Fujitsu S6120D User's Manual
Contents
1. Video Features When selected opens the Video Features submenu which allows setting of the display parameters including routing of video signals to different displays Internal Device When selected opens the Internal Device Configuration submenu which allows enabling or disabling the Configurations IDE LAN and modem controllers CPU Features When selected opens the CPU Features submenu which allows the user to modify the Intel R Speed Step R features USB Features Configures USB features Miscellaneous Configures miscellaneous features such as Wake Up On LAN and Power Button Configurations Event Logging When selected opens the event logging submenu 11 pa S Series Notebook BIOS Serial Parallel Port Configuration Submenu of the Advanced Menu The Serial Parallel Port Configuration submenu provides the ability to set the I O addresses and interrupt levels for the serial infrared and parallel ports of your notebook Points To prevent IRQ and address conflicts avoid changing the default settings If you must change the settings you can call 1 800 8Fujitsu for technical assistance The BIOS will warn you of resource conflicts by placing a yellow asterisk next to each device that is in conflict All I O addresses in Table 5 are in hexadecimal Y CAUTION I O addresses DMA channels and Interrupt levels can be entered in various ways including via the BIOS setup uti2. word is entered When both passwords are set the User password is always used to lock Password entry before OS boot is disabled upon unattended boot Boot from All All Enable password allows supervisor access only Removable Media m Supervisor only Hard Disk Security Configures hard disk security features Owner Sets Owner information Information Security Panel On Disabled Enabled Allows the Security Panel Feature to be enabled or disabled upon Resume Enabled Suspend from Resume 22 Hard Disk Security Submenu of the Security Menu The Hard Disk Security Submenu is for configuring hard disk security features PhoenixBIOS Setup Utility Hard Disk Security Item Specific Help Primary Master Password Is Clear Secondary Master Password Is Not Available Set Primary Master Password Enter Set Secondary Master Password Enter Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 14 Hard Disk Security Submenu Table 14 Fields Options and Defaults for the Hard Disk Security Submenu of the Security Menu Menu Field Default Description Primary Master A display only field Set is displayed when the Master Password is set and Clear when it is Password Is not Secondary Master A display only field Not Available is displayed Password Is Set Primary Enter Sets changes or cancels Primary Master Password The Prim
3. See Navigating Through the Setup Utility on page 2 for more information The following tables show the names of the menu fields for the Security menu and its submenus the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use The default condition is no passwords required and no write protection Y CAUTION Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning System Disabled to be displayed If this happens restart the computer by turning off and on the power with the power switch and use the correct password on reboot Point If you set a password write it down and keep it ina safe place If you forget the password you will have to contact your support representative to regain access to your secured functions and data If you make an error when re entering the password a Warning will be displayed on the screen To try again press the Enter key and then retype the pass word Press the Esc key to abort the password set ting process If the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Suspend or Save to Disk modes PhoenixBIOS Setup Utility Main Advanced Supervisor Password Is User Password Is Set Supervisor Password Set User Password Minimum User Password Length 0 Passwor
4. 26 INFO MENU DISPLAYS BASIC SYSTEM INFORMATION The Info menu is a display only screens that provides the configuration information for your notebook POINT The information including CPU type and speed and total memory displayed on this screen varies according to the unit you purchased The following table shows the names of the menu fields for the Info menu and the information displayed in those fields These fields are for information purposes only and are not editable PhoenixBIOS Setup Utility Main Advanced Security Item Specific Help BIOS Version 1 03 BIOS Date 03 31 2003 BIOS Area E000h FFFFh CPU Type Intel R Pentium R M CPU Speed 1 60 GHz L1 Cache 64 KB L2 Cache 1024 KB Total Memory 256 MB Memory Slot 1 None Memory Slot 2 256 MB DDR SDRAM Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 18 Info Menu Table 18 Fields Options and Defaults for the Info Menu Note that the parameters listed in the following table may be different depending upon your system configuration Menu Field Default Menu Field Default BIOS Version 1 03 L2 Cache 1024 KB BIOS Date 03 31 2003 Total Memory 256 MB BIOS Area EOOOh FFFFh Memory Slot 1 None CPU Type Intel R Pentium R M Memory Slot 2 256 MB DDR SDRAM L1 Cache 64 KB 27 ree S Series Notebook BIOS EXIT MENU LEAVING THE SETUP UTILITY The E
