 7 1 2A Secondary Nominal power without port replicator 80 W e with port replicator 100 W Rated voltage 19 V Max rated current without port replicator 4 22 A e with port replicator 5 3 A An additional mains adapter or power cable can be ordered at any time Fujitsu Technology Solutions 109 Manufacturer s notes Manufacturer s notes Energy Star Devices which are certified according to the Energy Star environmental mark help to save money and reduce the emission of greenhouse gases Power Management settings on delivery e Monitor switched off after lt 15 minutes of inactivity Automatic activation of energy saving mode ACPI S3 lt 30 minutes of inactivity Detailed information about the requirements of the Energy Star environmental mark and the products which satisfy these requirements can be found on the Internet at https www energystar gov E ENERGY STAR Disposal and recycling Information about this subject can be found on your notebook or on our Internet pages Declarations of Conformity The Declarations of Conformity concerning the device can be found at our Internet address http ts fujitsu com Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requ
33. anges The menu is displayed on the screen Select the option you want to change with the cursor keys or J Press the Enter key Press the ESC key to exit the selected menu For future reference make a note of the changes you have made for example in this manual VVVVIV Fujitsu Technology Solutions 97 Settings in BIOS Setup Utility Exiting BIOS Setup Utility You need to select the desired option in the Exit menu and activate it by pressing the Enter key Exit Saving Changes save changes and exit BIOS Setup Utility gt To save the current menu settings and exit the BIOS Setup Utility select Exit Saving Changes and Yes L The notebook is rebooted and the new settings come into effect Exit Discarding Changes Discard changes and exit BIOS Setup Utility gt To discard the changes select Exit Discarding Changes and Yes L gt The settings in place when BIOS Setup Utility was called remain effective BIOS Setup Utility is terminated and the notebook is rebooted Load Setup Defaults Copy Standard Entries To copy the standard entries for all menus of the BIOS Setup Utility choose Load Setup Defaults and Yes Discard Changes Discard changes without exiting the BIOS Setup Utility gt To discard the changes you have made select Discard Changes and Yes Ly The settings in place when BIOS Setup Utility was called remain effective You can now make additional
34. arge static build up e g by touching a grounded object before working The equipment and tools you use must be free of static charges Remove the power plug from the mains supply before inserting or removing boards containing ESDs Always hold boards with ESDs by their edges Never touch pins or conductors on boards fitted with ESDs Fujitsu Technology Solutions 89 Removing and installing components during servicing Preparing to remove components If you are going to remove or change system components prepare for the removal as follows Please observe the safety information in chapter Important notes Page 14 Remove the power plug from the mains outlet gt Switch the device off The device must not be in energy saving mode gt Close the LCD screen Remove all the cables from the device Turn the device over and place it on a stable flat and clean surface If necessary lay an anti slip cloth on this surface to prevent the device from being scratched gt Remove the battery see Removing a battery Page 54 y Installing and removing memory expansion If you are asked by the Hotline Service Desk to remove and install the memory expansion yourself proceed as follows Please observe the safety information in chapter Important notes Page 14 When installing removing memory modules the battery must be removed from the notebook and the notebook must not be connected to the po
35. book s date or time is incorrect 0 eee eee 101 Battery indicator does not illuminate 00 cece ents 101 When certain characters are entered on the keyboard only numerals are written 101 The notebook s LCD screen remains blank 0 00 cece eens 101 The LCD screen is difficult to read 0 eee eee eee 102 The external monitor remains blank 0 00 c cece eee nena 102 The external monitor is blank or the image is unstable 20 cece eee eee eee 102 The cursor does not correctly follow the pen movements eeeee eee eee eee 103 The notebook cannot be started 2 0 kc ccc eee nee e eee eee teen bbe e eee e ene 103 The notebook stops working cece eee eee eee eee eee 104 The printer does not print kee ea 104 The radio connection to a network does not work 0 e cece eens 104 The battery discharges too quickly 0 0 c cece eee eee eee teen aes 105 Acoustic warnings reded eede e Spleen Sei A 105 Error message s om the Screen coccion ee ee eee ence eee ee 105 Fujitsu Technology Solutions 5 Contents Technical data i comiencen a A a A lada ao paved ale 107 Notebook 0 00 AAA E a 107 Port Replicator optional oocccccocccccccccconnccn eet eee enaee 108 Rechargeable battery iii a Weems Laat MENA LOG ode oo 109 Mais adapter hara ee a Dee iia yeas Tagan yaad odos 109 Manufacturer s noteS cece c
36. bpixels red green and blue so there are almost 3 million subpixels in total According to ISO 9241 3 class II a maximum of 2 light and 2 dark pixels and an additional 5 light or 10 dark subpixels or a corresponding mix may be defective 1 light subpixel counts as 2 dark subpixels Pixel A pixel consists of 3 subpixels normally red green and blue A pixel is the smallest element that can be generated by complete functionality of the display Subpixel A subpixel is a separately addressable internal structure within a pixel that enhances the pixel function Cluster A cluster contains two or more defective pixels or subpixels in a 5 x 5 pixel block Background lighting TFT monitors are operated with background lighting The luminosity of the background lighting can decrease during the period of use of the notebook However you can set the brightness of your monitor individually Synchronising the display on the LCD screen and an external monitor For more information please refer to the chapter Key combinations Page 45 under Display output switch between Ambient light sensor If your notebook was shipped with the Windows 7 operating system the screen brightness is regulated by means of the ambient light sensor and depending on the respective light conditions This results in optimum readability and longer battery life at the same time 34 Fujitsu Technology Solutions Working with the notebook Using the device as
37. carrier manually gt Switch your notebook off gt Push a pen or a piece of wire such as a paperclip firmly into the opening 1 Ly The drive tray is ejected You can now pull the drive tray 2 out of the drive Fujitsu Technology Solutions 61 Working with the notebook Removing and fitting the dust removal cover ventilation slot cover In order to ensure optimum cooling of the components in your notebook you should periodically clean the ventilation slot of the heatsink This ensures optimum fan performance You can achieve the best cleaning results with a small hand held vacuum cleaner If necessary you can also use a dry brush to release dust from the ventilation slots Do not use any cleaning liquids Ensure that no liquid enters the device Be sure that you do not damage the ventilation blades in the process Do not use any abrasives for cleaning purposes To avoid overheating of the device do not remove the ventilation slot cover when the device is switched on gt Prepare for removal see chapter Preparing to remove components Page 90 gt Press and hold the lock of the ventilation slot cover 1 and remove it from its slot 2 a 4 gt Clean the dust chamber with a dry brush gt Insert the ventilation slot cover into the slot 1 at an angle as shown and ensure that you feel it click into place gt Complete the removal see chapter Finishing component removal Page 9
38. ce to Users of the US Telephone Network Your notebook may be supplied with an internal modem which complies with Part 68 of the FCC rules On this notebook is a label that contains the FCC Registration Number and the Ringer Equivalence Number REN for this equipment among other information If requested the user must provide their telephone company with the following information 1 The telephone number to which the notebook is connected 2 The Ringer Equivalence Number REN for this equipment 3 The equipment requires a standard modular jack type USOC RJ 11C which is FCC Part 68 compliant 4 The FCC Registration Number This equipment is designed to be connected to the telephone network or premises wiring using a standard modular jack type USOC RJ 11C which is FCC Part 68 compliant and a line cord between the modem and the telephone network with a minimum of 26AWG The REN is used to determine the number of devices that you may connect to your telephone line and still have all of those devices ring when your number is called Too many devices on one line may result in failure to ring in response to an incoming call In most but not all areas the sum of the RENs of all of the devices should not exceed five 5 To be certain of the number of devices you may connect to your line as determined by the RENs contact your local telephone company If this equipment causes harm to the telephone network your telephone company may discontinue y
39. croll down in your document with this key Scroll up You scroll up in your document with this key Fujitsu Technology Solutions 47 Working with the notebook Change screen orientation When you press the Orientation button the orientation of the screen display changes from portrait vertical to landscape horizontal or vice versa When you would like to use the Tablet PC as an eBook for example you would use the portrait orientation When accessing spreadsheets you would more typically use a landscape orientation Open Fujitsu menu Pressing this tablet button twice in quick succession will bring up the Fujitsu menu on your screen The Fujitsu menu is used to change certain system settings Log on to the system or open the Windows Task Manager If you hold this tablet button down for two seconds you can log back on to the system again e after system startup e after a system lock when returning from power management After log on pressing the tablet button for two seconds launches the Windows Task Manager or in the network opens the security window Functions when the security system is active If you have assigned a supervisor password and or user password you can enter this via the tablet buttons when starting your device Security functions Security button 1 to enter the password Security button 2 to enter the password Security button 3 to enter the password 48 Fujitsu Tech
40. cting external devices Page 83 Fujitsu Technology Solutions 67 Working with the notebook SIM card A SIM Card Subscriber Identity Module is a chip card which is inserted in a mobile telephone or notebook to enable access to a mobile radio network in conjunction with an installed UMTS module Follow the instructions supplied by the provider of the SIM card The SIM card slot is located in the battery compartment and can only be accessed when the battery is removed Inserting the SIM card gt Prepare for insertion of the SIM card see chapter Preparing to remove components Page 90 gt If necessary open the clip a of the SIM card gt Slide the SIM card into the slot 1 until it engages as shown in the battery compartment gt Slide the SIM card lock a in the direction of the arrow 2 gt Complete the insertion see chapter Finishing component removal Page 96 Removing a SIM card gt Prepare for removal of the SIM card see chapter Preparing to remove components Page 90 gt Slide the SIM card lock a in the direction of the arrow 1 gt Press on the edge of the SIM card so that it jumps up slightly out of the slot gt Pull the SIM card out of the slot in the direction of the arrow 2 gt Complete the removal see chapter Finishing component removal Page 96 68 Fujitsu Technology Solutions Working with the notebook Wireless LAN Bluetooth UMT
41. d Industrie Canada applicables au mat riel terminal Cette conformit est confirm e par le num ro d enregistrement Le sigle IC plac devant le num ro d enregistrement signifie que l enregistrement s est effectu conform ment une d claration de conformit et indique que les sp cifications techniques d Industrie Canada ont t respect es II n implique pas qu Industrie Canada a approuv le mat riel Fujitsu Technology Solutions 113 Manufacturer s notes Avant de connecter cet quipement a une ligne t l phonique l utilisateur doit v rifier s il est permis de connecter cet quipement aux installations de t l communications locales L utilisateur est averti que m me la conformit aux normes de certification ne peut dans certains cas emp cher la d gradation du service Les r parations de l quipement de t l communications doivent tre effectu es par un service de maintenance agr au Canada Toute r paration ou modification qui n est pas express ment approuv e par Fujitsu ou toute d faillance de l quipement peut entra ner la compagnie de t l communications a exiger que Putilisateur d connecte l quipement de la ligne t l phonique AVIS L indice d quivalence de la sonnerie IES du pr sent mat riel est de 0 0 LIES assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccord s a une interface t l phonique La terminaison d une interface peut consis
42. der If the pen is stored with the tip pointing down this may have an adverse effect on the pen mechanism particularly under high temperatures In this case the pen tip may react as though it is constantly being pressed down To avoid damage the pen should be stored in the pen slot when not in use The pen can be influenced by electromagnetic fields cursor quivers or jumps There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the pen down firmly The screen responds to entries made with the tip of the finger or the pen when the tip of the finger or the pen is in direct contact with the screen You can use the pen to perform all the functions for which you would otherwise use a mouse In addition you can conveniently delete hand written pen entries using the pen Selecting menu entries Click with the left hand mouse Touch the menu entry with the button pen tip Starting programs Double click with the left hand Briefly touch the program icon mouse button twice with the pen tip Moving objects windows Drag with the left hand mouse Place the pen tip directly on button held pressed the object window Hold the pen tip pressed against the screen Move the desired object window Opening a context menu Click with the right hand mouse Touch the desired element with button the pen and leave the pen on the element for a moment Moving the cursor Place the pen tip directly on the screen
43. e in an explosive environment or e in situations where the interference risk to other devices or services is perceived or identified as harmful In cases in which the policy regarding use of radio devices in specific environments is not clear e g airports hospitals chemical oil gas industrial plants private buildings obtain authorization to use these devices prior to operating the equipment Fujitsu Technology Solutions 115 Manufacturer s notes Regulatory Information Disclaimers Installation and use of this radio device must be in strict accordance with the instructions included in the user documentation provided with the product Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user s authority to operate the equipment The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer It is the responsibility of the user to correct any interference caused by such unauthorized modification substitution or attachment The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines Export restrictions This product or software contains encryption code which may no
44. e notebook Setting up WLAN access Requirement A WLAN must be available and you must have the corresponding access information Information on configuring the WLAN access can be found in the documentation for your operating system Access via UMTS If you ordered an integrated UMTS module with your system you can enjoy optimum reception and maximum energy efficiency without awkward cables or antennas The optional UMTS module is ready for use straight away If you did not order a UMTS module you can purchase the accessories for UMTS reception from your retailer or your Fujitsu Technology Solutions dealer You will find information on establishing the connection with the UMTS network in the documentation for the hardware used You can connect your device with the Internet via UMTS To do this use one of the following types of connection a USB dongle a USB stick with your mobile phone provider s SIM card UMTS ExpressCard for inserting in the ExpressCard slot of your device mobile end device e g mobile phone with Bluetooth or cable connection Ethernet and LAN The internal network module of your notebook supports Ethernet LAN You can use it to establish a connection to a local network LAN Local Area Network gt Connect the network cable to the LAN port of the notebook 1 gt Connect the network cable to your network connection 2 Your network administrator can help you to configure and use t
45. e that no foreign bodies get into the battery connections Never store a battery for longer periods in the discharged state This can make it impossible to recharge Removing a battery gt Press in the two catches 1 keep them pressed and lift the battery out of the battery compartment 2 54 Fujitsu Technology Solutions Working with the notebook Installing a battery gt Position the battery at the edge of the casing 1 gt Push the battery into the battery compartment until it locks into position 2 Fujitsu Technology Solutions 55 Working with the notebook Batteries with a capacity of 5800 mAh With these batteries you can check the state of charge directly on the battery itself gt Remove the battery see Removing and installing the battery Page 54 gt Press the key 1 Ly The LED a lights up in one of the following colours LED indicator State of charge Green The battery is between 50 and 100 charged Orange The battery is between 13 and 49 charged The battery is charged somewhere between 1 and 12 LED not lit The battery is fully discharged 56 Fujitsu Technology Solutions Working with the notebook Module The design of your notebook enables the flexible use of notebook batteries and drives The following modules can be operated in the module bay of your notebook Second battery e Second hard disk drive e Optical drive Empty plug in u
46. e virtual numeric keypad of your device is gt Press the Num key activated see Virtual numeric keypad Page 44 The notebook s LCD screen remains blank Troubleshooting Monitor is switched off gt Press a key or touch the touchpad External monitor or television set connected gt Press the key combination to switch the screen output see Key combinations Page 45 Fujitsu Technology Solutions 101 Troubleshooting and tips The LCD screen is difficult to read Reflected glare Turn the notebook or alter the tilt of the LCD screen gt Increase the brightness of the screen The external monitor remains blank Troubleshooting Monitor is switched off gt Switch the external monitor on Power saving has been activated monitor is gt Press any key to continue blank Brightness is set to dark is set to dark gt gt Adjust the brightness of the monitor gt Adjust the brightness of the monitor brightness of the monitor ee output is set to the notebook s LCD gt Press the key combination to switch the screen screen output see Key combinations Page 45 The external monitor s power cable or data gt Switch off the external monitor and the cable is not connected properly notebook gt Check whether the power cable is plugged properly into the external monitor and into the power socket gt Check whether the data cable is properly connected to the notebook and
47. eadphone Zin Q port of the notebook L The internal loudspeakers are disabled If you purchase a cable from a retailer please note the following information The headphone port on your notebook is a 3 5 mm jack socket If you want to connect headphones or a speaker you will need a 3 5 mm jack plug 88 Fujitsu Technology Solutions Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook Unauthorised opening or incorrect repair may greatly endanger the user electric shock fire risk and will invalidate your warranty After consulting the Hotline Service Desk you may remove and install the components described in this chapter yourself If you remove and install components without consulting the Hotline Service Desk then the warranty of your notebook will be voided Notes on installing and removing boards and components e Switch the notebook off and pull the power plug out of the mains socket Always remove the battery Take care when you use the locking mechanisms on the battery and any other component e Never use sharp objects such as screwdrivers scissors or knives as leverage to remove covers Boards with electrostatic sensitive devices ESD are marked with the label A shown t A When handling boards fitted with ESDs you must always observe the following points You must always disch
48. ece cece eee eee eee eee a a eee a a 110 Energy Star 55 4 saad Aa O tl peers percent hh be heb bis 110 Disposal and recycling sc uc somere cama catenins A A Ra 110 Declarations of Conformity isisisi tost canteen na dd eee 110 Tested safety GS valid only for LIFEBOOK T4410 cece eee eens 110 CEMA KING ara dde Bato a don 111 Regulatory notices vivio RR ee Ae aie 111 Regulatory information for notebooks without radio device ccc eee eee eee 111 DOC Industry CANADA notices 6 0 cece nee tenet ene eneeee 113 FCC Regulatory information for notebooks with radio device 0000e cece eee 115 dE iris E eee eee ee AG DA ERA EAT swine 117 6 Fujitsu Technology Solutions Innovative technology Innovative technology and ergonomic design make your device a reliable and convenient companion The device boots very quickly is ready for immediate use and offers a particularly long operating time because of its high capacity battery With the user friendly BIOS Setup Utility you can control your notebook s hardware and better protect your system against unauthorised access by using the powerful password properties Information on the connections and user components of your notebook can be found in Ports and controls Page 9 Further information The Windows drivers for your device can be found on our Internet site The factory installation of your device does not support any other
49. ed Fn Screen output is possible only on the notebook s LCD screen only on the external monitor on the notebook s LCD screen and the external monitor at the same time Press the key combination several times to switch through all possible settings If you have connected two external monitors to the port replicator the following display outputs are possible only on the notebook s LCD screen only on the external monitor analogue at the same time on the LCD screen digital at the same time on the notebook s LCD screen and on the external monitor analogue You cannot use the key combination to switch output at the same time to both external monitors on the Port Replicator Halt current operation This key combination can be used to halt an operation instantly without clearing the keyboard buffer Back tab This key combination moves the cursor back to the previous tab stop 46 Fujitsu Technology Solutions Working with the notebook Tablet buttons Your notebook has five multifunction tablet buttons You can navigate on the screen with a simple press of a button call preset applications or ones that you have set yourself The tablet buttons have different uses in different modes You can also program each of them individually see Programming the tablet buttons Page 52 Basic functions when the device has booted Basic function Scroll down You s
50. eneee 69 Switching the wireless components on and off 2 cece eee eee eens 69 Setting up WLAN access jce een eee all 70 Access via UMTS Cusco A ei et 70 Ethernet and LAN cunado add Ae alowed sed 70 Your Por RepliCator a 6055 4s ee O eee PA ae ie 71 Ports on the Port Replicator 0 0 cece cece ete eee naee 71 Connecting the notebook to the Port Replicator 00 c cece eee eee 73 Connecting the mains adapter to the Port Replicator cece eee eee eee 74 Switching on the notebook via the port replicator 0 00 cece eee eee eee 74 Switching off notebook via Port Replicator 0 0 c cece eee teens 74 Disconnecting the notebook from the Port Replicator c cece eee eee 75 Security fUNCHONS ccoo tt eines 76 Brief overview of security functions 0c cece eee eee eee ena 76 Configuring the fingerprint Sensor 0 c cece nent e eee eee 77 Use Kensington Lock asi meniko de eee de 77 Configuring password protection in BIOS Setup Utility 0 0 cece eee eee eee 78 Protecting BIOS Setup Utility supervisor and user password 000 eeeeeeeee 78 Password protection for booting of the operating system cece eee eee 79 Using the security function of the tablet keys oooooccccccccooccccccnnrrcn een nee 80 Setting the Supervisor password 0 000 c ccc eeeeeeeneeeee eee e tee