5. Clear Display only Information Is Set Owner Enter Field to write owner infor Information mation e g your name Foreground Black Red m Gray m Light Red Gray Set foreground color Color Blue m Magenta Light Blue m Light Magenta m Green m Brown m Light Green m Yellow Cyan m White m Light Cyan m Bright White Background Black Red m Gray m Light Red Black Sets background color Color Blue Magenta Light Blue Light Magenta m Green m Brown m Light Green m Yellow Cyan m White m Light Cyan m Bright White Exiting from the Security Menu When you have finished setting the parameters on the Security Menu you can either exit from setup utility or move to another menu If you wish to exit from setup utility press the Esc key to go to the Exit Menu If you wish to move to another menu use the cursor keys 24 BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE The Boot Menu is used to select the order in which the The following tables show the names of the menu fields BIOS searches sources for the operating system Follow for the Boot menu and its submenu all of the options the instructions for Navigating Through the Setup for each field the default settings and a description of Utility to make any changes See Navigating Through the the field s function and any special information needed Setup Utility on page 2 for more information to help understand the field s use PhoenixBIO
6. Cylinders A number between This item is active only when Hard Disk is selected as the type This field is changed by incrementing pressing the Spacebar or by typ ing in the number Menu Field Options Default Description Heads A number between This item is active only when Hard Disk is selected as type You can 1 and 16 change the value by incrementing pressing the Spacebar or by typing in the number Sectors A number between This item is active only when Hard Disk is selected as type You can O and 63 change the value by incrementing pressing the Spacebar or by typing in the number Maximum Display only Displays the maximum capacity of the drive calculated from the Capacity parameters of the hard disk when Auto is selected and the type is identified as hard disk Multi Sector Disabled 16 Sectors This option cannot be changed when Auto is selected Specify the Transfers m 2 Sectors number of sectors per block for multiple sector transfer m 4 Sectors 8 Sectors 16 Sectors LBA Mode Control Disabled Enabled Enables or disables logical Block Addressing in place of Cylinder Enabled Head Sector addressing This option cannot be changed when Auto is selected Transfer Mode Standard Multiword Selects the method for moving data to from the drive Autotype the m Fast PIO 1 DMA 2 drive to select the optimum transfer mode This option ca
7. too severe it will give you the opportunity to modify the settings of the setup utility as described in the following steps 1 When you turn on or restart the computer there is a beep and or the following message appears on the screen Error message please run SETUP program Press lt F1 gt key to continue lt F2 gt to run SETUP 2 Ifan error message is displayed on the screen and you want to continue with the boot process and start the operating system anyway press the F1 key Points If your notebook emits a series of beeps that sounds like a code and the display is blank please refer to the Troubleshooting section of your system Use s Guide The Troubleshooting Section includes a list of error messages and their meanings If your data security settings require it you may be asked for a password before the operating system will be opened 3 If an error message is displayed on the screen and you want to enter the setup utility press the F2 key 4 When the setup utility starts with a fault present the system displays the following message Warning Error message Continue 5 Press any key to enter the setup utility The system will then display the Main Menu with current parameters values po S Series Notebook BIOS MAIN MENU SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current system parameters Follow the instructions for Navi gating Through The Se
8. Cylinder Head Control Enabled Sector addressing This option cannot be changed when Auto is selected Table 3 Fields Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description Transfer Mode Standard Standard Selects the method for moving data to from the drive Autotype the m Fast PIO 1 drive to select the optimum transfer mode This option cannot be m Fast PIO 2 changed when Auto is selected m Fast PIO 3 m Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Ultra DMA Disabled Disabled Selects the method for moving data to from the drive Autotype the Mode Mode 0 drive to select the optimum transfer mode This option cannot be m Mode 1 changed when Auto is selected Mode 2 Mode 3 Mode 4 Mode 5 Exiting from Main Menu When you have finished setting the parameters on this menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key or use the cursor keys to go to the Exit menu or to move to another menu pan S Series Notebook BIOS ADVANCED MENU SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to Follow the instructions for Navigating Through the Set the I O addresses for the serial and parallel ports Setup Utility to make any changes a Set the features of the keyboard mouse Select between the display panel an