51. ervice technician Only use cleaning products designed for computers Normal household cleaners and polishes can damage the markings on the keyboard and the device the paintwork or the notebook itself Ensure that no liquid enters the notebook The LCD screen very sensitive to scratches Only clean the display surface with a very soft slightly damp cloth gt Switch the notebook off gt In order to prevent accidentially switching the device on remove the power cable from the mains adaptor and remove the battery see Removing and installing the battery Page 54 L The surface can be cleaned with a dry cloth If particularly dirty use a cloth which has been moistened in mild domestic detergent and then carefully wrung out To clean the keyboard and the touchpad if available you can use disinfectant wipes Ensure that no liquid enters the device 16 Fujitsu Technology Solutions First time setup of your device First time setup of your device Please read the chapter Important notes Page 14 If your device is equipped with a Windows operating system the necessary hardware drivers and supplied software are already pre installed Before you switch on the device for the first time connect it to the mains voltage using the mains adapter see Mains adapter connecting Page 18 The mains adapter must be connected during the entire installation process A system test is performed when your device is firs
52. es a hardware profile for the Docked mode In this profile for example the setting is saved as to which monitor was last used for output This profile will be loaded as soon as the notebook is connected to a Port Replicator of the same type Switching on the notebook via the port replicator gt Press the ON OFF switch on the port replicator to switch the notebook on L gt The power on indicator of the Port Replicator lights up Or Switching off notebook via Port Replicator gt Close all applications and shut down your operating system please refer to the manual for the operating system If the notebook cannot be shut down properly press the ON OFF button on the Port Replicator for approx four seconds The notebook will switch off Any unsaved data may however be lost 74 Fujitsu Technology Solutions Working with the notebook Disconnecting the notebook from the Port Replicator Problems may occur if the notebook is removed from the Port Replicator during operation We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed gt Switch the notebook off gt Pull the unlocking lever in the direction of the arrow 1 until you hear the notebook unlatch gt Lift off the notebook 2 Fujitsu Technology Solutions 75 Security functions Security functions Your notebook has several security features that you can use to secu
53. f power being drawn Troubleshooting A beep sounds every few seconds gt Charge the battery The battery is almost flat Error messages on the screen This section describes the error messages generated by the BIOS Setup Error messages displayed by the operating system or programmes are described in the relevant documentation If the error message appears repeatedly despite troubleshooting measures please contact the place of purchase or our customer service centre Error message cause CMOS battery bad If the error message occurs repeatedly the buffer battery in the notebook is flat System CMOS checksum bad default configuration used The system configuration information is incorrect Fujitsu Technology Solutions Resolution gt Contact your sales outlet or our customer service centre Switch the notebook off Switch the notebook on Press the function key BIOS Setup In the BJO Setup select the Exit menu Select the entry Load Setup Defaults Select OK and press the Enter key F2 to access the 105 Troubleshooting and tips Error message cause Extended memory failed at offset xxxx Failing Bits Check whether the additional memory ZZZZ ZZZZ module has been inserted correctly When testing the extended memory an error has resulted at the address xxxx Failure Fixed Disk n gt Start the BIOS Setup Primary Master The settings of the hard disk drive are inco
54. f the notebook beforehand The mains adapter must be connected to the Port Replicator when the notebook is connected to the Port Replicator We recommend that the notebook is not operated with the LCD screen closed when the notebook is connected to the Port Replicator The resulting overheating can cause reduced performance and increased activity of the integrated fan Switch the notebook off gt Remove the mains plug for the mains adapter from the mains socket gt Disconnect the mains adapter cable from the DC socket DC IN of the notebook The Port Replicator must be adjusted to the size of your notebook To do this the device marked in grey in the diagram must be moved from position A to position B on the Port Replicator gt Hold the device at the positions marked with 1 gt Slide the device in the direction of the arrow 2 first slightly to the left and then away from yourself until it engages in position B gt Place the notebook onto the Port Replicator 3 and ensure that it locks into place correctly Fujitsu Technology Solutions 73 Working with the notebook Connecting the mains adapter to the Port Replicator gt Connect the mains adapter cable to the DC jack DC IN of the Port Replicator 1 gt Connect the power cable to the mains adapter 2 gt Plug the power cable into the mains socket 3 When the notebook is connected to a Port Replicator the operating system creat
55. g 59 Memory expansion installing 86 removing 85 118 Memory module important notes 84 installing 86 removing 85 Microphone 61 Microphone connecting 81 Mobile operation 9 Module Removing 52 Module bay 51 Modules 51 Monitor connecting 78 drifting display 96 remains blank 96 Monitor port see VGA connection socket 78 N Notebook before you travel 9 cannot be started 97 cleaning 10 stops working 98 switching off 25 transporting 9 using 14 Notebook operation 14 Notebook switching on 17 Notes 8 boards 83 cleaning 10 disposal recycling 104 energy saving 8 LCD screen 28 Safety 8 transport 9 Num Lock indicator 38 Numeric keypad 36 see Virtual numeric keypad 38 O Operating system activating system protection 73 cancel system protection 73 protecting with password 73 Operating system language 26 Operating system restoring 94 Optical drive 53 Fujitsu Technology Solutions P Packaging 11 Password changing 73 entering 72 removing 73 Password protection 72 Peripheral devices connecting 77 disconnecting 77 Port Replicator Connecting a notebook 67 Ports 65 Portrait orientation screen 22 Ports Port Replicator 65 Power power consumption 57 power management features 57 Power on indicator 17 Preparing for operation 12 Printer does not print 98 R Rechargeable battery 46 see Battery 46 Regulatory information notebooks with radio device 109 Notebooks without radio device 105 Removing a data carr
56. gnition also allow you to write characters directly on the screen with the pen You can also use the pen as a drawing tool The notebook pen is retained securely in the pen slot This ensures that the pen cannot be lost regardless of whether you use the notebook as a Tablet PC or as a notebook or transport it while travelling Always replace the pen in its slot when you are not using it The notebook is supplied with a pen cord which you can attach to the eyelets on the pen and on the notebook Fujitsu Technology Solutions 37 Working with the notebook that were not specially designed for your notebook Replace the stylus tip if it Only use the pen provided with your notebook Do not use substitute pen tips is worn The warranty does not cover a scratched screen While writing you should take care not to scratch the surface of the display e g with a wristwatch or bracelet The pen of your notebook is an electronic instrument which can be damaged if used incorrectly Handle the pen with care The following list contains guidelines for proper pen handling Do not gesture with the pen Do not use the pen as a pointer Never use the pen on any other surface than the screen of your notebook Do not try to turn the thumb grip on the pen The thumb grip is used to place the pen in its slot and to take it out of the slot Never store the pen with the tip bearing the weight of the pen e g with the tip down in a pen hol
57. he LAN connections The network cable is not included in the delivery scope This type of cable can be obtained from a specialist dealer 70 Fujitsu Technology Solutions Working with the notebook Your Port Replicator The Port Replicator is only available for the LIFEBOOK T4410 The Port Replicator is a device that helps you to quickly connect your notebook to your peripheral devices such as a monitor printer etc The features offered by the Port Replicator include standard ports for monitor audio mouse and keyboard You need only dock the notebook in order to work with your peripheral devices Ports on the Port Replicator The Port Replicator is only available for the LIFEBOOK T4410 Fujitsu Technology Solutions 71 Working with the notebook USB ports 8 Device for adjusting the Port Replicator DVI port to the size of the notebook VGA monitor port 9 Connector on the Port Replicator for LAN port the docking port on the underside of the notebook 10 Release lever 11 ON OFF switch Headphone port Kensington Lock DC input connector DC IN 1 2 3 4 5 6 7 The notebook s HDMI connection cannot be used when the notebook is connected to the port replicator 72 Fujitsu Technology Solutions Working with the notebook Connecting the notebook to the Port Replicator If you connect the notebook to the Port Replicator during operation problems can occur We recommend that you switch of
58. he Set Supervisor Password field and press the Enter key With Enter new Password you are asked to enter a password Enter the password and press the Enter key Confirm new Password requires you to confirm the password Enter the password again and press the Enter key Changes have been saved is a confirmation that the new password has been saved To set the user password select Set User Password and proceed exactly as when configuring the supervisor password If you do not want to change any other settings you can exit BIOS Setup Utility In the Exit menu select the option Save Changes amp Exit Select Yes and press the Enter key The notebook will be rebooted and the new password will come into effect It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility Please note that the user password only provides access to a few of the BIOS settings Yv v vy CVV 78 Fujitsu Technology Solutions Security functions Changing the supervisor or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password gt Call the BIOS Setup Utility and go to the Security menu gt When changing the password proceed exactly as for password assignment Removing passwords To remove a password without setting a new password perform the following steps Start the BIOS Setup Utility and go to the Security me
59. ier 55 Removing memory see Adding memory 84 Return 37 S Safety notes 8 Screen no screen display 96 Screen port see VGA connection socket 78 Security functions 70 Select the language for handwriting recognition and keyboard 27 Select the language for menu texts 26 Selecting a location 12 Self discharge battery 47 Servicing 83 Setup see BIOS Setup Utility 91 Shift 37 Fujitsu Technology Solutions Index Shift key 37 Slot ExpressCard 59 Memory cards 58 Start key 38 Status indicators 14 Summer time 95 Supervisor password changing 73 entering 72 removing 73 Suspend Resume button 17 Switching on for the first time 13 Symbols indicators 14 System configuration 91 System expansion 84 see Adding memory 84 System settings BIOS Setup Utility 91 T Tab key 37 The radio connection to a network does not work 98 Time not correct 95 Time daylight savings 95 Tips 93 Toggle output screen 40 Touchpad 35 buttons 35 cleaning 10 dragging items 36 executing commands 35 moving the pointer 35 selecting an item 35 TPM 75 Transport Transport damage 11 Transportation 9 Travel notebook 9 Troubleshooting 93 Trusted Platform Module 75 U USB ports 80 User password changing 73 entering 72 removing 73 Using a Kensington Lock 71 119 Index Vv VGA connection socket 78 Video devices connecting 81 Virtual numeric keypad 38 Volume control 61 WwW Webcam 46 120 Weight Saver Removing 52 Wireless LAN
60. ility Select the Save Changes amp Exit option under Exit The notebook will reboot The system is no longer password protected ryryvy Fujitsu Technology Solutions 79 Security functions Using the security function of the tablet keys If you have assigned a supervisor password and or user password in the form of a combination of tablet button presses as described below you can enter this via the tablet buttons when starting your device Setting the Supervisor password gt Select Start Run gt Enter the following at the command line C Program Files Fujitsu Security Panel Application Supervisor FUJUSECS EXE gt Confirm with Enter gt Follow the instructions on the screen Setting the User password gt Select Start All Programs gt Select Security Panel Application Security Panel Application gt Follow the instructions on the screen Entering passwords using the tablet buttons The passwords to be entered via the tablet buttons are usually composed of a combination of button presses e g button 2 button 3 followed by button 1 and the ENT button gt Enter your password using the buttons 1 to 4 gt Confirm by pressing ENT Ly The device will be unlocked 80 Fujitsu Technology Solutions Security functions Trusted Platform Module TPM device dependent The followi
61. ion for your radio component gt If you wish to use your notebook during a flight first check with the flight attendants if it is OK to do so When travelling in other countries gt If you are travelling abroad check that the mains adapter can be operated with the local mains voltage If this is not the case obtain the appropriate mains adapter for your notebook Do not use any other voltage converter gt Check whether the local mains voltage and the power cable are compatible If this is not the case buy a power cable that matches the local conditions gt Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there see also CE marking Page 111 Notebook transporting Protect the notebook from severe shocks and extreme temperatures e g direct sunlight in a car If your device has an optical drive remove all data media e g CD DVD from the drives Switch the notebook off Unplug the mains adapter and all external devices from the power socket Disconnect the mains adapter cable and the data cables for all external devices Close the LCD screen To protect against damaging jolts and bumps use a notebook carrying case to transport your notebook vvvvvy Fujitsu Technology Solutions 15 Important notes Cleaning the notebook Do not clean any interior parts yourself leave this job to a s
62. irements and other relevant provisions of Directive 1999 5 EC Tested safety GS valid only for LIFEBOOK T4410 The device satisfies the requirements for the following directives EN60950 1 2006 DIN EN ISO 9241 307 2009 DIN EN ISO 9241 4 1999 DIN EN ISO 9241 9 2002 EK1 ITB 2000 2009 ZEK 01 2 08 2008 110 Fujitsu Technology Solutions Manufacturer s notes CE marking CE marking for devices with radio component This equipment complies with the requirements of Directive 1999 5 EC of the European Parliament and Commission from 9 March 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity This equipment can be used in the following countries Belgium Bulgaria Denmark Germany Estonia Finland France Greece UK Ireland Iceland Italy Latvia Liechtenstein Lithuania Luxembourg Malta The Norway Austria Netherlands Poland Portugal Rumania Sweden Switzerland Slovakia Slovenia Spain Czech Republic Hungary Cyprus Contact the corresponding government office in the respective country for current information on possible operating restrictions If your country is not included in the list then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country Regulatory notices If there is no FCC logo and also no FCC ID on the device then this device is not approved by the Federal Communications Commission FCC of the
63. ition 3 LIFEBOOK 14310 T4410 Operating Manual Innovative technology Ports and controls Important notes First time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer s notes Index 14 17 20 76 83 89 97 99 107 110 117 Microsoft MS Windows XP Windows Vista and Windows 7 are registered trademarks of the Microsoft Corporation Adobe Reader is a trademark of Adobe Systems Incorporated MultiMediaCard is a registered trademark of Infineon Technologies AG Sony and Memory Stick are registered trademarks of Sony Electronics Inc All other trademarks referenced are trademarks or registered trademarks of their respective owners whose protected rights are acknowledged Copyright Fujitsu Technology Solutions GmbH 2010 All rights reserved including rights of translation reproduction by printing copying or similar methods in part or in whole In the event of violations perpetrators will be liable to prosecution for damages All rights reserved including rights created by patent grant or registration of a utility model or design Subject to availability and technical modifications Contents Contents Innovative technology ccc cece cece eee eee eee eee eee e eee eee eee NGO 7 Further INFORMATION vaio aan Sie ra
64. ity functions Configuring password protection in BIOS Setup Utility Before using the various options for password protection in the BIOS Setup utility to increase data security please observe the following Make a note of the passwords and keep them in a safe place If you forget your supervisor password you will not be able to access your notebook Passwords are not covered by your warranty and a charge will be made for assistance Your password can be up to eight characters long and contain letters and numbers No distinction is made between uppercase and lowercase Protecting BIOS Setup Utility Supervisor and user password If you have opened these operating instructions on the screen we recommend that you print out the following instructions Because you cannot call the instructions onto the screen while you are setting up the password You prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the user password The supervisor password gives you access to all functions of the BIOS Setup Utility while the user password only provides some of the functions You can only set a user password if a supervisor password has already been assigned Please refer to the Settings in BIOS Setup Utility Page 97 section for a description of how to call up and operate the BIOS Setup Utility z Setting supervisor and user password Start the BIOS Setup Utility and go to the Security menu Select t
65. keyboard settings If you want to change the country and keyboard settings proceed as follows gt Enter the settings by clicking Start Settings Control Panel Time Regional and Language Options Key combinations The key combinations described below apply when using Microsoft Windows operating systems Some of the following key combinations may not function in other operating systems or with certain device drivers Key combinations are entered as follows gt Press the first key in the combination and keep it pressed gt While holding the first key down press the other key or keys in the combination Combination Switching the loudspeakers on off This key combination switches the integrated loudspeakers on and off Enable disable touchpad This key combination enables and disables the touchpad Decrease screen brightness This key combination decreases the brightness of the screen Increase screen brightness This key combination increases the brightness of the screen Decrease volume This key combination reduces the volume of the internal loudspeakers Increase volume This key combination increases the volume of the internal loudspeakers Fujitsu Technology Solutions 45 Working with the notebook Combination Toggle output screen F10 Use this key combination to select which screen s is are used for display if an external monitor is connect
66. l see Setting the pen Page 39 and Calibrating the pen Page 39 The notebook cannot be started The battery is not installed correctly The battery is dead The power adapter is not connected correctly Fujitsu Technology Solutions Troubleshooting Check whether the battery is installed correctly in its compartment Switch the notebook on Charge the battery gt Insert a charged battery gt Connect the mains adapter to the notebook Check whether the mains adapter is connected correctly to the notebook Switch the notebook on 103 Troubleshooting and tips The notebook stops working Troubleshooting Notebook is in energy saving mode gt Leave energy saving mode An application programme has caused the gt Close the application program or restart malfunction the notebook by restarting the operating system or switching the device off and back on again The battery is dead gt Charge the battery or gt Insert a charged battery or gt Connect the mains adapter to the notebook The printer does not print The printer is not switched on gt Make sure that the printer is switched on and ready for operation refer to the documentation supplied with the printer The printer is not connected correctly gt Check that the data cable connecting the notebook to the printer is properly connected The printer driver is faulty or not correctly gt Check that
67. mation for notebooks with radio device Federal Communications Commission statement This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the distance between the equipment and the receiver 3 Connect the equipment to an outlet on a circuit different from the one the receiver is connected to 4 Consult the dealer or an experienced radio TV technician for help Please
68. merical keypad is activated You can output the characters indicated on the upper right of the keys Caps Lock indicator Indicator is lit The Caps Lock key has been pressed All letters will be output as uppercase letters In the case of keys labelled several times the character printed on the upper left of the key will appear when that key is pressed Scroll Lock indicator Indicator is lit The key combination Fn Scr has been pressed The effect that this key has varies between applications Fujitsu Technology Solutions 21 Working with the notebook Opening the notebook gt Press the release button 1 and unfold the LCD screen upwards 2 22 Fujitsu Technology Solutions Working with the notebook Switching on the notebook gt Slide the ON OFF switch 1 to the right to switch on the notebook L gt The ON OFF switch returns automatically to its original position The power on indicator 2 lights Fujitsu Technology Solutions 23 Working with the notebook Programming the ON OFF switch You can program the ON OFF switch Operating system wens SS Windows XP Start Settings Control panel Performance and Maintenance Power options Advanced Windows Vista Start Settings Control panel Mobile PC Power options Windows 7 Start Settings Control panel System and Security Power options If you have assigned a password you must enter this when
69. ng description applies only to the LIFEBOOK T4410 To use the TPM you must activate the TPM in the BIOS Setup before the software is installed The condition for this is that you have assigned at least the supervisor password see Security functions Page 76 Options for using the TPM You can use the TPM in different ways SmartCase Logon SmartCase Logon offers additional help with managing and using the numerous passwords required to work with the computer To install configure and use SmartCase Logon please refer to the documentation and online help on the CD with the SmartCase Logon software Security API Smart Security API 4 1 is middleware which supports the entire range of mobile and stationary clients from Fujitsu Technology Solutions Independent of the TPM hardware it is needed by everyone who uses a PKI Smart Security environment for identification purposes Microsoft BitLocker BitLocker Drive Encryption BDE is a feature of Microsoft Vista Enterprise and Ultimate Editions for encryption of the hard disk drive Here BitLocker uses the TPM for the storage of the recovery data which are used for decryption of the partition It is also possible to use BitLocker without TPM and only to use the USB dongle for storing the crypto key This option is mainly of interest if Vista is installed on a computer on which TPM is not installed or an older version before Version 1 2 is installed For BitLocker