9. S Setup Utility Main Advanced Security Info Exit y Item Specific Help Quick Boot Enabled Boot Time Diagnostic Screen Disabled Disabled Preboot Execution Environment Disabled All diagnostic tests gt Boot Device Priority will be done Enabled Some diagnostic tests may be skipped while booting to speed up Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 16 Boot Menu Table 16 Fields Options and Defaults for the Boot Menu Menu Field Options Default Description Quick Boot Disabled Enabled Turns on and off booting with a truncated set of Power On Self Enabled Tests Fewer tests mean faster turn on Boot Time Disabled Disabled Turns on and off display of test results instead of Fujitsu logo screen Diagnostic Screen a Enabled during Power On Self Test Preboot Execution Disabled Disabled Turns on and off boot from network server options Environment E Enabled Boot Device Selects the Boot A This menu allows setting up the source for the operating system Priority Device Priority See Boot Device Priority Submenu in the following section submenu 25 po S Series Notebook BIOS The Boot Device Priority Submenu of the Boot Menu The Boot Device Priority Submenu is for setting the order of checking of sources for the operating system wy CAUTION Be aware of the operating environment when booting fro
10. age Defaults Load default configuration now Yes No When confirmed the setup utility will return to the Exit Menu To return to another menu follow the directions in the Navigating Through the Setup Utility Section Discard Changes Selecting Discard Changes will load the previous values in BIOS memory for all menu fields The message Load previous now Yes No will be displayed When confirmed the utility will return to the Exit menu To return to another menu follow the directions in the Navigating Through the Setup Utility Section Save Changes Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory The message Save configuration changes now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To go to another menu follow the directions in the Navigating Through the Setup Utility section 28
11. ary Master Password may be up Master Password to seven characters long and include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re enter New Password field When a Primary Master Password is set it must be used to access the hard disk Data on the hard disk cannot be read on other systems Set Secondary Enter Not currently available Master Password 23 poe S Series Notebook BIOS Owner Information Submenu of the Security Menu The Owner Information Submenu is for setting owner information Note that Owner Information cannot be set without having entered a supervisor s password PhoenixBI0S Setup Utility Owner Information Item Specific Help Owner Information Is Clear Press lt Enter gt key to set owner information Set Owner Information Enter Up to 80 characters can be set Available Foreground Color Gray characters are ASCII Background Color Black codes from 32 through 126 The owner information is always displayed at the bottom line of the screen during POST Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 15 Owner Information Submenu Table 15 Fields Options and Defaults for the Owner Information Submenu of the Security Menu Menu Field Options Default Description Owner
12. co Fujitsu Fujitsu LifeBook S Series BIOS Guide LifeBook S Series Model 56120 6120D Document Date 06 06 03 Document Part Number FPC58 0919 01 FUJITSU PC CORPORATION pa S Series Notebook BIOS S Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook Your BIOS is set at the factory for normal operating conditions therefore there should be no need to set or change the BIOS environment to operate your notebook The BIOS Setup Utility configures Device control feature parameters such as changing T O addresses and boot devices System Data Security feature parameters such as passwords Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following 1 Turn on or restart your notebook 2 Press the F2 key when a message appears under the Fujitsu logo prompting you to Press lt E2 gt BIOS Setup This will open the main menu of the BIOS Setup Utility with the current settings displayed 3 Press the arrow keys to scroll through the other setup menus to review or alter the current settings Navigating Through the Setup Utility The BIOS setup utility consists of six menus Main Advanced Security Boot Info and Exit This document explains each menu in turn including all submenus and setup items The following procedures allow you to navigate the setup utility menus 1 To select a menu use th