70. ng system Mono Windows XP Start Settings Control panel Power options Windows Vista Start Settings Control panel Hardware and Sound Power options Windows 7 Start Settings Control panel Mobile PC Power options The indicator is then displayed in the task bar as a battery symbol When you place the mouse pointer on the battery symbol the system displays the battery state of charge Please refer to the Help facility of the operating system for more information Battery storage Keep the battery pack between 0 C and 30 C The lower the temperature at which the batteries are stored the lower the rate of self discharge the battery charge level should be approx 30 To prevent exhaustive discharge which would permanently damage the battery check the level If you will be storing batteries for a longer period longer than two months of charge of the battery at regular intervals To be able to make use of the optimal charging capacity of the batteries the battery should be completely discharged and then fully recharged If you do not use the batteries for long periods remove them from the notebook Never store the batteries in the device Fujitsu Technology Solutions 53 Working with the notebook Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook Never use force when fitting or removing a battery Make sur
71. ng the FN tablet button you have a short time 2 to 3 seconds to press the second button Fujitsu Technology Solutions 51 Working with the notebook Programming the tablet buttons You can program the tablet buttons to open a specific application or execute a specific function when pressed Proceed as follows gt In Control Panel select the option to manage the settings for the tablet buttons and pen gt Follow the instructions on the screen and program the tablet buttons as you require Webcam Depending on the device version your device may have an integral Webcam with microphone Depending on the software used you can use your Webcam to take pictures record video clips or take part in web chats e The picture quality depends on the lighting conditions and the software being used e You can only operate the webcam with a particular application e g an Internet telephony program or a video conferencing program which supports a webcam When using the webcam the notebook support must not wobble The webcam automatically adjusts itself to the current light level For this reason the LCD screen may flicker while the light level is adjusted Further information on use of the webcam and additional settings can be found in the help function of the program which uses the webcam If you wish to carry out a function test with your webcam you can use the corresponding test software available at http ts fujitsu com sup
72. ning 10 Cursor control keys 38 Cursor keys 38 Fujitsu Technology Solutions Index D Date is incorrect 95 Declaration of conformity 104 Device setting up 12 Devices connecting 77 disconnecting 77 Display orientation selecting 22 DOC INDUSTRY CANADA NOTICES 107 Drive Removing 52 E Emergency removal of data carrier 55 Energy energy saving 8 Energy saving 8 Energy saving mode leaving 98 Enter 37 Enter key 37 Error message on the screen 99 Error messages on the screen 99 Errors Acoustic warnings 99 ESD 83 Ethernet LAN 64 ExpressCard 59 F Fault correction 93 Fingerprint sensor 71 configure 71 FireWire connecting devices 81 FireWire port 81 First time setup 11 Fn F10 40 Fn key 38 G Getting started 11 117 Index H Handling data carriers 54 Hard disk restoring the contents 94 Hardware configuration 91 HDMI port 79 I Important notes 8 Incorrect date time 95 Inserting a data carrier 55 K Kensington MicroSaver 71 Keyboard 36 cleaning 10 L Landscape orientation screen 22 Language operating system 26 Language selection 26 LCD screen cleaning 10 difficult to read 96 notes 28 reflected glare 96 remains blank 95 LCD screen is too dark 95 Life battery 46 Line feed 37 Loudspeakers 61 M Main memory see Adding memory 84 Mains adapter connecting 12 setting up 12 Manual removal of data carrier 55 Mechanical backup 71 Memory card handling 58 inserting 58 removin
73. nit save weight Only use modules designed for your notebook Do not use force when installing or removing the module Make sure that no foreign objects enter the module bay You can swap modules during operation This means you do not need to switch off the notebook To replace a module simply click on the corresponding icon in the task bar and then on Exit or Select Exit The module can now be removed without any further actions being necessary Fujitsu Technology Solutions 57 Working with the notebook Removing a module gt Press the unlocking lever in the direction of the arrow gt Now pull the module out of the module bay Fujitsu Technology Solutions 58 Working with the notebook Installing a module gt Place the module into the module bay so that the contacts enter first gt Push the module into the module bay until you feel it locking into place Optical drive This product contains a light emitting diode classified in accordance with IEC 8251 1993 LASER CLASS 1 and must therefore not be opened Fujitsu Technology Solutions 59 Working with the notebook Handling data carriers Observe the following guidelines when handling data carriers e Avoid touching the surface of a data carrier Only handle data carriers by their edges Always store data carriers in their cases This will protect the data carrier against being covered in dust scratched or damaged in any other way
74. nology Solutions Working with the notebook Security functions Security button 4 to enter the password Security button 1 to confirm the entered password Detailed information on how to use the security functions is contained in Section Using the security function of the tablet keys Page 80 Functions during Windows log on When the Windows log on dialog is displayed the tablet buttons provide special functions Enter key Change screen orientation When you press the Orientation button the orientation of the screen display changes from portrait vertical to landscape horizontal or vice versa When you would like to use the Tablet PC as an eBook for example you would use the portrait orientation When accessing spreadsheets you would more typically use a landscape orientation Fujitsu Technology Solutions 49 Working with the notebook 50 key see Key combinations Page 51 Log on to the system or open the Windows Task Manager If you hold this tablet button down for two seconds you can log back on to the system again after system startup e after a system lock when returning from power management After log on pressing the tablet button for two seconds launches the Windows Task Manager or in the network opens the security window Fujitsu Technology Solutions Working with the notebook Key combinations Key combinations cannot be changed You c
75. note the following regulatory information related to the optional radio device FCC Radio Frequency Exposure statement This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2 1091 2 1093 and 15 247 b 4 addressing RF Exposure from radio frequency devices The radiated output power of this radio device is far below the FCC radio frequency exposure limits Nevertheless this device shall be used in such a manner that the potential for human contact during normal operation is minimized When using this device a certain separation distance between antenna and nearby persons must be maintained to ensure RF exposure compliance In order to comply with RF exposure limits established in the ANSI C95 1 standards the distance between the antennas and the user should not be less than 20 cm 8 inches Regulatory Notes and Statements Radio device health and authorisation for use Radio frequency electromagnetic energy is emitted from the wireless devices The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones Radio devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations The use of the radio devices may be restricted in some situations or environments such as On board an airplane or
76. ns 80 Setting the User password ccc cect nde eee eee 80 Entering passwords using the tablet buttons 0 0 c cee 80 Trusted Platform Module TPM device dependent 0 e cece eee eee eee eee 81 Enabling TP Mesta cath eed oe ne a AA a Maa dune AA tds 82 Disabling TP Mccain reversed E 82 Connecting external devices oooccoccccccccnccnnn eee eee eee eee e eee eeeeee 83 A Fujitsu Technology Solutions Contents Connecting an external monitor 0 00 cece cee eee eee eet eee 84 HDMI Porte oye etek AE EE E E EE EE ES 85 Connecting USB devices occcoccccccccccn e ranna enn nannan 86 How to remove USB devices correctly 000 c cece eee aee 86 Connecting FireWire devices 0 eee rnnr teen eens 87 Connecting external audio devices 0 cece ee ete eens 87 Microphone port Line In 0 0 ete e eae 87 Headphone port a Ferree teh ALiA RA Aa eee dost tc rat 88 Removing and installing components during servicing 00ceeeeeeeee eee eens 89 Notes on installing and removing boards and components 00 0eeeeeee eee nnna 89 Preparing to remove components 00 cece eee eee eee ete eee 90 Installing and removing memory expansion 00 cece teen eee 90 REMOVINAD A COVE E Seal a eee ee ooh tai 91 Removing memory modules 00000 eee eee ene eee eee ete teenie 91 Installing a memory module 0 cece eee
77. ntion to the additional safety notes for devices with wireless components provided in the Safety manual Please refer to the notes in the chapter Removing and installing components during servicing Page 89 This notebook complies with the relevant safety regulations for data processing equipment If you have questions about using your notebook in a particular area please contact your sales outlet or our Hotline Service Desk Energy saving Switch the notebook off when it is not in use Switch off external connected devices if you are not using them If you use the energy saving functions the notebook uses less energy You will then be able to work for longer before having to recharge the battery Energy efficiency is increased and the environmental impact is reduced You save money while protecting the environment Energy saving under Windows gt Make use of the power management features see Using the power management features Page 63 14 Fujitsu Technology Solutions Important notes Travelling with your notebook Please observe the points listed below when travelling with your notebook Before you travel gt Back up important data stored on your hard disk gt Switch off the radio component for data security reasons With data traffic via a wireless connection it is also possible for unauthorised third parties to receive data Information on activating data encryption is provided in the documentat
78. nu Highlight the Set Supervisor Password or Set User Password field and press the Enter key You will be requested to enter the current password by the Enter Current Password prompt You will be requested to enter a new password by the Enter New Password prompt Press the Enter key twice In the Exit menu select the option Save Changes amp Exit Select Yes and press the Enter key The notebook will now reboot with the password removed Removing the supervisor password simultaneously deactivates the user password rvv ryvy Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility see section Setting supervisor and user password Page 78 you can also prevent booting of the operating system Activating system protection Start the BIOS Setup Utility and go to the Security menu Select the Password on Boot option and press the Enter key Select the desired option Disabled First Boot or Every Boot and press the Enter key Select the Save Changes amp Exit option under Exit The notebook will reboot You will be prompted to enter your password the supervisor password ryvvy Deactivating system protection Start the BIOS Setup Utility and go to the Security menu Select the Password on Boot option and press the Enter key Select the Disabled option and press the Enter key If you do not want to change any other settings you can exit BIOS Setup Ut
79. ok Removing the card Always remove the card according to the rules described below to ensure that none of your data is lost You can stop the card using the corresponding icon in the task bar gt Left click on the icon to safely remove hardware located in the taskbar gt Select the card you want to stop and remove gt Press the Enter key L Wait for the dialog box which tells you that it is now safe to remove the card gt If the eject button is lowered you must first cause the eject button to release from the notebook casing To do this press the eject button until it pops out Press the eject button 1 so that the card protrudes a little from the notebook lt A gt Pull the card out of the slot 2 gt Insert the card placeholder into the slot guide gt Carefully slide the placeholder for the card as far as it will go into the slot Do not use excessive force Loudspeakers and microphones Information on the exact position of the speakers and microphone can be found in Ports and controls Page 9 Please refer to chapter Key combinations Page 45 for information on setting the volume and also enabling disabling the loudspeakers using key combinations If you attach an external microphone the built in microphone is disabled When you connect headphones or external speakers the built in speakers are disabled Information on connecting headphones and a microphone can be found in Conne
80. ok Touchpad and touchpad buttons Keep the touchpad clean Protect it from dirt liquids and grease Do not use the touchpad if your fingers are dirty Do not rest heavy objects e g books on the touchpad or the touchpad buttons 1 Touchpad 2 Touchpad buttons The touchpad enables you to move the mouse pointer on the screen The touchpad buttons allow you to select and execute commands They correspond to the buttons on a conventional mouse You can use a key combination to disable the touchpad to avoid accidentally moving the pointer on the screen see also Key combinations Page 45 Moving the pointer gt Move your finger on the touchpad L gt The pointer will move Selecting an item gt Move the pointer to the item you wish to select gt Tap the touchpad once or press the left button once L The item is selected Executing commands gt Move the pointer to the field you wish to select gt Tap the touchpad twice or press the left button twice L The command is executed Fujitsu Technology Solutions 41 Working with the notebook Dragging items gt Select the desired item gt Press and hold the left button and drag the item to the desired position with the finger on the touchpad L The item will be moved Switching the Touchpad on and off You can switch the Touchpad on and off using a key combination see Key combinations Page 45 Keyboard The keyboard of your notebook
81. olutions 91 Removing and installing components during servicing Installing a memory module Memory bank O must always be loaded gt Insert the memory module with the contacts and the recess a facing the slot 1 gt Carefully push the memory module downwards until you feel it click into place 2 Place the cover into position following the direction of the arrow 1 Secure the cover with the screws 2 Install the battery again see Removing and installing the battery Page 54 Turn the notebook the right way up again and place it on a flat surface Reconnect the cables that were previously disconnected vvvvyv 92 Fujitsu Technology Solutions Removing and installing components during servicing Removing and installing the hard disk Removing a cover e Requirement The dust chamber cover is removed see Removing and fitting the dust removal cover ventilation slot cover Page 62 gt Remove the screws 1 the same time store the screws for the individual components separate from each Keep the screws in a safe place If you are removing more than one component at other If you install the wrong screws components may be damaged gt Slide the cover in the direction of the arrow 2 and lift it away from the notebook Fujitsu Technology Solutions 93 Removing and installing components during servicing Removing a hard disk gt Remove the
82. ook Status displays Power on indicator D e Indicator is illuminated The notebook is switched on e Indicator flashes The notebook is in sleep mode Save to RAM The indicator is not illuminated The notebook is switched off or in Save to Disk mode Power supply indicator Indicator is illuminated The mains adapter is supplying power to the notebook Drive indicator y Indicator is illuminated The hard disk drive or the CD DVD in the optical drive of the notebook is being accessed Battery charging indicator gt 1 This description applies to both batteries The battery charging indicator shows whether a battery is installed and being charged 1 Battery indicator This description applies to both batteries 2 The battery indicator shows the state of charge of the installed battery Indicator is lit blue The battery is between 50 and 100 charged The indicator is lit orange The battery is between 13 and 49 charged The indicator is lit red The battery is between 0 and 12 charged The indicator flashes orange The battery state of charge is being checked for four seconds after battery installation The indicator flashes red The battery is faulty The indicator is not lit There is no battery installed Note If you use batteries with a capacity of 5800 mAh you can also check the charge condition on the battery itself Num Lock indicator Indicator is lit The Num key has been pressed The virtual nu
83. our service temporarily If possible they will notify you in advance If advance notice is not practical they will notify you as soon as possible You will also be advised of your right to file a complaint with the FCC This fax modem also complies with fax branding requirements per FCC Part 68 Your telephone company will probably ask you to disconnect this equipment from the telephone network until the problem is corrected and you are sure that the equipment is not malfunctioning This equipment may not be used on coin operated telephones provided by your telephone company Connection to party lines is subject to state tariffs Contact your state s public utility commission public service commission or corporation commission for more information This equipment includes automatic dialing capability When programming and or making test calls to emergency numbers e Remain on the line and briefly explain to the dispatcher the reason for the call Perform such activities in off peak hours such as early morning or late evening FCC rules prohibit the use of non hearing aid compatible telephones in the following locations or applications All public or semi public coin operated or credit card telephones Elevators highways tunnels automobile subway railroad or pedestrian where a person with impaired hearing might be isolated in an emergency e Places where telephones are specifically installed to alert emergency authorities such as
84. porti Rechargeable battery When not plugged into a mains socket the notebook runs on its built in battery You can increase the life of the battery by caring for the battery properly The average battery life is around 500 charge discharge cycles You can extend the battery life by taking advantage of the available energy saving functions 52 Fujitsu Technology Solutions Working with the notebook Charging caring for and maintaining the battery The notebook battery can only be charged when the ambient temperature is between 5 C and max 35 C You can charge the battery by connecting the notebook to the mains adapter see Mains adapter connecting Page 18 You can increase the life of your battery by allowing it to fully discharge before recharging it again To do this leave your notebook turned on while operated by the battery Once the battery is running low you will hear a warning alarm If you do not connect the mains adapter within five minutes of the warning alarm described above sounding your notebook will automatically switch off monitoring the battery charging level Windows also has a Battery status meter in the taskbar for monitoring the battery capacity When you place the mouse pointer on the battery symbol the system displays the battery status The battery capacity can be monitored using an indicator which shows the current state of charge Use the following menu to enable this feature Operati
85. ra dann a DAMS a AA a Ca 7 Notational conventions siii AA AA kb eae ba aidd 8 Ports and CONtKONS iii a is jajajaa 9 Important notes ici sr AA da 14 Safety notes HA A AAA A ee oe OE DDE 14 Energy SAVING aaa toas 14 Energy saving under Windows 0c cece eee eee eee nett enna 14 Travelling with your notebook occcccoccccccccccr eee eee eens 15 Before you travel 2 cece een tenet tenet teens 15 Notebooki transporting s iesse nad ar E aerea arene 15 Cleaning the notebook aii mani aa eed a E te Pegg A AARE E AE oe bbe E D E E 16 First time setup of your device o occccccocccccccnn eee eee eee 17 Unpacking and checking the device 6 eee teen eee 17 Selecting a location A Rene a pp e se 18 Mains adapter Connecting sesia disisit ere pa NANAREN A Aang ants en ios acl NNNNA 18 Switching on the device for the first time 00 es 19 Working with the notebook ooccoocccccccnnnnc eee eee eens 20 Status ANA CAOS jon ksh E AEEA eae eae o beter ea 20 Opening the notebook cece ceed nee eens 22 Switching on the notebook oe ericcson eee A E 23 Programming the ON OFF switch 0 ccc cece eect eee eee enna 24 Different ways to use your notebook 00 cece een eee 24 From notebook to Tablet PC caidas ado ata sea Sy Eg WR ole alten acia aa aaae 25 Select display orientation portrait or landscape orientation 00cee eee eee 28 From Tablet PC to
86. re your system from unauthorised access This chapter explains how to use each function and what the benefits are Please remember that in some cases for example forgetting your password you may be locked out and unable to access your data Therefore please note the following information Make regular backups to external storage devices such as external hard drives CD or DVD disks Some security functions need you to choose passwords Make a note of the passwords and keep them in a safe place If you forget your passwords you will need to contact the our Service Desk Deletion or resetting of passwords is not covered by your warranty and a charge will be made for assistance Brief overview of security functions Detailed information about the security equipment of your device can be found in the Professional Notebook manual on the Drivers amp Utilities CD DVD or on our website at http ts fujitsu com support Fit and lock Kensington Security functions Type of protection Fingerprint sensor depending Biometric on the device BIOS password protection Boot from removable media Owner Information Trusted Platform Module device dependent 76 Password protection for BIOS Setup operating system and hard disk with supervisor and user password The passwords consist of a maximum of eight alphanumeric characters Prevents unauthorised booting of an operating system from external media e g USB
87. rrect Submenu and Ia PEC Settings Keyboard controller error gt Switch the notebook off with the ON OFF switch gt Wait 3 5 seconds and switch on the notebook again Keyboard error If you are using an external keyboard gt Check the connection and reboot the notebook nn Stuck key gt Make sure that no key is pressed Operating system not found gt Check in the BIOS Setup whether your hard disk has been set correctly gt Make sure that the operating system is installed on the corresponding drive Press lt F1 gt to resume lt F2 gt to SETUP gt Press the F This error message appears if an error occurs during the self test before starting the operating Press the function key F2 to access the system BIOS Setup Previous boot incomplete Default configuration gt Press the used Due to an error during the previous system to do so boot default values were used for certain settings Check the settings in the BIOS Setup function key to start the operating system function key when prompted Real time clock error gt Contact your sales outlet or our customer service centre nnnnK Shadow RAM failed at offset xxxx Failing Contact your sales outlet or our customer Bits zzzz service centre System battery is dead Replace and run SETUP gt Contact your sales outlet or our customer service centre System cache error Cache disabled gt