13. d on Boot On Automatic Wake up KB Lock on Resume Boot from Removable Media gt Hard Disk Security gt owner Information Security Panel On Resume Select Item Select Menu Boot Clear Clear Enter Enter Disabled Disabled Disabled A11 Change Values Select gt Sub Menu Exit Item Specific Help Press lt Enter gt key to set Supervisor Password to enable any password features Info Then password entry is required to enter BIOS Setup Enabled Setup Defaults Save and Exit Figure 13 Security Menu 21 LifeBook S Series Notebook BIOS Table 13 Fields Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor Clear A display only field Set is displayed when the system Supervisor Password is Password is set and Clear when it is not User Password is Clear A display only field Set is displayed when the general User Password is set and Clear when it is not Set Supervisor Enter Enter Sets changes or cancels Supervisor Password The Supervisor Password Password may be up to eight characters long and include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Pass word field and in the Re enter New Password field When a Supervisor Password is set it must be us
14. d or an external See Navigating Through the Setup Utility on page 2 for more information CRT display Set internal device configurations The following tables show the names of the menu fields Configure USB features for the Advanced Menu and its submenus all of the Configure miscellaneous features such as Wake Up On options for each field the default settings and a descrip LAN tion of the field s function and any special information Configure DMI Event Logging needed to help understand the field s use PhoenixBIOS Setup Utility Advanced Security Boot Info Exit Item Specific Help Configures serial ports and parallel ports gt Serial Parallel Port Configurations gt Keyboard Mouse Features gt Video Features gt Internal Device Configurations gt CPU Features p USB Features p gt Miscellaneous Configurations gt Event Logging Select Item Change Values Setup Defaults Select Menu Select Sub Menu Save and Exit Figure 4 Advanced Menu 10 Advanced Menu Table 4 Fields Options and Defaults for the Advanced Menu Menu Field Description Serial Parallel Port When selected opens the Serial Parallel Port Configurations submenu which allows the user to modify set Configurations tings for serial infrared and parallel ports Keyboard Mouse When selected opens the Keyboard Mouse Features submenu which allows setting external and internal Features keyboard and mouse parameters
15. e cursor keys gt 2 To select a field within a menu or a submenu use the cursor keys hy y 3 To select the different values for each field press the Spacebar to change to the next higher selection and F5 or to go to the next lower selection 4 To activate a submenu press the Enter key 5 To return to a menu from a submenu press the Esc key 6 To go to the Exit menu from any other menu press the Esc key Points Selecting a field causes a help message about that field to be displayed on the right hand side of the screen Pressing the Enter key with the highlight on a selec tion that is not a submenu or auto selection will cause a list of all options for that item to be displayed Pressing the Enter key again will select the high lighted choice 7 Pressing the F9 key resets all items in the BIOS to the default values 8 Pressing the F10 key saves the current configura tion and exits the BIOS Setup Utility You will be asked to verify this selection before it is executed 9 Pressing the F1 key gives you a general help screen Entering the Setup Utility After a Configuration Change or System Failure If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory or there is a failure in the system the system beeps and or displays an error message after the Power On Self Test POST If the failure is not
16. ed or by allowing the BIOS or OS to Auto choose the configuration Auto Mode Output Only Bi directional When the parallel port is enabled this option is available allowing the user m Bi directional to set the mode for the parallel port Bi directional allows two way m ECP transfer of information between your notebook and a parallel device Output Only Half Duplex allows information to be transferred in only one direction from your notebook to the printer or similar device ECP Mode allows communication with the ECP class of parallel 1 O devices I O Address m 378 37F 378 37F Allows user to set the parallel port base 1 O address when the parallel port 278 27F is Enabled m 3BC 3BF Interrupt IRQ5 IRQ 7 Allows user to set the parallel port interrupt when the parallel port is IRQ7 Enabled 13 ree S Series Notebook BIOS Keyboard Mouse Features Submenu of the Advanced Menu The Keyboard Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard PhoenixBIOS Setup Utility Advanced Keyboard Mouse Features Item Specific Help fauto Enabled Auto Disabled Fast Numlock Hot Plug Internal Pointing Device Initialization on Resume Selects power on state for Numlock Select Item Change Values Setup Defaults Select Menu Se lect gt Sub Menu Save and Exit Figure 6 Keyboard Mouse Features Submenu Table 6 Fields Op
17. ed to access the BIOS setup utility Set User Password Enter Enter This field can only be accessed if the Supervisor Password is set Sets changes or cancels the User Password The User Password may be up to eight characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re enter New Password field When a User Password is set it must be used to access the BIOS setup utility Minimum User 0 0 Sets the minimum length for User Password Password Length Password on Boot Disabled Disabled When Enabled a password User or Supervisor is required after the First Boot Power On Self Test POST before the operating system will be read from Every Boot a disk When set to Disabled no password is required If no Supervisor Password is set this feature is not available and no password is required On Automatic Disabled Disabled This field is active only when Password On Boot is set to First Boot or Wake up Enabled Every Boot When disabled password entry is not required on automatic wake up on LAN or Real Time Clock When enabled the password is still required on automatic wake up KB Lock on Disabled Disabled When set to Enabled the PS 2 keyboard and mouse inputs are locked Resume Enabled out upon Suspend from Resume or Save to Disk mode until the pass
18. efined configuration Enabled or by allowing the BIOS or OS to choose a Auto the configuration Auto 1 0 Address m 3F8 3FF 3F8 3FF Allows user to set the serial port base I O address when serial port is 2F8 2FF Enabled 3E8 3EF m 2E8 2EF Interrupt IRQ3 IRQ 4 Allows user to set the serial port interrupt when serial port is Enabled m IRQ4 IRQ10 m IRQ 11 Infrared Port Disabled Enabled Configures the infrared port using either no configuration Disabled a Enabled user defined configuration Enabled or by allowing the BIOS or OS to Auto choose the configuration Auto Mode IrDA FIR When the infrared port is enabled this option is available allowing FIR the user to set the mode for the infrared port I O Address m 3F8 3FF 2E8 2EF Allows user to set the infrared port 1 O address when the infrared port is a 2F8 2FF Enabled m 3E8 3EF E 2E8 2EF Interrupt IRQ3 IRQ 3 Allows user to set the infrared port interrupt when the infrared port is IRQ4 Enabled m IRQ10 m IRQ 11 I O Address 400 43F 400 43F Allows the user to select the 1 O address for Fast Infrared FIR 480 4BF m 500 53F 580 5BF DMA Channel DMA1 DMA 3 Allows user to set the infrared port DMA Channel when the infrared port DMA 3 is Enabled Parallel Port Disabled Enabled Configures the parallel port using either no configuration Disabled a Enabled user defined configuration Enabl
19. etween the segments with the Tab key and or Shift Tab keys System Date Sets and displays the current date Date is in a month day year numeric format with 2 digits each for month and day and 4 digits for year MM DD YYYY for example 03 20 1998 You may change each segment of the date separately Move between the segments with the Tab key and or Shift Tab keys Table 1 Fields Options and Defaults for the Main Menu Menu Field Options Default Description Primary Selects Primary The product of Display the type of device on this ATA ATAPI interface if there is Master Master submenu the Hard Drive one Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface Secondary Selects Secondary The product of Display the type of device on this ATA ATAPI interface if there is Master Master submenu the CD drive one Pressing the Enter key selects the Secondary Master submenu allowing additional device configuration options for this interface Language English US English US The default setting differs between the US European and the Japanese JP Japanese model Selects the display language for the BIOS poe S Series Notebook BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA devices are installed Note that actual hard drive
20. i EE Event Log Capacity Space Available Press lt Enter gt key to Event Log Validity Valid view the contents of the event log View Event Log Enter Event Logging Enabled System Boot Event Disabled Clear All Event Logs No Mark Events as Read Enter Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 12 Event Logging Submenu Table 12 Fields Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Options Default Description Event Log Space Available Display only Capacity Event Log Validity Valid Display only View Event Log Enter Enter Allows you to view content of event log Event Logging Disabled Enabled Turns event logging on and off for all DMI events Enabled System Boot Disabled Disabled Turns event logging on and off for DMI system boot events Event Enabled Clear All Event No No When set to Yes all event logs will be cleared at next boot Logs m Yes Mark Events as Enter Enter Allows you to make all events currently in the event log as read Read 20 SECURITY MENU SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration Follow the instructions for Navigating Through the Setup Utility to make any changes