88. settings in the BIOS Setup Utility gt If you want to exitB OS Setup Utilitywith these settings select Exit Saving Changes and Yes Save Changes save changes without exiting the BIOS Setup Utility To save the changes select Save Changes and Yes L gt The changes are saved You can now make additional settings in the BIOS Setup Utility gt If you want to exit BIOS Setup Utility with these settings choose Exit Saving Changes and Yes Save Changes and Power Off To save the changes and switch off your device select Save Changes and Power Off and Yes L gt The changes are saved Your device is shut down 98 Fujitsu Technology Solutions Troubleshooting and tips Troubleshooting and tips Refer to the safety information in the Safety manual when connecting or disconnecting cables If a fault occurs try to correct it as described If you fail to correct the problem proceed as follows gt Make a note of the steps and the circumstances that led to the fault Also make a note of any error messages displayed gt Switch the notebook off gt Please contact the Hotline Service Desk You can find the telephone numbers in the service desk list Please have the following information ready when you call The model name and serial number of the notebook The serial number is located on a sticker on the underside of the notebook Notes of any messages that appear on the screen and information on acoustic signals
89. st time the supplied software is installed and configured Because this procedure must not be interrupted you should set aside enough time for it to be fully completed and connect the device to the mains using the mains adapter During the installation process DO NOT restart the device unless you are requested to do so To make it easier to use your device for the first time the operating system is pre installed on the hard disk gt Slide the ON OFF switch 1 to the right to switch on the notebook L The ON OFF switch returns automatically to its original position gt During installation follow the instructions on screen If a Windows operating system is installed on your device you will find more information on the system and drivers help programmes updates manuals etc on the device or on the Internet at http ts fujitsu com support Fujitsu Technology Solutions 19 Working with the notebook Working with the notebook This chapter describes the basics for operating your notebook Please read the chapter entitled Connecting external devices Page 83 for instructions on how to connect devices such as a mouse and a printer to the notebook Please refer to the notes in Important notes Page 14 Status indicators The status indicators provide information about the status of the power supply the drives and the keyboard functions etc 20 Fujitsu Technology Solutions Working with the noteb
90. stick USB CD ROM drive etc Overlay service desk or owner information during the boot process Identification and authentication of the notebook MicroSaver accessory Install the supplied fingerprint software Specify at least one supervisor password in the BIOS Setup and activate the password protection for the operating system and hard disk as desired In the BIOS Setup go to the Security menu and edit the option Boot from Removable Media In the BIOS Setup go to the Security menu and edit the option Owner Information Define a supervisor password in the BIOS Setup and enable the TPM Security Chip Fujitsu Technology Solutions Security functions Configuring the fingerprint sensor Whether or not your device has a fingerprint sensor depends on the device configuration you have ordered The fingerprint sensor can record an image of a fingerprint With additional fingerprint software this image can be processed and used instead of a password gt You must install the fingerprint software in order to be able to use the fingerprint sensor 1 Use Kensington Lock Your device comes with a Kensington Lock device for the Kensington MicroSaver With the Kensington MicroSaver a sturdy steel cable you can help protect your notebook from theft The Kensington MicroSaver is available as an accessory Fit the Kensington MicroSaver on the A o Fujitsu Technology Solutions 77 Secur
91. t be exported or transferred from the US or Canada without an approved US Department of Commerce export license This device complies with Part 15 of FCC Rules as well as ICES 003 B NMB 003 B Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesirable operation Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user s right to operate this equipment 116 Fujitsu Technology Solutions Index A A beep sounds every second 95 Acoustic error messages 99 Anti theft protection 71 Audio devices connecting 81 Audio ports 81 82 B Backspace 37 Bass loudspeaker subwoofer 61 Battery battery life 46 caring for and maintaining 47 charge level 47 57 charging 47 self discharge 47 storage 47 Battery status meter 47 Battery discharges too quickly 99 BIOS Setup Utility calling 91 exiting 92 operating 91 protecting with password 72 settings 91 Bluetooth Switching off module 63 Switching on module 63 Board 83 Buffer battery load 95 Buttons 36 Cc Caps Lock 37 CD DVD indicator 54 CD DVD manual emergency removal 55 CE marking 105 Charging capacity battery 47 Cleaning 10 Components installing removing 83 Configuration BIOS Setup Utility 91 Connecting audio devices 81 82 Connecting headphones 82 Crystal View display clea
92. t switched on Various messages can appear The display may remain dark for a short time or may flicker Please follow the instructions on the screen NEVER switch off your device during the first time setup process On delivery the battery can be found in the battery compartment or in the accessories kit The battery must be charged if you want to operate your device using the battery When used on the move the built in battery provides the device with the necessary power You can increase the operating time by using the available energy saving functions For instructions on how to connect external devices e g mouse printer to your device please refer to the operating manual for your device Unpacking and checking the device Should you discover any damage that occurred during transportation AN notify your local sales outlet immediately gt Unpack all the individual parts gt Check your device for any visible damage which may have occurred during transportation You may need the packaging in the future if you need to transport your device Fujitsu Technology Solutions 17 First time setup of your device Selecting a location A Select a suitable location for the device before setting it up Follow the instructions below when doing so Never place the device or the mains adapter on a heat sensitive surface The surface could be damaged as a result Never place the device on a soft surface e g carpeting uphols
93. t the device which you want to shut down and remove Press the Enter key Wait for the dialogue box which tells you that it is now safe to remove the device ryvy 86 Fujitsu Technology Solutions Connecting external devices Connecting FireWire devices External devices such as digital audio video devices or other high speed devices can be connected to the FireWire port The FireWire port operates at a speed of up to 400 Mbit per second FireWire devices are hot pluggable Therefore the cables of FireWire devices can be connected and disconnected with the system switched on Additional information is provided in the documentation for the FireWire devices gt Connect the data cable of the external devices to the FireWire port of the notebook gt Plug the power cable of the external device into the mains socket Connecting external audio devices Microphone port Line In The microphone port Line In allows you to connect an external microphone a MiniDisc player MP3 player CD player or a tape deck to your notebook gt Connect the audio cable to the external device gt Connect the audio cable to the microphone port Line In of the notebook Fujitsu Technology Solutions 87 Connecting external devices Headphone port You can connect headphones or external loudspeakers to your notebook via the headphone port gt Connect the audio cable to the external device gt Connect the audio cable to the h
94. ter en une combinaison quelconque de dispositifs la seule condition que la somme d indices d quivalence de la sonnerie de tous les dispositifs n exc de pas 5 AVERTISSEMENT Pour assurer la s curit les utilisateurs doivent v rifier que la prise de terre du service d lectricit les lignes t lphoniques et les conduites d eau m talliques sont connect es ensemble Les utilisateurs NE doivent PAS tenter d tablir ces connexions eux m mes mais doivent contacter les services d inspection d installations lectriques appropri s ou un lectricien Ceci peut tre particuli rement important en r gions rurales UL Notice This unit requires an AC adapter to operate Only use a UL Listed Class 2 adapter The correct output rating is indicated on the AC adapter label Refer to the illustration below for the correct AC Adapter output polarity e CAUTION To reduce the risk of fire use only 26AWG or larger telecommunications line cord gt gt For Authorized Repair Technicians Only CAUTION For continued protection against risk of fire replace only with the same type and rating fuse WARNING Danger of explosion if Lithium CMOS battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer gt gt Dispose of used batteries according to the manufacturer s instructions 114 Fujitsu Technology Solutions Manufacturer s notes FCC Regulatory infor
95. tered furniture bed This can block the air vents and cause overheating and damage The underside of the device heats up during normal operation Prolonged contact with the skin may become unpleasant or even result in burns Place the device on a stable flat non slippery surface Please note that the rubber feet of the device may mark certain types of delicate surfaces Keep other objects at least 100 mm away from the device and its mains adapter to ensure adequate ventilation Never cover the ventilation slots of the device Do not expose the device to extreme environmental conditions Protect the device from dust humidity and heat Mains adapter connecting Observe the safety precautions in the enclosed Safety manual 18 The supplied power cable conforms to the requirements of the country in which you purchased your device Make sure that the power cable is approved for use in the country in which you intend to use it gt Connect the power cable 1 to the mains adapter gt Plug the mains cable 2 into a mains outlet gt Connect the mains adapter cable 3 to the DC jack DC IN of the device Fujitsu Technology Solutions First time setup of your device Switching on the device for the first time On devices with ON OFF switch for wireless components Slide the ON OFF switch for wireless components to the ON position before switching on the device When you switch on the device for the fir
96. the data cable connecting installed or it is the wrong printer driver the notebook to the printer is properly connected gt Check whether the correct printer driver is loaded refer to the printer documentation The radio connection to a network does not work The wireless component is disabled gt Switch the radio component on see Switching the wireless components on and off Page 69 The wireless component is enabled Despite gt Check whether the radio connection is this the wireless connection to a network does switched on via the software not work gt Further information on using the radio component can be found in the help files 104 Fujitsu Technology Solutions Troubleshooting and tips The battery discharges too quickly The battery is either too hot or too cold In this case the battery indicator flashes You may have an application running that consumes a great deal of power due to frequent accessing of the hard disk or optical drive The maximum brightness may have been set for the screen Acoustic warnings Cause gt Bring the notebook up down to a normal temperature again gt If the operating time of the battery life is extremely short the battery is probably too old Replace battery if necessary Use the mains adapter as frequently as possible Set the screen slightly darker with the key combination for Decreasing the screen brightness in order to reduce the amount o
97. the external monitor if it is plugged in with a connector gt Switch on the external monitor and the notebook The external monitor is blank or the image is unstable The wrong external monitor has been selected Terminate the application program in or the wrong screen resolution has been set for Windows by pressing Alt F4 If the the application program fault persists after closing the program use the key combination for switching the screen output see Key combinations Page 45 to switch over to the notebook s LCD screen Change the following setting Set the screen resolution Set the screen resolution as described in the documentation for your operating system Select monitor Select monitor 1 or 2 as described in the documentation for your operating system 102 Fujitsu Technology Solutions Troubleshooting and tips The cursor does not correctly follow the pen movements Cause Fault elimination Pen incorrectly calibrated Windows XP gt Calibrate the pen as shown under Tablet and Pen Settings in the Control Panel see Setting the pen Page 39 and Calibrating the pen Page 39 Windows Vista gt Calibrate the pen as shown under Tablet PC Settings in the Control Panel see Setting the pen Page 39 and Calibrating the pen Page 39 Windows 7 gt Calibrate the pen as shown under Hardware and Sound Tablet PC Settings in the Control Pane