21. label shown may vary Depending on the drive type information such as cylin ders heads and sectors may also be displayed PhoenixBIOS Setup Utility Primary Master FUJITSU MHS2030AT PM Item Specific Help Type Total Sectors Maximum Capacity Multi Sector Transfers LBA Mode Control Transfer Mode Ultra DMA Mode Auto LBA Format 58605120 30006MB 16 Sectors Enabled Multiword DMA 2 Disabled Select ATA ATAPI drive installed here Auto The BIOS auto types the drive on boot time Except Auto You enter parameters of Select Item Select Menu the drive None The drive is disabled Change Values Select gt Sub Menu Setup Defaults Save and Exit Figure 2 Primary Master Submenu Menu Field Options Default Description Type m Auto Auto Selects the ATA ATAPI device type Select Auto to have the type m None automatically identified by the BIOS at POST If None is selected all CD ROM of the following Set up items do not appear Select CD ROM if a A CD ROM drive is installed at this connection If Hard Disk is Hard Disk 8 e selected you must specify the number of Cylinders Heads and Sec tors for the drive LBA Format Logical Block Addressing LBA Total Sectors The total number of sectors on your hard disk O and 65 535 Maximum 2 3 The maximum capacity of your hard disk Capacity CHS Format Cylinders Heads Sectors
22. lity the control software for the I O device or the hardware If any two ports or devices serial or parallel have the same I O address assigned your notebook will not function normally Please keep a record of original settings before making any changes in the event that a restoration is required See your hardware and software documentation as well as the setup utility to determine settings limitations etc PhoenixBIOS Setup Utility Advanced Serial Parallel Port Configurations Item Specific Help Serial Port I O Address Interrupt Infrared Port Mode I O Address Interrupt I O Address DMA Channel Parallel Port Mode I O Address Interrupt Select Item Select Menu enabled 3F8 3FF IRQ 4 Enabled FIR 2E8 IRQ 3 400 DMA 3 Enabled Bi directional 378 37F IRQ 7 2EF 43F Change Values Select gt Sub Menu Disabled The port is disabled Enabled The port is enabled with user configuration Auto Plug amp Play OS configure the port Setup Defaults Save and Exit Figure 5 Serial Parallel Port Configuration Submenu 12 Advanced Menu Table 5 Fields Options and Defaults for Serial Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Default Description Serial Port Disabled Enabled Configures the serial port using either no configuration Disabled a user Enabled d
23. m a CD ROM or you may overwrite files by mistake PhoenixBIOS Setup Utility Boot Device Priority Item Specific Help Floppy Disk Drive Hard Disk Drive CD ROM Drive Keys used to view or configure devices lt Enter gt expands or collapses devices with a or lt Ctrl Enter gt expands all lt Shift 1 gt enables or disables a device lt gt lt Space gt or lt gt moves the device up or down lt d gt removes a device that is not installed Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 17 Boot Device Priority Submenu Table 17 Fields Options and Defaults for the Boot Device Priority Submenu of the Boot Menu Menu Field Description Floppy Disk Drive The boot selections determine the order in which the BIOS searches for the operating system during a startup sequence To change the order highlight one source by using the up or down cursor keys and then press the Hard Disk Drive or key to change the order number for that source Be sure to save your changed order when you exit the BIOS setup utility CD ROM Drive Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key to go to the Exit menu If you wish to move to another menu use the cursor keys
24. nnot be m Fast PIO 2 changed when Auto is selected m Fast PIO 3 m Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Ultra DMA Mode Disabled Disabled Selects the method for moving data to from the drive Autotype the m Mode O drive to select the optimum transfer mode This option cannot be m Mode 1 changed when Auto is selected Mode 2 Mode 3 Mode 4 Mode 5 Y CAUTION A bootable CD ROM may have either a floppy disk or hard drive format When the bootable CD ROM is used the drive allocations change automatically without changing the BIOS setup If a floppy disk format CD ROM is used the CD ROM becomes Drive A The CD ROM will only take drive C hard drive format if the internal hard drive is not present or is disabled The bootable CD ROM can never use a C designation if a formatted internal hard drive is present since the C designator is always reserved for the internal hard drive The boot sequence ignores the new drive designations however your application software will use the new designations Be careful of the operating environment when booting from a CD ROM or you may overwrite files by mistake ree S Series Notebook BIOS Secondary Master Submenu of the Main Menu The Secondary Master submenu is for the internal CD ROM drive The drive type is displayed on this menu as well as the Main menu Your notebook auto senses the characteristics of the internal drive installed You will not need t