98. the user should ensure that it is permissible to connect this equipment to the local telecommunication facilities The user should be aware that compliance with the certification standards does not prevent service degradation in some situations Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line NOTICE The Ringer Equivalence Number REN for this terminal equipment is 0 0 The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five CAUTION For safety users should ensure that the electrical ground of the power utility the telephone lines and the metallic water pipes are connected together Users should NOT attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician This may be particularly important in rural areas Avis Aux Utilisateurs Du R seau T l phonique Canadien AVIS Le pr sent mat riel est conforme aux sp cifications techniques
99. tp ts fujitsu com Names of CDs DVDs and titles or designations of other materials e g CD DVD Drivers amp Utilities or Safety Manual indicates a key on the keyboard e g F10 This font indicates terms and texts that are emphasised or highlighted e g Do not switch off the device 8 Fujitsu Technology Solutions Ports and controls Ports and controls This chapter presents the individual hardware components of your device It gives an overview of the displays and connections of the device Please familiarise yourself with these components before you start to work with the device 1 Webcam 10 FireWire port 2 Tablet buttons 11 Earphone and loudspeaker port 3 ON OFF switch 12 Status indicators 4 Ambient light sensor 13 Touchpad 5 Status indicators 14 Loudspeakers 6 Keyboard 15 Fingerprint sensor 7 Touchpad buttons 16 LCD screen for use with the pen and 8 Memory card slot with TouchScreen functionality 9 ON OFF switch for wireless components Fujitsu Technology Solutions 9 Ports and controls I DC input connector DC IN 3 USB port ExpressCard slot Eject button for ExpressCard N I A I 10 Fujitsu Technology Solutions Ports and controls 1 Kensington Lock 4 VGA monitor port 2 USB ports 5 LAN port 3 HDMI port Fujitsu Technology
100. tructions on the screen After the installation you must install all the drivers again Some installed hardware components will not be correctly supported until this has been done gt Insert the Drivers amp Utilities CD DVD into the optical drive The CD starts automatically gt Click on the Desk Update button gt Select Automatic driver installation Express and click on Start installation gt Follow the instructions on the screen gt Restart your notebook when the driver installation is completed 100 Fujitsu Technology Solutions Troubleshooting and tips The notebook s date or time is incorrect Cause Troubleshooting Time and date are incorrect gt With the B OS Setup Utility you can set the date and time in the main menu If the date and time are repeatedly incorrect when you switch on the notebook the built in battery that supplies the internal clock has failed gt Please contact your sales outlet or our Hotline Service Desk Battery indicator does not illuminate Fault elimination The battery is not installed correctly Switch the notebook off Check whether the battery is installed correctly in its compartment Switch the notebook on The battery is fully discharged Charge the battery gt Install a charged battery gt Connect the notebook to a mains outlet using the mains adapter When certain characters are entered on the keyboard only numerals are written Troubleshooting Th
101. tsu Technology Solutions 29 Working with the notebook Note the direction of rotation in the following description No guarantee claims can be met for damage caused by turning in the wrong direction gt Hold the display on both sides as far down as possible and then turn the display It turns easily and without resistance gt Turn or move the display further until it has turned 180 and the hinge latches in 30 Fujitsu Technology Solutions Working with the notebook gt To be able to shut the notebook again rotate the hook from position 1 to position 2 Switching off the notebook gt Close all applications and then shut down the operating system please see the Operating System Manual gt Slide the ON OFF switch towards the right L gt The ON OFF switch returns automatically to its original position Fujitsu Technology Solutions 31 Working with the notebook Closing the notebook gt Fold the LCD screen down onto the lower part of the notebook until you feel it lock into place Language selection Windows XP only Your notebook is supplied with the Windows XP Tablet PC 2005 Edition operating system as a single or multi language version according to your preference In the single language version you are presented with two handwriting recognition input areas one for the operating system language and one for English In the multi language version you have the option of se
102. tting the language of the menu texts and the keyboard as well as that of the handwriting recognition With the multi language models the default language set for the menu texts keyboard and handwriting recognition is English Selecting the language for menu texts gt Click on Control Panel Date Time Language and Regional Options Language and Regional options gt Select the desired language on the Regional Options tab 32 Fujitsu Technology Solutions Working with the notebook Selecting the language for handwriting recognition and keyboard Click on Control Panel Date Time Language and Regional Options Language and Regional options Select the Languages tab In the Text services and input languages field click on the Details button In the next dialog window select the Settings register card and click the Add button in the Installed Services field In the next dialog window select the desired Input area schema You can now decide which functions keyboard layout handwriting recognition etc the selected input area schema is to be activated for gt Mark the desired functions and then confirm your entries by clicking the OK button L gt You will find further information in the Windows XP Tablet PC 2005 Edition operating system help Yvy rv Handwriting recognition under Windows Vista Handwriting recognition under Windows Vista currently supports the following languages English German
103. ujitsu Technology Solutions 27 Working with the notebook Select display orientation portrait or landscape orientation Sie haben die Wahl ob Sie den Bildschirm im Hochformat oder Querformat verwenden m chten Zum Umschalten von der einen zur anderen Bildschirmausrichtung dr cken Sie die Tablet Taste Fn The display switches automatically to portrait layout when the device is used as a Tablet PC and to landscape layout when it is used as a notebook A 28 Windows XP You can change these settings in the Fujitsu menu or under Start Settings Control Panel Tablet and Pen Settings Windows Vista You can change these settings in the Fujitsu menu or under Start Settings Control Panel Mobile PC Tablet PC Settings Windows 7 You can change these settings in the Fujitsu menu or under Start Settings Control Panel Hardware and Sound Display Settings Profiles for operating in different screen orientations are found under Fujitsu Tablet Control in the Fujitsu menu These profiles have preset standard configurations that can be modified as desired These settings not only affect the monitor settings on the Tablet PC but also any external monitors that may be connected Fujitsu Technology Solutions Working with the notebook From Tablet PC to notebook gt Press the release button 1 and unfold the LCD screen upwards 2 gt Open the display until it is in the vertical position Fuji
104. wer supply see Preparing to remove components Page 90 Only use memory expansion modules that have been approved for your notebook see Technical data Page 107 Never use force when installing or removing a memory extension Make sure that foreign objects do not fall into the memory extension compartment You must open the service compartment to remove or install a memory module On some devices opening the compartment may expose other components These components should be removed and replaced only by authorised specialists Therefore be sure to observe the following recommend that you wait one hour after switching off the notebook before removing Individual components can become very hot during operation Therefore we or installing memory modules Otherwise there is a risk of suffering burns As some components are exposed that are sensitive to static electricity please take note of chapter Notes on installing and removing boards and components Page 89 90 Fujitsu Technology Solutions Removing and installing components during servicing Removing a cover gt Remove the screws 1 gt Pull off the cover from the notebook in the direction of the arrow 2 Removing memory modules gt Carefully push the two mounting clips outwards 1 L The memory module snaps upwards 2 gt Pull the memory module out of its slot in the direction of the arrow 3 Fujitsu Technology S
105. your notebook and all external devices 2 Unplug your notebook and all devices from the mains sockets 3 Disconnect the cables for your external devices following the instructions Fujitsu Technology Solutions 83 Connecting external devices Connecting an external monitor You can connect an external monitor to the analogue VGA monitor connection of the notebook Screen output is limited to a maximum of two screens at any one time see Key combinations Page 45 section Toggle output screen Analogue VGA monitor connection socket gt Switch off the notebook and the external monitor gt Connect the data cable of the external monitor to the monitor port of the notebook gt First switch on the external monitor and then the notebook You can also use a key combination to switch back and forth between the external monitor and the notebook s LCD screen see chapter Key combinations Page 45 You can display the same picture on the external monitor and the notebook LCD screen simultaneously 84 Fujitsu Technology Solutions Connecting external devices HDMI port Depending on the device version your device may have an integral HDMI port The HDMI port of your notebook can be used to connect an external amplifier LCD TV or a plasma TV with an HDMI connection gt Connect the data cable to the external device gt Connect the data cable to the HDMI xz HDMI port of the notebook Some LCD
106. your notebook while it is in a power saving mode If the built in battery is nearly flat close the open files and do not go into power saving mode If you do not intend to use your notebook for a long period of time gt Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook gt Close all opened programs and completely shut down the notebook Fujitsu Technology Solutions 63 Working with the notebook Memory cards Your notebook is equipped with an integrated memory card reader Observe the manufacturer s instructions when handling the memory cards Supported formats It supports the following formats e Secure Digital SD card Memory Stick Memory Stick Pro Inserting the memory card gt Carefully slide the memory card into the slot The label should be facing upward Do not apply excessive force as otherwise the delicate contact surfaces could be damaged L gt Depending on the particular type used the memory card may protrude slightly from the slot 64 Fujitsu Technology Solutions Working with the notebook Removing the memory card In order to protect your data always follow the correct procedure for removing the card outlined below You can stop the memory card via the corresponding icon in the task bar gt Left click on the icon gt Select the card you want to stop and remove gt Press the Enter key L Wait for the dialogue box which tells

Download Pdf Manuals

Related Search

Related Contents

P5GD2 Pro  König CSNBBPT100BU backpack  Instalation Manual for Automated sites  SITRANS TH100 - Service, Support  MONOBLOCCO GHISA 750 - MONOBLOCCO  

Copyright © All rights reserved. Failed to retrieve file