25. o modify these settings they are displayed for your reference Note that actual drive labels shown may vary PhoenixBIOS Setup Utility Secondary Master CD 224E SM secondary Master 1cp 2248 0 ue eat isa Type auto Multi Sector Transfers Disabled LBA Mode Control Disabled Transfer Mode Ultra DMA Mode Standard Disabled Select Item Select Menu Select ATA ATAPI drive installed here Auto The BIOS auto types the drive on boot time Except Auto You enter parameters of the drive None The drive is disabled Change Values Setup Defaults Select gt Sub Menu Save and Exit Figure 3 Secondary Master Submenu Table 3 Fields Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description Type m Auto Auto Selects the ATA ATAPI device type Select Auto to have the type auto m None matically identified by the BIOS at POST If None is selected all of the CD ROM following Set up items do not appear Select CD ROM or Hard Disk for Hard Disk appropriate drive type installed at this connection Multi Sector Disabled Disabled This option cannot be changed when Auto is selected Specify the num Transfers m 2 Sectors ber of sectors per block for multiple sector transfer m 4 Sectors 8 Sectors m 16 Sectors LBA Mode Disabled Disabled Enables or disables Logical Block Addressing in place of
26. ption by decreasing CPU speeds On Battery Maximum Battery Optimized Allows the user to select the CPU performance when the system is Performance running on battery power m Battery Optimized m Automatic On AC m Maximum Maximum Allows the user to select the CPU performance when the system is Performance Performance running on AC power Battery Optimized Automatic 17 a S Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB Features Submenu configures the USB features for your system PhoenixBIOS Setup Utility Advanced USB Features Item Specific Help Legacy USB Support Enabled Disabled SCSI SubClass Support Disabled The feature is disabled Enabled Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 10 USB Features Submenu Table 10 Fields Options and Defaults for the ACPI Features Submenu of the Advanced Menu Menu Field Options Default Description Legacy USB Disabled Enabled When Disabled is selected legacy USB emulation is disabled When Support a Enabled Enabled is selected legacy USB emulation is enabled and USB devices are available without USB aware OS SCSI SubClass a Disabled Disabled When Enabled is selected USB devices that belong to the SCSI sub Support a Enabled class in
27. s Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 7 Video Features Submenu Table 7 Fields Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Options Default Description Display m Internal Flat Panel Auto Selects where the video signal will be routed External Auto Compensation Disabled Enabled Enables or disables display compensation Display com Enabled pensation is used to match the native resolution of the display with the input For example if you are using an application whose resolution causes it to appear smaller than the screen enabling Compensation will expand the image to fill the screen 15 poe S Series Notebook BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices PhoenixBIOS Setup Utility Advanced Internal Device Configurations Item Specific Help Disabled IDE Contoller No IDE ports are Modem Controller Enabled enabled LAN Controller Auto Primary Only primary IDE port is enabled Secondary Only secondary IDE port is enabled Both Both primary and secondary IDE ports are enabled Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 8 Internal Device Configuration Submenu Table 8 Fields Options and Defaults for the In
28. ternal Device Configuration Submenu of the Advanced Menu Menu Field Options Default Description IDE Controller Disabled Both Enables or disables selected IDE devices m Primary Secondary Both Modem Controller Disabled Enabled Enables or disables the modem device Enabled LAN Controller a Disabled Auto Enables or disables the LAN controller When Auto is selected the a Enabled LAN will be disabled when the system is running on battery power Auto and the LAN cable is not connected 16 Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features Submenu allows the user to modify the Intel R SpeedStep R Technology features PhoenixBIOS Setup Utility Advanced CPU Features Item Specific Help Select Enhanced SpeedStep R Technology Enabled Intel R SpeedStep R On Battery Battery Optimized Technology enabled or On AC Maximum Performance disabled Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 9 CPU Features Submenu Table 9 Fields Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Options Default Description SpeedStep R Disabled Enabled Enables or disables SpeedStep R Technology which allows the user Technology a Enabled to determine the CPU performance when the notebook is running on AC or battery This technology decreases power consum
29. the mass storage class e g USB Memory Key are enabled 18 Advanced Menu Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu configures miscellaneous features for your system PhoenixBIOS Setup Utility Advanced Miscellaneous Configurations Item Specific Help Power Button Configures the power Wake up on LAN Disabled button Volume Setting Middle ACPI OS ignores this setting Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 11 Miscellaneous Configurations Submenu Table 11 Fields Options and Defaults for the Miscellaneous Configurations Submenu Menu Field Options Default Description Power Button Disabled Disabled When Disabled is selected the power button does not respond to a Power Off press When Power Off is selected the button turns the power off Wake up on LAN Disabled Disabled When Enabled is selected the system will wake up when the internal Enabled LAN device receives a Magic Packet while the system is powered off Volume Setting Off Middle Allows you to set or disable the system volume level m Minimum Middle Maximum 19 fo S Series Notebook BIOS Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events PhoenixBIOS Setup Utility Advanced a ca
30. tions and Defaults for the Keyboard Mouse Submenu of the Advanced Menu Menu Field Options Default Description Numlock m Auto Auto Sets the NumLock function state when the computer completes On booting Off On Padlock Off Hot Plug Disabled Enabled Enables and disables the ability to plug a mouse or keyboard into Enabled the PS 2 port and have it immediately recognized and active Internal Pointing Auto Disabled Auto Disabled Sets the device controlling the mouse cursor on the screen Device Manual Setting Always Enabled makes the pointing device always enabled Always Enabled whether there is an external mouse or not Always Disabled makes Always Disabled the pointing device always disabled Auto Disabled disables the internal pointing device when an external pointing device is connected to the PS 2 port Manual Setting allows the device to be enabled or disabled using a Hot Key Initialization on m Fast Fast When Fast is selected initialization for the external PS 2 devices is Resume Normal optimized to speed up on Resume When Normal is selected initial ization is not optimized 14 Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters PhoenixBIOS Setup Utility Advanced Video Features Item Specific Help Display Select display terminal Compensation Enabled Select Item Change Value
31. tup Utility to make any changes See Navigating Through the Setup Utility on page 2 for more information The following tables show the names of the menu fields for the Main menu and its submenus all of the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use Note that the actual drive labels shown may vary Point System Time and System Date can also be set from your operating system without using the setup utility Use the calendar and time icon on your Windows Control panel or type time or date from the MS DOS prompt PhoenixBIOS Setup Utility Advanced Security WA 34 56 05 06 2003 System Time System Date gt Primary Master gt Secondary Master CD 224E SM Language English US Select Item Select Menu Figure 1 Change Values Select gt Sub Menu Boot Info Exit Item Specific Help Adjust calendar clock FUJITSU MHS2030AT PM lt Tab gt lt Shift Tab gt or lt Enter gt selects field Setup Defaults Save and Exit Main Menu Table 1 Fields Options and Defaults for the Main Menu Menu Field Options Default Description System Time Sets and displays the current time Time is in a 24 hour format of hours minutes seconds with 2 digits for each HH MM SS Example 16 45 57 You may change each segment of the time separately Move b
32. xit Menu is used to leave the setup utility Follow the instructions for Navigating Through the Setup Utility to make any changes See Navigating Through the Setup Utility on page 2 for more information The following table shows the names of the menu fields for the Exit menu the default settings and a description of the field s function and any special information needed to help understand the field s use PhoenixBIOS Setup Utility Main Advanced Security Boot Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Exit System Setup and save your changes to cmos Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 19 Exit Menu Table 19 Fields Options and Defaults for the Exit Menu Menu Field Description Exit Saving Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and Changes then exit the setup utility A confirmation message Save Configuration changes and exit now Yes No will be displayed Exit Discarding Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory When the Changes BIOS recognizes this selection it will load the operating system and begin operation Load Setup Selecting Load Setup Defaults will load the factory preset default values for all menu fields then display the mess
Download Pdf Manuals
Related Search